﻿1
00:00:02,218 --> 00:00:08,931
 [music]

2
00:00:08,931 --> 00:00:10,774
Now we're going
to take a look at

3
00:00:10,774 --> 00:00:13,425
SLAAC configuration or Stateless

4
00:00:13,425 --> 00:00:16,563
Address Automatic Configuration.

5
00:00:16,563 --> 00:00:18,748
The basic idea here, we're going

6
00:00:18,748 --> 00:00:21,186
to be using the
same topology that

7
00:00:21,186 --> 00:00:23,703
we used in our previous lesson.

8
00:00:23,703 --> 00:00:27,042
Again, we're going to
be focusing on VLAN 36.

9
00:00:27,042 --> 00:00:28,325
But this time, we're going to be

10
00:00:27,727 --> 00:00:30,260
looking more at the
router 6 side.

11
00:00:30,260 --> 00:00:33,447
Well actually, sort of both
router 3 and router 6.

12
00:00:35,351 --> 00:00:37,684
Basically what this
is going to be for

13
00:00:37,684 --> 00:00:40,897
is to have router
6 automatically

14
00:00:40,897 --> 00:00:44,367
pull its address from router 3.

15
00:00:44,367 --> 00:00:47,707
The basic idea, before
we jump too far

16
00:00:47,707 --> 00:00:50,304
into this as far
as configuration,

17
00:00:50,304 --> 00:00:52,083
stateless autoconfiguration,

18
00:00:52,083 --> 00:00:54,855
again is a replacement
so to speak -

19
00:00:54,855 --> 00:00:58,245
an alternative method maybe
is a better way to say it -

20
00:00:58,245 --> 00:01:01,545
for DHCP. and the idea is we can

21
00:01:01,545 --> 00:01:04,378
have a device
automatically learn

22
00:01:04,378 --> 00:01:05,769
certain information.

23
00:01:05,769 --> 00:01:07,833
The way SLAAC is right now,

24
00:01:07,833 --> 00:01:09,957
although I know there
have been some

25
00:01:09,957 --> 00:01:14,852
RFCs proposed to update SLAAC,

26
00:01:14,852 --> 00:01:17,494
but what you're
going to get so far

27
00:01:17,494 --> 00:01:19,798
is from your router
advertisement -

28
00:01:19,798 --> 00:01:20,690
and we're going to see this here

29
00:01:20,690 --> 00:01:21,874
in just a minute -

30
00:01:21,874 --> 00:01:24,775
but from your router
advertisement,

31
00:01:24,775 --> 00:01:28,695
you're going to get the prefix

32
00:01:28,695 --> 00:01:34,289
length and the global address
being advertised by the router.

33
00:01:34,289 --> 00:01:39,434
The client is going to take that
information and essentially make

34
00:01:39,434 --> 00:01:44,783
up his own client
portion of the address.

35
00:01:44,783 --> 00:01:46,455
You will then also
use the router

36
00:01:46,455 --> 00:01:49,107
advertisement to learn who your

37
00:01:49,107 --> 00:01:51,310
default gateway is.

38
00:01:51,310 --> 00:01:55,859
So for warehouse scanners

39
00:01:55,859 --> 00:01:58,764
and various sensors and so on,

40
00:01:58,764 --> 00:02:00,158
that's all fine.

41
00:02:00,158 --> 00:02:02,460
and that's what we're
going to start with here.

42
00:02:02,460 --> 00:02:04,248
The problem comes in of course,

43
00:02:04,248 --> 00:02:07,295
is if you need
actual DNS servers,

44
00:02:07,295 --> 00:02:08,123
things like that.

45
00:02:08,123 --> 00:02:11,059
That's where this
falls a little short,

46
00:02:11,059 --> 00:02:12,796
and where they're proposing

47
00:02:12,796 --> 00:02:18,710
to do some changes to the RFCs.

48
00:02:18,710 --> 00:02:20,875
So the first thing we're going
to take a look at is actually

49
00:02:20,875 --> 00:02:23,704
configuring the
IPv6 router side,

50
00:02:23,704 --> 00:02:25,115
and in our case, that's going to

51
00:02:25,115 --> 00:02:28,713
be router 3. So this is
where we left off before.

52
00:02:28,713 --> 00:02:30,268
I just want to show
you one thing here

53
00:02:30,268 --> 00:02:33,015
real quick that I did
do automatically

54
00:02:33,015 --> 00:02:36,150
before we started on
all these routers.

55
00:02:36,150 --> 00:02:42,888
If we were to say do show
run pipe include ipv6,

56
00:02:42,888 --> 00:02:47,064
just want you to see that
these devices automatic--

57
00:02:47,064 --> 00:02:48,057
not automatically.

58
00:02:48,057 --> 00:02:50,095
We had to enable
it, but I already

59
00:02:50,095 --> 00:02:52,979
turned on IPv6 unicast routing

60
00:02:52,979 --> 00:02:57,339
and IPv6 CEF. Now,
the IPv6 unicast

61
00:02:57,339 --> 00:02:59,649
routing wasn't really required

62
00:02:59,649 --> 00:03:01,376
for what we did in our
previous section,

63
00:03:01,376 --> 00:03:05,224
just assigning addresses
to interfaces and so on,

64
00:03:05,224 --> 00:03:08,142
no problem at all.
But as soon as

65
00:03:08,142 --> 00:03:10,840
you want to start doing routing,

66
00:03:10,840 --> 00:03:12,499
then of course,
you'll need that,

67
00:03:12,511 --> 00:03:14,132
and the reason I'm bringing this

68
00:03:14,132 --> 00:03:17,758
up here with SLAAC
is if I were to say,

69
00:03:17,758 --> 00:03:23,426
do debug ipv6 neighbor
discovery, or advertise.

70
00:03:23,426 --> 00:03:26,075
We can just do neighbor
discovery here.

71
00:03:26,075 --> 00:03:27,285
And as soon as we start looking

72
00:03:27,285 --> 00:03:29,297
at this, we're going to see that

73
00:03:29,297 --> 00:03:31,301
router 3 is already
sending out -

74
00:03:31,301 --> 00:03:34,664
there's the first
one right there -

75
00:03:34,664 --> 00:03:39,488
he is sending out a
router advertisement

76
00:03:39,488 --> 00:03:46,215
on his link local to--
and that the FF02::1,

77
00:03:46,215 --> 00:03:49,599
that is the all nodes
multicast address.

78
00:03:49,599 --> 00:03:53,928
So the FF02 means link local,
so it's a link local multicast,

79
00:03:53,928 --> 00:04:02,223
just on this segment, and ::1
on his FA00.36 interface,

80
00:04:02,223 --> 00:04:04,941
he advertises the MTU.

81
00:04:04,941 --> 00:04:08,594
He advertises the
prefix, and he also

82
00:04:08,594 --> 00:04:11,986
advertises a valid and
preferred lifetime.

83
00:04:11,986 --> 00:04:13,565
The valid lifetime is how

84
00:04:13,565 --> 00:04:15,559
long you're allowed
to use that prefix.

85
00:04:15,559 --> 00:04:18,273
The preferred lifetime is

86
00:04:18,273 --> 00:04:21,467
how long you originate traffic

87
00:04:21,467 --> 00:04:23,247
from that prefix.

88
00:04:23,247 --> 00:04:26,998
Now this, as you can see,
is happening automatically.

89
00:04:26,998 --> 00:04:28,609
I didn't have to do anything on

90
00:04:28,609 --> 00:04:32,640
router 3 except
make it a router.

91
00:04:32,640 --> 00:04:36,871
As soon as you turn on
IPv6 unicast routing,

92
00:04:36,871 --> 00:04:39,756
you're going to get router

93
00:04:39,756 --> 00:04:42,046
advertisements going
out the interface.

94
00:04:42,046 --> 00:04:45,176
Now, if I said IPv6?

95
00:04:45,176 --> 00:04:46,732
on the interface,

96
00:04:46,732 --> 00:04:48,969
there's quite a few
things here we can do,

97
00:04:48,969 --> 00:04:54,334
of course. Most of this going to

98
00:04:54,334 --> 00:04:55,740
be that we're talking
about right now,

99
00:04:55,740 --> 00:04:58,157
is going to be on the
neighbor discovery.

100
00:04:58,157 --> 00:05:01,228
So if we said ipv6
neighbor discovery

101
00:05:01,228 --> 00:05:02,180
is the thing we're going to

102
00:05:02,180 --> 00:05:04,197
focus on right this second.

103
00:05:04,197 --> 00:05:07,925
Couple of things we
can do: first one

104
00:05:07,925 --> 00:05:10,720
is the RA, which is the router

105
00:05:10,720 --> 00:05:12,116
advertisement message
we're talking

106
00:05:12,116 --> 00:05:13,764
about right now.

107
00:05:13,764 --> 00:05:18,088
And a couple of things
you can do: first off,

108
00:05:18,088 --> 00:05:23,950
you can change the lifetime,
you can change the interval,

109
00:05:23,950 --> 00:05:27,922
hop limit of how far it'll
go, of course the MTU.

110
00:05:27,922 --> 00:05:30,022
And if you didn't
want to do this,

111
00:05:30,022 --> 00:05:30,710
because a lot of people look

112
00:05:30,710 --> 00:05:33,828
at this and go, What
if I'm going to use

113
00:05:33,828 --> 00:05:35,479
some other method
to configure this?

114
00:05:35,479 --> 00:05:38,409
I don't want this neighbor

115
00:05:38,409 --> 00:05:40,740
discovery and router
advertisement message,

116
00:05:40,740 --> 00:05:43,233
then you can suppress it.

117
00:05:43,233 --> 00:05:44,995
I will say this, though.

118
00:05:44,995 --> 00:05:47,391
Before you choose
to suppress the

119
00:05:47,391 --> 00:05:49,602
router advertisement messages,

120
00:05:49,602 --> 00:05:53,487
you really need to think through
what you're doing here.

121
00:05:53,487 --> 00:05:56,811
The reason I say
that is, when we

122
00:05:56,811 --> 00:06:00,298
get to DHCP a little bit later,

123
00:06:00,298 --> 00:06:01,562
you're going to discover that

124
00:06:01,562 --> 00:06:03,853
there's no option
to advertise your

125
00:06:03,853 --> 00:06:09,623
default gateway or default
router in DHCP in IPv6,

126
00:06:09,623 --> 00:06:14,457
that's gone. Your default
gateway next hop,

127
00:06:14,457 --> 00:06:16,404
whatever you want to
call, it is going

128
00:06:16,404 --> 00:06:20,240
to come from a router
advertisement message.

129
00:06:20,240 --> 00:06:22,345
So before you do shut this off,

130
00:06:22,345 --> 00:06:25,419
you probably don't want to

131
00:06:25,419 --> 00:06:28,150
just do that unless
you know why.

132
00:06:28,150 --> 00:06:30,330
But we can suppress it, we can

133
00:06:30,330 --> 00:06:31,619
change the interval
to make it run

134
00:06:31,619 --> 00:06:34,947
a little faster. As you can see
it doesn't go very often here.

135
00:06:34,947 --> 00:06:37,492
It doesn't really
need to because

136
00:06:37,492 --> 00:06:39,691
when the client comes online,

137
00:06:39,691 --> 00:06:44,117
it will send out a
solicitation message.

138
00:06:44,117 --> 00:06:46,505
In fact, rather than
speeding it up,

139
00:06:46,505 --> 00:06:47,615
because it gets a little harder

140
00:06:47,615 --> 00:06:49,904
to tell here, I'm
going to let it go

141
00:06:49,916 --> 00:06:52,093
a little bit slower
for right now,

142
00:06:52,093 --> 00:06:53,880
and as we bring up router 6

143
00:06:53,880 --> 00:06:56,499
as the client, we
can see that it's

144
00:06:56,499 --> 00:06:58,560
not like the client
is really going

145
00:06:58,560 --> 00:06:59,422
to sit there, and
by the way when

146
00:06:59,422 --> 00:07:01,343
I said it's slow,

147
00:07:01,343 --> 00:07:08,589
notice that this message
right here-- where was it?

148
00:07:08,589 --> 00:07:11,192
 I've looked at a couple
of things since then.

149
00:07:11,192 --> 00:07:16,105
Here's him advertising 36, and I
don't have date time stamps on.

150
00:07:16,105 --> 00:07:18,104
If you notice, he
hasn't advertised

151
00:07:18,104 --> 00:07:20,289
it for a while and the last one

152
00:07:20,289 --> 00:07:23,816
was way back up here where he

153
00:07:23,816 --> 00:07:26,973
advertised 36 when
we first started.

154
00:07:26,973 --> 00:07:29,205
We have some other
messages going on,

155
00:07:29,205 --> 00:07:31,748
but that's him advertising 36.

156
00:07:31,748 --> 00:07:34,188
There's him
advertising 36 again.

157
00:07:34,188 --> 00:07:42,867
Do show ipv6 interface FA0/0.36.

158
00:07:42,867 --> 00:07:47,122
The default is 200 seconds.

159
00:07:47,122 --> 00:07:48,482
Again, we could speed this up a

160
00:07:48,482 --> 00:07:50,784
little bit just to
show you how the

161
00:07:50,784 --> 00:07:53,150
command works.

162
00:07:53,150 --> 00:07:54,944
I didn't actually type it in.

163
00:07:59,344 --> 00:08:00,708
We could change this  to

164
00:08:00,708 --> 00:08:02,090
show you how it
works without going

165
00:08:02,090 --> 00:08:02,886
crazy with it.

166
00:08:02,886 --> 00:08:07,064
Let's just say once
every 30 seconds.

167
00:08:07,064 --> 00:08:08,959
Then if I look at the
interface again,

168
00:08:08,959 --> 00:08:11,669
that'll of course, trigger
it to go right away.

169
00:08:11,669 --> 00:08:15,810
Now, it's going
every 30 seconds.

170
00:08:15,810 --> 00:08:19,237
Now again, the reason I say
this isn't all that critical,

171
00:08:19,237 --> 00:08:23,634
honestly, is when the
client comes online,

172
00:08:23,634 --> 00:08:24,863
he's not just going
to have to sit

173
00:08:24,863 --> 00:08:27,234
there and wait until this guy

174
00:08:27,234 --> 00:08:28,867
sends an advertisement.

175
00:08:28,867 --> 00:08:30,671
That's not how it works.

176
00:08:30,671 --> 00:08:33,065
The only reason
that we even have

177
00:08:33,065 --> 00:08:35,864
these timed updates being sent

178
00:08:35,864 --> 00:08:39,889
every so often, is
in case you go and

179
00:08:39,889 --> 00:08:43,740
change the prefix
being advertised

180
00:08:43,740 --> 00:08:47,226
or you change the valid
and preferred lifetime.

181
00:08:47,226 --> 00:08:49,171
If you change any of that,

182
00:08:49,171 --> 00:08:50,798
then you're going to
want it to update

183
00:08:50,798 --> 00:08:52,736
the clients that have already

184
00:08:52,736 --> 00:08:55,537
gotten this information
previously.

185
00:08:55,537 --> 00:08:58,146
That's the only reason for
the timed update anyways.

186
00:08:58,146 --> 00:09:00,223
If it's not the fastest
thing in the world,

187
00:09:00,223 --> 00:09:02,595
the default's 200 seconds,

188
00:09:02,595 --> 00:09:03,876
a lot of people go,
I don't want a

189
00:09:03,876 --> 00:09:05,751
machine taking 200 seconds until

190
00:09:05,751 --> 00:09:06,446
it gets an address.

191
00:09:06,446 --> 00:09:08,435
That's not what this is for.

192
00:09:08,435 --> 00:09:12,490
This periodic
update is literally

193
00:09:12,490 --> 00:09:15,673
just to refresh anything.

194
00:09:15,673 --> 00:09:21,814
So if I were to, again,
just for an example,

195
00:09:21,814 --> 00:09:24,363
say instead of
interval, we could

196
00:09:24,375 --> 00:09:26,635
say-- let's take a look here.

197
00:09:26,635 --> 00:09:31,339
Let's do lifetime.

198
00:09:31,339 --> 00:09:35,189
So we'll say it's the
lifetime-- I'm sorry.

199
00:09:35,189 --> 00:09:36,332
That's just for the
router advertisement.

200
00:09:36,332 --> 00:09:38,855
We need to do prefix for
the one I'm looking at.

201
00:09:38,855 --> 00:09:44,207
So we'll say prefix, and
then we'll say default,

202
00:09:44,207 --> 00:09:49,600
and set the valid lifetime.

203
00:09:49,600 --> 00:09:51,588
So just for the sake of
something to do here,

204
00:09:51,588 --> 00:09:54,498
we'll say-- we're going to
say it's valid for 600.

205
00:09:54,498 --> 00:09:56,373
This is of course in seconds.

206
00:09:56,373 --> 00:09:58,136
So that'd be 10 minutes.

207
00:09:58,136 --> 00:10:01,005
It's preferred for
five minutes. So if

208
00:10:01,017 --> 00:10:03,677
we just change
something like that,

209
00:10:03,677 --> 00:10:08,450
next interval - there we go -
we'll see these get changed.

210
00:10:08,450 --> 00:10:09,131
And by the way, you might have

211
00:10:09,131 --> 00:10:13,368
noticed too, as soon
as I changed it,

212
00:10:13,368 --> 00:10:17,199
notice that the IOS just kicked
off another update anyway,

213
00:10:17,199 --> 00:10:20,390
so it's not even-- a lot
of changes you make

214
00:10:20,390 --> 00:10:21,999
are going to trigger

215
00:10:21,999 --> 00:10:26,903
an update anyway, even if
it's not the 30 seconds yet.

216
00:10:26,903 --> 00:10:29,091
But in any case--
so here's router 3

217
00:10:29,091 --> 00:10:31,485
over here, advertising
the information.

218
00:10:31,485 --> 00:10:33,381
Now let's go take a look
at the client side.

219
00:10:33,381 --> 00:10:35,887
So let's go over to router
6 and we're going to say,

220
00:10:35,887 --> 00:10:40,904
ipv6 address, and the
command is auto config.

221
00:10:40,904 --> 00:10:42,901
Now, just so you know, before I

222
00:10:42,901 --> 00:10:47,651
type this - do show
ipv6 interface brief -

223
00:10:47,651 --> 00:10:49,015
he's going to have no address.

224
00:10:49,015 --> 00:10:53,380
We're looking at this interface
right here once again.

225
00:10:53,380 --> 00:10:54,539
And I just want you guys to

226
00:10:54,539 --> 00:10:59,220
understand that if
this were Windows,

227
00:10:59,220 --> 00:11:02,774
Linux, MAC, just about any other

228
00:11:02,774 --> 00:11:05,654
desktop operating
system out there,

229
00:11:05,654 --> 00:11:08,746
end device, anything like that,

230
00:11:08,746 --> 00:11:11,523
assuming of course
it's IPv6 enabled,

231
00:11:11,523 --> 00:11:15,861
it would've already pulled
this information, most likely.

232
00:11:15,861 --> 00:11:18,570
Most things are
automatically set

233
00:11:18,570 --> 00:11:21,212
up to do SLAAC and
they'd already

234
00:11:21,212 --> 00:11:25,100
be going. You'd already
be done. But the router,

235
00:11:25,100 --> 00:11:28,984
 understandably I hope,

236
00:11:28,984 --> 00:11:31,729
is sort of designed
to be a router,

237
00:11:31,729 --> 00:11:33,661
not an end device,

238
00:11:33,661 --> 00:11:36,574
and therefore you have
to actually tell it,

239
00:11:36,574 --> 00:11:41,966
you know what, get your
address from auto config.

240
00:11:41,966 --> 00:11:43,833
Soon as we do that,
if we hop over

241
00:11:43,833 --> 00:11:45,135
to router 3, we should've seen--

242
00:11:45,135 --> 00:11:49,588
there we go. So this
is the other guy

243
00:11:49,588 --> 00:11:51,822
sending a router advertisement--

244
00:11:51,822 --> 00:11:54,746
oh, here we go. I wasn't
looking up far enough,

245
00:11:54,746 --> 00:11:58,735
I was looking for the solicit
message, there it is.

246
00:11:58,735 --> 00:12:01,655
Sending a solicited RA.

247
00:12:01,655 --> 00:12:04,261
Notice, he didn't wait
for a time or anything.

248
00:12:04,261 --> 00:12:07,406
Right here, he received an RS,

249
00:12:07,406 --> 00:12:10,122
which is a router
solicitation message.

250
00:12:10,122 --> 00:12:12,185
So he received the
router solicitation

251
00:12:12,185 --> 00:12:15,482
on his interface from ::.

252
00:12:15,482 --> 00:12:18,333
Basically, it's from--
the guy doesn't know.

253
00:12:18,333 --> 00:12:19,571
He's saying, Who's the router?

254
00:12:19,571 --> 00:12:21,755
I need to know
what my prefix is.

255
00:12:21,755 --> 00:12:24,080
Basically he's saying,
I know nothing.

256
00:12:24,080 --> 00:12:25,704
So I, of course, send him that

257
00:12:25,704 --> 00:12:28,935
information right
away and that's it.

258
00:12:28,935 --> 00:12:30,018
Now the rest of this, of course,

259
00:12:30,018 --> 00:12:32,407
is going on with some
other information.

260
00:12:32,407 --> 00:12:33,767
But you can see,

261
00:12:33,767 --> 00:12:35,192
that's the important part I want

262
00:12:35,192 --> 00:12:42,326
to show you right now is that,
we got the information.

263
00:12:42,326 --> 00:12:45,992
Do show ipv6 interface brief,

264
00:12:45,992 --> 00:12:52,160
and he's pulled that
prefix from router 3.

265
00:12:52,160 --> 00:12:53,915
Now, something else you may

266
00:12:53,915 --> 00:12:56,019
want to do-- and
this sort of goes

267
00:12:56,019 --> 00:12:58,077
back to our previous
lesson, and this

268
00:12:58,089 --> 00:12:59,996
is completely
optional, of course.

269
00:12:59,996 --> 00:13:02,484
There's two things here
that are optional.

270
00:13:02,484 --> 00:13:05,655
First, you might want
to control the address.

271
00:13:05,655 --> 00:13:07,545
Because again, that's not the

272
00:13:07,545 --> 00:13:10,904
prettiest host address
in the world,

273
00:13:10,904 --> 00:13:13,068
especially if this is a router.

274
00:13:13,068 --> 00:13:15,052
You're going to be
doing traces and

275
00:13:15,052 --> 00:13:16,256
you're going to be doing pings,

276
00:13:16,256 --> 00:13:18,696
and you're going to
be doing network

277
00:13:18,696 --> 00:13:20,903
diagnostic and troubleshooting.

278
00:13:20,903 --> 00:13:22,760
If that's an end
device, if that's

279
00:13:22,760 --> 00:13:27,052
Sally's workstation out in
accounting or something,

280
00:13:27,052 --> 00:13:31,328
just like DHCP, we don't really
care what it's address is.

281
00:13:31,328 --> 00:13:35,233
But this is the device we may
actually have to troubleshoot.

282
00:13:35,233 --> 00:13:37,957
So you may not--
you may want to--

283
00:13:37,957 --> 00:13:39,618
a lot of times with our routers,

284
00:13:39,618 --> 00:13:41,455
I'm sure you all
understand this,

285
00:13:41,455 --> 00:13:43,590
that we would
literally just have

286
00:13:43,590 --> 00:13:45,331
them all statically assigned.

287
00:13:45,331 --> 00:13:47,629
But in the interest of showing
you all the different options,

288
00:13:47,629 --> 00:13:49,215
we're not going to do that.

289
00:13:49,215 --> 00:13:51,375
So we can combine this,

290
00:13:51,375 --> 00:13:57,878
what we looked at before though,
and say ipv6 address FE80::6,

291
00:13:57,878 --> 00:14:03,365
link local, and actually control

292
00:14:03,365 --> 00:14:06,897
that he's getting
this part from SLAAC,

293
00:14:06,897 --> 00:14:10,845
but then since we hard coded
the link local address,

294
00:14:10,845 --> 00:14:13,930
and therefore his
IPv6 client ID,

295
00:14:13,930 --> 00:14:16,267
we've now also controlled what

296
00:14:16,267 --> 00:14:20,536
his host portion is going to
be for that SLAAC address.

297
00:14:20,536 --> 00:14:26,428
So that's one optional
thing we could do.

298
00:14:26,428 --> 00:14:28,960
The other thing we can do is

299
00:14:28,960 --> 00:14:33,304
actually control
that default route.

300
00:14:33,304 --> 00:14:34,980
Remember we said
with SLAAC - and let

301
00:14:34,992 --> 00:14:36,679
me switch back over
here real quick -

302
00:14:36,679 --> 00:14:39,801
we're looking right now of
course at configuring the

303
00:14:39,801 --> 00:14:41,212
client device.

304
00:14:41,212 --> 00:14:42,669
That's the main thing.

305
00:14:42,669 --> 00:14:44,946
The client device
should be getting

306
00:14:44,946 --> 00:14:46,524
some basic information here.

307
00:14:46,524 --> 00:14:49,578
It needs to get the prefix,
which we've gotten - check.

308
00:14:49,578 --> 00:14:51,777
It needs to get the
prefix length.

309
00:14:51,777 --> 00:14:54,641
/64 in our case - check.

310
00:14:54,641 --> 00:14:58,552
It needs to get-- well,
see here's the next part.

311
00:14:58,552 --> 00:15:03,151
 It needs to get its default
gateway or its default router.

312
00:15:03,151 --> 00:15:06,977
Now, again, in the
case of a normal

313
00:15:06,977 --> 00:15:10,803
desktop operating
system end device

314
00:15:10,803 --> 00:15:15,785
acting like a SLAAC client,
we'd probably be done.

315
00:15:15,785 --> 00:15:21,309
Once again, because this is a
router, we're not going to be.

316
00:15:21,309 --> 00:15:22,641
I'm going to show you
that in one second,

317
00:15:22,641 --> 00:15:24,455
but just real quickly
here, I wanted

318
00:15:24,455 --> 00:15:26,192
to show you what we're doing

319
00:15:26,192 --> 00:15:28,088
right now, of course, is how we

320
00:15:28,088 --> 00:15:30,072
control the host
portion with the

321
00:15:30,072 --> 00:15:31,957
link local address.

322
00:15:31,957 --> 00:15:34,468
Here's the thing with
the default gateway.

323
00:15:34,468 --> 00:15:40,479
If I now said do
show ipv6 route,

324
00:15:40,479 --> 00:15:45,284
notice that he's got the /64,

325
00:15:45,284 --> 00:15:50,318
and if you look at your legend
up top, notice that ND--

326
00:15:50,318 --> 00:15:52,699
sorry, I'm highlighting
the wrong thing,

327
00:15:52,699 --> 00:15:54,558
NDP is that he learned that from

328
00:15:54,558 --> 00:15:56,843
a neighbor discovery prefix.

329
00:15:56,843 --> 00:15:59,374
What he does not
have, and you're

330
00:15:59,374 --> 00:16:01,197
going to look over the
routing table here,

331
00:16:01,197 --> 00:16:05,904
these are all locally
connected interfaces.

332
00:16:05,904 --> 00:16:07,913
That's, of course, the interface

333
00:16:07,913 --> 00:16:10,949
that we're talking
about right now.

334
00:16:10,949 --> 00:16:13,780
And I know you guys
don't have the

335
00:16:13,780 --> 00:16:15,721
diagram right in front of you,

336
00:16:15,721 --> 00:16:21,409
but that is the VLAN 69
interface - both of those.

337
00:16:21,409 --> 00:16:23,796
This, of course,
is his loopback,

338
00:16:23,796 --> 00:16:26,552
and this is simply for
multicast traffic.

339
00:16:26,552 --> 00:16:30,554
Anything starting with
FF/8 is multicast.

340
00:16:30,554 --> 00:16:34,906
So that's just basically telling
him to receive any multicast

341
00:16:34,906 --> 00:16:36,645
it comes to meet.

342
00:16:36,645 --> 00:16:39,992
What we don't have
is a :: route.

343
00:16:39,992 --> 00:16:42,179
We don't have a default route.

344
00:16:42,179 --> 00:16:43,589
And again, this
sort of goes back

345
00:16:43,589 --> 00:16:45,415
to the fact that
this is a router,

346
00:16:45,415 --> 00:16:48,264
not a client. And it's
basically sitting there going,

347
00:16:48,264 --> 00:16:49,269
I'm a router.

348
00:16:49,269 --> 00:16:51,283
I should have routes.

349
00:16:51,283 --> 00:16:52,276
I'm not client.

350
00:16:52,276 --> 00:16:54,777
I don't just go to
the default route.

351
00:16:54,777 --> 00:16:56,897
But if you want
it to, going back

352
00:16:56,897 --> 00:16:58,189
up to our command where we put

353
00:16:58,189 --> 00:17:01,382
the address in, auto-config,

354
00:17:01,382 --> 00:17:03,290
there's another
choice on this which

355
00:17:03,290 --> 00:17:07,843
is to add default to it and
actually get a default route.

356
00:17:07,843 --> 00:17:12,139
If we do that, then
it will insert

357
00:17:12,139 --> 00:17:14,966
the default route into
the routing table.

358
00:17:14,966 --> 00:17:18,181
Let's give it a second here.

359
00:17:18,181 --> 00:17:19,709
We may have to
actually bounce the

360
00:17:19,709 --> 00:17:21,150
interface to get
it to do it again.

361
00:17:21,150 --> 00:17:22,457
Now there we go.

362
00:17:22,457 --> 00:17:24,959
Usually it kicks in, but I'm not

363
00:17:24,959 --> 00:17:27,027
patient so I often
just bounce the

364
00:17:27,027 --> 00:17:28,309
interface quick.

365
00:17:28,309 --> 00:17:33,964
There we go. There's your ::/0,
otherwise known as a default.

366
00:17:33,964 --> 00:17:36,561
It is from neighbor discovery.

367
00:17:36,561 --> 00:17:40,082
That is your ND default,
neighbor discovery default.

368
00:17:40,082 --> 00:17:44,130
By the way, also notice
that it gives it a very,

369
00:17:44,130 --> 00:17:49,008
very good admin distance,
and of course,

370
00:17:49,008 --> 00:17:51,268
the metric is 0 because
it's conneted.

371
00:17:51,268 --> 00:17:52,156
These are going to be

372
00:17:52,156 --> 00:17:54,126
really very believable
routes when

373
00:17:54,126 --> 00:17:59,367
it comes to comparing this
to other routing protocols.

374
00:17:59,367 --> 00:18:01,678
What we don't have at this point

375
00:18:01,678 --> 00:18:08,810
is if I said do show
ipv6 dhcp interface

376
00:18:08,810 --> 00:18:17,744
gigabit 00.36 is-- we're not
getting this from DHCP.

377
00:18:17,744 --> 00:18:19,216
In a couple of minutes, this is

378
00:18:19,216 --> 00:18:21,824
going to change a
little bit in our

379
00:18:21,824 --> 00:18:26,057
next lesson. For right now,
that's it, that SLAAC.

380
00:18:26,057 --> 00:18:27,728
It's pretty straightforward.

381
00:18:27,728 --> 00:18:34,184
The big thing to remember, of
course, is that it's not DHCP.

382
00:18:34,184 --> 00:18:37,699
All you're getting is
a prefix, a prefix

383
00:18:37,711 --> 00:18:40,635
length, and your
default gateway.

384
00:18:40,635 --> 00:18:43,828
The host portion, you
make up yourself,

385
00:18:43,828 --> 00:18:46,489
and as far as any other options

386
00:18:46,489 --> 00:18:50,206
that you would normally get from
DHCP, then this is not going to

387
00:18:50,206 --> 00:18:52,011
give you those options.

388
00:18:52,011 --> 00:18:57,370
[music]

