WEBVTT

0:00:08.160000 --> 0:00:13.640000
 Okay, we're going to start talking now about
 some of our transition mechanisms.

0:00:13.640000 --> 0:00:18.680000
 Specifically, we're going to talk about
 tunnels and we're going to talk

0:00:18.680000 --> 0:00:24.320000
 about just running dual stack, which
 is a fairly short conversation, but

0:00:24.320000 --> 0:00:25.900000
 we'll wrap up with that.

0:00:25.900000 --> 0:00:30.880000
 Tunnels, though, we have quite a few
 different choices that we're going

0:00:30.880000 --> 0:00:36.660000
 to go through. So, choice number one is
 just a standard GRE, generic routing

0:00:36.660000 --> 0:00:39.280000
 encapsulation tunnel.

0:00:39.280000 --> 0:00:46.000000
 And we can run, you know, IPv4
 over IPv4, IPv6 over IPv4.

0:00:46.000000 --> 0:00:49.700000
 That's of course the one we're going
 to be looking at is a way to get

0:00:49.700000 --> 0:00:57.500000
 IPv6 transported through an IPv4-only
 network inside of a GRE tunnel.

0:00:57.500000 --> 0:00:59.940000
 Very simple, very straightforward.


0:00:59.940000 --> 0:01:05.020000
 That will actually probably be
 a very, very short lesson.

0:01:05.020000 --> 0:01:08.340000
 Then we have IPv6 IP tunnels.

0:01:08.340000 --> 0:01:12.260000
 This is a very, very short,
 again, transition.

0:01:12.260000 --> 0:01:15.240000
 I'll probably do these two
 in one lesson actually.

0:01:15.240000 --> 0:01:23.480000
 GRE and IPv6 IP just the
 generic IPv6 IP tunnels.

0:01:23.480000 --> 0:01:28.700000
 And then those, from there, we're going
 to move into some of the other

0:01:28.700000 --> 0:01:38.000000
 IPv6 and understand IPv6 IP also
 includes six to four tunnels.

0:01:38.000000 --> 0:01:41.880000
 Okay? That is a type
 of IPv6 IP tunnel.

0:01:41.880000 --> 0:01:46.700000
 So now we're starting to get into some
 specifics under IPv6 IP tunnel

0:01:46.700000 --> 0:01:51.520000
 types. As we're going down here, basically
 what we're saying is, okay,

0:01:51.520000 --> 0:01:55.600000
 you've got GRE, which means you're going
 to have the IPv4 header followed

0:01:55.600000 --> 0:02:01.400000
 by a GRE header, followed by
 an IPv6 header on the inside.

0:02:01.400000 --> 0:02:06.760000
 And because we have a GRE header, the
 GRE header has a type field in it.

0:02:06.760000 --> 0:02:11.360000
 That allows us to
 run IPv4 and IPv6.

0:02:11.360000 --> 0:02:15.360000
 And I mean, I guess if you still care
 at IPX, SPX or DeckNet or something

0:02:15.360000 --> 0:02:19.980000
 over that same tunnel, if your code
 even still supports that stuff.

0:02:19.980000 --> 0:02:25.960000
 But the point is we can run multiple
 protocols over the same tunnel.

0:02:25.960000 --> 0:02:33.020000
 When you go to IPv6 IP tunnel, you're
 simply eliminating the GRE header.

0:02:33.020000 --> 0:02:36.380000
 And just in the interest of looking
 at MTU and all that kind of stuff,

0:02:36.380000 --> 0:02:38.840000
 I think we will still
 separate those out.

0:02:38.840000 --> 0:02:43.200000
 But the point is all we're really doing
 is eliminating the GRE header

0:02:43.200000 --> 0:02:47.420000
 by saying, you know what, the only thing
 I'm going to run over this tunnel

0:02:47.420000 --> 0:02:53.360000
 is IPv6. So why do I need another header
 to tell me what the next protocol

0:02:53.360000 --> 0:03:00.400000
 is if I just tell both sides, hey,
 the next protocol, the layer three

0:03:00.400000 --> 0:03:03.260000
 protocol here is IPv6.

0:03:03.260000 --> 0:03:06.060000
 I don't need GRE to
 tell me it's IPv6.

0:03:06.060000 --> 0:03:10.480000
 I'm going to program you
 to know that it's IPv6.

0:03:10.480000 --> 0:03:18.680000
 Now, the problem with GRE and IPv6 IP
 by itself is those are both static

0:03:18.680000 --> 0:03:21.680000
 point-to-point tunnels.

0:03:21.680000 --> 0:03:23.400000
 Well, that's great.

0:03:23.400000 --> 0:03:30.860000
 Right up until you have 200 remote
 sites, 400, 1000, whatever.

0:03:30.860000 --> 0:03:38.720000
 It gets quite a bit tedious if
 you have too many remote sites.

0:03:38.720000 --> 0:03:43.900000
 So as we move into 6 to 4, the idea was,
 well, here's a way to dynamically

0:03:43.900000 --> 0:03:45.340000
 build the tunnels.

0:03:45.340000 --> 0:03:50.480000
 So these are going to be dynamic
 multi-point tunnels.

0:03:50.480000 --> 0:03:55.260000
 And then you also have ISA TAP, which
 is the same thing, dynamic multi

0:03:55.260000 --> 0:03:59.100000
-point tunnels, little
 easier to configure.

0:03:59.100000 --> 0:04:03.140000
 I don't know, I like to sort of refer
 to them as the progression from

0:04:03.140000 --> 0:04:07.560000
 6 to 4. I'm not sure if that's technically
 accurate or not, but they're

0:04:07.560000 --> 0:04:09.320000
 certainly easier to configure.

0:04:09.320000 --> 0:04:10.860000
 That's for certain.

0:04:10.860000 --> 0:04:15.140000
 And then we'll get into MPLS.

0:04:15.140000 --> 0:04:21.320000
 Now, MPLS, of course, is just another
 way of transporting packets without

0:04:21.320000 --> 0:04:24.360000
 doing IP forwarding.

0:04:24.360000 --> 0:04:29.940000
 So this is again going to be an IPv4
 core with IPv6 running over top of

0:04:29.940000 --> 0:04:33.420000
 it. And we'll look at that from
 two different perspectives.

0:04:33.420000 --> 0:04:40.740000
 We'll look at it from 6PE, which would
 be more of an enterprise type solution.

0:04:40.740000 --> 0:04:46.640000
 And then we'll look at it from a 6VPE,
 which could also be enterprise.

0:04:46.640000 --> 0:04:48.880000
 It depends on how you're
 running your network.

0:04:48.880000 --> 0:04:53.640000
 But definitely what the service
 provider would be doing.

0:04:53.640000 --> 0:04:57.820000
 Service provider is not going to do
 6PE, because that does not support

0:04:57.820000 --> 0:04:58.940000
 multiple customer.

0:04:58.940000 --> 0:05:03.360000
 That would just be, like I said, one
 enterprise doing this in your core.

0:05:03.360000 --> 0:05:09.800000
 So that's another way to get 6 through
 another protocol like IPv4.

0:05:09.800000 --> 0:05:15.820000
 In this case, instead of using GRE and
 tunnel encapsulation, using MPLS

0:05:15.820000 --> 0:05:18.120000
 for our transport.

0:05:18.120000 --> 0:05:22.520000
 And last but not least, we will look
 at GRE multi-point, which is, of

0:05:22.520000 --> 0:05:28.700000
 course, DMVPN. So we'll be taking a
 look at each one of these types of

0:05:28.700000 --> 0:05:32.080000
 tunnels one at a time
 as we go through.

