﻿1
00:00:02,288 --> 00:00:08,386
[music]

2
00:00:08,386 --> 00:00:13,742
We're going to start talking now about
some of our transition mechanisms.

3
00:00:13,816 --> 00:00:18,486
Specifically, we're going to talk
about tunnels, and we're going to

4
00:00:18,486 --> 00:00:24,154
talk about just running dual stack,
which is a fairly short conversation,

5
00:00:24,154 --> 00:00:25,952
but we'll wrap up with that.

6
00:00:25,952 --> 00:00:30,352
Tunnels, though, we have quite
a few different choices

7
00:00:30,352 --> 00:00:31,989
that we're going to go through.

8
00:00:31,989 --> 00:00:36,036
Choice number one is just a standard GRE,

9
00:00:36,036 --> 00:00:43,544
Generic Routing Encapsulation tunnel,
and we can run IPv4 over IPv4,

10
00:00:43,544 --> 00:00:46,036
IPv6 over IPv4.

11
00:00:46,036 --> 00:00:48,447
That's, of course, the one
we're going to be looking at,

12
00:00:48,447 --> 00:00:55,044
is a way to get IPv6 transported
through an IPv4-only network

13
00:00:55,044 --> 00:00:57,378
inside of a GRE tunnel.

14
00:00:57,378 --> 00:01:01,782
Very simple, very straightforward.
That will actually probably be

15
00:01:01,782 --> 00:01:03,789
a very, very short lesson.

16
00:01:05,119 --> 00:01:08,158
Then we have IPv6 IP tunnels.

17
00:01:08,158 --> 00:01:12,204
This is a very, very
short, again, transition.

18
00:01:12,204 --> 00:01:18,245
I'll probably do these two in one
lesson actually, GRE and IPv6 IP,

19
00:01:18,245 --> 00:01:22,714
just the generic IPv6 IP tunnels.

20
00:01:23,110 --> 00:01:30,787
And then from there we're going to
move into some of the other IPv6.

21
00:01:30,787 --> 00:01:37,266
And understand, IPv6 IP also
includes 6 to 4 tunnels.

22
00:01:38,733 --> 00:01:42,100
That is a type of IPv6 IP tunnel.

23
00:01:42,100 --> 00:01:47,695
So now we're starting to get into some
specifics under IPv6 IP tunnel types.

24
00:01:47,946 --> 00:01:51,502
As we're going down here, basically
what we're saying is, Okay,

25
00:01:51,502 --> 00:01:55,184
you've got GRE, which means you're
going to have the IPv4 header,

26
00:01:55,184 --> 00:02:01,008
followed by a GRE header, followed
by an IPv6 header on the inside.

27
00:02:01,353 --> 00:02:06,923
And because we have a GRE header, the
GRE header has a type field in it.

28
00:02:06,923 --> 00:02:11,356
That allows us to run IPv4 and IPv6.

29
00:02:11,356 --> 00:02:16,460
And, I guess, if you still cared,
IPX/SPX, or DECnet or something over

30
00:02:16,460 --> 00:02:19,793
that same tunnel, if your code
even still support that stuff.

31
00:02:19,910 --> 00:02:25,968
But the point is, we can run multiple
protocols over the same tunnel.

32
00:02:26,144 --> 00:02:32,562
When you go to IPv6 IP tunnel, you are
simply eliminating the GRE header.

33
00:02:32,714 --> 00:02:35,983
And just in the interest of looking
at MTU and all that kind of

34
00:02:35,983 --> 00:02:38,581
stuff, I think we will
still separate those out.

35
00:02:38,715 --> 00:02:43,584
But, the point is, all we're really
doing is eliminating the GRE header

36
00:02:43,584 --> 00:02:45,520
by saying, You know what?

37
00:02:45,520 --> 00:02:49,502
The only thing I'm going to
run over this tunnel is IPv6.

38
00:02:49,664 --> 00:02:53,764
So why do I need another header
to tell me what the next protocol

39
00:02:53,764 --> 00:02:59,634
is if I just tell both sides,
Hey, the next protocol,

40
00:02:59,634 --> 00:03:02,937
the Layer 3 protocol here is IPv6.

41
00:03:03,085 --> 00:03:05,975
I don't need GRE to tell me it's IPv6,

42
00:03:05,975 --> 00:03:10,411
I'm going to program you
to know that it's IPv6.

43
00:03:11,180 --> 00:03:16,918
Now, the problem with GRE
and IPv6 IP by itself,

44
00:03:16,918 --> 00:03:21,603
is those are both static
point-to-point tunnels.

45
00:03:21,967 --> 00:03:30,844
That's great, right up until you have
200 remote sites, 400, 1000, whatever.

46
00:03:30,844 --> 00:03:38,572
It gets quite a bit tedious if
you have too many remote sites.

47
00:03:38,572 --> 00:03:41,780
So as we move into 6 to 4, the idea was,

48
00:03:41,780 --> 00:03:45,412
well, here's a way to
dynamically build the tunnels.

49
00:03:45,616 --> 00:03:49,758
So these are going to be
dynamic multipoint tunnels.

50
00:03:50,829 --> 00:03:54,556
And then you also have ISATAP,
which is the same thing -

51
00:03:54,556 --> 00:03:56,637
dynamic multipoint tunnels.

52
00:03:56,637 --> 00:03:58,795
Little easier to configure.

53
00:03:59,766 --> 00:04:03,902
I don't know, I like to refer to
them as the progression from 6 to 4.

54
00:04:03,902 --> 00:04:06,103
I'm not sure if that's
technically accurate or not,

55
00:04:06,103 --> 00:04:10,471
but they're certainly easier to
configure, that's for certain.

56
00:04:10,660 --> 00:04:14,913
And then we'll get into MPLS.

57
00:04:15,067 --> 00:04:20,043
Now, MPLS is just another
way of transporting

58
00:04:20,055 --> 00:04:23,959
packets without doing
IP forwarding.

59
00:04:24,202 --> 00:04:29,489
So, this is again going to be an
IPv4 core with IPv6 running over

60
00:04:29,489 --> 00:04:33,732
top of it, and we'll look at that
from two different perspectives.

61
00:04:33,732 --> 00:04:39,380
We'll look at it from 6 PE, which
would be more of an enterprise-type

62
00:04:39,380 --> 00:04:45,881
solution, and then we'll look at
it from a 6 VPE, which could also

63
00:04:45,881 --> 00:04:48,576
be enterprise, it depends on how
you're running your network,

64
00:04:48,576 --> 00:04:53,383
but definitely what the service
provider would be doing.

65
00:04:53,857 --> 00:04:57,593
The service provider's not going
to do 6 PE, because that does not

66
00:04:57,593 --> 00:04:59,154
support multiple customer.

67
00:04:59,154 --> 00:05:03,002
That would just be, like I said, one
enterprise doing this in your core.

68
00:05:03,296 --> 00:05:09,771
So that's another way to get 6
through another protocol, like IPv4.

69
00:05:09,771 --> 00:05:14,436
In this case, instead of using
GRE and tunnel encapsulation,

70
00:05:14,436 --> 00:05:17,678
using MPLS for our transport.

71
00:05:17,887 --> 00:05:24,684
And last but not least, we will look at GRE
multipoint, which is, of course, DMVPN.

72
00:05:25,026 --> 00:05:29,588
So we'll be taking a look at each
one of these types of tunnels

73
00:05:29,588 --> 00:05:32,595
one at a time as we go through.

74
00:05:32,595 --> 00:05:36,990
[music]

