1
00:00:02,586 --> 00:00:05,503
(futuristic music)

2
00:00:09,074 --> 00:00:10,000
- So here we're gonna talk

3
00:00:10,000 --> 00:00:13,840
about something called the IPv6
Neighbor Discovery process,

4
00:00:13,840 --> 00:00:17,394
which is actually a combination
of several IPv6 packets

5
00:00:17,394 --> 00:00:20,921
working together to perform special roles.

6
00:00:20,921 --> 00:00:25,461
In the previous video, I
talked about five special

7
00:00:25,461 --> 00:00:28,543
or distinguishable
types of IPv6 addresses.

8
00:00:28,543 --> 00:00:30,558
We talked about link-local.

9
00:00:30,558 --> 00:00:32,909
We talked about multicast,
and a couple of others,

10
00:00:32,909 --> 00:00:34,970
and I mentioned that there
was one more special one

11
00:00:34,970 --> 00:00:36,195
that I want to get to,

12
00:00:36,195 --> 00:00:38,378
but in order to understand that last one,

13
00:00:38,378 --> 00:00:40,850
we have to understand this first.

14
00:00:40,850 --> 00:00:42,264
And then once I go through this,

15
00:00:42,264 --> 00:00:45,778
then my last video on sort
of IPv6 general theory

16
00:00:45,778 --> 00:00:47,796
will be on that final, special address

17
00:00:47,796 --> 00:00:49,452
I've been holding back.

18
00:00:49,452 --> 00:00:53,532
So lets talked about
IPv6 Neighbor Discovery.

19
00:00:53,532 --> 00:00:57,699
We've talked, as far as layer
four protocols are concerned,

20
00:00:58,984 --> 00:01:01,307
we've really focused
pretty much exclusively

21
00:01:01,307 --> 00:01:05,474
on TCP and UDP, but I have
hinted in some previous slides

22
00:01:06,357 --> 00:01:09,315
that there were others, as well.

23
00:01:09,315 --> 00:01:12,675
Well, one of them that you
definitely need to be aware of,

24
00:01:12,675 --> 00:01:17,154
that's a layer four and
above protocol, is ICMP,

25
00:01:17,154 --> 00:01:21,746
the internet control
messaging protocol, ICMP,

26
00:01:21,746 --> 00:01:24,033
internet control messaging protocol.

27
00:01:24,033 --> 00:01:26,700
So the most common usage of ICMP

28
00:01:28,109 --> 00:01:31,761
is when people issue the ping command.

29
00:01:31,761 --> 00:01:34,805
For example, and you can do this

30
00:01:34,805 --> 00:01:36,259
on your own laptop, as well.

31
00:01:36,259 --> 00:01:38,946
If I open up my command prompt,

32
00:01:38,946 --> 00:01:40,529
bring it over here.

33
00:01:42,347 --> 00:01:43,859
And a lot of times, if
you wanna figure out

34
00:01:43,859 --> 00:01:45,841
if you have network
connectivity to something,

35
00:01:45,841 --> 00:01:49,591
for example, I know that
Google's DNS server,

36
00:01:51,073 --> 00:01:53,931
a server that Google owns
that can resolve websites

37
00:01:53,931 --> 00:01:56,264
to IP addresses, is 8.8.8.8.

38
00:01:58,451 --> 00:01:59,865
That's very common knowledge.

39
00:01:59,865 --> 00:02:01,971
It's public knowledge.

40
00:02:01,971 --> 00:02:04,243
And so if I wanna see if I
can actually have connectivity

41
00:02:04,243 --> 00:02:08,940
to that, I can type ping and
then type in that IP address

42
00:02:08,940 --> 00:02:10,107
and hit enter.

43
00:02:12,152 --> 00:02:15,919
So clearly, now I'm getting a reply.

44
00:02:15,919 --> 00:02:18,011
So what was just happening right there?

45
00:02:18,011 --> 00:02:22,105
So when you type ping, what's
actually happening is the CPU

46
00:02:22,105 --> 00:02:24,460
of your device, of my laptop in this case,

47
00:02:24,460 --> 00:02:26,793
is creating an ICMP message,

48
00:02:27,812 --> 00:02:31,049
and ICMP has several
different kinds of messages,

49
00:02:31,049 --> 00:02:34,151
depending on what the objective is.

50
00:02:34,151 --> 00:02:36,619
So in this particular case,
my laptap was creating

51
00:02:36,619 --> 00:02:40,786
what was called an ICMP
echo request, echo request.

52
00:02:42,220 --> 00:02:46,332
Basically, it sending out
an echo request to 8.8.8.8,

53
00:02:46,332 --> 00:02:49,883
and if that server is also running ICMP,

54
00:02:49,883 --> 00:02:52,710
which most devices do by default,

55
00:02:52,710 --> 00:02:53,989
it will turn around and send back

56
00:02:53,989 --> 00:02:57,239
to me what's called an ICMP echo reply,

57
00:02:58,469 --> 00:02:59,715
and that's what we see right here.

58
00:02:59,715 --> 00:03:02,225
We see that the first one
timed out for some reason,

59
00:03:02,225 --> 00:03:04,832
but then I got three echo replies.

60
00:03:04,832 --> 00:03:07,211
So this was an echo
request going out from me.

61
00:03:07,211 --> 00:03:09,932
I actually send four echo requests,

62
00:03:09,932 --> 00:03:13,843
and I got a response
back from three of them.

63
00:03:13,843 --> 00:03:17,430
So that was just an
example of ICMP in action.

64
00:03:17,430 --> 00:03:20,309
Now, there are other
ICMP messages, as well.

65
00:03:20,309 --> 00:03:23,631
I don't have time to get into
all of them in this course,

66
00:03:23,631 --> 00:03:25,476
but I would definitely
recommend that you Google

67
00:03:25,476 --> 00:03:28,516
the term ICMP and just
be familiar with the,

68
00:03:28,516 --> 00:03:30,229
there's about maybe five,

69
00:03:30,229 --> 00:03:32,177
four or five different ICMP messages,

70
00:03:32,177 --> 00:03:34,698
and I've just talked about the top two,

71
00:03:34,698 --> 00:03:37,075
echo request, echo reply.

72
00:03:37,075 --> 00:03:39,851
What does that have to do with this?

73
00:03:39,851 --> 00:03:41,810
Well, just like I mentioned
a couple slides back

74
00:03:41,810 --> 00:03:45,977
or a couple videos back, that
DHCP had been upgraded for v6,

75
00:03:47,124 --> 00:03:49,643
that there's a DHCPv6.

76
00:03:49,643 --> 00:03:51,643
Well, there's an ICMPv6.

77
00:03:52,770 --> 00:03:54,977
Now, this is kind of interesting
when you think about it

78
00:03:54,977 --> 00:03:58,865
because ICMP, because it's layer four,

79
00:03:58,865 --> 00:04:01,537
rides behind an IP header.

80
00:04:01,537 --> 00:04:04,310
So in other words, you've
got your IP header here,

81
00:04:04,310 --> 00:04:09,232
and then ICMP is like in the
payload of the IP packet.

82
00:04:09,232 --> 00:04:13,399
So one would wonder why did
they have to update ICMP?

83
00:04:14,643 --> 00:04:17,425
Well, for one thing, if
they had not updated it,

84
00:04:17,425 --> 00:04:20,858
there'd be no way to ping an IPv6 address

85
00:04:20,858 --> 00:04:24,177
because within the body
of the ICMP message,

86
00:04:24,177 --> 00:04:25,851
it says who am I trying to talk to?

87
00:04:25,851 --> 00:04:27,977
So not only is the
destination in the header

88
00:04:27,977 --> 00:04:29,772
of the IP packet itself,

89
00:04:29,772 --> 00:04:31,057
but the destination you're trying to ping

90
00:04:31,057 --> 00:04:33,623
is also in the body of the ICP message,

91
00:04:33,623 --> 00:04:35,793
saying I'm trying to do
an echo request to you.

92
00:04:35,793 --> 00:04:37,217
Can you please respond back?

93
00:04:37,217 --> 00:04:38,697
It's in the body of the packet.

94
00:04:38,697 --> 00:04:41,270
So they had to upgrade ICMP, as well,

95
00:04:41,270 --> 00:04:45,636
in order to be able to
handle IPv6 addresses.

96
00:04:45,636 --> 00:04:48,411
In addition to doing that,
when they updated ICMP,

97
00:04:48,411 --> 00:04:52,412
they actually added some
new ICMP message types

98
00:04:52,412 --> 00:04:53,750
that did not exist before.

99
00:04:53,750 --> 00:04:56,163
So in addition to echo
request and echo reply,

100
00:04:56,163 --> 00:04:57,670
which still exist,

101
00:04:57,670 --> 00:05:01,837
they also created four new
types of ICMPv6 messages,

102
00:05:03,232 --> 00:05:06,149
which are only applicable for IPv6,

103
00:05:07,552 --> 00:05:12,065
and those are Neighbor Solicitation,
Neighbor Advertisement,

104
00:05:12,065 --> 00:05:15,945
Router Solicitation, and
Router Advertisement.

105
00:05:15,945 --> 00:05:20,112
All four of those are in the
body of an ICMPv6 packet.

106
00:05:21,771 --> 00:05:25,383
In the header of the ICMPv6
packet, in the header,

107
00:05:25,383 --> 00:05:28,177
there's a little type code,
and the type code indicates

108
00:05:28,177 --> 00:05:30,283
what kind of ICMP message is this.

109
00:05:30,283 --> 00:05:31,623
Is this an echo request?

110
00:05:31,623 --> 00:05:33,109
Is it an echo reply?

111
00:05:33,109 --> 00:05:37,243
Or there are other type codes
for these things right here.

112
00:05:37,243 --> 00:05:41,745
So these specific ICMPv6
message types together,

113
00:05:41,745 --> 00:05:45,297
we call them the Neighbor
Discovery Protocol.

114
00:05:45,297 --> 00:05:47,829
So if you hear that term,
which you most likely will,

115
00:05:47,829 --> 00:05:49,937
the IPv6 Neighbor Discovery Protocol,

116
00:05:49,937 --> 00:05:52,404
that should key off in
your head, oh, okay,

117
00:05:52,404 --> 00:05:54,937
they're talking about how we
use these four different kinds

118
00:05:54,937 --> 00:05:56,520
of ICMPv6 messages.

119
00:05:57,603 --> 00:06:01,580
So lets talk about how this process works.

120
00:06:01,580 --> 00:06:03,499
And what I'm gonna
specifically gonna refer to

121
00:06:03,499 --> 00:06:06,771
is back when I was talking
about IPv6 addresses,

122
00:06:06,771 --> 00:06:10,311
and I was first introducing
the concept of an IPv6 address,

123
00:06:10,311 --> 00:06:11,938
I said that a device could have

124
00:06:11,938 --> 00:06:14,997
a statically configured IPv6 address.

125
00:06:14,997 --> 00:06:19,865
I said it could learn about
it from a DHCPv6 server

126
00:06:19,865 --> 00:06:22,691
or there was something special in IPv6

127
00:06:22,691 --> 00:06:25,973
called stateless address
automatic configuration,

128
00:06:25,973 --> 00:06:27,640
or SLAAC, S-L-A-A-C,

129
00:06:29,473 --> 00:06:32,833
and this, these messages
that we see right here

130
00:06:32,833 --> 00:06:37,000
are how our stateless address
automatic configuration works.

131
00:06:39,321 --> 00:06:40,555
Let's whiteboard that process,

132
00:06:40,555 --> 00:06:43,138
so you can see what's going on.

133
00:06:45,898 --> 00:06:48,898
Okay, so lets start with our laptop.

134
00:06:54,623 --> 00:06:58,790
And the laptop has a network
interface card, a NIC.

135
00:07:02,623 --> 00:07:06,790
And then all of a sudden,
it's connected to a cable.

136
00:07:08,563 --> 00:07:10,552
And there's something at the
other end of this cable here.

137
00:07:10,552 --> 00:07:11,878
I'm not gonna tell you what it is,

138
00:07:11,878 --> 00:07:15,065
but whatever it is, it's
generating electrical signal

139
00:07:15,065 --> 00:07:18,125
so the NIC card on this
PC says, aha, okay,

140
00:07:18,125 --> 00:07:20,164
I've been connected to a network.

141
00:07:20,164 --> 00:07:22,231
I know I'm connected to a network.

142
00:07:22,231 --> 00:07:25,481
Now, this NIC card is enabled for IPv6.

143
00:07:27,663 --> 00:07:29,311
That's one of the protocols that's on it.

144
00:07:29,311 --> 00:07:31,919
As a matter of fact, all
Windows devices these days

145
00:07:31,919 --> 00:07:33,833
have IPV6 enabled on their NIC cards.

146
00:07:33,833 --> 00:07:35,354
You probably didn't even know it,

147
00:07:35,354 --> 00:07:38,051
but you're running IPv6.

148
00:07:38,051 --> 00:07:40,966
Now we know that a NIC
card, because it's connected

149
00:07:40,966 --> 00:07:42,883
to an ethernet segment,

150
00:07:44,894 --> 00:07:48,644
has a burned in address
called a MAC address.

151
00:07:50,805 --> 00:07:53,374
So let's put my MAC address on here.

152
00:07:53,374 --> 00:07:54,624
0002.1111.2222.

153
00:07:59,765 --> 00:08:03,834
Alright, so that's the MAC
address of this NIC card.

154
00:08:03,834 --> 00:08:05,807
So very first thing
this NIC card has to do,

155
00:08:05,807 --> 00:08:07,967
once it enables itself for IPv6,

156
00:08:07,967 --> 00:08:11,204
is it has to create a
link-local address for itself.

157
00:08:11,204 --> 00:08:12,863
Do you remember, review question,

158
00:08:12,863 --> 00:08:16,946
how do we recognize
link-local addresses in IPv6?

159
00:08:19,743 --> 00:08:21,378
Well, hopefully you said,
ah, those are the addresses

160
00:08:21,378 --> 00:08:23,545
that begin with fe80.

161
00:08:23,545 --> 00:08:24,911
You're absolutely right.

162
00:08:24,911 --> 00:08:27,652
So we'll begin with fe80,
but before I add that,

163
00:08:27,652 --> 00:08:31,819
we have to convert this
into an EUI-64 interface ID.

164
00:08:33,365 --> 00:08:34,333
I'm not gonna explain it.

165
00:08:34,333 --> 00:08:36,079
We already did that in a previous video,

166
00:08:36,079 --> 00:08:40,451
so all I'll say is that
my link-local address

167
00:08:40,451 --> 00:08:44,118
will end up being
fe80::0202:11ff:fe11:2222.

168
00:08:54,954 --> 00:08:58,371
So that's gonna be my link-local address.

169
00:08:59,441 --> 00:09:01,059
Starts out with fe80,

170
00:09:01,059 --> 00:09:04,488
and then we use the EUI-64
format to convert this

171
00:09:04,488 --> 00:09:06,853
into an interface ID.

172
00:09:06,853 --> 00:09:09,939
Now, one thing I wanna make
you aware of right now.

173
00:09:09,939 --> 00:09:13,755
Several years back,
there were some engineers

174
00:09:13,755 --> 00:09:16,551
from various different
disciplines and companies

175
00:09:16,551 --> 00:09:20,437
who decided that creating an interface ID

176
00:09:20,437 --> 00:09:24,270
out of a MAC address
might be kind of insecure

177
00:09:25,652 --> 00:09:27,473
because they said, hey,
if somebody was monitoring

178
00:09:27,473 --> 00:09:29,371
your traffic and they always saw

179
00:09:29,371 --> 00:09:31,103
the exact same interface ID,

180
00:09:31,103 --> 00:09:32,408
they could track where you were.

181
00:09:32,408 --> 00:09:34,389
They could say, oh, we
can see this guy moved

182
00:09:34,389 --> 00:09:35,815
around through the
building throughout the day

183
00:09:35,815 --> 00:09:37,709
because we can see this link-local,

184
00:09:37,709 --> 00:09:40,095
we can see this interface ID,

185
00:09:40,095 --> 00:09:42,895
this same interface ID moving around.

186
00:09:42,895 --> 00:09:46,375
So because, just like IP version 4 right?

187
00:09:46,375 --> 00:09:48,389
When you move from one
subnet to the other,

188
00:09:48,389 --> 00:09:51,015
you get a new address via DHCP.

189
00:09:51,015 --> 00:09:52,831
Well, same thing is true with IPv6.

190
00:09:52,831 --> 00:09:54,783
If I'm sitting in Payroll right now,

191
00:09:54,783 --> 00:09:57,524
I'll have some sort of IPv6 network

192
00:09:57,524 --> 00:10:01,183
that belongs to Payroll,
but my interface ID

193
00:10:01,183 --> 00:10:03,855
will still be based off of my MAC address

194
00:10:03,855 --> 00:10:05,522
if I'm using EUI-64.

195
00:10:06,437 --> 00:10:08,255
Now if I pick up my laptop and I go over

196
00:10:08,255 --> 00:10:12,513
to the Marketing Department,
well, now my IPv6 prefix

197
00:10:12,513 --> 00:10:15,173
has changed because I did DHCP,

198
00:10:15,173 --> 00:10:16,921
and now I'm sitting in their subnet,

199
00:10:16,921 --> 00:10:20,735
but my interface ID has not changed.

200
00:10:20,735 --> 00:10:23,760
If it's using EUI-64, it is still the same

201
00:10:23,760 --> 00:10:27,021
'cause my MAC address goes
with me wherever I go.

202
00:10:27,021 --> 00:10:28,819
So some people said, huh,

203
00:10:28,819 --> 00:10:30,393
well, that means if somebody has

204
00:10:30,393 --> 00:10:32,655
some network monitoring equipment set up

205
00:10:32,655 --> 00:10:34,223
like in a building or something,

206
00:10:34,223 --> 00:10:35,927
watching all the packets everywhere,

207
00:10:35,927 --> 00:10:38,549
they could say, oh, interesting.

208
00:10:38,549 --> 00:10:41,549
We see the interface ID here of Joe.

209
00:10:42,996 --> 00:10:45,103
It's his MAC address,
and we see it traveling

210
00:10:45,103 --> 00:10:46,351
throughout the building.

211
00:10:46,351 --> 00:10:49,555
Even though the prefix
is changing, we can track

212
00:10:49,555 --> 00:10:53,823
where Joe is going because we
can see that same interface ID

213
00:10:53,823 --> 00:10:57,522
never changing as it moves
around through the network.

214
00:10:57,522 --> 00:10:59,609
So these engineers came
up with a different,

215
00:10:59,609 --> 00:11:01,281
I don't know what the RFC is.

216
00:11:01,281 --> 00:11:03,151
It's not off the top off my head,

217
00:11:03,151 --> 00:11:05,029
but there's an RFC that's
been out for a while now

218
00:11:05,029 --> 00:11:08,995
that says basically, when a
device dynamically comes up

219
00:11:08,995 --> 00:11:11,361
with an interface ID, it should just be

220
00:11:11,361 --> 00:11:13,263
some like random number,

221
00:11:13,263 --> 00:11:15,304
and it should change it
every once in a while.

222
00:11:15,304 --> 00:11:17,489
Like every hour or so,
it should change it,

223
00:11:17,489 --> 00:11:18,969
so that it can't be tracked.

224
00:11:18,969 --> 00:11:21,009
So the reason I'm saying that to you

225
00:11:21,009 --> 00:11:25,249
is because if you look at the
IPv6 address on your laptop,

226
00:11:25,249 --> 00:11:29,056
chances are your interface
ID will probably not be

227
00:11:29,056 --> 00:11:31,017
the EUI-64 format.

228
00:11:31,017 --> 00:11:33,583
It probably will not be
related to your MAC address.

229
00:11:33,583 --> 00:11:35,311
It's probably running this newer standard

230
00:11:35,311 --> 00:11:37,943
that says it needs to
be some random number

231
00:11:37,943 --> 00:11:39,784
that changes over time.

232
00:11:39,784 --> 00:11:41,169
But you do need to know

233
00:11:41,169 --> 00:11:44,612
how EUI-64 interface IDs are created,

234
00:11:44,612 --> 00:11:47,407
especially on Cisco devices

235
00:11:47,407 --> 00:11:50,192
because it's a keyword that
you can use on a Cisco device,

236
00:11:50,192 --> 00:11:51,746
and every single Cisco device,

237
00:11:51,746 --> 00:11:54,719
when it creates a link-local
address for itself,

238
00:11:54,719 --> 00:11:58,319
it's always based off
of the EUI-64 format.

239
00:11:58,319 --> 00:12:00,245
Cisco routers and switches,

240
00:12:00,245 --> 00:12:03,319
they don't use this
randomized interface ID thing

241
00:12:03,319 --> 00:12:05,925
that Microsoft Windows and other hosts do.

242
00:12:05,925 --> 00:12:07,842
They always use EUI-64.

243
00:12:09,039 --> 00:12:11,353
So enough said about that.

244
00:12:11,353 --> 00:12:13,720
This device right here
creates a link-local address

245
00:12:13,720 --> 00:12:17,479
for itself, and it says,
alright, first thing I need to do

246
00:12:17,479 --> 00:12:20,015
is I need to make sure
that on this segment

247
00:12:20,015 --> 00:12:22,431
there's nobody else that's using

248
00:12:22,431 --> 00:12:24,207
this exact same link-local address.

249
00:12:24,207 --> 00:12:26,893
I have to make sure that
there are no duplicates,

250
00:12:26,893 --> 00:12:28,560
that this is unique.

251
00:12:29,439 --> 00:12:32,733
So he'll send out his very first type

252
00:12:32,733 --> 00:12:35,951
of Neighbor Discovery Packet,

253
00:12:35,951 --> 00:12:37,534
which is an ICMPv6.

254
00:12:39,993 --> 00:12:42,743
We call it Neighbor Solicitation,

255
00:12:45,778 --> 00:12:48,945
and the source will be his link-local,

256
00:12:50,479 --> 00:12:52,146
and the destination,

257
00:12:54,079 --> 00:12:56,132
the destination will be something called

258
00:12:56,132 --> 00:12:59,049
a solicited node multicast address.

259
00:12:59,937 --> 00:13:02,013
Now, that is that special type of address

260
00:13:02,013 --> 00:13:03,605
I have not talked to you about.

261
00:13:03,605 --> 00:13:06,545
I said there was one remaining
address that was unique,

262
00:13:06,545 --> 00:13:07,834
that we hadn't talked about.

263
00:13:07,834 --> 00:13:11,137
That's it, and in the next
video, I'll talk about this.

264
00:13:11,137 --> 00:13:12,999
But I want to start out by explaining

265
00:13:12,999 --> 00:13:16,066
where this special address is used,

266
00:13:16,066 --> 00:13:19,566
and then we can look at how is it created.

267
00:13:20,815 --> 00:13:24,430
Now, if anybody did have
this link-local address here,

268
00:13:24,430 --> 00:13:25,869
what I will tell you

269
00:13:25,869 --> 00:13:28,081
is that the solicited
node multicast address

270
00:13:28,081 --> 00:13:30,581
is actually derived from this.

271
00:13:31,761 --> 00:13:33,321
It's derived from that,

272
00:13:33,321 --> 00:13:35,656
so that if somebody on
this wire actually did have

273
00:13:35,656 --> 00:13:37,609
this exact same link-local address,

274
00:13:37,609 --> 00:13:40,401
which is highly unlikely,

275
00:13:40,401 --> 00:13:43,183
then they would actually
listen to this packet,

276
00:13:43,183 --> 00:13:45,668
and they would respond back.

277
00:13:45,668 --> 00:13:47,835
So hopefully, nobody does,

278
00:13:49,188 --> 00:13:51,747
and so he says, okay.

279
00:13:51,747 --> 00:13:54,707
Now if somebody did respond back,

280
00:13:54,707 --> 00:13:56,457
I'm gonna erase this,

281
00:13:57,423 --> 00:14:01,590
somebody would respond back
with a Neighbor Advertisement.

282
00:14:07,984 --> 00:14:10,677
So that's another part of the
Neighbor Discovery Process,

283
00:14:10,677 --> 00:14:13,423
Neighbor Solicitation and
Neighbor Advertisement.

284
00:14:13,423 --> 00:14:15,805
But in this particular
case, we don't wanna see

285
00:14:15,805 --> 00:14:17,284
a Neighbor Advertisement come back

286
00:14:17,284 --> 00:14:21,329
because that would mean uh-oh,
somebody's got our address.

287
00:14:21,329 --> 00:14:23,297
So this process right now

288
00:14:23,297 --> 00:14:26,591
of where we're basically
sending out a packet saying,

289
00:14:26,591 --> 00:14:29,031
hey, is anybody using my address?

290
00:14:29,031 --> 00:14:33,199
It actually goes by a name that
you should be familiar with.

291
00:14:33,199 --> 00:14:36,532
It's called Duplicate Address Detection,

292
00:14:39,450 --> 00:14:41,515
Duplicate Address Detection.

293
00:14:41,515 --> 00:14:46,025
So whenever an IPv6 node
either dynamically comes up

294
00:14:46,025 --> 00:14:48,315
with an address for itself

295
00:14:48,315 --> 00:14:50,697
or you statically configure one on there,

296
00:14:50,697 --> 00:14:52,377
it always does this.

297
00:14:52,377 --> 00:14:54,715
It sends out a Neighbor
Solicitation packet,

298
00:14:54,715 --> 00:14:56,217
basically for itself, saying,

299
00:14:56,217 --> 00:14:59,250
hey, is anybody out there using this?

300
00:14:59,250 --> 00:15:03,261
Most of the time, probably
99.99% of the time,

301
00:15:03,261 --> 00:15:04,883
nothing should come back.

302
00:15:04,883 --> 00:15:06,255
So you have completed

303
00:15:06,255 --> 00:15:10,243
the Duplicate Address Detection process.

304
00:15:10,243 --> 00:15:13,923
Okay, now, this PC says, okay, great,

305
00:15:13,923 --> 00:15:16,621
I've got a link-local address.

306
00:15:16,621 --> 00:15:20,011
So the next thing it says is
I need to get a global prefix.

307
00:15:20,011 --> 00:15:23,677
If I'm ever gonna get off this
link and send IPv6 packets

308
00:15:23,677 --> 00:15:27,063
to other departments or even the internet,

309
00:15:27,063 --> 00:15:29,355
I need a global address to do that.

310
00:15:29,355 --> 00:15:32,857
And he says, well, I've
been configured for SLAAC,

311
00:15:32,857 --> 00:15:36,457
for stateless address
automatic configuration.

312
00:15:36,457 --> 00:15:39,374
So what he does is now he sends out

313
00:15:40,974 --> 00:15:44,057
another type of ICMP message, ICMPv6,

314
00:15:46,987 --> 00:15:50,154
which is called a Router Solicitation,

315
00:15:51,629 --> 00:15:53,462
Solicit, Solicitation.

316
00:15:55,889 --> 00:16:00,729
And once again, the source
is gonna be his link-local,

317
00:16:00,729 --> 00:16:04,062
and the destination is gonna be FF02::2.

318
00:16:09,043 --> 00:16:12,193
Now, FF, you should be
able to recognize that.

319
00:16:12,193 --> 00:16:14,090
That's one of those patterns
I said you should recognize.

320
00:16:14,090 --> 00:16:16,423
That is a multicast address,

321
00:16:17,359 --> 00:16:20,146
and this multicast address
has special meaning.

322
00:16:20,146 --> 00:16:23,979
This is called the All
IPv6 Routers multicast,

323
00:16:25,321 --> 00:16:29,359
so any router that's
enabled to IPv6 is listening

324
00:16:29,359 --> 00:16:32,192
for packets going to this address.

325
00:16:33,051 --> 00:16:34,729
So let' say there is a router.

326
00:16:34,729 --> 00:16:36,979
Hopefully there is one.

327
00:16:36,979 --> 00:16:39,181
Let's put him right here,

328
00:16:39,181 --> 00:16:41,193
and let's say that on
that router's interface,

329
00:16:41,193 --> 00:16:44,943
I have configured the
following IPv6 address.

330
00:16:50,699 --> 00:16:51,747
Okay?

331
00:16:51,747 --> 00:16:54,010
So looking at that, remember,

332
00:16:54,010 --> 00:16:58,177
how much of this IPv6 address
is the prefix, the network?

333
00:16:59,490 --> 00:17:00,842
The first 64 bits.

334
00:17:00,842 --> 00:17:02,690
That's what this subnet
mask is telling us,

335
00:17:02,690 --> 00:17:04,968
which is all of this right there.

336
00:17:04,968 --> 00:17:07,070
That's the prefix.

337
00:17:07,070 --> 00:17:08,461
So when this router receives

338
00:17:08,461 --> 00:17:11,211
this Router Solicitation message,

339
00:17:13,364 --> 00:17:18,289
he responds back with, you
can probably guess what it is.

340
00:17:18,289 --> 00:17:20,206
A Router-Advertisement.

341
00:17:27,357 --> 00:17:30,190
And he sends it back to that node.

342
00:17:31,189 --> 00:17:34,022
I'm trying to make some room here.

343
00:17:35,014 --> 00:17:38,681
Destination= fe80::0202:11ff:fe11:2222.

344
00:17:46,007 --> 00:17:48,974
So it's going back to that host.

345
00:17:48,974 --> 00:17:52,891
And the source is, see
if I can fit it in here,

346
00:17:55,156 --> 00:17:57,739
the router's link-local address

347
00:18:00,523 --> 00:18:03,273
because this router also has one.

348
00:18:09,877 --> 00:18:11,796
So whatever his link-local address is,

349
00:18:11,796 --> 00:18:14,604
that is what the source of this will be.

350
00:18:14,604 --> 00:18:16,101
And here's the great thing.

351
00:18:16,101 --> 00:18:20,564
Inside this Router-Advertisement,
in the body of it,

352
00:18:20,564 --> 00:18:24,775
he says, hey, let me tell
you what prefixes I have

353
00:18:24,775 --> 00:18:26,275
on this interface.

354
00:18:30,964 --> 00:18:34,649
Now that the host sees that,
that Router-Advertisement,

355
00:18:34,649 --> 00:18:36,638
he says, oh, very cool.

356
00:18:36,638 --> 00:18:39,684
I know what the global prefix
is that lives on this wire,

357
00:18:39,684 --> 00:18:42,603
so I can use stateless address
automatic configuration

358
00:18:42,603 --> 00:18:46,389
to come up with my own global address.

359
00:18:46,389 --> 00:18:48,577
I'll just use that 'cause after all,

360
00:18:48,577 --> 00:18:49,789
that's what the router's using,

361
00:18:49,789 --> 00:18:53,298
and I gotta be on the
same thing as the router,

362
00:18:53,298 --> 00:18:56,798
and then, I will use the same interface ID

363
00:18:58,637 --> 00:19:00,009
that I got in my link-local.

364
00:19:00,009 --> 00:19:03,336
I'll just do the EUI-64 process again,

365
00:19:03,336 --> 00:19:06,503
which will end up with the same thing.

366
00:19:10,089 --> 00:19:12,021
And then, once he has this,

367
00:19:12,021 --> 00:19:15,210
he will do Duplicate
Address Detection on this.

368
00:19:15,210 --> 00:19:18,341
He'll send out a Neighbor
Solicitation message for this.

369
00:19:18,341 --> 00:19:20,215
Shouldn't hear anything back,

370
00:19:20,215 --> 00:19:23,132
and now he knows that it is unique.

371
00:19:24,131 --> 00:19:27,884
So this is how stateless
address automatic configuration

372
00:19:27,884 --> 00:19:31,003
works, or Address Autoconfig.

373
00:19:31,003 --> 00:19:32,924
Basically, you gotta come
up with a link-local address

374
00:19:32,924 --> 00:19:36,375
for yourself first, verify
that there's no duplicates

375
00:19:36,375 --> 00:19:38,363
by sending a Neighbor Solicitation message

376
00:19:38,363 --> 00:19:40,177
to yourself essentially.

377
00:19:40,177 --> 00:19:42,804
Then you send out a Router Solicitation

378
00:19:42,804 --> 00:19:45,804
to this reserved address of FF02::2.

379
00:19:47,069 --> 00:19:49,429
All routers are supposed
to listen to that.

380
00:19:49,429 --> 00:19:50,742
When the router hears it,

381
00:19:50,742 --> 00:19:53,444
he sends a Router-Advertisement back.

382
00:19:53,444 --> 00:19:56,262
He sends it to you,
your link-local address,

383
00:19:56,262 --> 00:19:58,338
and in the body of that message, he says,

384
00:19:58,338 --> 00:20:00,551
here's the global prefix
at everybody on this wire,

385
00:20:00,551 --> 00:20:04,371
here's the group that you're
a part of, the subnet,

386
00:20:04,371 --> 00:20:07,517
and now the PC can use that prefix,

387
00:20:07,517 --> 00:20:10,364
once again, create his own interface ID,

388
00:20:10,364 --> 00:20:13,416
and now he has a global
prefix that he can use

389
00:20:13,416 --> 00:20:16,869
to speak to the rest of the world.

390
00:20:16,869 --> 00:20:18,869
Now, there is one other,

391
00:20:19,724 --> 00:20:21,377
there's a couple of additional
things about this here

392
00:20:21,377 --> 00:20:23,377
that I wanna talk about.

393
00:20:24,339 --> 00:20:26,098
This address is special.

394
00:20:26,098 --> 00:20:28,977
Let me put a red circle around it.

395
00:20:28,977 --> 00:20:31,309
Definitely wanna memorize that.

396
00:20:31,309 --> 00:20:34,976
And every single IPv6
host is also listening

397
00:20:37,013 --> 00:20:40,516
to another special multicast address.

398
00:20:40,516 --> 00:20:43,933
I'll write that on the bottom, I suppose.

399
00:20:45,913 --> 00:20:47,746
That would be FF02::1.

400
00:20:50,246 --> 00:20:53,163
That is the All IPv6 Hosts Address,

401
00:20:56,142 --> 00:20:57,635
and the router's listening to that,

402
00:20:57,635 --> 00:21:00,885
so actually this router is listening to

403
00:21:03,661 --> 00:21:05,796
four addresses, right?

404
00:21:05,796 --> 00:21:07,994
The router's got his link-local.

405
00:21:07,994 --> 00:21:10,001
He's listening to anybody
who wants to talk to him

406
00:21:10,001 --> 00:21:11,773
on his global prefix.

407
00:21:11,773 --> 00:21:13,860
He's listening to anybody
who wants to send something

408
00:21:13,860 --> 00:21:16,893
to him specifically as
just a generic router,

409
00:21:16,893 --> 00:21:19,823
and he is considered a host.

410
00:21:19,823 --> 00:21:22,775
Any NIC card that has IPv6
on it is considered a host,

411
00:21:22,775 --> 00:21:26,314
so he's listening to
the All Hosts Address.

412
00:21:26,314 --> 00:21:29,314
So everybody at minimum, at minimum,

413
00:21:31,112 --> 00:21:34,945
devices are listening
to three IPv6 addresses,

414
00:21:36,793 --> 00:21:40,126
their link-local, the All Hosts Address,

415
00:21:41,211 --> 00:21:44,051
and the solicited node multicast address.

416
00:21:44,051 --> 00:21:46,491
Now, I know that I haven't
defined that one for you yet.

417
00:21:46,491 --> 00:21:48,830
That'll be in the next video.

418
00:21:48,830 --> 00:21:52,701
But every device has a solicited
node multicast address,

419
00:21:52,701 --> 00:21:56,235
and that's derived from
the link-local address,

420
00:21:56,235 --> 00:21:57,461
and they're also listening

421
00:21:57,461 --> 00:22:00,378
to the All Hosts multicast address.

422
00:22:01,451 --> 00:22:03,250
Now, whether or not they
have a global prefix,

423
00:22:03,250 --> 00:22:04,701
they may or they may not.

424
00:22:04,701 --> 00:22:07,098
I mean, if they wanna
get off of their subnet,

425
00:22:07,098 --> 00:22:11,616
they're gonna need one,
but it's not mandatory.

426
00:22:11,616 --> 00:22:14,123
And routers also listen to
this other special address

427
00:22:14,123 --> 00:22:17,494
of the All IPv6 router's address.

428
00:22:17,494 --> 00:22:20,411
(futuristic music)

