WEBVTT

0:00:05.200000 --> 0:00:08.220000
 So I want to finish up this
 series on Ethernet.

0:00:08.220000 --> 0:00:11.720000
 It's talking a little bit about Ethernet
 cabling and sort of demystifying

0:00:11.720000 --> 0:00:15.580000
 some of these terms like what's the
 difference between category 5 and

0:00:15.580000 --> 0:00:20.840000
 category 6 cables and what does it mean
 when I see 10 base T versus 100

0:00:20.840000 --> 0:00:23.740000
 base T4? What does all that mean?

0:00:23.740000 --> 0:00:28.400000
 So that's what we're going to do
 in this wrap up session here.

0:00:28.400000 --> 0:00:31.860000
 So as I mentioned previously, when
 Ethernet first came out in the late

0:00:31.860000 --> 0:00:35.700000
 1970s, it used a very
 thick coaxial cabling.

0:00:35.700000 --> 0:00:38.080000
 They actually called
 that thick net.

0:00:38.080000 --> 0:00:41.580000
 And they came up with, after that, a
 thinner type of coaxial cable that

0:00:41.580000 --> 0:00:44.600000
 was a little bit more flexible
 called thin net.

0:00:44.600000 --> 0:00:48.500000
 But we don't use that anymore
 as Ethernet evolved.

0:00:48.500000 --> 0:00:52.820000
 It continued to operate over copper
 cable of various different types as

0:00:52.820000 --> 0:00:56.320000
 well as fiber optic cable because by
 transmitting those ones and zeroes

0:00:56.320000 --> 0:01:00.240000
 as light pulses instead of electrical
 energy, you can actually transmit

0:01:00.240000 --> 0:01:05.080000
 it faster and get more data through that
 cable if it's a fiber optic cable.

0:01:05.080000 --> 0:01:08.800000
 So a lot of times you're going to see
 when referencing Ethernet, especially

0:01:08.800000 --> 0:01:13.620000
 like Ethernet cables, you're going to
 see stuff like 100 base Tx or 1000

0:01:13.620000 --> 0:01:16.500000
 base Zx or something like that.

0:01:16.500000 --> 0:01:17.640000
 What does that mean?

0:01:17.640000 --> 0:01:20.500000
 So let's break that
 down a little bit.

0:01:20.500000 --> 0:01:24.380000
 So first of all, when you see something
 like that, the first number represents

0:01:24.380000 --> 0:01:31.460000
 the speed. So 10 is 10 megabits per second,
 100, 100 megabits per second.

0:01:31.460000 --> 0:01:34.580000
 And in terms of Ethernet, the next thing
 is always going to be the word

0:01:34.580000 --> 0:01:40.740000
 base, 100 base, 1000 base because Ethernet
 is what's called a baseband

0:01:40.740000 --> 0:01:45.780000
 technology, which means that the transmitting
 device, the device that's

0:01:45.780000 --> 0:01:49.880000
 sending has full use of all
 the bandwidth of the cable.

0:01:49.880000 --> 0:01:53.300000
 You can't divide up and have two or
 three devices transmitting at the

0:01:53.300000 --> 0:01:56.440000
 same time and using different
 frequencies or something.

0:01:56.440000 --> 0:01:58.100000
 Ethernet doesn't support that.

0:01:58.100000 --> 0:02:02.680000
 So baseband means one device is speaking,
 it's using all of the electrical

0:02:02.680000 --> 0:02:04.140000
 energy on that cable.

0:02:04.140000 --> 0:02:06.480000
 It has the cable reserved.

0:02:06.480000 --> 0:02:13.440000
 And then the last section could either
 be a digit or a number or a value.

0:02:13.440000 --> 0:02:17.640000
 So for example, if it's a digit, that
 represents the maximum cable length

0:02:17.640000 --> 0:02:23.680000
 in meters. So for example, some of
 the older Ethernet was like 10 base

0:02:23.680000 --> 0:02:30.100000
 2. 10 base 2 was 10 megabit per second
 Ethernet, baseband, that could

0:02:30.100000 --> 0:02:34.120000
 operate over a cable that was
 roughly 200 meters in length.

0:02:34.120000 --> 0:02:37.660000
 Actually it was supportive
 of about 185 meters.

0:02:37.660000 --> 0:02:42.220000
 There was also 10 base 5, which was
 an Ethernet cable that was up to 500

0:02:42.220000 --> 0:02:44.500000
 meters in length.

0:02:44.500000 --> 0:02:48.080000
 These days typically you'll
 see like a letter there.

0:02:48.080000 --> 0:02:51.180000
 For example, T means
 twisted cable.

0:02:51.180000 --> 0:02:54.820000
 So if you see a letter that's indicating
 the type of cable that you can

0:02:54.820000 --> 0:02:59.680000
 use. So T or TX would
 be twisted pair cable.

0:02:59.680000 --> 0:03:02.620000
 And in just a second I'm going
 to show you what that means.

0:03:02.620000 --> 0:03:08.880000
 T4 and T2, which you won't see anymore,
 was using either copper cabling

0:03:08.880000 --> 0:03:13.480000
 or also twisted pair but doing the cabling
 a little bit different, a little

0:03:13.480000 --> 0:03:15.040000
 bit of the signaling different.

0:03:15.040000 --> 0:03:20.580000
 If you see something that's a letter
 other than the T, for example ZX

0:03:20.580000 --> 0:03:27.480000
 or LH, a lot of represents fiber
 optic cabling of some sort.

0:03:27.480000 --> 0:03:32.700000
 Unless you see CX, C stands
 for copper cabling.

0:03:32.700000 --> 0:03:36.880000
 So most variants of Ethernet these
 days have some sort of letter which

0:03:36.880000 --> 0:03:39.360000
 doesn't really tell you
 how long the cable is.

0:03:39.360000 --> 0:03:43.180000
 It gives you more of a reference of
 what kind of cable you're using.

0:03:43.180000 --> 0:03:46.540000
 In just a second I'll show you a chart
 that shows you those various different

0:03:46.540000 --> 0:03:51.140000
 types of cables and their maximum distances
 and everything like that.

0:03:51.140000 --> 0:03:53.980000
 But the most common form of Ethernet
 you're going to see today in most

0:03:53.980000 --> 0:03:58.080000
 local area networks where you're connecting
 laptops and PCs and servers

0:03:58.080000 --> 0:04:02.300000
 into the network is what's called
 twisted pair cabling.

0:04:02.300000 --> 0:04:04.900000
 So why do we call it twisted pair?


0:04:04.900000 --> 0:04:09.560000
 Well in twisted pair cabling you have
 a pair of copper cables that are

0:04:09.560000 --> 0:04:13.800000
 forming a complete electrical loop so
 that you can send electrical energy

0:04:13.800000 --> 0:04:17.140000
 around in this loop much like we do
 in the telephone lines that connect

0:04:17.140000 --> 0:04:19.900000
 to your telephone.

0:04:19.900000 --> 0:04:25.160000
 So in this pair of cables, for example in
 this case here we have the transmitter

0:04:25.160000 --> 0:04:29.520000
 on the left and the receiver on the right,
 one wire and the pair is sending

0:04:29.520000 --> 0:04:33.620000
 the electrical current in one direction
 and it's looping around and sending

0:04:33.620000 --> 0:04:36.880000
 the electrical current back
 in the other direction.

0:04:36.880000 --> 0:04:39.840000
 This creates an entire
 electrical circuit.

0:04:39.840000 --> 0:04:45.120000
 So in a twisted pair cabling using Ethernet
 the earliest forms of Ethernet

0:04:45.120000 --> 0:04:50.260000
 specified you have two
 pairs of cables.

0:04:50.260000 --> 0:04:54.560000
 So that means a total of four
 cables, one pair and one pair.

0:04:54.560000 --> 0:04:56.760000
 Now why do they call
 it twisted pair?

0:04:56.760000 --> 0:05:00.180000
 Well if these cables are running right
 next to each other because of the

0:05:00.180000 --> 0:05:03.620000
 way electrical energy and magnetic and
 everything works along the cable

0:05:03.620000 --> 0:05:08.860000
 their electrical energy could actually
 influence each other and scientists

0:05:08.860000 --> 0:05:12.000000
 and physicists figured out a long time
 ago that if you take a pair of

0:05:12.000000 --> 0:05:17.820000
 cables and you wrap them you twist them
 among each other it helps to mitigate

0:05:17.820000 --> 0:05:21.700000
 or prevent this electromagnetic
 interference.

0:05:21.700000 --> 0:05:24.960000
 So you don't have to worry so much about
 your ones and zeros being corrupted

0:05:24.960000 --> 0:05:29.180000
 in one wire based on the ones and zeros
 being transmitted in the wire

0:05:29.180000 --> 0:05:31.320000
 right next to it.

0:05:31.320000 --> 0:05:33.740000
 So that's why we call
 it twisted pair.

0:05:33.740000 --> 0:05:37.860000
 So up up top here here we show an example
 of what twisted pair cable looks

0:05:37.860000 --> 0:05:41.820000
 like. Vast majority of twisted pair
 cable and you're going to see today

0:05:41.820000 --> 0:05:46.520000
 each individual cable is going to have
 an outer sheath of some sort of

0:05:46.520000 --> 0:05:50.440000
 a color and then every two cables
 are going to be twisted together.

0:05:50.440000 --> 0:05:54.360000
 And so the colors just help
 you track the cables.

0:05:54.360000 --> 0:05:57.260000
 And so that's what twisted
 pair cable would look like.

0:05:57.260000 --> 0:06:02.360000
 Your most common type of Ethernet
 connector is what we call an RJ45.

0:06:02.360000 --> 0:06:04.880000
 RJ stands for registered jack.

0:06:04.880000 --> 0:06:08.820000
 Register jack 45 and
 it looks like this.

0:06:08.820000 --> 0:06:13.300000
 So you can see here inside the plastic RJ45
 you can actually see the individual

0:06:13.300000 --> 0:06:17.180000
 cables and their pins connected
 to on this jack.

0:06:17.180000 --> 0:06:20.400000
 I'll refer to that here
 in just one second.

0:06:20.400000 --> 0:06:24.820000
 Another type of Ethernet connector is
 something called a small form factor

0:06:24.820000 --> 0:06:29.860000
 pluggable or an SFP small
 form factor pluggable.

0:06:29.860000 --> 0:06:33.440000
 And you're seeing a lot of these on
 the higher speed Ethernet connectors

0:06:33.440000 --> 0:06:37.540000
 especially like the gigabit and the
 10 gigabit connections allow those

0:06:37.540000 --> 0:06:43.760000
 make use of SFPs as opposed to RJ45s
 because they're small so you can

0:06:43.760000 --> 0:06:47.940000
 put you can cram more of these into
 the same space you would have less

0:06:47.940000 --> 0:06:54.460000
 RJ45s. So when it comes to twisted
 pair ethernet cabling so if you're

0:06:54.460000 --> 0:06:57.820000
 actually going to be cabling something
 in a lab or at your house you should

0:06:57.820000 --> 0:07:00.840000
 be aware that twisted pair cable
 comes in two varieties.

0:07:00.840000 --> 0:07:03.960000
 One is called straight
 through cable.

0:07:03.960000 --> 0:07:07.520000
 So what you've got here is you're actually
 seeing one you're seeing your

0:07:07.520000 --> 0:07:11.960000
 twisted pair cable opened up and you're
 seeing the cables the actual wires

0:07:11.960000 --> 0:07:17.100000
 inside of it. So the vast majority of
 twisted pair cable these days comes

0:07:17.100000 --> 0:07:21.160000
 with eight wires although only four
 of those wires are probably actually

0:07:21.160000 --> 0:07:24.620000
 going to be used in your implementation
 of ethernet.

0:07:24.620000 --> 0:07:27.840000
 So if you were actually to make your
 own twisted pair cable you could

0:07:27.840000 --> 0:07:30.300000
 actually get away with it.

0:07:30.300000 --> 0:07:34.260000
 A lot of times you'll see eight in
 here because the manufacture of the

0:07:34.260000 --> 0:07:37.380000
 twisted pair cable they don't know
 what you're going to use it for.

0:07:37.380000 --> 0:07:39.780000
 If they knew in advance that you're
 just going to use it for regular 10

0:07:39.780000 --> 0:07:43.260000
 megabit or 100 megabit ethernet they
 would just give you cable that has

0:07:43.260000 --> 0:07:49.140000
 four wires twisted into two pairs but
 there's certain flavors of gigabit

0:07:49.140000 --> 0:07:53.960000
 ethernet that actually use four or even
 eight pairs of wires and so that's

0:07:53.960000 --> 0:07:57.920000
 why most twisted pair cables these days
 will actually have all eight wires

0:07:57.920000 --> 0:08:04.580000
 in there. So straight through simply
 means that pin number one on one

0:08:04.580000 --> 0:08:08.320000
 end of the cable goes straight to pin
 number one on the other end of the

0:08:08.320000 --> 0:08:13.500000
 cable. Pin two goes to two, three
 goes to three, so on and so forth.

0:08:13.500000 --> 0:08:18.400000
 So in other words if I go back here if
 you had an RJ45 if you had a cable

0:08:18.400000 --> 0:08:22.040000
 and you know that both ends of the cable
 are going to have an RJ45 connector

0:08:22.040000 --> 0:08:25.740000
 if you held those two RJ45 connectors
 right up next to each other and

0:08:25.740000 --> 0:08:31.700000
 you looked at them in a straight through
 cable if one RJ45 connector had

0:08:31.700000 --> 0:08:38.340000
 for example red green blue in that order
 the other RJ45 connector would

0:08:38.340000 --> 0:08:44.080000
 also have red green blue in that order
 so it's going straight through.

0:08:44.080000 --> 0:08:47.940000
 A straight through cable is used when
 you're connecting devices that reside

0:08:47.940000 --> 0:08:51.000000
 at different layers
 of the OSI model.

0:08:51.000000 --> 0:08:52.680000
 What do I mean by that?

0:08:52.680000 --> 0:08:57.600000
 Well what layer of the OSI model
 would you typically put a switch?

0:08:57.600000 --> 0:09:03.420000
 Most people would say layer two, the
 dabeling layer whereas what layer

0:09:03.420000 --> 0:09:05.280000
 would you put a router?

0:09:05.280000 --> 0:09:09.180000
 Rowers typically fall at layer three
 so those two devices are different

0:09:09.180000 --> 0:09:13.400000
 layers of the OSI model so if I was
 connecting a switch to a router I

0:09:13.400000 --> 0:09:15.860000
 would use this I would use
 a straight through cable.

0:09:15.860000 --> 0:09:21.780000
 If I'm connecting a hub to a router
 I would use a straight through cable

0:09:21.780000 --> 0:09:25.560000
 but if I'm connecting devices they're
 at the same layer for example if

0:09:25.560000 --> 0:09:29.100000
 I want to connect a switch to another
 switch or router to another router

0:09:29.100000 --> 0:09:34.480000
 then I would use what's called a crossover
 cable so devices at the same

0:09:34.480000 --> 0:09:39.380000
 layer of the OSI model use crossover
 cables and you can see this is why

0:09:39.380000 --> 0:09:43.980000
 they call it crossover because pin one
 on one side ends up at pin three's

0:09:43.980000 --> 0:09:46.280000
 position on the other.

0:09:46.280000 --> 0:09:51.820000
 Pin two ends up at pin six and this
 actually is something that if you're

0:09:51.820000 --> 0:09:56.040000
 studying for your Cisco CCNA you would
 need to know that a crossover cable

0:09:56.040000 --> 0:10:02.180000
 if you could remember one to three,
 two to six so one goes to three, two

0:10:02.180000 --> 0:10:11.180000
 goes to six and this is for devices
 when you're a PC directly to another

0:10:11.180000 --> 0:10:15.940000
 PC, a switch to a switch you
 would need a crossover cable.

0:10:15.940000 --> 0:10:21.240000
 Fortunately for us a lot of networking
 devices these days they're networking

0:10:21.240000 --> 0:10:27.740000
 adapters are what's called auto MDIX
 and auto MDIX adapters actually are

0:10:27.740000 --> 0:10:32.580000
 able to automatically detect the cable
 type so even if you use the wrong

0:10:32.580000 --> 0:10:40.780000
 cable an auto MDIX adapter will be
 able to a lot of times when you go

0:10:40.780000 --> 0:10:46.380000
 down to your Home Depot or Lowe's or
 some other electronic store to buy

0:10:46.380000 --> 0:10:50.260000
 ethernet cable that you want to build
 yourself you'll see category five,

0:10:50.260000 --> 0:10:55.440000
 category five E, category
 six what's that all mean?

0:10:55.440000 --> 0:10:59.460000
 Well each of these categories of cables
 are tested by standards bodies

0:10:59.460000 --> 0:11:03.740000
 to see if they conform to certain
 stringent requirements.

0:11:03.740000 --> 0:11:06.820000
 They put certain voltage levels on
 there and they see what the voltage

0:11:06.820000 --> 0:11:14.780000
 level comes out and they check the heat
 of the cable they check all sorts

0:11:14.780000 --> 0:11:20.300000
 of things and so the category of the cable
 gives you an idea of how rigorously

0:11:20.300000 --> 0:11:25.900000
 this cable has been tested to meet
 certain standards and so typically

0:11:25.900000 --> 0:11:29.840000
 speaking we know that in twisted pair
 cable you've got each pair of cables

0:11:29.840000 --> 0:11:31.820000
 is twisted around each other.

0:11:31.820000 --> 0:11:36.540000
 One of the things that they measure
 is how many twists per centimeter

0:11:36.540000 --> 0:11:43.120000
 is there the more twists you have per centimeter
 the less chance of electromagnetic

0:11:43.120000 --> 0:11:47.760000
 interference but think about the manufacture
 of the cable it's actually

0:11:47.760000 --> 0:11:50.860000
 going to take them a little bit more
 work their machines have to be a

0:11:50.860000 --> 0:11:56.060000
 little bit more complex to add more twists
 per centimeter so they're going

0:11:56.060000 --> 0:11:59.500000
 to charge you a little bit more for that
 the sheath of the cable you know

0:11:59.500000 --> 0:12:03.800000
 the outer ring of the cable that that
 rubber or plastic sheath the thicker

0:12:03.800000 --> 0:12:10.040000
 it is the more it will prevent
 electromagnetic interference.

0:12:10.040000 --> 0:12:13.460000
 So with as far as categories of cables
 are concerned the higher the number

0:12:13.460000 --> 0:12:20.120000
 the more twists per inch the thicker
 the sheath of that cable.

0:12:20.120000 --> 0:12:24.660000
 So here's actually a visual representation
 of this so compare the category

0:12:24.660000 --> 0:12:29.200000
 5 cable on the top with the category
 6 cable on the bottom you can clearly

0:12:29.200000 --> 0:12:34.440000
 see that as far as twists per centimeter
 are concerned the category 6

0:12:34.440000 --> 0:12:40.460000
 cable has a lot more twists in a shorter
 space a shorter length than the

0:12:40.460000 --> 0:12:44.840000
 category 5 so that category 6 cable
 is going to be more expensive for

0:12:44.840000 --> 0:12:49.160000
 you but it will give you better electromagnetic
 interference it'll prevent

0:12:49.160000 --> 0:12:52.960000
 that electromagnetic interference
 from happening.

0:12:52.960000 --> 0:12:57.440000
 So typically what you'll hear is that
 you know as far as the cabling that

0:12:57.440000 --> 0:13:00.840000
 you're running from your laptop to
 your switch or your laptop to your

0:13:00.840000 --> 0:13:05.300000
 router a lower category of cable is fine
 because you're probably not going

0:13:05.300000 --> 0:13:08.320000
 to experience electromagnetic interference
 but if you're running cabling

0:13:08.320000 --> 0:13:12.000000
 for example in a wall where there's
 probably also going to be electrical

0:13:12.000000 --> 0:13:16.220000
 cables right next to it that's carrying
 high power electrical energy well

0:13:16.220000 --> 0:13:20.380000
 you'll probably want cable that's of a
 higher category in that case because

0:13:20.380000 --> 0:13:25.640000
 it's got more twists per inch in addition
 to that you can see here that

0:13:25.640000 --> 0:13:31.240000
 the outer covering the sheath is thicker
 the higher you go up in your

0:13:31.240000 --> 0:13:36.960000
 categories so that's one thing that
 makes different twisted pair cables

0:13:36.960000 --> 0:13:42.000000
 different from each other is is the category
 the 5 5e 6 it even goes higher

0:13:42.000000 --> 0:13:45.100000
 than that and I'll show you a chart
 here in just a moment another thing

0:13:45.100000 --> 0:13:49.280000
 you can think of is when you're buying
 pre-made cables pre-made ethernet

0:13:49.280000 --> 0:13:54.720000
 twisted pair cables you might see some
 listed as shielded twisted pair

0:13:54.720000 --> 0:14:00.500000
 and others as unshielded twisted pair
 what's that referring to well that's

0:14:00.500000 --> 0:14:06.340000
 referring to yet another attempt to block
 out electromagnetic interference

0:14:06.340000 --> 0:14:11.940000
 so shielded twisted pair is going to
 be far more expensive but that is

0:14:11.940000 --> 0:14:15.540000
 blocking out a lot more electromagnetic
 interference and shielded twisted

0:14:15.540000 --> 0:14:20.720000
 pair as you can see here each pair of
 wires not only is it twisting around

0:14:20.720000 --> 0:14:25.260000
 itself but there's an outer covering
 usually like some sort of foil or

0:14:25.260000 --> 0:14:30.400000
 some sort of mesh that's around each
 pair of wires to even give you more

0:14:30.400000 --> 0:14:36.240000
 protection against electromagnetic interference
 whereas unshielded twisted

0:14:36.240000 --> 0:14:41.780000
 pair doesn't really have that so the
 moral of the story is is if you're

0:14:41.780000 --> 0:14:45.760000
 installing ethernet cable next to something
 that has a lot of probability

0:14:45.760000 --> 0:14:48.540000
 of electromagnetic interference for
 example you're installing it in a

0:14:48.540000 --> 0:14:52.640000
 ceiling or in a wall that's right next
 to your power cables leading to

0:14:52.640000 --> 0:14:56.340000
 your you know AC outlets and stuff
 in your wall you're probably going

0:14:56.340000 --> 0:15:00.160000
 on use the highest category you can
 afford and it's best to use shielded

0:15:00.160000 --> 0:15:04.980000
 twisted pair if you can afford it whereas
 unshielded twisted pair is fine

0:15:04.980000 --> 0:15:09.540000
 connecting from your laptop or your PCs
 to the switch or router that they're

0:15:09.540000 --> 0:15:17.220000
 connected to so here is that chart I
 promise to show you that shows you

0:15:17.220000 --> 0:15:21.600000
 your different categories all they have
 to category eight when I was researching

0:15:21.600000 --> 0:15:26.320000
 this I there may even be category nine
 and ten available now I was not

0:15:26.320000 --> 0:15:29.620000
 able to find any information on category
 nine and ten by found some hints

0:15:29.620000 --> 0:15:34.420000
 to it so that might also be available
 but you can see here that the length

0:15:34.420000 --> 0:15:37.780000
 is pretty standard except when you get
 up to category eight that's pretty

0:15:37.780000 --> 0:15:42.660000
 short they all support 10 megabits and
 100 megabits but when you get up

0:15:42.660000 --> 0:15:47.340000
 into the higher speeds for example 40
 gigs we need category eight cable

0:15:47.340000 --> 0:15:58.120000
 to support 40 gigs and that concludes
 this session on Ethernet so that

0:15:58.120000 --> 0:16:03.840000
 being the case I hope this series of
 videos on Ethernet has been useful

0:16:03.840000 --> 0:16:07.900000
 and beneficial to you I hope you're
 able to use it in your studies and

0:16:07.900000 --> 0:16:10.640000
 as you move forward into the networking
 world and I hope to see you again

