WEBVTT

0:00:05.000000 --> 0:00:08.980000
 So previously in the previous videos I've
 talked about how Ethernet originally

0:00:08.980000 --> 0:00:12.640000
 came out with just a single
 speed and a single duplex.

0:00:12.640000 --> 0:00:17.220000
 Basically 2.94 megabits per
 second and half duplex.

0:00:17.220000 --> 0:00:21.980000
 But over time, Ethernet speeds have greatly
 increased and Ethernet duplex

0:00:21.980000 --> 0:00:27.820000
 also changed from half duplex to full duplex
 where in today's modern networks

0:00:27.820000 --> 0:00:32.600000
 if you have your laptop per PC directly
 connected to a switch, which most

0:00:32.600000 --> 0:00:36.620000
 people do. Now you can do full duplex
 operation, meaning that you can

0:00:36.620000 --> 0:00:38.360000
 transmit bits to the switch.

0:00:38.360000 --> 0:00:43.080000
 At the exact same time, it's transmitting
 bits to you, which means you

0:00:43.080000 --> 0:00:46.420000
 don't have to do CSMA CD anymore.

0:00:46.420000 --> 0:00:51.600000
 So a couple of decades ago, Ethernet
 adapters started coming out that

0:00:51.600000 --> 0:00:54.100000
 were what were called
 dual speed adapters.

0:00:54.100000 --> 0:00:58.120000
 They could do 10 megabits per second
 or fast Ethernet 100 megabits per

0:00:58.120000 --> 0:01:02.400000
 second. And now we have triple speed
 adapters that can do 10, 100, 1000

0:01:02.400000 --> 0:01:06.500000
 Ethernet. And also these adapters were
 capable of either doing half duplex

0:01:06.500000 --> 0:01:11.060000
 or full duplex. So someone
 thought, you know what?

0:01:11.060000 --> 0:01:15.260000
 We should come up with some way that
 when you plug in your Ethernet cable

0:01:15.260000 --> 0:01:19.200000
 and that cables plugged into two different
 things, they can negotiate

0:01:19.200000 --> 0:01:24.860000
 between each other the fastest speed and
 the best duplex that they support.

0:01:24.860000 --> 0:01:29.220000
 Hence auto negotiation
 came into play.

0:01:29.220000 --> 0:01:33.280000
 So auto negotiation falls originally
 when it's first developed under the

0:01:33.280000 --> 0:01:39.000000
 802.3u specification under
 the clause 28 section.

0:01:39.000000 --> 0:01:42.160000
 And here's how auto negotiation
 basically worked.

0:01:42.160000 --> 0:01:48.280000
 So before auto negotiation existed,
 back in the days of just 10 megabit

0:01:48.280000 --> 0:01:51.300000
 per second Ethernet,
 old style Ethernet.

0:01:51.300000 --> 0:01:55.620000
 What would happen is as soon as you
 plugged in the cable to either end,

0:01:55.620000 --> 0:01:59.140000
 the NIT card connected that cable would
 start sending out a little pulse,

0:01:59.140000 --> 0:02:04.240000
 a little harpy. It was just a single electrical
 pulse every few milliseconds.

0:02:04.240000 --> 0:02:07.880000
 It was every 16 milliseconds
 as pulse would go out.

0:02:07.880000 --> 0:02:12.260000
 And that was called a normal
 link pulse or an NLP.

0:02:12.260000 --> 0:02:17.660000
 So if I had my 10 megabit per second
 PC connected to a 10 megabit per

0:02:17.660000 --> 0:02:23.240000
 second switch, when my green light
 came on, when my green LED came on

0:02:23.240000 --> 0:02:27.600000
 on my NIT card, that's because my NIT
 card was receiving these normal

0:02:27.600000 --> 0:02:31.020000
 link pulses every 10 milliseconds.


0:02:31.020000 --> 0:02:35.460000
 Then when fast Ethernet came out, they
 instead started sending out 16

0:02:35.460000 --> 0:02:39.140000
 of these pulses every 16 milliseconds,
 every 16 milliseconds, every 16

0:02:39.140000 --> 0:02:42.140000
 milliseconds, boom, boom, boom, boom,
 boom, boom, boom, boom, boom, right?

0:02:42.140000 --> 0:02:48.480000
 These 16, this was called a fast link
 pulse burst, a fast link pulse burst.

0:02:48.480000 --> 0:02:52.960000
 And then the 802.3U work group,
 they said, you know what?

0:02:52.960000 --> 0:02:58.520000
 Why don't we make use of this existing
 thing called a fast link pulse

0:02:58.520000 --> 0:03:03.800000
 burst and actually give it meaning above
 and beyond a simple heartbeat?

0:03:03.800000 --> 0:03:07.700000
 Let's turn this thing into what's called
 an auto negotiation message.

0:03:07.700000 --> 0:03:12.140000
 And so now, every single bit within
 that fast link pulse, whether it's

0:03:12.140000 --> 0:03:16.620000
 set to a zero or a one, will actually
 indicate what the supported speeds

0:03:16.620000 --> 0:03:21.680000
 are, what the supported capabilities
 are, if there's any faults, if we're

0:03:21.680000 --> 0:03:26.120000
 doing flow control using
 layer two pause frames.

0:03:26.120000 --> 0:03:32.100000
 So now this auto negotiation message
 was developed and it was based off

0:03:32.100000 --> 0:03:39.300000
 of this existing 16-bit sort of pulse
 called the fast link pulse burst.

0:03:39.300000 --> 0:03:43.660000
 Auto negotiation these days is
 on pretty much everything.

0:03:43.660000 --> 0:03:50.100000
 So any knit card you get on a laptop
 or a PC or a router or a switch is

0:03:50.100000 --> 0:03:55.800000
 most likely at minimum going to be
 a 10, 100 knit card, cable of 10 or

0:03:55.800000 --> 0:04:01.140000
 100. Many of them these
 days are 10, 100, 1000.

0:04:01.140000 --> 0:04:05.100000
 And how they are able to negotiate is
 by sending out this fast link pulse

0:04:05.100000 --> 0:04:09.300000
 message. And you can see here, here's
 an example of the 16 bits where

0:04:09.300000 --> 0:04:15.280000
 you can see the first five bits are reserved
 of 0001 and then the remaining

0:04:15.280000 --> 0:04:19.680000
 spaces can indicate what kind of speed
 and what kind of duplex you can

0:04:19.680000 --> 0:04:23.520000
 do. Now this is the original auto negotiation
 message that was 16 bits

0:04:23.520000 --> 0:04:28.340000
 long. If you're using a gigabit adapter,
 it's actually bigger than this.

0:04:28.340000 --> 0:04:32.320000
 It actually utilizes that 15th bit there,
 that one on the far right, setting

0:04:32.320000 --> 0:04:36.960000
 that to a one, which means there's another
 page, there's a next page present,

0:04:36.960000 --> 0:04:40.740000
 which means there's more auto
 negotiation bits to follow.

0:04:40.740000 --> 0:04:45.140000
 So when your knit card first comes up,
 it sends this and then it should

0:04:45.140000 --> 0:04:50.040000
 get within a maximum of sending three of
 these, it should get an acknowledgement

0:04:50.040000 --> 0:04:53.160000
 back. Meaning it should get an auto
 negotiation message back from the

0:04:53.160000 --> 0:04:57.980000
 peer with the acknowledgement bit set,
 acknowledging what supported speeds

0:04:57.980000 --> 0:05:01.180000
 and duplexes your peer
 is capable of doing.

0:05:01.180000 --> 0:05:05.360000
 And then based on that, you can negotiate
 to the highest speed and the

0:05:05.360000 --> 0:05:09.860000
 best duplex. Now an auto negotiation
 first was developed and this was

0:05:09.860000 --> 0:05:14.240000
 a while ago, this is like 20
 plus years ago probably.

0:05:14.240000 --> 0:05:20.300000
 And when it was in as infancy, it wasn't
 necessarily all that stable.

0:05:20.300000 --> 0:05:25.820000
 And the thing with auto negotiation
 was if you had two devices, like for

0:05:25.820000 --> 0:05:31.520000
 example, let's say that you had a switch
 that was capable of auto negotiation

0:05:31.520000 --> 0:05:37.420000
 connected to an older knit card on a server
 and that server did not support

0:05:37.420000 --> 0:05:38.780000
 auto negotiation.

0:05:38.780000 --> 0:05:42.780000
 Now let's say that knit card on the server
 was a fast ethernet knit card.

0:05:42.780000 --> 0:05:48.040000
 So all it could do was fast ethernet,
 100 megabits per second and it was

0:05:48.040000 --> 0:05:52.940000
 capable of full duplex or half duplex,
 but you had to set that manually.

0:05:52.940000 --> 0:05:55.880000
 So you think to yourself, oh, okay, well,
 on my server, I'm going to manually

0:05:55.880000 --> 0:05:59.700000
 set it for full duplex because after
 all it's connecting to a switch,

0:05:59.700000 --> 0:06:01.380000
 shouldn't be a problem.

0:06:01.380000 --> 0:06:03.420000
 Well, here's the problem
 that you would run into.

0:06:03.420000 --> 0:06:08.000000
 You plug it into the switch, the switch
 starts sending out its auto negotiation

0:06:08.000000 --> 0:06:11.500000
 message. What's it getting
 back from the server?

0:06:11.500000 --> 0:06:15.440000
 It's getting back just a regular fast
 link pulse burst, basically a pulse

0:06:15.440000 --> 0:06:17.760000
 of like all zeros or all ones.

0:06:17.760000 --> 0:06:21.400000
 I'm not sure which one it was, but
 it wasn't this combination of ones

0:06:21.400000 --> 0:06:25.100000
 and zeros. It was like 16 pulses
 all looking the same.

0:06:25.100000 --> 0:06:31.340000
 So the switch said, huh, okay, well,
 based on the fact that I got 16 of

0:06:31.340000 --> 0:06:35.200000
 those pulses and based on sort of the
 electrical energy used and the signal

0:06:35.200000 --> 0:06:39.620000
 and the encoding, I know that what
 I'm connected to is a fast ethernet

0:06:39.620000 --> 0:06:44.140000
 device. So the switch said, even though
 I can do 10 and 100, I know I

0:06:44.140000 --> 0:06:47.560000
 should be doing 100 because if that
 device I'm connected to was only a

0:06:47.560000 --> 0:06:51.700000
 10 megabit knit card, I would have only
 gotten a single pulse, a single

0:06:51.700000 --> 0:06:54.880000
 normal link pulse and that's
 not what I received.

0:06:54.880000 --> 0:06:57.560000
 So I can all, I can, the switch
 says I can figure out the speed.

0:06:57.560000 --> 0:06:58.940000
 I got the speed nailed down.

0:06:58.940000 --> 0:07:04.440000
 He's doing 100. But that device I'm
 connected to, I don't know what it

0:07:04.440000 --> 0:07:08.060000
 is. I know it's a knit card capable
 of fast ethernet, but is it a knit

0:07:08.060000 --> 0:07:14.500000
 card in a laptop, in a PC, in a
 hub, another switch, no idea.

0:07:14.500000 --> 0:07:20.060000
 And that device I'm connected to isn't
 telling me what duplex it can do.

0:07:20.060000 --> 0:07:24.040000
 So the auto negotiation device would
 say, hmm, since he's not telling

0:07:24.040000 --> 0:07:28.860000
 me, I'm just going to play it safe and
 I'm going to go down to half duplex.

0:07:28.860000 --> 0:07:34.000000
 And so in the early days of auto negotiation,
 when it first came out,

0:07:34.000000 --> 0:07:37.160000
 you would see a lot of white papers
 and documents that would say, oh,

0:07:37.160000 --> 0:07:41.060000
 just turn it off, statically hard code
 your speed and your duplex on both

0:07:41.060000 --> 0:07:44.460000
 sides. Because if you don't do that,
 you might end up with a situation

0:07:44.460000 --> 0:07:47.940000
 where you get half duplex
 instead of full duplex.

0:07:47.940000 --> 0:07:49.720000
 And that's not what you want.

0:07:49.720000 --> 0:07:54.460000
 But these days, here we are, 20 plus
 years later, auto negotiations very

0:07:54.460000 --> 0:07:59.220000
 stable. It's on everything and you
 don't have to worry about it.

0:07:59.220000 --> 0:08:03.000000
 It just works. So this is one of those things
 that just works in the background.

0:08:03.000000 --> 0:08:06.160000
 But if you're like me and you're wondering,
 okay, well, how does my knit

0:08:06.160000 --> 0:08:10.220000
 card know what speed it should select
 or what duplex it should select?

0:08:10.220000 --> 0:08:11.640000
 It's because of this.

0:08:11.640000 --> 0:08:13.700000
 It's because of auto negotiation.

0:08:13.700000 --> 0:08:16.740000
 And that concludes this particular
 video on auto negotiation.

0:08:16.740000 --> 0:08:20.480000
 In the next video, we're going to talk
 about the Ethernet frame structure.

