WEBVTT

0:00:07.500000 --> 0:00:11.360000
 This video, which is part of the CCT
 routing and switching curriculum,

0:00:11.360000 --> 0:00:15.820000
 is titled Differentiating
 Layer 2 Technologies.

0:00:15.820000 --> 0:00:20.380000
 My name is Keith Bogart, and I will
 be your instructor for this video.

0:00:20.380000 --> 0:00:25.440000
 As far as the video overview is concerned,
 in section 3.0 of the CCT routing

0:00:25.440000 --> 0:00:27.520000
 and switching, it has
 this on the blueprint.

0:00:27.520000 --> 0:00:32.240000
 It says differentiate between these
 Layer 2 technologies, the list sees

0:00:32.240000 --> 0:00:36.060000
 off from Ethernet, down
 to optical, and etc.

0:00:36.060000 --> 0:00:40.240000
 Now, right here, right off the bat,
 I have a problem with this bullet

0:00:40.240000 --> 0:00:43.280000
 point, and I will talk to you a little
 bit more about this in about 30

0:00:43.280000 --> 0:00:47.880000
 seconds. Namely, that some of the things
 listed on here are not Layer

0:00:47.880000 --> 0:00:52.640000
 2 technologies, specifically
 DSL and optical.

0:00:52.640000 --> 0:00:55.840000
 As you learn about networking technology,
 I don't know as you're watching

0:00:55.840000 --> 0:00:59.920000
 these videos if you've done any
 studying of the OSI model yet.

0:00:59.920000 --> 0:01:04.020000
 But in the OSI model, you have the whole,
 everything that could be done

0:01:04.020000 --> 0:01:08.620000
 in networking broken up into seven
 different functional layers.

0:01:08.620000 --> 0:01:11.380000
 Layer 1 is called the
 physical layer.

0:01:11.380000 --> 0:01:16.020000
 This means everything having to do
 with electrical impulses, how do we

0:01:16.020000 --> 0:01:21.200000
 represent a 1 in 0 via electricity,
 or how do we represent it via light?

0:01:21.200000 --> 0:01:22.840000
 What's the cable look like?

0:01:22.840000 --> 0:01:24.180000
 How thick is it?

0:01:24.180000 --> 0:01:25.760000
 How many wires should it be?

0:01:25.760000 --> 0:01:27.340000
 How long should it be?

0:01:27.340000 --> 0:01:31.280000
 All that stuff is called Layer
 1 or the physical layer.

0:01:31.280000 --> 0:01:35.100000
 And that is where DSL
 and optical reside.

0:01:35.100000 --> 0:01:37.620000
 Layer 2 is not that.

0:01:37.620000 --> 0:01:39.300000
 So what is Layer 2?

0:01:39.300000 --> 0:01:44.100000
 So in the OSI model, Layer 2 is
 called the data link layer.

0:01:44.100000 --> 0:01:48.540000
 So physical layer is Layer 1, Layer
 2 is the data link layer.

0:01:48.540000 --> 0:01:53.180000
 And the data link layer is actually
 subdividable into two sublayers.

0:01:53.180000 --> 0:01:58.280000
 The LLC sublayer, which stands for the
 logical link control, and the MAC

0:01:58.280000 --> 0:02:02.260000
 sublayer. So let's look at the MAC
 sublayer first real quickly.

0:02:02.260000 --> 0:02:08.340000
 So we know that Layer 1 is defining
 the cable, what's in the cable, how

0:02:08.340000 --> 0:02:12.180000
 1's and 0's will be actually physically
 represented by either laser light

0:02:12.180000 --> 0:02:15.900000
 or electricity or radio frequencies
 or something like that.

0:02:15.900000 --> 0:02:19.160000
 Well, the MAC sublayer says, OK, now
 that we have all that taken care

0:02:19.160000 --> 0:02:24.900000
 of, the MAC sublayer says things like,
 how do I know when I can access

0:02:24.900000 --> 0:02:29.160000
 the cable? How do I know when it's
 my turn as opposed to when I should

0:02:29.160000 --> 0:02:31.060000
 wait if somebody else is talking?

0:02:31.060000 --> 0:02:33.680000
 Or should I even be concerned
 about that?

0:02:33.680000 --> 0:02:39.520000
 When I access the cable, when I put the
 data on there, do I need to address

0:02:39.520000 --> 0:02:43.320000
 it in such a way that the destination
 knows that it's for them?

0:02:43.320000 --> 0:02:44.960000
 Or do I not care about that?

0:02:44.960000 --> 0:02:48.720000
 If I do need to address it,
 was that address look like?

0:02:48.720000 --> 0:02:50.020000
 How big should it be?

0:02:50.020000 --> 0:02:53.260000
 What do the bits represent
 in that address?

0:02:53.260000 --> 0:02:56.760000
 When something is coming in on the
 cable, how do I know it's for me?

0:02:56.760000 --> 0:03:01.540000
 All of that is stuff that the MAC
 sublayer is responsible for.

0:03:01.540000 --> 0:03:06.380000
 So if there is a protocol that does that,
 if someone develops a protocol,

0:03:06.380000 --> 0:03:09.540000
 the answer is questions like, how do
 you know when you can talk on the

0:03:09.540000 --> 0:03:12.200000
 cable? How do you know when
 you should stop talking?

0:03:12.200000 --> 0:03:15.460000
 When you get something on the cable,
 how do you identify that it's for

0:03:15.460000 --> 0:03:18.800000
 you? When you transmit something on the
 cable, how do you identify specifically

0:03:18.800000 --> 0:03:24.160000
 who it's for? If the protocol answers
 those types of questions, that is

0:03:24.160000 --> 0:03:26.500000
 a layer two protocol.

0:03:26.500000 --> 0:03:30.280000
 Where DSL and optical, they don't
 answer those questions.

0:03:30.280000 --> 0:03:31.680000
 They're physical layer stuff.

0:03:31.680000 --> 0:03:33.400000
 They're not concerned
 with that stuff.

0:03:33.400000 --> 0:03:38.980000
 Similarly, at the data link layer, we have
 the logical link control sublayer,

0:03:38.980000 --> 0:03:44.000000
 which is stuff, for example, like,
 okay, we know that one layer up at

0:03:44.000000 --> 0:03:47.500000
 the networking layer, there's a lot of
 protocols that reside at the networking

0:03:47.500000 --> 0:03:53.700000
 layer. There's IP version four, IP version
 six, Apple talk, IPX, all kinds

0:03:53.700000 --> 0:04:00.600000
 of stuff. So here we are at the physical
 layer and we got, we got electricity

0:04:00.600000 --> 0:04:04.200000
 coming in at different voltages representing
 ones and zeros, ones and

0:04:04.200000 --> 0:04:09.240000
 zeros. Now, the Mac sublayer looks at
 those ones and zeros and ones and

0:04:09.240000 --> 0:04:10.640000
 zeros. This is okay.

0:04:10.640000 --> 0:04:15.220000
 According to the protocol that I run,
 according to the rules that I follow,

0:04:15.220000 --> 0:04:19.400000
 this first set of ones and zeros represents
 the destination address.

0:04:19.400000 --> 0:04:21.300000
 Is that my address?

0:04:21.300000 --> 0:04:23.660000
 Oh, yes it is. That's my address.

0:04:23.660000 --> 0:04:26.100000
 Okay, great. I'm going to
 start picking this up.

0:04:26.100000 --> 0:04:28.360000
 Okay, now all the ones
 and zeros stop.

0:04:28.360000 --> 0:04:29.900000
 Okay, I have my frame.

0:04:29.900000 --> 0:04:30.620000
 Here's my frame.

0:04:30.620000 --> 0:04:32.020000
 I know it's for me.

0:04:32.020000 --> 0:04:35.740000
 Now, the next question, this thing says,
 is okay, I'm going to pass this

0:04:35.740000 --> 0:04:38.440000
 up to the LLC sublayer.

0:04:38.440000 --> 0:04:40.100000
 Mac sublayer says I'm done.

0:04:40.100000 --> 0:04:41.040000
 I know this is for me.

0:04:41.040000 --> 0:04:43.120000
 I got it all. I verified
 it's okay.

0:04:43.120000 --> 0:04:45.200000
 It's not messed up in some way.

0:04:45.200000 --> 0:04:48.140000
 And by the way, that's also something
 the Mac sublayer does.

0:04:48.140000 --> 0:04:51.840000
 Error checking. Are any of these ones
 and zeros screwed up from the time

0:04:51.840000 --> 0:04:54.000000
 that they were transmitted
 by the sender?

0:04:54.000000 --> 0:04:56.400000
 Not going to talk about how it does
 that, but that's a responsibility,

0:04:56.400000 --> 0:04:57.740000
 the Mac sublayer.

0:04:57.740000 --> 0:04:59.780000
 So the Mac sublayer says,
 my job is done.

0:04:59.780000 --> 0:05:01.720000
 Hey, LLC sublayer.

0:05:01.720000 --> 0:05:02.960000
 Here's the frame.

0:05:02.960000 --> 0:05:04.680000
 Here's all the ones and
 bits I picked up.

0:05:04.680000 --> 0:05:06.340000
 It's for us. It's okay.

0:05:06.340000 --> 0:05:12.760000
 Here you go. So the LLC sublayer gets
 it and says, okay, I know my job

0:05:12.760000 --> 0:05:15.100000
 is I need to pass it upstream.

0:05:15.100000 --> 0:05:17.280000
 But I got a lot of stuff up there.


0:05:17.280000 --> 0:05:19.940000
 I got IPv4 that might be
 waiting for something.

0:05:19.940000 --> 0:05:23.540000
 IPv6, Apple Talk,
 IPX, other things.

0:05:23.540000 --> 0:05:30.220000
 The LLC sublayer is responsible for figuring
 out how do I send it to IPv4?

0:05:30.220000 --> 0:05:31.780000
 How do I send it to IPv6?

0:05:31.780000 --> 0:05:35.700000
 Whatever is up there, the next layer
 at the networking layer, how do I

0:05:35.700000 --> 0:05:39.760000
 get it to the appropriate
 protocol up there?

0:05:39.760000 --> 0:05:44.040000
 And similarly, all these protocols,
 you know, in your laptop, if you're

0:05:44.040000 --> 0:05:48.500000
 running IPv4 and IPv6 at the same time,
 which these days, you probably

0:05:48.500000 --> 0:05:50.340000
 are, even if you're
 not aware of it.

0:05:50.340000 --> 0:05:55.780000
 That means your laptop's processor is
 creating IP, is creating data with

0:05:55.780000 --> 0:06:01.360000
 IPv4 addresses, creating data with
 IPv6 addresses, and all that stuff

0:06:01.360000 --> 0:06:05.700000
 is going down to your
 Ethernet NIC card.

0:06:05.700000 --> 0:06:09.960000
 Well, it's the LLC sublayer that's responsible
 for grabbing all that stuff.

0:06:09.960000 --> 0:06:12.860000
 So the NIC card can
 talk to layer three.

0:06:12.860000 --> 0:06:15.280000
 That's the responsibility of LLC.

0:06:15.280000 --> 0:06:20.660000
 So once again, if a protocol knows
 how to do that, that is a layer two

0:06:20.660000 --> 0:06:25.560000
 protocol. Once again, DSL and optical,
 they don't know how to do that.

0:06:25.560000 --> 0:06:28.260000
 They're physical layer stuff.

0:06:28.260000 --> 0:06:31.320000
 And typically, we say that devices that
 are used at the data link layer

0:06:31.320000 --> 0:06:33.700000
 are switches and bridges.

0:06:33.700000 --> 0:06:38.540000
 But really, anything with a NIC card
 operates at the data link layer.

0:06:38.540000 --> 0:06:42.700000
 Really, you can't connect to a network
 without operating the data link

0:06:42.700000 --> 0:06:46.120000
 layer. Your laptop operates
 at the data link layer.

0:06:46.120000 --> 0:06:48.620000
 A router operates at
 the data link layer.

0:06:48.620000 --> 0:06:52.420000
 A Wi-Fi access point operates
 at the data link layer.

0:06:52.420000 --> 0:06:56.240000
 If you're not touching the data link
 layer, you have no connectivity to

0:06:56.240000 --> 0:06:57.480000
 the physical layer.

0:06:57.480000 --> 0:07:00.860000
 And if you have no connectivity to the
 physical layer, you're not networking.

0:07:00.860000 --> 0:07:02.720000
 You're not talking to anybody.

0:07:02.720000 --> 0:07:09.860000
 So let's differentiate between these various
 different layer two protocols.

0:07:09.860000 --> 0:07:14.700000
 So I have include on here the actual
 real true layer two protocols.

0:07:14.700000 --> 0:07:18.240000
 Notice that in the bullet point, even
 though it mentions serial and optical

0:07:18.240000 --> 0:07:22.780000
 and DSL, those are not
 layer two protocols.

0:07:22.780000 --> 0:07:25.860000
 So I'm not concluding them
 in my chart right here.

0:07:25.860000 --> 0:07:27.440000
 So let me zoom in on this here.

0:07:27.440000 --> 0:07:29.760000
 And let's just go through each one of
 these things as a bullet point so

0:07:29.760000 --> 0:07:31.980000
 we can sort of differentiate
 between them.

0:07:31.980000 --> 0:07:36.680000
 Okay. So the true layer two protocols,
 all the ones I could come up with

0:07:36.680000 --> 0:07:41.900000
 off the top of my head, were the various
 flavors of ethernet, asynchronous

0:07:41.900000 --> 0:07:48.880000
 transfer mode, that's ATM, integrated
 services, digital network, that's

0:07:48.880000 --> 0:07:57.840000
 ISDN, frame relay, the point to point
 protocol, PPP, and the high level

0:07:57.840000 --> 0:08:02.640000
 data link control
 protocol or HDLC.

0:08:02.640000 --> 0:08:06.220000
 Now these are all things that answer
 those various questions.

0:08:06.220000 --> 0:08:09.940000
 All these protocols I wrote here answer
 the questions of how do I know

0:08:09.940000 --> 0:08:11.440000
 when it's my turn to go?

0:08:11.440000 --> 0:08:14.640000
 When something comes in off the wire,
 how do I know if it's for me?

0:08:14.640000 --> 0:08:17.840000
 When I'm putting something on the wire,
 do I need to address it to the

0:08:17.840000 --> 0:08:21.280000
 destination? And if so,
 how do I do that?

0:08:21.280000 --> 0:08:24.020000
 All these protocols answer
 those questions.

0:08:24.020000 --> 0:08:26.300000
 So how are they different
 from each other?

0:08:26.300000 --> 0:08:27.860000
 Well, in a variety of ways.

0:08:27.860000 --> 0:08:32.940000
 Number one, some of these protocols
 are used in local area networks.

0:08:32.940000 --> 0:08:36.680000
 They're specifically designed to be
 used between devices that are fairly

0:08:36.680000 --> 0:08:39.440000
 close in proximity to each other.

0:08:39.440000 --> 0:08:43.780000
 So that is ethernet, fast ethernet,
 and gigabit ethernet.

0:08:43.780000 --> 0:08:48.220000
 Now there are gigabit ethernet can blur
 the lines because if you're doing

0:08:48.220000 --> 0:08:52.200000
 gigabit ethernet over fiber optic cabling,
 you can actually have that

0:08:52.200000 --> 0:08:53.640000
 go for quite a bit of distance.

0:08:53.640000 --> 0:08:57.920000
 So gigabit ethernet could potentially
 be used in WANs as well.

0:08:57.920000 --> 0:09:01.080000
 But usually when we're thinking of
 ethernet, we're thinking of LANs.

0:09:01.080000 --> 0:09:03.480000
 We're not thinking of WANs.

0:09:03.480000 --> 0:09:05.040000
 Now what about WANs?

0:09:05.040000 --> 0:09:08.480000
 In other words, what layer two protocols
 are designed to operate across

0:09:08.480000 --> 0:09:12.860000
 vast distances, hundreds
 or thousands of miles?

0:09:12.860000 --> 0:09:14.600000
 That would be everything else.

0:09:14.600000 --> 0:09:18.340000
 So all these layer two protocols here
 were specifically designed to operate

0:09:18.340000 --> 0:09:22.760000
 across wide area networks.

0:09:22.760000 --> 0:09:27.140000
 Broadcast based, what
 does that mean?

0:09:27.140000 --> 0:09:30.860000
 Some of these protocols were designed
 around this assumption.

0:09:30.860000 --> 0:09:34.640000
 They were designed around the assumption
 that when I put data on a wire,

0:09:34.640000 --> 0:09:39.420000
 there are going to be many potential
 devices connected to the same wire

0:09:39.420000 --> 0:09:44.980000
 as me. Which means that when I put
 data on the wire, I have to address

0:09:44.980000 --> 0:09:48.720000
 that data. I have to put some sort
 of destination address so that even

0:09:48.720000 --> 0:09:52.420000
 though everybody's going to see it,
 only the guy actually want to pick

0:09:52.420000 --> 0:09:54.140000
 it up will pick it up.

0:09:54.140000 --> 0:09:57.020000
 There's nothing I can do to prevent
 everybody from seeing it.

0:09:57.020000 --> 0:09:58.860000
 We're all connected
 to the same wire.

0:09:58.860000 --> 0:10:02.420000
 But only the guy who needs it is actually
 going to pay attention to it.

0:10:02.420000 --> 0:10:04.900000
 That is called broadcast based.

0:10:04.900000 --> 0:10:07.740000
 For example, when you and a bunch of
 your friends get into a room and

0:10:07.740000 --> 0:10:10.620000
 you all start talking together,
 that's broadcast based.

0:10:10.620000 --> 0:10:13.500000
 Even if you're the only one talking,
 everybody's going to hear you.

0:10:13.500000 --> 0:10:15.180000
 You can't help that.

0:10:15.180000 --> 0:10:21.000000
 So all the flavors of ethernet were designed
 around broadcast based networks.

0:10:21.000000 --> 0:10:25.840000
 Which means ethernet needs to specifically
 address its data to the destination

0:10:25.840000 --> 0:10:28.380000
 device that it's going to.

0:10:28.380000 --> 0:10:31.740000
 Because we want to make sure that people
 who don't need it, don't pick

0:10:31.740000 --> 0:10:33.580000
 it up and listen to it.

0:10:33.580000 --> 0:10:40.380000
 These other protocols from ATM all the
 way down to HDLC are what's called

0:10:40.380000 --> 0:10:43.460000
 point to point based protocols.

0:10:43.460000 --> 0:10:48.520000
 Which means that this protocol has
 the assumption that when I put data

0:10:48.520000 --> 0:10:51.920000
 on the wire, it can
 only go one place.

0:10:51.920000 --> 0:10:54.440000
 There's not multiple destinations
 on this wire.

0:10:54.440000 --> 0:10:58.320000
 When I put data on the wire, there's
 only one in place it can go to at

0:10:58.320000 --> 0:11:05.020000
 the other end. ATM, ISDN, Frame Relay,
 PPP, and HDLC are all like that.

0:11:05.020000 --> 0:11:09.920000
 Now as you learn about Frame Relay,
 that's a little bit debatable.

0:11:09.920000 --> 0:11:13.700000
 But Frame Relay is definitely
 not broadcast based.

0:11:13.700000 --> 0:11:17.840000
 There is no way to put a Frame Relay
 frame on a wire and have multiple

0:11:17.840000 --> 0:11:22.880000
 devices see that one single
 Frame Relay frame.

0:11:22.880000 --> 0:11:27.080000
 Hence, it is not broadcast based.

0:11:27.080000 --> 0:11:29.520000
 Require setup signaling.

0:11:29.520000 --> 0:11:33.020000
 What's that referring to?

0:11:33.020000 --> 0:11:36.820000
 Okay, so some of these protocols are
 sort of like when you pick up the

0:11:36.820000 --> 0:11:41.500000
 phone. Right? Now, if you're in the
 White House and you've got the Red

0:11:41.500000 --> 0:11:45.060000
 phone in front of you and you pick it
 up, you don't have to dial a number.

0:11:45.060000 --> 0:11:47.500000
 You are automatically connected
 to the Pentagon.

0:11:47.500000 --> 0:11:50.260000
 Right? But at your house,
 that's not the case.

0:11:50.260000 --> 0:11:54.320000
 When you pick up that phone, it's not
 going anywhere until you type in

0:11:54.320000 --> 0:11:58.820000
 some digits, which means you are
 sending signaling information.

0:11:58.820000 --> 0:12:01.260000
 You're telling the telephone company
 via those digits you're punching

0:12:01.260000 --> 0:12:05.920000
 in, this is the remote destination,
 in this case, telephone number that

0:12:05.920000 --> 0:12:07.360000
 I want to talk to.

0:12:07.360000 --> 0:12:11.100000
 And then the telephone company sets
 up a path or what we call a circuit

0:12:11.100000 --> 0:12:13.580000
 between you and the
 remote telephone.

0:12:13.580000 --> 0:12:16.640000
 And now you can talk
 across that line.

0:12:16.640000 --> 0:12:20.420000
 But when you first pick up the phone,
 there's no circuit established.

0:12:20.420000 --> 0:12:23.760000
 You have to send some sort of signaling
 information to say, this is where

0:12:23.760000 --> 0:12:26.020000
 I want the circuit to end.

0:12:26.020000 --> 0:12:32.500000
 So, ATM, if you're using what's called
 switched virtual circuits, that's

0:12:32.500000 --> 0:12:35.860000
 what SVC stands for, is like that.


0:12:35.860000 --> 0:12:38.480000
 ISDN is definitely like that.

0:12:38.480000 --> 0:12:40.980000
 ISDN uses like a phone number.

0:12:40.980000 --> 0:12:44.580000
 Frame relay can also be set up with
 something called switched virtual

0:12:44.580000 --> 0:12:50.400000
 circuits. And PPP was designed around
 the assumption that it could go

0:12:50.400000 --> 0:12:53.900000
 multiple places, but you have to signal
 first and say where you want to

0:12:53.900000 --> 0:13:02.660000
 go. As opposed to all of the flavors
 of Ethernet are always on.

0:13:02.660000 --> 0:13:06.220000
 Right? When you put an Ethernet frame
 on the wire, you don't have to first

0:13:06.220000 --> 0:13:08.060000
 say, hey, not, not, not wire.

0:13:08.060000 --> 0:13:10.360000
 Are you awake? Come on,
 I need to use you.

0:13:10.360000 --> 0:13:11.560000
 You don't have to do that.

0:13:11.560000 --> 0:13:12.400000
 The wire is always there.

0:13:12.400000 --> 0:13:13.060000
 It's always available.

0:13:13.060000 --> 0:13:16.240000
 You can immediately put
 your data on that wire.

0:13:16.240000 --> 0:13:18.300000
 So all flavors of Ethernet
 are like that.

0:13:18.300000 --> 0:13:21.640000
 If you're using what's called a permanent
 virtual circuit, which means

0:13:21.640000 --> 0:13:25.440000
 a circuit that's always up, like that
 red phone connecting the white house

0:13:25.440000 --> 0:13:29.000000
 to the Pentagon, that would be
 a permanent virtual circuit.

0:13:29.000000 --> 0:13:29.780000
 It's always available.

0:13:29.780000 --> 0:13:34.620000
 It's always up and always ties two devices
 together that's always available.

0:13:34.620000 --> 0:13:38.600000
 So ATM and frame relay when using permanent
 virtual circuits is always

0:13:38.600000 --> 0:13:43.340000
 on. Doesn't need any signaling.

0:13:43.340000 --> 0:13:47.500000
 HDLC was designed around the assumption
 that the circuit's riding across

0:13:47.500000 --> 0:13:53.240000
 is always up. HDLC and doesn't
 have any kind of addressing.

0:13:53.240000 --> 0:13:57.320000
 When you put data inside of an HDLC
 header, there's no layer to address

0:13:57.320000 --> 0:14:00.580000
 there. HDLC says, hey, why
 do I need to address it?

0:14:00.580000 --> 0:14:01.980000
 It can only go to one person.

0:14:01.980000 --> 0:14:06.080000
 At the other end of the line,
 there's just one person there.

0:14:06.080000 --> 0:14:10.880000
 And then lastly, some of these layer
 two, some of these specifications,

0:14:10.880000 --> 0:14:20.320000
 for example, all the flavors of Ethernet
 as well as ATM and ISDN not only

0:14:20.320000 --> 0:14:24.580000
 reside at layer two of the OSI model,
 they also reside at layer one of

0:14:24.580000 --> 0:14:29.000000
 the OSI model. For example, if you open
 up an Ethernet document, you'll

0:14:29.000000 --> 0:14:33.340000
 see in there not only answers to the
 questions that layer two has, which

0:14:33.340000 --> 0:14:35.580000
 is how do I know when I can go?

0:14:35.580000 --> 0:14:37.660000
 How do I know when I
 should stop talking?

0:14:37.660000 --> 0:14:39.960000
 When something comes in, how
 do I know it's for me?

0:14:39.960000 --> 0:14:41.640000
 Those are all layer two questions.


0:14:41.640000 --> 0:14:45.000000
 But the Ethernet document also answers
 questions like, was the cable look

0:14:45.000000 --> 0:14:46.500000
 like? Does it use copper?

0:14:46.500000 --> 0:14:47.720000
 How many strands of copper?

0:14:47.720000 --> 0:14:49.300000
 How long can the cable be?

0:14:49.300000 --> 0:14:51.180000
 What kind of voltage
 is used for one?

0:14:51.180000 --> 0:14:52.520000
 What's used for a zero?

0:14:52.520000 --> 0:14:54.120000
 That's all layer one stuff.

0:14:54.120000 --> 0:14:59.400000
 So all the flavors of Ethernet in addition
 to ATM and ISDN also specify

0:14:59.400000 --> 0:15:03.260000
 layer one as well as layer two.

0:15:03.260000 --> 0:15:06.860000
 And that's a pretty good breakdown there
 of differentiating between our

0:15:06.860000 --> 0:15:08.420000
 layer two protocols.

