WEBVTT

0:00:07.280000 --> 0:00:11.440000
 This video is part of the Cisco Certified
 Technician for routing and switching

0:00:11.440000 --> 0:00:15.960000
 series. It comes specifically from
 Section 4 of the blueprint for that

0:00:15.960000 --> 0:00:20.920000
 certification. The title of this
 video is using TFTP servers.

0:00:20.920000 --> 0:00:25.840000
 My name is Keith Bogart and I will be
 your instructor for this session.

0:00:25.840000 --> 0:00:30.180000
 So in this session we're covering one
 bullet point from Section 4 of the

0:00:30.180000 --> 0:00:36.220000
 exam blueprint, which specifically reads,
 configure and use a TFTP server

0:00:36.220000 --> 0:00:39.400000
 such as TFTPD32.

0:00:39.400000 --> 0:00:42.140000
 Okay, so let's start out.

0:00:42.140000 --> 0:00:44.860000
 Why might we need a TFTP server?

0:00:44.860000 --> 0:00:48.640000
 Well in the context of being a Cisco
 field technician working with Cisco

0:00:48.640000 --> 0:00:52.580000
 routers and switches, which is the most
 obvious, the most relevant reason

0:00:52.580000 --> 0:00:57.820000
 would be to do either iOS software
 upgrades or downgrades.

0:00:57.820000 --> 0:01:04.240000
 So when you get onto a Cisco device, for
 example here, if I want to upgrade

0:01:04.240000 --> 0:01:08.180000
 or downgrade the software, step number
 one is you have to know where in

0:01:08.180000 --> 0:01:14.400000
 software, where in memory the Cisco
 iOS software is normally stored.

0:01:14.400000 --> 0:01:16.780000
 Now if you've been watching some of
 my previous videos, hopefully you

0:01:16.780000 --> 0:01:19.960000
 will know that is typically
 in flash memory.

0:01:19.960000 --> 0:01:23.660000
 So we can do the command
 directory flash colon.

0:01:23.660000 --> 0:01:26.860000
 I'll go ahead and expand
 that right here.

0:01:26.860000 --> 0:01:30.880000
 And from there you can see if you have
 any Cisco iOS software in there.

0:01:30.880000 --> 0:01:34.980000
 So let's say that this is buggy or for
 whatever reason I want to upgrade

0:01:34.980000 --> 0:01:38.740000
 that to a different version, I want
 to downgrade to a different version.

0:01:38.740000 --> 0:01:43.340000
 So now I need to get some new
 software into this device.

0:01:43.340000 --> 0:01:44.820000
 Now how do we do that?

0:01:44.820000 --> 0:01:49.020000
 Well the most typical way you do
 it is using the copy command.

0:01:49.020000 --> 0:01:55.080000
 And with the copy command you say copy,
 the next argument will be where

0:01:55.080000 --> 0:01:57.000000
 am I copying from?

0:01:57.000000 --> 0:02:00.240000
 So if you use a question mark here
 you can see you can copy from a lot

0:02:00.240000 --> 0:02:06.500000
 of places. You can copy from one, you
 can copy from flash into, for example

0:02:06.500000 --> 0:02:10.020000
 your NV RAM. Or in this particular case
 we could say, well I want to copy

0:02:10.020000 --> 0:02:13.280000
 from a TFTP server.

0:02:13.280000 --> 0:02:17.140000
 You could also use an FTP
 server or an HTTP server.

0:02:17.140000 --> 0:02:21.660000
 But specifically we're going to be saying
 I want to copy from a TFTP server.

0:02:21.660000 --> 0:02:24.620000
 That's where the file resides.

0:02:24.620000 --> 0:02:28.440000
 And then the next argument is where
 do you want to put that file?

0:02:28.440000 --> 0:02:33.960000
 In this case it's going to be flash
 colon, copy TFTP flash colon.

0:02:33.960000 --> 0:02:37.020000
 And then when you hit enter it's going
 to prompt you for several things

0:02:37.020000 --> 0:02:38.220000
 to finish this off.

0:02:38.220000 --> 0:02:42.060000
 For example like the IP address of the
 TFTP server, the name of the file

0:02:42.060000 --> 0:02:44.620000
 and so on and so forth.

0:02:44.620000 --> 0:02:48.820000
 So step number two is I'm assuming that
 in this process you have already

0:02:48.820000 --> 0:02:53.800000
 downloaded the relevant Cisco iOS
 software onto your laptop or PC.

0:02:53.800000 --> 0:02:58.000000
 Or if you actually have a dedicated
 server running as a TFTP server onto

0:02:58.000000 --> 0:03:01.020000
 that machine. So I'm not going to go
 through that process but that would

0:03:01.020000 --> 0:03:03.780000
 be the second step is you know make sure
 that you actually have downloaded

0:03:03.780000 --> 0:03:05.040000
 the software and it's ready to go.


0:03:05.040000 --> 0:03:09.860000
 So in my particular case I'm just going
 to be using my laptop as a server.

0:03:09.860000 --> 0:03:17.780000
 And within my documents folder here
 I've created an iOS images folder.

0:03:17.780000 --> 0:03:21.040000
 And if I click on that you can see
 I've got a couple of iOS images in

0:03:21.040000 --> 0:03:24.240000
 there. So for demonstration purposes
 I'm just going to be downloading

0:03:24.240000 --> 0:03:29.800000
 the exact same iOS images already on
 this router which is my 1841 image.

0:03:29.800000 --> 0:03:35.980000
 Because the process is the same.

0:03:35.980000 --> 0:03:37.880000
 So that's that's step number two.

0:03:37.880000 --> 0:03:41.380000
 Make sure you have your iOS image and
 make sure you know what folder you've

0:03:41.380000 --> 0:03:47.160000
 stored it in. Alright next step is if
 I'm going to be doing this via TFTP

0:03:47.160000 --> 0:03:52.220000
 I need to install some TFTP server
 application onto my laptop.

0:03:52.220000 --> 0:03:56.180000
 And like the bullet point says one of
 the three ones that we can use is

0:03:56.180000 --> 0:04:03.000000
 TFTPD. And TFTPD has the original version
 was TFTPD32 for 32 bit operating

0:04:03.000000 --> 0:04:04.840000
 systems like older Windows 95.

0:04:04.840000 --> 0:04:06.520000
 And stuff like that.

0:04:06.520000 --> 0:04:11.940000
 And now they also have TFTPD64
 for 64 bit operating systems.

0:04:11.940000 --> 0:04:13.380000
 So where do you find that?

0:04:13.380000 --> 0:04:18.580000
 Real easy. Just go ahead and go to Google
 our good friend here and type

0:04:18.580000 --> 0:04:23.800000
 in TFTPD and you can say 32.

0:04:23.800000 --> 0:04:26.420000
 Or if you know that
 you want to do 64.

0:04:26.420000 --> 0:04:35.140000
 64. And as of this recording in 2017
 you would be going to this codeplex

0:04:35.140000 --> 0:04:42.220000
 website. So if I go right there and
 that takes me to what it looks like.

0:04:42.220000 --> 0:04:44.360000
 And then you just
 click on download.

0:04:44.360000 --> 0:04:47.580000
 Now I've already downloaded it
 so I'm going to skip that step.

0:04:47.580000 --> 0:04:52.520000
 So once you download it you will have
 an icon on your laptop that looks

0:04:52.520000 --> 0:04:56.220000
 like this. Let me go ahead and
 zoom in on that a little bit.

0:04:56.220000 --> 0:04:58.880000
 There you can see what
 that looks like.

0:04:58.880000 --> 0:05:07.200000
 And once you double click on that you will
 be opening up the TFTPD application.

0:05:07.200000 --> 0:05:09.780000
 And here is what it looks like.

0:05:09.780000 --> 0:05:14.660000
 Now a couple things about this
 that I want to point out.

0:05:14.660000 --> 0:05:27.620000
 So number one. Let me go ahead
 and move this to one moment.

0:05:27.620000 --> 0:05:30.760000
 Okay, so some things I want
 to point out with this.

0:05:30.760000 --> 0:05:37.220000
 Okay, first of all notice
 the server interface.

0:05:37.220000 --> 0:05:42.380000
 So it's very conceivable that your laptop
 PC or actual server that you're

0:05:42.380000 --> 0:05:45.620000
 using has more than one
 network connection.

0:05:45.620000 --> 0:05:49.880000
 For example in my case my laptop has
 both a Wi-Fi connection and a wired

0:05:49.880000 --> 0:05:54.520000
 connection. So ideally you want to
 use your wired ethernet connection

0:05:54.520000 --> 0:05:56.760000
 because it's faster,
 it's more reliable.

0:05:56.760000 --> 0:05:59.900000
 You're not competing in the Wi-Fi airspace
 with other devices trying to

0:05:59.900000 --> 0:06:01.740000
 connect to the same SSID.

0:06:01.740000 --> 0:06:03.660000
 So that's number one.

0:06:03.660000 --> 0:06:05.460000
 Now how do you control that?

0:06:05.460000 --> 0:06:10.520000
 Well, if I go over here
 and click on settings.

0:06:10.520000 --> 0:06:14.400000
 Okay, actually this isn't where
 you change the IP address.

0:06:14.400000 --> 0:06:15.900000
 Right here in the drop-down menu.

0:06:15.900000 --> 0:06:19.560000
 If you click on that it'll show you all
 the IP addresses that you currently

0:06:19.560000 --> 0:06:23.280000
 have. Now certainly you wouldn't want
 to use your loopback address 127.

0:06:23.280000 --> 0:06:25.940000
 You don't want to use any
 of these a PIPA addresses.

0:06:25.940000 --> 0:06:31.060000
 So this 192.168 that's the address of
 my Wi-Fi card I could select that

0:06:31.060000 --> 0:06:32.540000
 if that's all I have.

0:06:32.540000 --> 0:06:37.060000
 But in my particular case my
 wired ethernet NIC is 1112.

0:06:37.060000 --> 0:06:38.800000
 So I want to select that one.

0:06:38.800000 --> 0:06:40.640000
 Which brings us to the next point.


0:06:40.640000 --> 0:06:44.160000
 In order for this whole thing to work
 your network device like your router

0:06:44.160000 --> 0:06:49.460000
 or switch has to have IP reachability
 to the TFTP server wherever that

0:06:49.460000 --> 0:06:52.520000
 happens to be. Now in my case
 I'm making it super simple.

0:06:52.520000 --> 0:06:57.780000
 I actually have a wired ethernet cable
 directly connected between the

0:06:57.780000 --> 0:07:01.220000
 RJ45 jack on my docking
 station and my laptop.

0:07:01.220000 --> 0:07:04.540000
 Going directly into my router's
 fast ethernet port.

0:07:04.540000 --> 0:07:07.700000
 Now in reality you probably
 won't be able to do this.

0:07:07.700000 --> 0:07:12.560000
 So that's the next point which is make
 sure that you have a connection

0:07:12.560000 --> 0:07:17.160000
 between your laptop or
 PC and the router.

0:07:17.160000 --> 0:07:18.560000
 And then test it.

0:07:18.560000 --> 0:07:27.140000
 So for example if I go to my router
 I should just be able to ping the

0:07:27.140000 --> 0:07:31.080000
 IP address of my TFTP server
 which in this case is 1112.

0:07:31.080000 --> 0:07:33.900000
 And you can see I can ping it.

0:07:33.900000 --> 0:07:35.760000
 Now a disclaimer here.

0:07:35.760000 --> 0:07:39.220000
 If you're using a Windows operating
 system not Windows server but like

0:07:39.220000 --> 0:07:43.780000
 a Windows client like Windows 7,
 Windows 10, something like that.

0:07:43.780000 --> 0:07:47.700000
 A lot of Windows operating systems when
 you have Windows firewall turned

0:07:47.700000 --> 0:07:52.020000
 on which a lot of times is on by default
 or some other firewall like ABG

0:07:52.020000 --> 0:07:53.340000
 or something else.

0:07:53.340000 --> 0:08:01.080000
 They block incoming pings.

0:08:01.080000 --> 0:08:04.980000
 But if you tried pinging your
 laptop you get nothing.

0:08:04.980000 --> 0:08:07.700000
 And that's actually what I experienced
 before I started this video.

0:08:07.700000 --> 0:08:10.520000
 From the laptop I could ping this router
 than I'm directly connected to

0:08:10.520000 --> 0:08:13.660000
 but from the router I could
 not ping the laptop.

0:08:13.660000 --> 0:08:15.600000
 So there's several
 ways around that.

0:08:15.600000 --> 0:08:19.740000
 Certainly the most complex way would be
 to go into whatever firewall application

0:08:19.740000 --> 0:08:23.980000
 you've got running on your laptop or PC
 and create some new inbound firewall

0:08:23.980000 --> 0:08:29.120000
 rules allowing inbound pings from the
 source address of whatever your

0:08:29.120000 --> 0:08:31.600000
 network connection
 is of your router.

0:08:31.600000 --> 0:08:36.620000
 Of course a much more simplest solution
 although it's less secure is to

0:08:36.620000 --> 0:08:39.200000
 simply disable your firewall
 temporarily.

0:08:39.200000 --> 0:08:40.700000
 So that's what I did.

0:08:40.700000 --> 0:08:43.640000
 I started out by creating some inbound
 rules just got a feel for that

0:08:43.640000 --> 0:08:44.720000
 what that's like.

0:08:44.720000 --> 0:08:48.680000
 I decided just to completely disable
 my firewall just for the few minutes

0:08:48.680000 --> 0:08:52.060000
 I'm doing this video here so I wouldn't
 have to worry about did I create

0:08:52.060000 --> 0:08:53.640000
 the rule correctly?

0:08:53.640000 --> 0:08:56.320000
 Did I specify the correct
 port numbers?

0:08:56.320000 --> 0:08:59.680000
 But just be aware that if you do have
 a firewall running on your TFTP

0:08:59.680000 --> 0:09:04.620000
 server make sure that number one it allows
 incoming pings so you can test

0:09:04.620000 --> 0:09:09.720000
 reachability to that server and make sure
 it allows incoming TFTP requests.

0:09:09.720000 --> 0:09:13.940000
 A lot of firewalls also have that blocked
 so that when your router switch

0:09:13.940000 --> 0:09:18.940000
 tries to initiate TFTP trying to get that
 file it's blocked by your firewall.

0:09:18.940000 --> 0:09:22.900000
 So it might just be easier for you to
 turn your firewall off temporarily

0:09:22.900000 --> 0:09:25.160000
 so you can not worry about that.

0:09:25.160000 --> 0:09:30.600000
 Okay so I've got the IP address of
 my TFTP server which is my laptop.

0:09:30.600000 --> 0:09:34.320000
 I verify that I can ping it that
 I can reach it so that's good.

0:09:34.320000 --> 0:09:39.840000
 I verified I have the Cisco iOS image
 I verified what file it stored in

0:09:39.840000 --> 0:09:44.880000
 in my laptop. I've opened up my
 TFTP application right here.

0:09:44.880000 --> 0:09:49.780000
 I have confirmed that it's using the
 correct IP address and if it's not

0:09:49.780000 --> 0:09:53.440000
 I use the drop down menu here
 to select the IP address.

0:09:53.440000 --> 0:09:58.880000
 Now the last step is this is not the
 correct folder right now as we see

0:09:58.880000 --> 0:10:04.760000
 it right here. So this C colon programs
 file TFTP64 that's not where I

0:10:04.760000 --> 0:10:08.500000
 have my iOS image so I need
 to change that folder.

0:10:08.500000 --> 0:10:11.080000
 So there's a couple ways you could
 do that right here you can click on

0:10:11.080000 --> 0:10:15.660000
 the browse button and select the folder
 so in my case it's under libraries,

0:10:15.660000 --> 0:10:20.160000
 documents, my documents
 and iOS images.

0:10:20.160000 --> 0:10:22.400000
 Now technically I'm good to go.

0:10:22.400000 --> 0:10:27.360000
 At this point this TFTP server is with
 just its default settings ready

0:10:27.360000 --> 0:10:31.400000
 to go. Now if you want to change some
 of the settings which you can I

0:10:31.400000 --> 0:10:32.860000
 don't recommend you do this.

0:10:32.860000 --> 0:10:38.420000
 You can click on that settings
 button right there.

0:10:38.420000 --> 0:10:42.080000
 And from in here you can change your
 base directory instead of using the

0:10:42.080000 --> 0:10:45.140000
 browse button that I just did in the
 other place you can do it there.

0:10:45.140000 --> 0:10:48.920000
 TFTP doesn't really have security it's
 not like FTP that's one of the

0:10:48.920000 --> 0:10:52.900000
 benefits of FTP is you've got username
 and password you can configure.

0:10:52.900000 --> 0:10:56.320000
 TFTP doesn't really have that so I'm
 not even really sure why it's got

0:10:56.320000 --> 0:10:59.840000
 this as an option right
 here quite frankly.

0:10:59.840000 --> 0:11:06.060000
 I've also read online that if you want
 to speed up your TFTP session one

0:11:06.060000 --> 0:11:10.360000
 thing you can try doing is clicking right
 here where it says use anticipation

0:11:10.360000 --> 0:11:15.920000
 window. You get a warning saying your
 TFTP client might not support that.

0:11:15.920000 --> 0:11:18.860000
 And I've read on a couple different
 websites that if you increase that

0:11:18.860000 --> 0:11:24.440000
 to like 4,092 bytes that can significantly
 increase your TFTP download

0:11:24.440000 --> 0:11:29.460000
 speed. I've tried it in my particular
 case it didn't help if anything

0:11:29.460000 --> 0:11:33.400000
 it made things worse sometimes so
 I am not going to click that.

0:11:33.400000 --> 0:11:36.040000
 But I just want you to know that you
 could try that out to see if it has

0:11:36.040000 --> 0:11:37.900000
 any effect on you.

0:11:37.900000 --> 0:11:41.200000
 Probably don't want to click any
 of these other things right here.

0:11:41.200000 --> 0:11:48.080000
 Okay. Now right now it's giving me some
 messages about the DHCP server.

0:11:48.080000 --> 0:11:50.880000
 I don't care about the DHCP server I don't
 plan on using that so I'm actually

0:11:50.880000 --> 0:11:54.760000
 going to go here to my global options
 and disable the DHCP server.

0:11:54.760000 --> 0:11:58.380000
 I don't care about that so I don't want
 to care about those error messages.

0:11:58.380000 --> 0:12:00.260000
 It says you have to restart.

0:12:00.260000 --> 0:12:03.300000
 Okay look what just happened right
 it just got rid of my directory.

0:12:03.300000 --> 0:12:06.260000
 So I'm not going to bother restarting
 I'm just going to change the directory

0:12:06.260000 --> 0:12:12.740000
 again back to what it should be documents
 my documents iOS images.

0:12:12.740000 --> 0:12:16.520000
 And now we should be ready to go.

0:12:16.520000 --> 0:12:21.560000
 So at this point I'm just going to put
 this up here in the corner a little

0:12:21.560000 --> 0:12:27.240000
 bit. And the command we
 want to use is copy.

0:12:27.240000 --> 0:12:31.540000
 Actually let me go to my file first
 of all it has my iOS images in it.

0:12:31.540000 --> 0:12:35.820000
 I'm just going to right click on
 the name and click on rename.

0:12:35.820000 --> 0:12:37.460000
 I'm not doing this to rename it.

0:12:37.460000 --> 0:12:40.420000
 I'm just doing this to real quickly
 get the name so I can copy it so I'm

0:12:40.420000 --> 0:12:52.800000
 highlighting it and I'm pressing
 Ctrl C or just copy.

0:12:52.800000 --> 0:12:57.000000
 So I'm going to hit enter it's going
 to prompt me so because I already

0:12:57.000000 --> 0:13:00.600000
 did this lab before I record this it
 already has cached the IP address

0:13:00.600000 --> 0:13:04.760000
 of 1112. In your particular case you'd
 want to type in the IP address

0:13:04.760000 --> 0:13:07.080000
 of your actual TFTP server.

0:13:07.080000 --> 0:13:11.520000
 It has also cached the name the file
 name but you know I did copy it so

0:13:11.520000 --> 0:13:15.740000
 I can just right click here
 and paste it back in.

0:13:15.740000 --> 0:13:17.480000
 It says destination file name.

0:13:17.480000 --> 0:13:18.620000
 You don't want to change this.

0:13:18.620000 --> 0:13:21.460000
 This would be like if you were downloading
 a config file or something

0:13:21.460000 --> 0:13:25.200000
 like that you might want to rename
 the config file from whatever it is

0:13:25.200000 --> 0:13:27.940000
 on the TFTP server to
 this device here.

0:13:27.940000 --> 0:13:30.560000
 And that's another use of TFTP if you
 want to use it to download config

0:13:30.560000 --> 0:13:35.440000
 files into flash memory for long term
 storage or something like that.

0:13:35.440000 --> 0:13:39.060000
 But in this case I don't want to change
 the name of my Cisco iOS image.

0:13:39.060000 --> 0:13:43.380000
 Now it says there's already a file with
 this name do I want to overwrite.

0:13:43.380000 --> 0:13:48.620000
 If I had enough flash memory to store
 two or more images I would say no.

0:13:48.620000 --> 0:13:51.760000
 But in this case I don't have enough
 flash memory to store two images

0:13:51.760000 --> 0:13:54.840000
 simultaneously so yes
 I have to overwrite.

0:13:54.840000 --> 0:13:59.700000
 So I hit enter and now it says it's
 accessing and you can see there it

0:13:59.700000 --> 0:14:06.920000
 goes. If I actually take a look at TFTP
 D32 or in this case TFTP D64 you

0:14:06.920000 --> 0:14:10.540000
 can see that it is slowly
 incrementing.

0:14:10.540000 --> 0:14:16.240000
 Now my particular case is not that fast
 it's only about 240, 242,000 bits

0:14:16.240000 --> 0:14:20.480000
 per second so not anywhere even close
 to the ethernet speed that it could

0:14:20.480000 --> 0:14:25.440000
 be. But it is chugging along we can
 see here in the progress it's 16%.

0:14:25.440000 --> 0:14:30.600000
 So if I let this video go for another
 oh three or four minutes this would

0:14:30.600000 --> 0:14:36.060000
 be done. But that basically is it that
 is how to use a TFTP server to

0:14:36.060000 --> 0:14:38.560000
 download a Cisco iOS image.

0:14:38.560000 --> 0:14:42.720000
 We could have also used that exact
 same process to upload my Cisco iOS

0:14:42.720000 --> 0:14:46.780000
 image if I want to have a copy of it
 residing on a TFTP server for other

