[&] Every device connected to a network has a minimum of \_\_\_\_ addresses. (Select the best answer)
- Two (2)
- One (1)
- Four (4)
- Three (3)

[&] Which of the following devices is purpose-built with an RF Transceiver to facilitate networking? (Select the best answer)
- Hub
- Access Point
- Layer-2 Switch

[&] PC-A has an IP address of 1.1.1.1.  PC-B has an IP address of 2.2.2.2.  If PC-A and PC-B wish to exchange data over a network, what type of device will need to be in that network to facilitate that communication? (Select the best answer)
- Hub
- Access Point
- Router
- Layer-2 Switch

[&] Which of the following is an advantage of using a Router instead of a Switch? (Select the best answer)
- Routers typically contain a greater quantity of interfaces than switches
- Routers have MAC Address-Tables which allow faster processing of frames
- Routers are the only devices that can route IP packets between networks
- Routers interfaces can support both LAN and WAN protocols

[&] Most end-user devices with wired connections to a network will connect to what type of networking device? (Select the best answer)
- Access Point
- Router
- Switch
- Hub

[&] What type of security is enforced by a Switch's MAC Address-Table? (Select the best answer)
- Frames may not be layer-2 switched between different VLANs
- MAC Address-Tables do not enforce any security
- Unicast frames are only allowed to be flooded to a maximum of three interfaces
- Broadcast frames are not flooded out multiple ports

[&] Regardless of whether a switch is a Layer-2 or Layer-3 switch, all switches contain a \_\_\_\_\_\_? (Select the best answer)
- MAC Address-Table
- Routing Table
- DHCP Table
- ARP Table

[&] What is the technical term for the component of a switch that is responsible for looking at a frame as it is received and determining what to do with that frame? (Select the best answer)
- Path Engine
- Routing Engine
- MAC Address-Table
- Forwarding Engine

[&] Which of the following statements are true? (Select the best answer)
- All of these answers are correct.
- In most cases, when multiple network users are connected to a Switch only one user may transmit at any given time.
- In most cases, when multiple network users are connected to an Access Point only one user may transmit at any given time.
- In most cases, when multiple network users are connected to a Router only one user may transmit at any given time.