﻿1
00:00:02,001 --> 00:00:09,000
[music]

2
00:00:09,300 --> 00:00:12,600
Next is going to be 6to4 tunnels.

3
00:00:12,600 --> 00:00:15,900
And the advantage to these
is they're dynamic,

4
00:00:15,900 --> 00:00:22,100
they're multi-point, so it will
just build a tunnel with whoever

5
00:00:22,100 --> 00:00:23,300
it needs to build a tunnel to.

6
00:00:23,600 --> 00:00:28,700
The advantage is we're not going to
be putting in a tunnel destination.

7
00:00:28,700 --> 00:00:32,300
So the two previous examples we looked at,

8
00:00:32,300 --> 00:00:37,700
the GRE and the IP6 IP are point-to-point.

9
00:00:37,700 --> 00:00:39,200
You had a tunnel source.

10
00:00:39,200 --> 00:00:40,700
You had a tunnel destination.

11
00:00:40,700 --> 00:00:42,500
The tunnel comes up.

12
00:00:42,500 --> 00:00:45,800
You exchange routing protocols, whatever.

13
00:00:45,800 --> 00:00:52,500
Now as we go into 6to4 in ISATAP,
I'm not going to say you can't run

14
00:00:52,500 --> 00:00:54,300
routing protocols over this.

15
00:00:54,300 --> 00:01:00,000
There are various methods, and
tricks, and such to do so.

16
00:01:00,000 --> 00:01:02,400
We're not going to go
into that today because,

17
00:01:02,700 --> 00:01:07,280
honestly, 6to4 and ISATAP, I don't
think they're going to get used

18
00:01:07,280 --> 00:01:08,780
very much in the real world.

19
00:01:09,080 --> 00:01:14,780
As we move forward, we have MPLS,
we have DMVPN which are both,

20
00:01:14,780 --> 00:01:17,180
ultimately I think, better solutions.

21
00:01:17,480 --> 00:01:19,580
But, we want to look at this anyway.

22
00:01:19,580 --> 00:01:20,781
We don't want to leave anything out.

23
00:01:20,781 --> 00:01:25,580
So we'll do 6to4 and ISATAP, but we're
just going to use static routes

24
00:01:25,580 --> 00:01:29,480
with these. I'm not going to get
into all the tricks you can do to

25
00:01:29,480 --> 00:01:32,180
get OSPF or EIGRP to come up over these.

26
00:01:32,480 --> 00:01:36,680
And, of course, the problem with
that is there's no destination.

27
00:01:36,680 --> 00:01:39,980
That's what it comes into,
is there's no destination.

28
00:01:39,980 --> 00:01:45,680
So we can do it, it can be done, but
I don't think it's really worth

29
00:01:45,680 --> 00:01:47,480
going into a huge discussion on.

30
00:01:47,480 --> 00:01:50,780
This is going to be using the same
topology that we've been using

31
00:01:51,080 --> 00:01:51,680
the whole time.

32
00:01:51,980 --> 00:01:55,580
And once again, we'll go between R1 and R4,

33
00:01:55,880 --> 00:01:57,380
and just going over to Switch 2.

34
00:01:57,380 --> 00:02:02,480
Most of these other sites are for
when we get into MPLS and DMVPN,

35
00:02:02,480 --> 00:02:06,380
although we certainly could bring
them in here if we wanted to.

36
00:02:06,689 --> 00:02:10,280
And you'll see that this config can
just be duplicated for multiple

37
00:02:10,580 --> 00:02:12,080
sites. It's not a big deal.

38
00:02:12,080 --> 00:02:18,980
Let's switch over to the command
line, and once again we'll start

39
00:02:18,980 --> 00:02:19,880
with router 1.

40
00:02:19,880 --> 00:02:22,580
I have no config on this at all yet.

41
00:02:22,880 --> 00:02:25,880
I took the tunnel out that we
had on from previous labs.

42
00:02:26,180 --> 00:02:33,680
We're going to say interface tunnel
0, and this is where the real

43
00:02:33,980 --> 00:02:36,380
fun sort of begins.

44
00:02:36,680 --> 00:02:42,968
Let's look at this first
before we get too far.

45
00:02:42,980 --> 00:02:49,280
Do Show IP Interface

46
00:02:49,280 --> 00:02:52,280
brief. Because as we start
configuring our tunnel,

47
00:02:52,280 --> 00:02:57,380
what we need to know is what our
egress interface is going to be.

48
00:02:57,380 --> 00:03:02,480
In the last two sections I built
the tunnel between loopbacks,

49
00:03:02,780 --> 00:03:04,880
and we could do that here too.

50
00:03:05,181 --> 00:03:07,880
It's just not nearly as much fun.

51
00:03:07,880 --> 00:03:11,180
We're going to actually build
this between our physicals.

52
00:03:11,180 --> 00:03:13,880
That means that from
router 1's perspective,

53
00:03:13,880 --> 00:03:19,280
if you look back at the diagram, he's
going to be going from FA 00.12,

54
00:03:19,280 --> 00:03:25,880
and his address is 173.1.12.1.

55
00:03:25,880 --> 00:03:29,480
This is just really where the fun begins.

56
00:03:29,780 --> 00:03:39,380
Here we go. IPv6 address-- if you
read the documentation they tell

57
00:03:39,380 --> 00:03:43,080
you that 6to4 tunnels are supposed
to use the 2002 address space.

58
00:03:43,080 --> 00:03:47,580
Realistically speaking you could
technically do whatever you want.

59
00:03:47,580 --> 00:03:48,780
It doesn't really matter.

60
00:03:48,780 --> 00:03:52,680
But you're supposed to, fine,
we'll stick with that.

61
00:03:52,680 --> 00:03:54,780
Here's where the fun comes in.

62
00:03:55,080 --> 00:04:01,080
2002 is supposed to be the
first 16 bits - great.

63
00:04:01,080 --> 00:04:08,280
The next two fields, the next two
fields are going to be in our case

64
00:04:08,580 --> 00:04:30,180
AD01:C01. Translation
of 173 is AD1.1.12.C.1,

65
00:04:30,180 --> 00:04:38,280
so it's the IPv4 address of the
underlying egress interface for the

66
00:04:38,280 --> 00:04:47,780
tunnel has to be in bits 17 through--
ultimately it's going to be

67
00:04:48,080 --> 00:04:57,080
48. Those next two fields need to
be your IPv4 address converted

68
00:04:57,080 --> 00:05:01,280
to hex. By the way in case you
haven't figured it out yet,

69
00:05:01,280 --> 00:05:05,180
that right there is the
problem with these tunnels.

70
00:05:05,180 --> 00:05:08,480
As we go through this,
well, what's the good?

71
00:05:08,780 --> 00:05:09,380
What's the bad?

72
00:05:09,380 --> 00:05:11,480
Pros and cons - there's
your con right there.

73
00:05:11,480 --> 00:05:16,030
Who's going to go convert all
your IPv4 address to hex?

74
00:05:16,030 --> 00:05:19,330
I'll do it for you, you have my
email address at the beginning of

75
00:05:19,330 --> 00:05:22,031
the course. I'll be happy to do it for you.

76
00:05:22,281 --> 00:05:24,680
I charge by the prefix though.

77
00:05:24,980 --> 00:05:25,580
Just so you know.

78
00:05:25,880 --> 00:05:29,180
No, seriously though, this
is going to be a real pain.

79
00:05:29,180 --> 00:05:31,880
And then just give it a host portion.

80
00:05:31,880 --> 00:05:35,180
I honestly don't care what the rest
of it is - something like /64,

81
00:05:35,180 --> 00:05:39,080
fine. If you want to specify the
link local address you can.

82
00:05:39,380 --> 00:05:41,980
In this case it's not
going to really matter.

83
00:05:41,980 --> 00:05:47,380
Now we say, tunnel source, and you
have to tie this to the interface

84
00:05:47,680 --> 00:05:50,380
that we just did the IP.

85
00:05:50,380 --> 00:06:02,380
It's FA 00.12, and tunnel mode IPv6
IP which is what we did in the

86
00:06:02,380 --> 00:06:10,480
previous lesson, but we have to
follow it up with 6to4 because this

87
00:06:10,480 --> 00:06:11,680
is a 6to4 tunnel.

88
00:06:11,680 --> 00:06:17,080
Now what that tells the router by
setting the mode to IPv6IP 6to4

89
00:06:17,080 --> 00:06:23,980
that tells him, okay, so here's the
deal when a packet shows up since

90
00:06:24,280 --> 00:06:31,780
I am a 6to4 tunnel I know that I'm
going to get the tunnel destination

91
00:06:31,780 --> 00:06:35,980
out of these fields right here.

92
00:06:36,280 --> 00:06:38,080
Now I'm going to get back
to that in a second.

93
00:06:38,080 --> 00:06:42,280
Before I go any further though I
want to go set up the tunnel on

94
00:06:42,580 --> 00:06:43,480
the other side.

95
00:06:43,480 --> 00:06:47,380
Let's go over to router 4 and
say, interface tunnel 0,

96
00:06:47,680 --> 00:06:51,180
probably want to say, Do
Show IP Interface Brief,

97
00:06:51,480 --> 00:07:02,880
so then we can say, tunnel source
ins FA 0/0.34 tunnel mode is IPv6

98
00:07:03,180 --> 00:07:17,080
IP 6to4. And the IPv6 address is 2002:,

99
00:07:17,080 --> 00:07:22,180
and the translation on this one
is also going to be ad01:.

100
00:07:22,180 --> 00:07:34,780
But this one, the 34 translates to 2204.

101
00:07:34,780 --> 00:07:42,280
So 22 for the 34, 4 for the 4, ::4
just to give them a host portion.

102
00:07:42,280 --> 00:07:48,580
Okay, now that's all fine.

103
00:07:48,580 --> 00:07:53,080
Here's the problem.

104
00:07:53,080 --> 00:08:02,292
First off, you've got to get
all traffic with a 2002 to go

105
00:08:02,292 --> 00:08:03,192
to this tunnel.

106
00:08:03,192 --> 00:08:09,192
I'm trying to think of the best way
to explain the overall problem

107
00:08:09,492 --> 00:08:13,692
here. Maybe the best way is just
to bluntly shove it right at you.

108
00:08:13,692 --> 00:08:18,192
That is the network portion on router 4.

109
00:08:18,192 --> 00:08:22,092
His network portion has a 2204 in it.

110
00:08:22,092 --> 00:08:29,292
On router 1, his network
portion has AC01 in it.

111
00:08:29,292 --> 00:08:34,992
These guys aren't on the same network.

112
00:08:34,992 --> 00:08:41,292
We have two ends of a tunnel that
are not on the same network.

113
00:08:41,292 --> 00:08:47,592
When they designed the 6to4 tunnel,
the idea was to embed the IPv4

114
00:08:47,892 --> 00:08:50,592
address because again,
what have I not typed,

115
00:08:50,592 --> 00:08:52,092
even though the tunnel says up?

116
00:08:52,392 --> 00:08:55,092
I never said tunnel destination.

117
00:08:55,092 --> 00:09:02,292
Not once. Who is he supposed to
build this tunnel to? That's what

118
00:09:02,592 --> 00:09:07,592
we don't know. Where we're supposed
to find out is out of these two

119
00:09:07,592 --> 00:09:09,692
fields, that's great.

120
00:09:09,992 --> 00:09:16,492
But here's the problem, they put
it in the network portion instead

121
00:09:16,792 --> 00:09:20,392
of the host portion it honestly
should have probably been in the

122
00:09:20,392 --> 00:09:23,992
host portion. We're going to talk
about ISATAP in the next lesson

123
00:09:24,293 --> 00:09:29,092
and that's what they did, they
put it in the host portion.

124
00:09:29,392 --> 00:09:34,192
But since it's in our network portion
that means that we're now going to

125
00:09:34,192 --> 00:09:40,792
have to manually push all the
traffic for 2002 down the tunnel.

126
00:09:40,792 --> 00:09:57,892
IPv6 route 2002::/16 to tunnel 0,
and do the exact same thing on

127
00:09:58,192 --> 00:10:08,092
router 4. We have to push all the
2002 traffic into the tunnel.

128
00:10:08,092 --> 00:10:16,492
But that's not even enough, because
our network is using 2001 and

129
00:10:16,492 --> 00:10:18,592
such for the other locations.

130
00:10:18,592 --> 00:10:27,892
So now we have to teach each side
how to get to the subnets on the

131
00:10:28,192 --> 00:10:32,092
other sides. Let's see,
I'm on router 4 here?

132
00:10:32,092 --> 00:10:43,792
Now I'm going to need IPv6 route
to 2001 DB8:100:-- we'll say 7

133
00:10:44,092 --> 00:10:48,892
::/64. Where does that go?

134
00:10:49,192 --> 00:10:55,992
To tunnel 0. But here's the
key to this whole thing.

135
00:10:56,292 --> 00:11:00,792
This is the key to what
makes 6to4 work right here.

136
00:11:00,792 --> 00:11:20,592
Next hop 2002 AD01 C01::1 - router
1's tunnel address for the 6to4.

137
00:11:20,592 --> 00:11:22,692
How does this work?

138
00:11:22,992 --> 00:11:29,592
Very simple, here comes a packet
to this router going to router 1's

139
00:11:29,892 --> 00:11:33,792
loopback 1 interface. That's what
that is in case you're not real

140
00:11:33,792 --> 00:11:34,992
familiar looking at the diagram.

141
00:11:35,292 --> 00:11:41,292
That's router 1's loopback 1 interface
and I see it goes to tunnel

142
00:11:41,292 --> 00:11:45,492
0 to this next-hop 2002.

143
00:11:45,492 --> 00:11:50,092
Now this recursive look up is what
puts the 2002 into the tunnel,

144
00:11:50,092 --> 00:11:53,392
not to mention of course we're
pushing it down tunnel 0.

145
00:11:53,392 --> 00:12:01,292
But this right here is the magic, the
router sees that in the next-hop,

146
00:12:01,292 --> 00:12:06,392
sees that it's a 2002 address,
and that it's a 6to4 tunnel,

147
00:12:06,692 --> 00:12:16,592
and it goes, oh, so AD01:C01, that's
the IPv4 address of the device

148
00:12:16,592 --> 00:12:18,692
that I need to build the tunnel to.

149
00:12:18,992 --> 00:12:22,892
That's your destination right there.

150
00:12:22,892 --> 00:12:26,792
It pulls it out because he
knows he's a 6to4 tunnel,

151
00:12:26,792 --> 00:12:31,592
so it pulls it out of the next-hop
from the routing protocol.

152
00:12:31,592 --> 00:12:36,992
But I hope you can see why it makes
it very difficult to run a dynamic

153
00:12:36,992 --> 00:12:38,792
routing protocol over this.

154
00:12:38,792 --> 00:12:41,492
I did not say impossible, I said difficult.

155
00:12:41,792 --> 00:12:47,192
I could do BGP and instead
of putting this IPv6 route,

156
00:12:47,492 --> 00:12:54,392
I could've said neighbor 2002:AD01:C01::1.

157
00:12:54,392 --> 00:12:58,892
I could use that for my neighborship,
and that would tell me who

158
00:12:58,892 --> 00:13:00,092
to build the tunnel to.

159
00:13:00,092 --> 00:13:05,792
Okay, so the trick is, is that
we're using that address,

160
00:13:05,792 --> 00:13:12,392
the IPv6 address of the other side
of the tunnel as the destination

161
00:13:12,392 --> 00:13:13,892
for our frames.

162
00:13:13,892 --> 00:13:15,692
That's all we need to do.

163
00:13:15,692 --> 00:13:20,192
That's it. Now, it'd be
nice if our switches,

164
00:13:20,492 --> 00:13:22,892
and everybody, could learn about this.

165
00:13:22,892 --> 00:13:31,592
We probably also want to follow up with
IPv6 router EIGRP 100 redistribute

166
00:13:31,592 --> 00:13:33,992
static metric.

167
00:13:34,292 --> 00:13:40,892
Then we pretty much do the
opposite on the other end.

168
00:13:40,892 --> 00:13:54,092
We say IPv6 route
2001DBA:100:8::/64 out tunnel 0,

169
00:13:54,092 --> 00:14:07,592
with a next-hop of 2002: and
this one would be AD01:2204::4.

170
00:14:07,592 --> 00:14:29,192
There we go. And if we've
done our job correctly,

171
00:14:29,492 --> 00:14:42,392
we should be able to go over to our switch
and say to trace to 2001:DB8:100:8::8.

172
00:14:42,392 --> 00:14:44,493
And there we go.

173
00:14:44,493 --> 00:14:50,092
You can see right here how it's
passing through the tunnel right

174
00:14:50,392 --> 00:14:52,493
there, using those addresses.

175
00:14:52,493 --> 00:14:55,792
Again, how did it learn the destination?

176
00:14:55,792 --> 00:14:58,492
The destination is right there.

177
00:14:58,492 --> 00:15:00,592
It's right out of the static route.

178
00:15:00,592 --> 00:15:04,792
So, again, these work fine.

179
00:15:04,792 --> 00:15:08,992
Like I said, dynamic routing
is a little tricky over them.

180
00:15:08,992 --> 00:15:10,192
Certainly, not impossible.

181
00:15:10,492 --> 00:15:14,692
BGP's actually the easiest of
them, to be honest with you.

182
00:15:14,692 --> 00:15:19,492
But, there it is.

183
00:15:19,492 --> 00:15:21,592
Static's, of course, easy.

184
00:15:21,892 --> 00:15:23,392
Just redistribute the static then.

185
00:15:23,692 --> 00:15:26,092
So, what are the advantages
and disadvantages?

186
00:15:26,392 --> 00:15:28,792
The advantage is it's dynamic.

187
00:15:29,092 --> 00:15:30,892
I didn't have to put in
a tunnel destination.:15:19.760000
 But there it is.

0:15:19.760000 --> 0:15:21.740000
 Static's of course easy.

0:15:21.740000 --> 0:15:23.640000
 Just redistribute the static then.


0:15:23.640000 --> 0:15:26.360000
 So what are the advantages
 and disadvantages?

0:15:26.360000 --> 0:15:29.000000
 The advantage is it's dynamic.

0:15:29.000000 --> 0:15:31.280000
 I didn't have to put in
 a tunnel destination.

0:15:31.280000 --> 0:15:36.920000
 So if I had 400 remote sites, it would
 just mean 400 static routes with

0:15:36.920000 --> 0:15:40.160000
 their next hop set appropriately.

0:15:40.160000 --> 0:15:46.980000
 Now, obviously the huge downside would
 be while the 400 static routes,

0:15:46.980000 --> 0:15:50.780000
 it's sort of a double edged
 sword there, right?

0:15:50.780000 --> 0:15:55.060000
 But the point is you're not making 400
 tunnel interfaces and 400 subnets

0:15:55.060000 --> 0:15:58.960000
 and manually setting 400 destinations
 and all that.

0:15:58.960000 --> 0:16:02.460000
 In a way, you sort of are
 through the routing.

0:16:02.460000 --> 0:16:05.400000
 But that's why I said, you know, if you
 really have that many remote sites

0:16:05.400000 --> 0:16:09.820000
 and you're going to use six to four
 tunnels, maybe BGP would be a really

0:16:09.820000 --> 0:16:11.400000
 good way to do that.

0:16:11.400000 --> 0:16:16.360000
 And just have it bring up BGP neighbor
 relationships and then do that.

0:16:16.360000 --> 0:16:19.800000
 Or like I said, if you do a little
 bit of research, you'll find how to

0:16:19.800000 --> 0:16:23.900000
 run various dynamic routing
 protocols over this.

0:16:23.900000 --> 0:16:26.220000
 It's not easy. It's not clean.

0:16:26.220000 --> 0:16:29.520000
 And believe me when I say there's
 better options anyway.

0:16:29.520000 --> 0:16:31.940000
 But it is functional.

0:16:31.940000 --> 0:16:33.740000
 It's here. It works.

0:16:33.740000 --> 0:16:37.560000
 So, that's pretty much
 six to four tunnels.

0:16:37.560000 --> 0:16:41.440000
 They work fine. They're just a little
 bit tedious with the configuration

0:16:41.440000 --> 0:16:47.740000
 because you have to convert all the
 IPv4 addresses over to hacks.

0:16:47.740000 --> 0:16:49.160000
 And again, that's really no fun.

