﻿1
00:00:02,034 --> 00:00:08,398
[music]

2
00:00:08,399 --> 00:00:18,278
Okay, time for MPLS 6VPE. Hopefully
you just finished the lesson on 6PE,

3
00:00:18,279 --> 00:00:20,961
and this is going to build on that.

4
00:00:20,962 --> 00:00:26,624
Just to bring up our diagram-- again,
this is the diagram for the slides,

5
00:00:26,625 --> 00:00:32,383
but I'm going to bring up my live diagram
here, which is sort of the same.

6
00:00:32,384 --> 00:00:35,402
I've just been marking up on
this one here a little bit.

7
00:00:37,182 --> 00:00:40,860
What we want to take a look at here is,

8
00:00:40,861 --> 00:00:44,833
we're going to make some changes
to what we did earlier,

9
00:00:44,834 --> 00:00:50,199
but really just to the extent
of bringing VRFs into this.

10
00:00:50,200 --> 00:00:52,353
So we're simply going to create,

11
00:00:52,353 --> 00:00:56,698
in this case, we'll do-- let's
see. I'll just grab a pen here.

12
00:00:56,700 --> 00:01:01,721
We'll do VRFA, and maybe we'll
bring in customer B, we'll see.

13
00:01:01,722 --> 00:01:05,182
But that would be A and
B, this would be VRFA,

14
00:01:05,182 --> 00:01:10,999
VRFA, VRFB - and that's if we
decide to run it down there.

15
00:01:11,000 --> 00:01:14,033
We'll see how we're doing here.

16
00:01:14,034 --> 00:01:22,678
Now as a reminder, on router 1, 4
and 5 I already have BGP running.

17
00:01:22,679 --> 00:01:28,771
I did actually-- in the cleanup from
the previous section I did actually

18
00:01:28,772 --> 00:01:31,487
get rid of the IPv6 address family.

19
00:01:31,488 --> 00:01:37,664
We don't need it anymore, all we need
now is the VPNv6 address family.

20
00:01:37,665 --> 00:01:45,068
And I also had to kill OSPF on the
PE routers because we can't run

21
00:01:45,069 --> 00:01:50,824
it the way we had it before. Up until
now we've just been running straight,

22
00:01:50,825 --> 00:01:57,660
call it legacy if you will,
config for OSPF version 3.

23
00:01:57,661 --> 00:02:03,662
Now, we're going to move into
actually doing VRFs here.

24
00:02:03,663 --> 00:02:08,510
So let's jump into the config, and
we'll start at least with customer A

25
00:02:08,510 --> 00:02:12,673
and we'll see how that goes, if we
want to get into customer B here.

26
00:02:12,674 --> 00:02:18,675
So let's go over to router 1. And the first
thing is, if you've used VRFs before,

27
00:02:18,676 --> 00:02:23,989
you might be very tempted to type ip vrf A.

28
00:02:23,990 --> 00:02:33,133
And the problem with that is, once you
look at the VRFs, it's only protocol IPv4.

29
00:02:33,134 --> 00:02:38,745
That would be because you typed ip vrf A.

30
00:02:38,745 --> 00:02:48,682
No. What you need is the new
format, vrf definition A,

31
00:02:48,683 --> 00:02:52,342
and then we'll set up our
route distinguishers,

32
00:02:52,354 --> 00:02:54,802
so route distinguisher 100:100.

33
00:02:57,791 --> 00:03:08,653
Route target 100:100. Address family
IPv4 and address family IPv6.

34
00:03:08,654 --> 00:03:12,184
We're not going to do IPv4 today,
but I'm going to assume that you

35
00:03:12,185 --> 00:03:17,514
would ultimately want support
for that. So, do show vrf.

36
00:03:17,515 --> 00:03:22,080
Now, notice we have both protocols.

37
00:03:22,081 --> 00:03:28,837
No interfaces yet, but we're going
to do that next. So there's VRFA.

38
00:03:28,839 --> 00:03:34,158
Just in case we decide to
use it, vrf definition B.

39
00:03:43,762 --> 00:03:46,355
Nice of it to tell at me
since I typed it wrong.

40
00:03:51,291 --> 00:03:56,603
So route distinguisher, route
target, address family IPv4,

41
00:03:56,604 --> 00:04:04,863
address family-- 65, IPv6, okay.
So there's that.

42
00:04:04,864 --> 00:04:07,959
We can go do the same thing on router 4.

43
00:04:24,959 --> 00:04:27,086
And 5.

44
00:05:17,223 --> 00:05:23,638
And A and B on router 5. So that's
step one, actually create the VRFs.

45
00:05:23,639 --> 00:05:26,229
Step two, let's go back to router 1.

46
00:05:26,230 --> 00:05:30,284
Let's actually put the interfaces in
there. And what I would do if I were you

47
00:05:30,285 --> 00:05:35,162
is I would say, interface fa0/0.71.

48
00:05:35,163 --> 00:05:40,730
Do show run interface fa0/0.71,
before I did anything.

49
00:05:40,731 --> 00:05:46,502
Because then what you're going to
have to say is, vrf forwarding A,

50
00:05:49,663 --> 00:05:55,450
and it's going to remove
this, which I just put

51
00:05:55,462 --> 00:06:00,898
back in, and this, which
I just put back in.

52
00:06:00,899 --> 00:06:15,922
Interface fa0/0.91. Do show run interface
fa0/0.91, ip vrf forwarding B.

53
00:06:15,923 --> 00:06:21,572
Of course. See, now I just
messed up - vrf forwarding B.

54
00:06:21,574 --> 00:06:27,016
At least it yells at you because it
realizes that that's an IPv6-enabled VRF.

55
00:06:29,791 --> 00:06:32,018
I don't know why I keep doing that twice.

56
00:06:35,055 --> 00:06:38,838
There we go, router 4.

57
00:06:54,679 --> 00:06:57,975
There we go, router 5.

58
00:07:10,484 --> 00:07:12,298
Did it again.

59
00:07:29,083 --> 00:07:30,963
That was good.

60
00:07:42,840 --> 00:07:45,512
And that was 105.

61
00:07:49,532 --> 00:07:53,764
See, that's what the startup's for.

62
00:07:53,765 --> 00:07:59,262
All right, so let's put those back on
there and everybody should be good.

63
00:08:00,480 --> 00:08:04,069
Normally if this was production
or whatever, I would go around

64
00:08:04,070 --> 00:08:08,480
start doing some ping tests, make sure
everything's working. But at this point

65
00:08:08,480 --> 00:08:11,882
I'm sort of going to go with the,
it's working unless something doesn't

66
00:08:11,884 --> 00:08:14,474
come up, and then we'll
go investigate and

67
00:08:14,486 --> 00:08:17,209
see why, in case we have
a typo or anything.

68
00:08:17,209 --> 00:08:19,177
Because there are a lot
of moving parts here.

69
00:08:19,178 --> 00:08:21,505
Everybody's human, it's
very easy to make mistakes,

70
00:08:21,507 --> 00:08:25,801
miss a piece - you always
want to verify and check.

71
00:08:25,802 --> 00:08:30,741
Let's hop back over here to router
1 and let's get our CE to PE

72
00:08:30,741 --> 00:08:39,052
routing protocol running. Now, I kept OSPF
running on switch 1, switch 2 and router 6.

73
00:08:39,054 --> 00:08:46,533
So what we need to do is we
need to say interface fa0/0.71,

74
00:08:46,533 --> 00:08:58,757
ospfv3 process 1 for ipv6 area 0.

75
00:09:05,561 --> 00:09:11,064
There you go. Neighbor comes
up, no big deal. Router 4...

76
00:09:16,259 --> 00:09:33,937
ospfv3 1, ipv4-- I don't have to say vrf
on that, just area. Area 0. Router 5...

77
00:09:37,448 --> 00:09:43,808
Should come up. Oh, I said ipv4. It's
really cool if we want to run IPv4,

78
00:09:43,809 --> 00:09:46,563
but that's not what we're
trying to do right now.

79
00:09:56,177 --> 00:09:59,008
We could support that, of
course, if we wanted to.

80
00:09:59,009 --> 00:10:04,293
If you wanted to have a customer that could
run IPv4 routes over OSPF version 3,

81
00:10:04,295 --> 00:10:07,323
I could leave that there. It's
not going to hurt anything.

82
00:10:07,324 --> 00:10:12,471
It's just a lot more infrastructure I would
have to set up for my MPLS to support that.

83
00:10:12,471 --> 00:10:28,989
And then router 5, interface
fa0/0.65, ospfv3 1 for ipv4 area 0.

84
00:10:36,233 --> 00:10:38,525
Neighborship should come up

85
00:10:44,328 --> 00:10:47,814
if 6 is running OSPF. It should be.

86
00:10:47,815 --> 00:10:50,518
And I just typed IPv4 again.

87
00:10:50,518 --> 00:10:54,044
Let's sit here and watch it all day
trying to work, and it's not going to.

88
00:10:54,046 --> 00:10:56,320
I don't know why I keep doing that.

89
00:10:56,320 --> 00:10:59,827
Here we go. That should
be a little bit better.

90
00:10:59,828 --> 00:11:10,954
There we go. Now we're running OSPF in the
VRFs. So, do show ipv6 route for vrf A.

91
00:11:10,955 --> 00:11:15,049
So there, he's learning
OSPF routes in the VRF.

92
00:11:15,049 --> 00:11:17,578
Router 4...

93
00:11:21,498 --> 00:11:24,900
is learning the routes in the VRF.

94
00:11:24,901 --> 00:11:27,674
Router 1--

95
00:11:33,664 --> 00:11:35,673
Can't do that.

96
00:11:38,542 --> 00:11:41,178
And he's learning them as well.

97
00:11:41,179 --> 00:11:47,254
So, as always, next thing
is simply redistribution.

98
00:11:47,255 --> 00:11:54,381
So, since I'm already on router
1, I say router ospfv3 1,

99
00:11:54,382 --> 00:12:04,715
address family ipv6 unicast for
vrf A. Redistribute bgp 100.

100
00:12:04,716 --> 00:12:16,494
Router bgp 100, address family ipv6
unicast for vrf A. Redistribute ospf.

101
00:12:16,495 --> 00:12:19,364
And this doesn't
actually support V3, you

102
00:12:19,376 --> 00:12:22,668
literally just have to
say ospf 1, that's fine.

103
00:12:25,378 --> 00:12:29,836
Again, if I want to support everything
coming from a potential customer,

104
00:12:29,837 --> 00:12:32,572
internal external NSSA.

105
00:12:34,616 --> 00:12:36,542
Router 4...

106
00:12:40,686 --> 00:12:43,793
no space in there.

107
00:12:43,794 --> 00:12:53,547
Address family ipv6 unicast for
vrf A. Redistribute bgp 100.

108
00:13:04,377 --> 00:13:06,744
Redistribute...

109
00:13:13,602 --> 00:13:16,932
And router 5.

110
00:13:46,131 --> 00:13:49,900
Obviously if I had any more than
about these three routers to do I'd

111
00:13:49,901 --> 00:13:54,098
put this in Notepad and just paste it in
there, which you can do either way anyway.

112
00:13:54,099 --> 00:13:56,607
It just doesn't take that long to do.

113
00:13:56,608 --> 00:14:01,068
If we've done our jobs, we should be able
to go over to router-- let's go for broke.

114
00:14:01,069 --> 00:14:03,815
Let's go all the way over
to Switch 1 and let's say,

115
00:14:03,816 --> 00:14:09,806
do show ipv6 route, and he should
have all of them. There we go.

116
00:14:09,807 --> 00:14:12,932
So they're all coming through.

117
00:14:16,572 --> 00:14:21,543
Let's say, do trace that guy.

118
00:14:24,452 --> 00:14:26,611
and there you go. It
goes to all the devices

119
00:14:26,623 --> 00:14:28,793
in the middle, right
through the MPLS cloud.

120
00:14:28,794 --> 00:14:36,558
Perfect. Now, if we go to-- and this is
why I always bring a router into it,

121
00:14:39,228 --> 00:14:44,459
because the router can
actually see the MPLS tags.

122
00:14:44,460 --> 00:14:49,534
So if I were to trace over
to say, switch 2's loopback,

123
00:14:53,014 --> 00:14:55,784
you can actually see it
go right through MPLS.

124
00:14:55,785 --> 00:15:00,986
So it goes to 5, to 3, to
4, and up to switch 2.

125
00:15:00,988 --> 00:15:05,493
Perfect. And you can see that
it's getting label 18 and 23.

126
00:15:05,494 --> 00:15:10,211
Pop label 18, deliver it
with just 23 to that router.

127
00:15:10,212 --> 00:15:18,366
If we try to go to, say, switch
1's address, different labels.

128
00:15:18,366 --> 00:15:20,929
16, because it's going
to a different next-hop,

129
00:15:20,930 --> 00:15:25,509
and again it just so happens they all
generated 23 for that first VPN label.

130
00:15:25,511 --> 00:15:29,878
Remember that that label 23 is per PE.

131
00:15:29,879 --> 00:15:34,697
So, when they started walking
the VRF routing tables,

132
00:15:34,699 --> 00:15:39,079
they started generating the same labels.
So when you see the same labels like this,

133
00:15:39,080 --> 00:15:42,865
it's just coincidence. Don't
think anything of it.

134
00:15:42,866 --> 00:15:45,765
It's just because it's from
a different PE router.

135
00:15:47,116 --> 00:15:52,845
So that takes care of customer
A, so that went pretty good.

136
00:15:52,846 --> 00:15:57,884
Let's go ahead and bring in customer B, and
let's go a little more real-world with him.

137
00:15:57,885 --> 00:16:03,245
Customer B is going to run-- I
think he's going to run BGP.

138
00:16:03,245 --> 00:16:06,673
So let's go over to switch 3, and
I don't honestly remember what

139
00:16:06,674 --> 00:16:12,295
I have set up on this guy right
now. Do show ipv6 interface brief.

140
00:16:12,296 --> 00:16:18,835
So he's got his 91 with a link-local,
and he's got the same basic setup.

141
00:16:18,836 --> 00:16:21,232
Okay, so here's what we're going
to do. We're going to say,

142
00:16:21,233 --> 00:16:25,311
router bgp, and let's see, he's switch 3,

143
00:16:25,312 --> 00:16:35,789
so generally his number is 9, so we'll make
it bgp 900. And we will say, neighbor.

144
00:16:35,790 --> 00:16:37,839
And we're going to have
to use link-locals here,

145
00:16:37,840 --> 00:16:49,819
so it's going to be fe80::1%Vlan,
should be 91, remote-AS is 100.

146
00:16:52,754 --> 00:17:04,468
Address family ipv6 unicast.
Neighbor, that guy.

147
00:17:08,147 --> 00:17:11,098
Activate. Okay.

148
00:17:11,099 --> 00:17:14,363
Let's also say network,

149
00:17:19,796 --> 00:17:24,127
that guy /, and that's his real loopback,

150
00:17:24,128 --> 00:17:29,141
so that should be a /128, and network,

151
00:17:34,993 --> 00:17:38,619
and that should be a /64.

152
00:17:38,620 --> 00:17:45,579
Do you show bgp ipv6 unicast. So
he's putting those two networks in.

153
00:17:45,580 --> 00:17:54,813
Let's go up to router 1, and let's say
address family, ipv6 unicast for vrf B,

154
00:17:54,814 --> 00:18:12,350
neighbor fe80::9%FastEthernet0/0.91
remote-AS 900.

155
00:18:16,957 --> 00:18:19,357
It yelled about that quite a few times.

156
00:18:27,438 --> 00:18:30,376
I don't think it actually came up either.

157
00:18:30,377 --> 00:18:34,501
I'll put global addresses
on these if I have to.

158
00:18:34,502 --> 00:18:39,405
Again, this code has a little bit of
an issue with this link-local-- oh.

159
00:18:39,406 --> 00:18:45,780
That's interesting. I bet it
did have a fit about that.

160
00:18:49,828 --> 00:18:52,319
It's a typo.

161
00:18:57,815 --> 00:19:00,765
That's why it's screaming
and yelling so much.

162
00:19:15,917 --> 00:19:20,049
Yelling once is one thing. Yelling three
times and then not working, is another.

163
00:19:20,050 --> 00:19:22,114
There we go, much better.

164
00:19:22,114 --> 00:19:31,102
Do show ipv6 route for vrf B, and we should
be getting those two routes from BGP.

165
00:19:31,103 --> 00:19:33,539
Perfect.

166
00:19:33,540 --> 00:19:45,822
Let's go to switch 4 and say,
router bgp 1000 - just because

167
00:19:45,823 --> 00:19:53,909
his number, so to speak, is 10 -
and address family ipv6 unicast

168
00:19:53,910 --> 00:20:09,137
neighbor fe80::5%Vlan105 remote
100. Do show ipv6 interface brief.

169
00:20:13,764 --> 00:20:17,053
You could always do the
exclude unassigned here,

170
00:20:17,054 --> 00:20:23,782
but the way it puts it on another line it
gets a little bit tricky to filter this.

171
00:20:23,783 --> 00:20:27,756
One thing you could do is you
could say something like,

172
00:20:27,757 --> 00:20:39,731
exclude unassigned, or, bracket
down, something like that.

173
00:20:39,732 --> 00:20:44,467
Incomplete command before pipe.
Do show ipv6 interface brief.

174
00:20:46,881 --> 00:20:50,187
It probably doesn't like that.

175
00:20:55,205 --> 00:20:56,402
Here we go.

176
00:20:58,640 --> 00:21:03,824
Oh. I put that in there and then I
put a brace instead of a bracket.

177
00:21:06,801 --> 00:21:10,371
Hello, Escape, normal
meaning of the bracket.

178
00:21:10,372 --> 00:21:15,090
Normal meaning of the bracket is to
create a grouping, a range, basically.

179
00:21:16,951 --> 00:21:20,820
Oh, see, now I didn't geto routes from BGP.

0:19:31.140000 --> 0:19:35.460000
 Perfect. Okay. Over to router.

0:19:35.460000 --> 0:19:44.780000
 Let's go to switch four
 and say router BGP 1000.

0:19:44.780000 --> 0:19:49.640000
 Just because his number
 so to speak is 10.

0:19:49.640000 --> 0:19:54.520000
 And address family IPV6 unicast.

0:19:54.520000 --> 0:20:00.160000
 Neighbor FE80 colon colon
 5 percent VLAN 105.

0:20:00.160000 --> 0:20:09.400000
 Remote 100. Do you show
 IPV6 interface brief?

0:20:09.400000 --> 0:20:17.080000
 You could always do like the
 exclude on assigned here.

0:20:17.080000 --> 0:20:20.700000
 But the way it puts
 it on another line.

0:20:20.700000 --> 0:20:23.800000
 It gets a little bit tricky
 to filter this.

0:20:23.800000 --> 0:20:31.200000
 Now one thing you could do is you could
 say something like exclude unassigned

0:20:31.200000 --> 0:20:37.900000
 or bracket down.

0:20:37.900000 --> 0:20:40.060000
 Something like that.

0:20:40.060000 --> 0:20:47.820000
 And complete command for private
 do show IPV6 interface brief.

0:20:47.820000 --> 0:20:50.260000
 Probably doesn't like that.

0:20:50.260000 --> 0:21:00.520000
 There we go. Oh.

0:21:00.520000 --> 0:21:04.160000
 I put that in there and then I put
 a brace instead of a bracket.

0:21:04.160000 --> 0:21:10.280000
 Hello. Normal meaning
 of the bracket.

0:21:10.280000 --> 0:21:13.280000
 Normal meaning of the bracket
 is to create a grouping.

0:21:13.280000 --> 0:21:15.480000
 A range basically.

0:21:15.480000 --> 0:21:20.020000
 So, I'll see now it didn't get
 the administrative read down.

0:21:20.020000 --> 0:21:22.900000
 See how much fun this is?

0:21:22.900000 --> 0:21:25.740000
 You know what? Let's leave
 the bracket out.

0:21:25.740000 --> 0:21:28.440000
 Let's just say unassigned or down.


0:21:28.440000 --> 0:21:31.540000
 There we go. It's
 one way to do it.

0:21:31.540000 --> 0:21:35.080000
 So, let's try to get a
 little too fancy there.

0:21:35.080000 --> 0:21:37.800000
 You see we're adding to get both lines
 though because if you look up here

0:21:37.800000 --> 0:21:40.660000
 otherwise it's on two
 different lines.

0:21:40.660000 --> 0:21:42.900000
 The unassigned and the down.

0:21:42.900000 --> 0:21:44.240000
 But see then I wasn't
 missing these.

0:21:44.240000 --> 0:21:46.720000
 You can always do like down at
 the end of the line anyway.

0:21:46.720000 --> 0:21:48.080000
 What we did is fine.

0:21:48.080000 --> 0:21:51.820000
 What we want to say anyway, all
 of that was just to say network.

0:21:51.820000 --> 0:21:57.760000
 This one. That's his
 regular loop back.

0:21:57.760000 --> 0:21:59.620000
 So, that's a slash 128.

0:21:59.620000 --> 0:22:05.240000
 And this network.

0:22:05.240000 --> 0:22:09.660000
 Which should be a slash 64.

0:22:09.660000 --> 0:22:13.240000
 Do you show BGP IPV6 unicast?

0:22:13.240000 --> 0:22:19.020000
 Good. And then router five.

0:22:19.020000 --> 0:22:23.980000
 Add just family IPV6
 unicast for VRFB.

0:22:23.980000 --> 0:22:26.960000
 Neighbor FE80 colon colon.

0:22:26.960000 --> 0:22:52.860000
 That should be 10% fast Ethernet
 00.105 remote AS1000.

0:22:52.860000 --> 0:23:04.780000
 Good. Do show IPV6 route for VRFB.


0:23:04.780000 --> 0:23:10.140000
 Coolness. Go over to switch one.

0:23:10.140000 --> 0:23:12.120000
 Sorry. Switch three.

0:23:12.120000 --> 0:23:21.620000
 Let's see. Do trace 2001 DB8 colon
 100 colon 10 colon colon 10.

0:23:21.620000 --> 0:23:25.300000
 Here we go. Right through
 the MPLS core.

0:23:25.300000 --> 0:23:28.040000
 Two AS1000 on the other side.

0:23:28.040000 --> 0:23:32.620000
 The beautiful thing about using BGP
 as your CE to PE routing protocol

0:23:32.620000 --> 0:23:36.140000
 is there's no redistribution.

0:23:36.140000 --> 0:23:40.940000
 Now, normally, of course, you would
 be doing redistribution on, in this

0:23:40.940000 --> 0:23:44.920000
 case, the CE devices, switch
 three and switch four.

0:23:44.920000 --> 0:23:51.780000
 Okay. But notice on switch three, if
 I say do show IPV6 route, all he

0:23:51.780000 --> 0:23:55.380000
 has is customer B's routes.

0:23:55.380000 --> 0:24:03.220000
 That's it. And if I go to
 customer A, switch one.

0:24:03.220000 --> 0:24:06.380000
 All he has is customer A's routes.


0:24:06.380000 --> 0:24:08.420000
 So no route leaking between them.

0:24:08.420000 --> 0:24:16.720000
 Customers separated A and B and we're
 sending IPV6 directly through MPLS.

0:24:16.720000 --> 0:24:19.520000
 Now, something to note
 about this whole thing.

0:24:19.520000 --> 0:24:20.720000
 It's really cool.

0:24:20.720000 --> 0:24:22.240000
 It's a lot of fun.

0:24:22.240000 --> 0:24:24.060000
 There are of course downsides.

0:24:24.060000 --> 0:24:27.760000
 Number one, the service provider and
 or your core has to support it.

0:24:27.760000 --> 0:24:33.600000
 Number two, unlike DMVPN that we looked
 at earlier, this requires a specific

0:24:33.600000 --> 0:24:38.140000
 protocol, MPLS, to be available
 at every location.

0:24:38.140000 --> 0:24:41.060000
 The advantage of DMVPN is
 it can run over anything.

0:24:41.060000 --> 0:24:45.020000
 It can run over to standard IP,
 you know, internet connectivity.

0:24:45.020000 --> 0:24:47.680000
 This requires MPLS underneath
 the whole thing.

0:24:47.680000 --> 0:24:51.420000
 So that can, of course, you know, become
 a little bit of an issue and

0:24:51.420000 --> 0:24:55.220000
 so on. But otherwise, that's it.

0:24:55.220000 --> 0:25:00.060000
 That's your 6VPE and
 works very well.

0:25:00.060000 --> 0:25:02.760000
 A little bit of config
 to set up there.

0:25:02.760000 --> 0:25:04.460000
 You know, a little bit of typing.

0:25:04.460000 --> 0:25:06.600000
 But otherwise, a pretty
 straightforward process.

