[&] What is the 802.1d Cost value for a FastEthernet interface? (**Select the best answer**)
- 100
- 15
- 10
- 1
- 19

[&] How many Root Ports would you normally find on the Root Bridge? (Select the best answer)
- Two
- Three or more
- One
- None

[&] Did Spanning-Tree cost values change when 802.1d was upgraded to utilize Rapid Spanning-Tree?
- Yes
- No

[&] The 802.1d Root Port of your local switch is FastEthernet0/2. If this switch were to transmit an Ethernet frame to the Root Bridge, that frame would have to traverse one FastEthernet link, two 10Mbps Ethernet links and a single Gigabit Ethernet link. What is the total 802.1d STP Cost for this local switch to reach the Root Bridge? (**Select the best answer**)
- 8
- 38
- 223
- 208
- 119

[&] Whether using 802.1d or 802.1w, on what basis is the Root Port of a switch determined? (Select the best answer)
- The port that connects to the upstream path to the Root Bridge with the least, cumulative cost
- The port that connects to the upstream path to the Root Bridge with the greatest, cumulative cost
- The port on the switch with the least load is always the Root Port
- The port on the switch with the greatest bandwidth is always the Root Port