WEBVTT

0:00:02.840000 --> 0:00:07.260000
 Hello and welcome to this video titled
 the need for and components of

0:00:07.260000 --> 0:00:09.760000
 wireless land security.

0:00:09.760000 --> 0:00:12.920000
 In this video I have four major
 topics I'd like to go over.

0:00:12.920000 --> 0:00:17.440000
 I'll start by explaining why we need
 wireless land security, where the

0:00:17.440000 --> 0:00:22.480000
 differences between secured and unsecured
 wireless lands, what expectations

0:00:22.480000 --> 0:00:31.620000
 do various people have when they
 have wireless land security.

0:00:31.620000 --> 0:00:35.600000
 So let's start out with answering the
 question of why, why do we need

0:00:35.600000 --> 0:00:37.020000
 wireless land security?

0:00:37.020000 --> 0:00:41.760000
 Well to answer that it really helps to
 compare and contrast wireless lands

0:00:41.760000 --> 0:00:43.420000
 with wired lands.

0:00:43.420000 --> 0:00:47.460000
 The two are not the same and fundamentally
 they have very different security

0:00:47.460000 --> 0:00:52.000000
 needs. So let's start by looking
 at wired lands as an example.

0:00:52.000000 --> 0:00:56.700000
 Now in a wired land each host is connected
 to a unique switch port.

0:00:56.700000 --> 0:01:01.500000
 So if we think that if we imagine for
 example that this right here is

0:01:01.500000 --> 0:01:08.160000
 a physical ethernet switch connected
 to three hosts, A, B and C and those

0:01:08.160000 --> 0:01:13.840000
 hosts might be laptops, servers,
 MacBooks, maybe even IP phones.

0:01:13.840000 --> 0:01:17.640000
 But in this particular case in today's
 world we don't really use hubs

0:01:17.640000 --> 0:01:22.340000
 anymore. Individual hosts are wired
 directly to a switch port.

0:01:22.340000 --> 0:01:27.920000
 So on this cable right here the only
 devices on that cable are host A

0:01:27.920000 --> 0:01:31.420000
 and the switch at the other
 end of that cable.

0:01:31.420000 --> 0:01:33.980000
 Alright so let's keep going.

0:01:33.980000 --> 0:01:41.920000
 Host within the same VLAN, now it's
 important within the same VLAN, have

0:01:41.920000 --> 0:01:45.180000
 no visibility to each other's
 unicast traffic.

0:01:45.180000 --> 0:01:48.520000
 Now we know that if you're on a VLAN yes
 you will see each other's broadcast

0:01:48.520000 --> 0:01:51.020000
 traffic. But what about
 unicast traffic?

0:01:51.020000 --> 0:01:56.060000
 So for example when host A is sending
 a unicast ethernet frame directly

0:01:56.060000 --> 0:02:02.120000
 to host B's MAC address, only host
 A and host B will see that.

0:02:02.120000 --> 0:02:06.860000
 Because of the way that the switch forwards
 frames host C on the top there

0:02:06.860000 --> 0:02:09.580000
 will never have visibility
 to that ethernet frame.

0:02:09.580000 --> 0:02:13.100000
 So he can be sniffing all day long with
 Wireshark or whatever packet capture

0:02:13.100000 --> 0:02:16.500000
 program he wants and he will have no
 visibility to that communication

0:02:16.500000 --> 0:02:19.200000
 between A and B.

0:02:19.200000 --> 0:02:22.580000
 That's just the nature of
 wired ethernet switching.

0:02:22.580000 --> 0:02:30.200000
 Also devices are physically not connected
 to that switch have no networking

0:02:30.200000 --> 0:02:37.480000
 capability. In other words if I have another
 host, maybe right here, here's

0:02:37.480000 --> 0:02:40.500000
 host D and host D isn't even
 cable to the switch yet.

0:02:40.500000 --> 0:02:45.760000
 He has no wire. Well then he clearly can't
 sniff or see any of the information

0:02:45.760000 --> 0:02:49.480000
 going between A, B and C because he's
 not even connected to the network

0:02:49.480000 --> 0:02:54.380000
 at all. As far as the network concerns
 he doesn't even exist.

0:02:54.380000 --> 0:02:56.160000
 So that's our review
 of wired networking.

0:02:56.160000 --> 0:03:00.460000
 Now when you think of wireless it's
 a whole different ball game.

0:03:00.460000 --> 0:03:06.180000
 In a wireless LAN all hosts
 share the same medium.

0:03:06.180000 --> 0:03:09.680000
 So a common characteristic of wireless
 whether you're talking about older

0:03:09.680000 --> 0:03:15.260000
 wireless standards like 802.11a or G
 or B or the newer wireless standards

0:03:15.260000 --> 0:03:19.740000
 like 802.11ac or AD
 or AX coming out.

0:03:19.740000 --> 0:03:21.480000
 They all share one
 thing in common.

0:03:21.480000 --> 0:03:27.140000
 If I have five hosts or 50 hosts all
 connected to the same wireless LAN

0:03:27.140000 --> 0:03:32.000000
 that my access point is advertising they're
 all sharing the same airspace.

0:03:32.000000 --> 0:03:36.660000
 So when my laptop starts communicating
 on that wireless LAN there's nothing

0:03:36.660000 --> 0:03:41.820000
 I can do to prevent anything else within
 range of hearing that radio frequency

0:03:41.820000 --> 0:03:44.340000
 hearing my communication.

0:03:44.340000 --> 0:03:47.700000
 It's not like I'm directly connected
 to a wire that nobody else is on.

0:03:47.700000 --> 0:03:49.660000
 Everybody's going to hear
 that radio frequency.

0:03:49.660000 --> 0:03:50.960000
 I can't stop it.

0:03:50.960000 --> 0:03:54.640000
 I can't limit it from propagating out
 beyond my antenna once my antenna

0:03:54.640000 --> 0:03:58.780000
 starts radiating that
 energy into the air.

0:03:58.780000 --> 0:04:03.720000
 Another difference hosts connected to
 a wireless LAN can see each other's

0:04:03.720000 --> 0:04:06.380000
 frames. They see all of
 each other's frames.

0:04:06.380000 --> 0:04:08.420000
 It's not like a wired LAN.

0:04:08.420000 --> 0:04:13.940000
 Right in a wired LAN the only frames
 I'm going to see if I have wire shark

0:04:13.940000 --> 0:04:17.380000
 or some other sniffer program turned
 on and I'm capturing everything I

0:04:17.380000 --> 0:04:20.780000
 see on my wire connected
 to that switch.

0:04:20.780000 --> 0:04:25.080000
 The only thing I'm going to see that
 does not belong to me are multicasts

0:04:25.080000 --> 0:04:29.940000
 and broadcasts. Unicasts if they don't
 belong to me I'm not going to see

0:04:29.940000 --> 0:04:33.540000
 them. Well in a wireless LAN because
 everything goes into the radio waves

0:04:33.540000 --> 0:04:35.160000
 you're going to see everything.

0:04:35.160000 --> 0:04:39.240000
 Broadcast, multicast, unicast, data
 frames, management frames, control

0:04:39.240000 --> 0:04:44.460000
 frames, everybody sees everything.


0:04:44.460000 --> 0:04:47.420000
 And so here's the and here
 is also another point.

0:04:47.420000 --> 0:04:52.060000
 In the wired LAN if I had a PC or laptop
 that wasn't physically connected

0:04:52.060000 --> 0:04:56.360000
 to my switch, didn't have a cable going
 to that switch there was no way

0:04:56.360000 --> 0:05:00.640000
 he was going to see any of the data
 going through that switch makes kind

0:05:00.640000 --> 0:05:01.360000
 of common sense.

0:05:01.360000 --> 0:05:03.380000
 He didn't have a physical
 connectivity to it.

0:05:03.380000 --> 0:05:08.540000
 Well in a wireless LAN as long as a device
 has an antenna and has an ability

0:05:08.540000 --> 0:05:13.020000
 to be within range of a certain frequency
 spectrum it can hear what's

0:05:13.020000 --> 0:05:14.540000
 going on in the wireless LAN.

0:05:14.540000 --> 0:05:18.940000
 In other words I could have a laptop
 that's not even connected to the

0:05:18.940000 --> 0:05:23.800000
 access point. I'm not even associated
 to the SSID but if I'm within range

0:05:23.800000 --> 0:05:29.360000
 of hearing the radio frequencies are
 being used on that SSID I can sniff

0:05:29.360000 --> 0:05:34.140000
 that traffic. I can see it very
 different than a wired LAN.

0:05:34.140000 --> 0:05:35.820000
 Okay so now let's move on.

0:05:35.820000 --> 0:05:39.880000
 So wired LANs fall into two sort
 of very high level categories.

0:05:39.880000 --> 0:05:42.800000
 Secured and unsecured.

0:05:42.800000 --> 0:05:47.680000
 Now when I say secured that doesn't necessarily
 mean that it has encryption

0:05:47.680000 --> 0:05:51.540000
 on it. Actually no, secured
 does mean encryption.

0:05:51.540000 --> 0:05:53.600000
 So let's talk about what the differences
 are between those.

0:05:53.600000 --> 0:05:56.860000
 Let's start with unsecured
 wireless LANs.

0:05:56.860000 --> 0:06:03.720000
 These are what we typically
 call open wireless LANs.

0:06:03.720000 --> 0:06:09.100000
 So this would be unsecured
 no password free to use.

0:06:09.100000 --> 0:06:12.660000
 So this might be found in for example
 a public place like an airport or

0:06:12.660000 --> 0:06:14.580000
 a restaurant or a coffee shop.

0:06:14.580000 --> 0:06:18.800000
 So an unsecured wireless LAN is something
 that you don't necessarily have

0:06:18.800000 --> 0:06:19.860000
 to have a password for.

0:06:19.860000 --> 0:06:23.100000
 Now you're probably not going to
 find too many of those around.

0:06:23.100000 --> 0:06:27.660000
 Most wireless LANs these days at an
 absolute minimum have some kind of

0:06:27.660000 --> 0:06:31.500000
 authentication where somewhere posted
 on a whiteboard or on a wall or

0:06:31.500000 --> 0:06:35.060000
 something they'll tell you what the
 passphrase is for that wireless LAN

0:06:35.060000 --> 0:06:36.620000
 so you can get on.

0:06:36.620000 --> 0:06:40.340000
 But just because you're given a passphrase
 don't let that trick you into

0:06:40.340000 --> 0:06:44.080000
 thinking that your data is secured and
 that people won't be able to see

0:06:44.080000 --> 0:06:47.020000
 what you're sending that's
 not necessarily the case.

0:06:47.020000 --> 0:06:52.560000
 Now a secured wireless LAN number one
 it may or may not advertise their

0:06:52.560000 --> 0:06:54.480000
 presence. What does that mean?

0:06:54.480000 --> 0:06:58.800000
 Well what access points do so we're
 talking about a typical wireless LAN

0:06:58.800000 --> 0:07:01.500000
 that uses a central point of an access
 point that everybody's connected

0:07:01.500000 --> 0:07:06.680000
 to. Access points send out special
 management frames called beacons.

0:07:06.680000 --> 0:07:10.840000
 They're sent out pretty frequently
 every 100 milliseconds so 10 times

0:07:10.840000 --> 0:07:14.980000
 per second an access point
 is sending out a beacon.

0:07:14.980000 --> 0:07:17.820000
 And in that beacon there's a lot of
 fields in that beacons for example

0:07:17.820000 --> 0:07:24.240000
 what signal strength he supports what
 frequency he supports a lot of stuff.

0:07:24.240000 --> 0:07:28.380000
 Now there's also a field in there that
 indicates what the name or what

0:07:28.380000 --> 0:07:31.940000
 we call the SSID is of
 that wireless LAN.

0:07:31.940000 --> 0:07:35.460000
 Now when the network administrator was
 first configuring that access point

0:07:35.460000 --> 0:07:39.820000
 and configuring that wireless LAN they
 gave it a name every wireless LAN

0:07:39.820000 --> 0:07:44.320000
 has to have an SSID that's a descriptive
 name but when you configure that

0:07:44.320000 --> 0:07:47.920000
 descriptive name as part of the configuration
 process you have a choice

0:07:47.920000 --> 0:07:51.700000
 is usually a checkbox or a pull down
 menu or something that gives you

0:07:51.700000 --> 0:07:56.280000
 as a network administrator the ability
 to either advertise or not advertise

0:07:56.280000 --> 0:08:01.620000
 that SSID. So if you say yes I want
 to advertise that SSID that means

0:08:01.620000 --> 0:08:05.620000
 within that beacon frame that's going
 out 10 times a second your SSID's

0:08:05.620000 --> 0:08:09.780000
 name will be right there and then when
 someone goes and looks at the available

0:08:09.780000 --> 0:08:13.540000
 wireless LANs on their laptop or their
 tablet they'll see the name of

0:08:13.540000 --> 0:08:17.120000
 your wireless LAN as long as they're
 within range of hearing that beacon

0:08:17.120000 --> 0:08:21.500000
 but alternatively sometimes for security
 purposes people say you know

0:08:21.500000 --> 0:08:26.520000
 what I only want my employees to be
 aware of this wireless LAN I'll tell

0:08:26.520000 --> 0:08:29.980000
 them what the name is so they can manually
 type it into their laptop or

0:08:29.980000 --> 0:08:33.840000
 something but if someone's just scanning
 and seeing what wireless LANs

0:08:33.840000 --> 0:08:38.060000
 are available I don't want them to see
 my SSID I can't stop them necessarily

0:08:38.060000 --> 0:08:42.880000
 from getting my beacon but I don't
 want the SSID being inside of that

0:08:42.880000 --> 0:08:45.760000
 beacon and that is an option when you
 create a wireless LAN and a controller

0:08:45.760000 --> 0:08:50.380000
 and access point you could deselect
 the box for broadcasting the SSID

0:08:50.380000 --> 0:08:54.000000
 which means the beacons will still go
 out but the name of your wireless

0:08:54.000000 --> 0:08:57.560000
 LAN will not be in there so for somebody
 to connect to that wireless LAN

0:08:57.560000 --> 0:09:02.220000
 they'd already have to know
 what the name is in advance.

0:09:02.220000 --> 0:09:07.440000
 Secured wireless LANs will always have
 some form of authentication it

0:09:07.440000 --> 0:09:10.680000
 could be something as simple as a real
 simple passphrase it could be something

0:09:10.680000 --> 0:09:14.400000
 as much more complex as an exchange
 of digital certificates or something

0:09:14.400000 --> 0:09:20.040000
 like that and secured wireless LANs
 by the very nature will encrypt your

0:09:20.040000 --> 0:09:25.980000
 data between the Wi-Fi client which is
 your laptop your pc and the access

0:09:25.980000 --> 0:09:29.580000
 point and this is also a very important
 point sometimes people who are

0:09:29.580000 --> 0:09:33.220000
 new to Wi-Fi they think oh I'm connecting
 to a secured wireless LAN which

0:09:33.220000 --> 0:09:38.220000
 means that my data is encrypted starting
 at my client my laptop all the

0:09:38.220000 --> 0:09:41.380000
 way to its destination wherever that
 destination might be might be some

0:09:41.380000 --> 0:09:45.700000
 server owned by google or something that's
 three thousand miles away well

0:09:45.700000 --> 0:09:51.260000
 Wi-Fi security does not provide end-to
-end encryption like that when we're

0:09:51.260000 --> 0:09:54.860000
 talking about encryption in the world
 of Wi-Fi it's simply between your

0:09:54.860000 --> 0:09:59.600000
 client and the access point once the
 access point gets your Wi-Fi frames

0:09:59.600000 --> 0:10:05.200000
 and converts them into wired frames
 it decrypts it and outputs your data

0:10:05.200000 --> 0:10:09.760000
 and plaintext into the wired frame as
 it sends it out onto the distribution

0:10:09.760000 --> 0:10:13.800000
 system the distribution system is the
 name of the wired network that's

0:10:13.800000 --> 0:10:20.440000
 sitting behind the access point and secured
 wireless LANs obvuskate there's

0:10:20.440000 --> 0:10:24.500000
 a big word for you obvuskate visibility
 of your data that simply means

0:10:24.500000 --> 0:10:28.180000
 that your data is encrypted so if someone's
 sniffing it and we can't really

0:10:28.180000 --> 0:10:31.100000
 stop them from sniffing it if they if
 they're within range of the radio

0:10:31.100000 --> 0:10:34.220000
 frequency they won't be able to tell
 what you're doing the data will look

0:10:34.220000 --> 0:10:39.860000
 like it's garbled to them all right so
 when we think of wireless LAN security

0:10:39.860000 --> 0:10:45.100000
 the the goals or objectives behind wireless
 LAN security are very different

0:10:45.100000 --> 0:10:51.460000
 depending on whose perspective it is
 so if we're talking about the network

0:10:51.460000 --> 0:10:55.580000
 administrator the network administrator
 has very different needs for Wi

0:10:55.580000 --> 0:11:01.040000
-Fi security than just a typical user
 who's connecting to it so they can

0:11:01.040000 --> 0:11:04.280000
 get internet access for example what are
 some of the things that the network

0:11:04.280000 --> 0:11:07.940000
 administrator is thinking about when
 they're thinking about hmm should

0:11:07.940000 --> 0:11:12.220000
 i implement security what feature should
 i use where should i do it well

0:11:12.220000 --> 0:11:15.020000
 these are some of the common things
 that the network administrator would

0:11:15.020000 --> 0:11:20.340000
 think about they only want authorized
 people onto the wireless LAN maybe

0:11:20.340000 --> 0:11:24.680000
 just their employees should have access
 to it they only want to provide

0:11:24.680000 --> 0:11:28.640000
 authorized resources via the wireless
 LAN maybe if you connect to this

0:11:28.640000 --> 0:11:32.020000
 wireless LAN over here you're only authorized
 to go to maybe these handful

0:11:32.020000 --> 0:11:36.520000
 of servers and you're not allowed to
 get to some other resources on the

0:11:36.520000 --> 0:11:41.800000
 wired network maybe the network administrator
 wants to restrict the quantity

0:11:41.800000 --> 0:11:45.880000
 of wireless LAN clients especially if
 you're talking about something like

0:11:45.880000 --> 0:11:50.400000
 a stadium or a coliseum that might
 have tens of thousands of people in

0:11:50.400000 --> 0:11:54.240000
 it and hundreds of access points maybe
 even thousands of access points

0:11:54.240000 --> 0:11:59.540000
 circling that coliseum one of the design
 ideas is we don't want any particular

0:11:59.540000 --> 0:12:04.240000
 access point becoming overloaded with
 clients because remember everybody

0:12:04.240000 --> 0:12:08.820000
 is sharing the same airspace if i just
 have two clients connected to an

0:12:08.820000 --> 0:12:12.340000
 access point those two clients can
 go pretty fast they can get pretty

0:12:12.340000 --> 0:12:15.020000
 fast bandwidth because they're not really
 contending with each other that

0:12:15.020000 --> 0:12:19.520000
 often now that same access point is
 supporting 100 clients within its

0:12:19.520000 --> 0:12:23.260000
 circle of influence now everybody's going
 to be going pretty slow because

0:12:23.260000 --> 0:12:26.300000
 they're going to be fighting over each
 other so part of Wi-Fi security

0:12:26.300000 --> 0:12:30.620000
 is maybe putting a cap or an upper limit
 on the maximum quantity of people

0:12:30.620000 --> 0:12:35.800000
 that can associate with that access
 point also the network administrator

0:12:35.800000 --> 0:12:39.180000
 might want to implement some sort of
 feature to be able to detect rogue

0:12:39.180000 --> 0:12:43.240000
 access points a rogue access point is
 an access point that has been put

0:12:43.240000 --> 0:12:48.000000
 into place and yet it's not controlled
 by the company some employee brought

0:12:48.000000 --> 0:12:51.420000
 it in in their backpack somebody walked
 into the coffee shop and set up

0:12:51.420000 --> 0:12:54.740000
 their own access point but it's an access
 point that is not an authorized

0:12:54.740000 --> 0:12:59.600000
 controlled access point we call that
 a rogue access point now what about

0:12:59.600000 --> 0:13:02.920000
 you you're the network user you're going
 to the coffee shop you're going

0:13:02.920000 --> 0:13:07.360000
 to uh your your company's headquarters
 what are you typically concerned

0:13:07.360000 --> 0:13:11.200000
 with if you even bother to think about
 wireless land security at all well

0:13:11.200000 --> 0:13:14.220000
 you're probably not considering all the
 stuff that the network administrators

0:13:14.220000 --> 0:13:18.240000
 considering the stuff that's on the
 top of your mind is you want your

0:13:18.240000 --> 0:13:22.700000
 data safe you want it encrypted that's
 probably about it that's probably

0:13:22.700000 --> 0:13:24.980000
 really the only main thing you think
 about when you think about wireless

0:13:24.980000 --> 0:13:29.560000
 land security is hey i can't stop people
 from seeing my radio energy and

0:13:29.560000 --> 0:13:35.140000
 my frames but i do want to make sure
 they can't interpret or read what

0:13:35.140000 --> 0:13:40.900000
 they're looking at so that's your primary
 concern now when we talk about

0:13:40.900000 --> 0:13:45.400000
 wireless land security there are three
 primary components to it that we

0:13:45.400000 --> 0:13:51.240000
 need to take a look at number one wireless
 land security is composed of

0:13:51.240000 --> 0:13:55.000000
 authentication so there's going to be some
 form of authentication in wireless

0:13:55.000000 --> 0:14:00.260000
 land security and there's multiple ways
 that you can accomplish that data

0:14:00.260000 --> 0:14:04.320000
 confidentiality as your data is going
 across you want to be confidential

0:14:04.320000 --> 0:14:07.980000
 in other words we can't stop people
 from seeing it we don't want them

0:14:07.980000 --> 0:14:12.000000
 to be able to understand it that's typically
 implemented via encryption

0:14:12.000000 --> 0:14:19.560000
 and data integrity data integrity simply
 means that hey if i get a Wi

0:14:19.560000 --> 0:14:25.520000
-Fi frame from the access point what
 assurances do i have that this frame

0:14:25.520000 --> 0:14:30.420000
 wasn't modified in transit that the
 data wasn't changed in transit now

0:14:30.420000 --> 0:14:33.840000
 you might think well wait a second for
 drama wireless how was that even

0:14:33.840000 --> 0:14:39.360000
 possible well when you receive a Wi-Fi
 frame you might think you're getting

0:14:39.360000 --> 0:14:43.260000
 it from the access point but there are
 certain circumstances where people

0:14:43.260000 --> 0:14:47.820000
 can put rogue access points in place
 that nobody knows about and they

0:14:47.820000 --> 0:14:52.800000
 can trick you into connecting to their
 rogue access point you think you're

0:14:52.800000 --> 0:14:56.320000
 connecting to the corporate access
 point in reality you're talking to

0:14:56.320000 --> 0:15:00.580000
 the rogue and then the rogue access
 point in turn connects to the real

0:15:00.580000 --> 0:15:04.980000
 access point so when data comes down
 from the wired network hits the real

0:15:04.980000 --> 0:15:08.960000
 access point goes to the rogue access
 point so the rogue access point

0:15:08.960000 --> 0:15:13.580000
 is just a client of the real authorized
 access point and now that rogue

0:15:13.580000 --> 0:15:17.000000
 access point has the ability to capture
 that data and maybe make some

0:15:17.000000 --> 0:15:21.800000
 changes to it before it replays it
 back to you and you're connected to

0:15:21.800000 --> 0:15:25.620000
 that rogue so how can we detect that that's
 called data integrity detecting

0:15:25.620000 --> 0:15:31.900000
 if something has been changed from when
 the frame was originally created

0:15:31.900000 --> 0:15:36.440000
 now typically all of those things authentication
 data confidentiality

0:15:36.440000 --> 0:15:41.300000
 and data integrity are accomplished
 and implemented after you've already

0:15:41.300000 --> 0:15:49.620000
 associated to your wireless LAN to
 your SSID authentication can occur

0:15:49.620000 --> 0:15:59.600000
 independently so there are wireless
 LANs out there for example but this

0:15:59.600000 --> 0:16:02.200000
 you're not really going to be encrypting
 anything that Wi-Fi password

0:16:02.200000 --> 0:16:06.500000
 just so you can get on to their wireless
 LAN but once you're on it and

0:16:06.500000 --> 0:16:10.640000
 the wireless LAN knows who you are it's
 not necessarily encrypting anything

0:16:10.640000 --> 0:16:14.400000
 so you could have a wireless LAN that's
 got the authentication piece but

0:16:14.400000 --> 0:16:19.380000
 doesn't have the data confidentiality
 and integrity piece and in public

0:16:19.380000 --> 0:16:26.580000
 Wi-Fi's most of the time that is the
 case now for wireless LAN does have

0:16:26.580000 --> 0:16:32.640000
 encryption encryption and data integrity
 they do go together okay so wireless

0:16:32.640000 --> 0:16:39.600000
 LAN protocols like WPA2 with CCMP those
 encryption protocols are rolled

0:16:39.600000 --> 0:16:45.220000
 into data integrity they go hand in
 hand so that concludes this video

