WEBVTT

0:00:02.980000 --> 0:00:08.000000
 Hello and welcome to this video that I've
 titled Radio Frequency Propagation.

0:00:08.000000 --> 0:00:11.860000
 The main focus of this video is to
 talk about the various things that

0:00:11.860000 --> 0:00:17.180000
 could affect a radio frequency signal
 and degrade it, change it, or just

0:00:17.180000 --> 0:00:18.980000
 completely block it.

0:00:18.980000 --> 0:00:22.420000
 And so we're going to go over terms
 as we see here from absorption all

0:00:22.420000 --> 0:00:27.920000
 the way down to multipath.

0:00:27.920000 --> 0:00:33.180000
 So as radio frequency propagates or transmits
 away from the receiver there

0:00:33.180000 --> 0:00:38.120000
 are several situations which could
 cause it to severely attenuate, be

0:00:38.120000 --> 0:00:43.840000
 completely blocked, or be even reflected
 to a different direction.

0:00:43.840000 --> 0:00:51.880000
 So you might recall that if this right
 here represents a cable and you're

0:00:51.880000 --> 0:00:54.540000
 looking at the cable.

0:00:54.540000 --> 0:00:58.260000
 So electrons are moving back and forth
 through this copper wire, you're

0:00:58.260000 --> 0:01:00.400000
 looking at the outside of it.

0:01:00.400000 --> 0:01:05.180000
 You might recall that radio waves are
 propagated 90 degrees away from

0:01:05.180000 --> 0:01:10.200000
 that cable. So they're going out like
 this in all directions away from

0:01:10.200000 --> 0:01:13.520000
 that cable. That's where the electromagnetic
 radiation is going.

0:01:13.520000 --> 0:01:20.540000
 And as it keeps going and going and
 going, it's like waves and a pond.

0:01:20.540000 --> 0:01:24.940000
 Now your antenna might
 be right here.

0:01:24.940000 --> 0:01:27.560000
 It's on your laptop.

0:01:27.560000 --> 0:01:31.840000
 Oops, forget my terrible spelling,
 but that's your laptop right there.

0:01:31.840000 --> 0:01:36.620000
 Now in order for you to pick up that
 Wi-Fi signal, number one, it has

0:01:36.620000 --> 0:01:42.180000
 to reach you. So we're going to talk
 about in this video that there are

0:01:42.180000 --> 0:01:52.720000
 some cases where that Wi-Fi signal might
 reach you, but it might be severely

0:01:52.720000 --> 0:01:56.900000
 degraded to the point where you can't
 even tell what originally was.

0:01:56.900000 --> 0:02:02.320000
 Or in some cases, that Wi-Fi signal
 could be reflected by things and it

0:02:02.320000 --> 0:02:05.200000
 could come in this
 direction as well.

0:02:05.200000 --> 0:02:07.640000
 Or maybe this direction as well.

0:02:07.640000 --> 0:02:10.260000
 And so your antenna might
 think, what is going on?

0:02:10.260000 --> 0:02:14.600000
 I'm getting radio frequencies
 from all different directions.

0:02:14.600000 --> 0:02:16.340000
 Some of them are canceling
 each other out.

0:02:16.340000 --> 0:02:18.580000
 Some of them are making
 each other stronger.

0:02:18.580000 --> 0:02:21.700000
 How do I interpret this
 into ones and zeros?

0:02:21.700000 --> 0:02:24.660000
 So that's what we're talking about here
 as far as propagation problems,

0:02:24.660000 --> 0:02:28.520000
 things that could affect the Wi-Fi signal
 so that by the time it reaches

0:02:28.520000 --> 0:02:33.640000
 the receiver, the receiver might have
 some problems understanding it.

0:02:33.640000 --> 0:02:40.460000
 So let's talk about our first and probably
 worst problem, which is absorption.

0:02:40.460000 --> 0:02:46.520000
 Absorption is the characteristic of
 a material to absorb the RF energy.

0:02:46.520000 --> 0:02:50.560000
 And by absorbing it, I mean it might
 completely absorb it to where when

0:02:50.560000 --> 0:02:54.560000
 the RF energy hits this material, it
 doesn't come out on the other side.

0:02:54.560000 --> 0:02:56.520000
 That energy, sort of
 like a sponge, right?

0:02:56.520000 --> 0:03:00.360000
 If I have a little puddle of water on
 the top of my oven and I put a sponge

0:03:00.360000 --> 0:03:03.660000
 on top of it, it completely
 soaks up that water.

0:03:03.660000 --> 0:03:06.020000
 So when I lift the sponge
 away, the water is gone.

0:03:06.020000 --> 0:03:10.400000
 So similar, there's some materials out
 there that might radio frequency

0:03:10.400000 --> 0:03:15.440000
 energy hits that material, it completely
 absorbs it and nothing pops through

0:03:15.440000 --> 0:03:17.280000
 on the other side.

0:03:17.280000 --> 0:03:23.220000
 Or there's some other material that
 might partially absorb the energy.

0:03:23.220000 --> 0:03:26.640000
 Maybe the RF energy goes through, but
 once it comes out the other side,

0:03:26.640000 --> 0:03:28.180000
 it's a lot weaker.

0:03:28.180000 --> 0:03:29.880000
 We call that attenuation.

0:03:29.880000 --> 0:03:32.040000
 The radio frequency
 has been attenuated.

0:03:32.040000 --> 0:03:36.260000
 It's a lot weaker coming out than
 when it first hit that material.

0:03:36.260000 --> 0:03:43.200000
 And so we can see here some examples
 of this are rock and stone, water,

0:03:43.200000 --> 0:03:46.740000
 drywall, even the human body.

0:03:46.740000 --> 0:03:52.060000
 So we can see here a chart that gives
 some examples of this in absorption

0:03:52.060000 --> 0:03:56.720000
 rates. Now the way that you would interpret
 this chart is that the higher

0:03:56.720000 --> 0:04:02.860000
 the number, the higher the decibel rate,
 the more the absorption of that

0:04:02.860000 --> 0:04:09.000000
 material. So for example, compare a
 plaster or drywall wall, which has

0:04:09.000000 --> 0:04:14.440000
 a three to five decibel absorption rate
 with a concrete wall, which could

0:04:14.440000 --> 0:04:18.560000
 have up to a 15 decibel
 absorption rate.

0:04:18.560000 --> 0:04:24.900000
 Now without going too far into the physics
 of this here, this is not linear.

0:04:24.900000 --> 0:04:28.660000
 In other words, a loss
 of one decibel.

0:04:28.660000 --> 0:04:34.680000
 So a loss of one decibel in power means
 that you've lost 20% of the original

0:04:34.680000 --> 0:04:41.240000
 RF energy. So if I have a radio frequency
 transmitter that's right here,

0:04:41.240000 --> 0:04:45.320000
 something in the middle that's absorbing
 some of that energy, and here's

0:04:45.320000 --> 0:04:49.560000
 the receiver on the other side, and
 the amount of energy is one decibel

0:04:49.560000 --> 0:04:51.720000
 less than what was originally
 transmitted.

0:04:51.720000 --> 0:04:56.940000
 That means that receiver is receiving
 only 80%, 20% of it's been lost

0:04:56.940000 --> 0:04:59.860000
 with just a one decibel
 level loss.

0:04:59.860000 --> 0:05:03.520000
 Now if we just go up to a three decibel
 level loss, that might not sound

0:05:03.520000 --> 0:05:07.560000
 a lot like a difference of one dB to a
 three dB, but we're actually talking

0:05:07.560000 --> 0:05:12.320000
 about a 75% loss in power
 if it's a three dB.

0:05:12.320000 --> 0:05:17.060000
 So we can see here, looking at this
 chart, that something going through

0:05:17.060000 --> 0:05:29.240000
 drywall, which might have a 15 decibel
 loss, that is a significant loss

0:05:29.240000 --> 0:05:32.700000
 in power. That means that the signal
 that went through the concrete wall

0:05:32.700000 --> 0:05:38.080000
 by the time it reaches you is a tiny,
 tiny fraction, like maybe a thousandth

0:05:38.080000 --> 0:05:42.260000
 of the power that if that same signal
 had gone through drywall.

0:05:42.260000 --> 0:05:44.540000
 So that's what we call absorption.


0:05:44.540000 --> 0:05:48.000000
 And certainly there are definitely things
 in your environment which can

0:05:48.000000 --> 0:05:50.780000
 absorb your radio frequency.

0:05:50.780000 --> 0:05:51.680000
 What's another thing that's going to
 be a little bit more important than

0:05:51.680000 --> 0:05:53.820000
 the other issue that you
 could come up with?

0:05:53.820000 --> 0:05:58.680000
 Well, in the world of RF, you can
 have reflection and refraction.

0:05:58.680000 --> 0:06:03.000000
 So reflection like it sounds is a material
 that actually reflects the

0:06:03.000000 --> 0:06:08.580000
 RF energy into a different direction
 or even back to the source.

0:06:08.580000 --> 0:06:13.140000
 So in this case, the RF energy is not
 absorbed into the material, it is

0:06:13.140000 --> 0:06:14.680000
 reflected off of it.

0:06:14.680000 --> 0:06:18.800000
 For example, metal, even bodies
 of water can do this.

0:06:18.800000 --> 0:06:26.120000
 So to draw an analogy of this, if this
 is my access point and here's his

0:06:26.120000 --> 0:06:30.760000
 radio, I should say here's his antenna,
 and the RF energy is going in

0:06:30.760000 --> 0:06:36.440000
 this direction, and over
 here is my receiver.

0:06:36.440000 --> 0:06:39.360000
 Here's the antenna that's
 trying to pick that up.

0:06:39.360000 --> 0:06:44.920000
 But right here is some sort
 of metal that's at an angle.

0:06:44.920000 --> 0:06:51.360000
 Well, when that RF energy hits that,
 depending on the reflection index,

0:06:51.360000 --> 0:06:55.640000
 it could actually be reflected in this
 direction and never even make it

0:06:55.640000 --> 0:06:57.560000
 to the receiver.

0:06:57.560000 --> 0:06:59.500000
 That would certainly
 be a bad situation.

0:06:59.500000 --> 0:07:03.380000
 So that metal could cause
 that reflection to happen.

0:07:03.380000 --> 0:07:08.700000
 Another thing that could happen to an
 RF signal is what's called refraction.

0:07:08.700000 --> 0:07:16.020000
 This is where the signal is bent as it
 passes through objects of one density

0:07:16.020000 --> 0:07:20.740000
 into another. So for example, a radio
 frequency that's going through air

0:07:20.740000 --> 0:07:22.800000
 that suddenly hits glass.

0:07:22.800000 --> 0:07:27.280000
 Well, the glass is not going to stop
 it, it's not like metal that will

0:07:27.280000 --> 0:07:29.960000
 stop it and completely reflect it
 back in a different direction.

0:07:29.960000 --> 0:07:33.720000
 It will propagate into and through
 that glass, but because the density

0:07:33.720000 --> 0:07:40.280000
 is different between air and glass, the
 RF energy will actually be refracted

0:07:40.280000 --> 0:07:43.980000
 or change its direction.

0:07:43.980000 --> 0:07:47.100000
 And different materials have
 different refractive indexes.

0:07:47.100000 --> 0:07:51.860000
 Once again, to draw an example of that,
 here's my original RF energy going

0:07:51.860000 --> 0:07:53.100000
 in this direction.

0:07:53.100000 --> 0:07:56.320000
 Maybe right now it's going
 through the air.

0:07:56.320000 --> 0:08:03.000000
 All of a sudden here is a window
 in the side of a building.

0:08:03.000000 --> 0:08:06.040000
 And over here, right
 there is my receiver.

0:08:06.040000 --> 0:08:10.620000
 That's my receiver, my antenna.

0:08:10.620000 --> 0:08:14.080000
 Well, as it hits this glass and propagates
 through it, refraction means

0:08:14.080000 --> 0:08:18.020000
 as it comes out the other
 side, it's bent.

0:08:18.020000 --> 0:08:20.460000
 It's going in a slightly
 different direction now.

0:08:20.460000 --> 0:08:25.380000
 Maybe that receiver won't get it at
 all or maybe he'll just get a tiny

0:08:25.380000 --> 0:08:27.540000
 portion of that signal.

0:08:27.540000 --> 0:08:29.480000
 That's called refraction.

0:08:29.480000 --> 0:08:38.820000
 Other types of problems we could have
 are diffraction and scattering.

0:08:38.820000 --> 0:08:42.720000
 So diffraction is a weird
 physics property.

0:08:42.720000 --> 0:08:48.600000
 It's the bending and spreading of an RF signal
 when it encounters an obstruction.

0:08:48.600000 --> 0:08:52.940000
 Hills or buildings can cause this for
 Wi-Fi, which creates an RF shadow

0:08:52.940000 --> 0:08:56.780000
 on the other side of the object, which
 causes dead coverage or degraded

0:08:56.780000 --> 0:09:00.740000
 signals. An example of this.

0:09:00.740000 --> 0:09:09.580000
 Here is my RF signal going
 in this direction.

0:09:09.580000 --> 0:09:14.040000
 All of a sudden it encounters
 a building.

0:09:14.040000 --> 0:09:23.020000
 And maybe here is another building,
 a little bit less tall.

0:09:23.020000 --> 0:09:28.340000
 And my receiver is right here.

0:09:28.340000 --> 0:09:31.260000
 Here's my antenna.

0:09:31.260000 --> 0:09:40.280000
 Well, as it hits this building, it might
 go through, but my receiver is

0:09:40.280000 --> 0:09:41.920000
 not quite enough to hit it.

0:09:41.920000 --> 0:09:45.920000
 And right here is what we would
 consider a dead zone.

0:09:45.920000 --> 0:09:49.680000
 There's nothing in this
 particular section.

0:09:49.680000 --> 0:09:55.800000
 Or if you've ever seen like water, imagine
 this is water here going through

0:09:55.800000 --> 0:09:58.980000
 a pond. It's a wave of water
 going through a pond.

0:09:58.980000 --> 0:10:04.440000
 And we hit a rock or
 a stone in that pond.

0:10:04.440000 --> 0:10:07.600000
 It's kind of interesting how the wave
 looks is that you'll actually see

0:10:07.600000 --> 0:10:12.620000
 that the wave will go through
 it in some cases.

0:10:12.620000 --> 0:10:16.680000
 And the water will sort of bend around
 the rock and then keep going like

0:10:16.680000 --> 0:10:23.100000
 this. Well if we catch this, this is
 not quite as strong as if we caught

0:10:23.100000 --> 0:10:28.180000
 these. So if we're talking about Wi
-Fi here, this RF energy for catching

0:10:28.180000 --> 0:10:33.120000
 it right here at this point has been
 diffracted and it's not quite as

0:10:33.120000 --> 0:10:36.480000
 strong as if we had placed our antenna
 in a slightly different location

0:10:36.480000 --> 0:10:39.500000
 where the rock did not affect us.

0:10:39.500000 --> 0:10:41.700000
 That is diffraction.

0:10:41.700000 --> 0:10:48.260000
 And they will also
 have scattering.

0:10:48.260000 --> 0:10:51.740000
 Now scattering is the same as refraction
 but on a larger scale.

0:10:51.740000 --> 0:10:56.200000
 It's unpredictable, causes
 signal degradation.

0:10:56.200000 --> 0:11:00.880000
 This is typically caused when a lot
 of very, very small things are going

0:11:00.880000 --> 0:11:02.660000
 through the atmosphere
 or through the air.

0:11:02.660000 --> 0:11:08.380000
 For example, particles of dust, tree foliage,
 even tiny little water droplets

0:11:08.380000 --> 0:11:12.440000
 and humidity. All of that will affect
 your radio frequency as it's going

0:11:12.440000 --> 0:11:16.500000
 through the air and cause that radio frequency
 to scatter and go in different

0:11:16.500000 --> 0:11:24.900000
 directions. So it's refraction
 but on a much larger scale.

0:11:24.900000 --> 0:11:28.520000
 We also have the term of
 free space path loss.

0:11:28.520000 --> 0:11:33.100000
 Believe it or not, RF energy is lost
 simply as it travels through the

0:11:33.100000 --> 0:11:37.640000
 air. From the point where the transmit
 or transmit that RF energy as it

0:11:37.640000 --> 0:11:40.420000
 goes further and further through the
 air, maybe there's nothing physically

0:11:40.420000 --> 0:11:45.140000
 to stop it. There's no rain droplets,
 no buildings, no glass.

0:11:45.140000 --> 0:11:48.860000
 Just the fact is that it's going through
 the air, it will get weaker and

0:11:48.860000 --> 0:11:49.760000
 weaker and weaker.

0:11:49.760000 --> 0:11:52.840000
 This is called free
 space path loss.

0:11:52.840000 --> 0:11:57.620000
 Now if you are seriously into physics
 and you love math, this can actually

0:11:57.620000 --> 0:12:01.160000
 be calculated. And here is
 your calculation for this.

0:12:01.160000 --> 0:12:03.780000
 Holy mackerel. Here's
 the great thing.

0:12:03.780000 --> 0:12:07.820000
 If you're just learning about Wi-Fi,
 either because you're curious or

0:12:07.820000 --> 0:12:12.000000
 you need to pass like a low level certification,
 you don't have to memorize

0:12:12.000000 --> 0:12:14.900000
 this formula. You don't have
 to understand this formula.

0:12:14.900000 --> 0:12:18.480000
 Just know it is something that can
 be calculated by people interested

0:12:18.480000 --> 0:12:21.800000
 in becoming like a physics major
 or something like that.

0:12:21.800000 --> 0:12:26.820000
 The main takeaway here is that just because
 you say, oh, here's my transmitter,

0:12:26.820000 --> 0:12:30.160000
 here's my receiver, there's absolutely
 nothing in the middle of them.

0:12:30.160000 --> 0:12:32.440000
 This guy should get
 the full strength.

0:12:32.440000 --> 0:12:37.820000
 No he's not. Free space path loss means
 free space path loss means the

0:12:37.820000 --> 0:12:45.620000
 farther you get away
 from the will weaken.

0:12:45.620000 --> 0:12:48.560000
 And loss is relative to
 frequency and distance.

0:12:48.560000 --> 0:12:55.840000
 We can see actually here in this drawing
 here that so the higher we go

0:12:55.840000 --> 0:13:01.480000
 up, the more loss, the less powerful
 the radio frequency is.

0:13:01.480000 --> 0:13:07.240000
 And so we can see here, for example, if
 we look at this point, a 2.4 gigahertz

0:13:07.240000 --> 0:13:12.240000
 signal, yes, it will experience some
 free space path loss, but not as

0:13:12.240000 --> 0:13:15.880000
 much as a 5 gigahertz signal.

0:13:15.880000 --> 0:13:21.020000
 So the faster the frequency, the higher
 the frequency, the greater the

0:13:21.020000 --> 0:13:24.480000
 free space path loss will be.

0:13:24.480000 --> 0:13:30.660000
 And then the last topic I want to talk
 about that can also negatively

0:13:30.660000 --> 0:13:36.320000
 impact your RF signal is something
 called multipath.

0:13:36.320000 --> 0:13:41.340000
 So we know just like a wave of water,
 if you drop a rock into a standing

0:13:41.340000 --> 0:13:45.440000
 pool of water, that wave will get bigger
 and bigger and bigger as it leaves,

0:13:45.440000 --> 0:13:49.940000
 as it as the distance away from where
 you drop that rock will occur.

0:13:49.940000 --> 0:13:53.580000
 Same thing here is true of radio
 frequency, radio frequency waves.

0:13:53.580000 --> 0:13:56.960000
 They will expand from the
 point at which they left.

0:13:56.960000 --> 0:14:00.740000
 So your access point has an antenna,
 maybe the antenna is only that tiny,

0:14:00.740000 --> 0:14:06.220000
 maybe, you know, some access points,
 the antenna is only on a little chip.

0:14:06.220000 --> 0:14:09.560000
 That might be half of an inch
 long, you don't even see it.

0:14:09.560000 --> 0:14:12.900000
 So the original waveform might be that
 big, but it gets farther and farther

0:14:12.900000 --> 0:14:17.100000
 away from that transmitting antenna,
 it expands and gets larger and larger

0:14:17.100000 --> 0:14:20.620000
 and larger, like a wave
 does in a body of water.

0:14:20.620000 --> 0:14:26.180000
 Well as that radio frequency wave encounters
 things, some of those things

0:14:26.180000 --> 0:14:31.440000
 will absorb it, some of those things
 will refract it, and some of those

0:14:31.440000 --> 0:14:33.820000
 things will reflect it.

0:14:33.820000 --> 0:14:39.400000
 And so we can see here, as it encounters
 multiple objects and it's reflected,

0:14:39.400000 --> 0:14:42.860000
 multiple waveforms are created.

0:14:42.860000 --> 0:14:48.440000
 So now we've got multiple duplicate
 waveforms are created that are going

0:14:48.440000 --> 0:14:53.800000
 in different directions, taking a different
 path, and copies of all those

0:14:53.800000 --> 0:14:58.380000
 original signals will eventually reach
 the receiver, but not at the same

0:14:58.380000 --> 0:15:03.080000
 time. They will be delayed depending
 on how often they've bounced around

0:15:03.080000 --> 0:15:07.240000
 before they finally get to
 the receiving antenna.

0:15:07.240000 --> 0:15:09.800000
 Metal is a typical
 culprit of this.

0:15:09.800000 --> 0:15:16.260000
 The more metal you have it in your environment,
 metal nails in your walls,

0:15:16.260000 --> 0:15:20.220000
 metal dividing, you know, one wall
 from another metal filing cabinets,

0:15:20.220000 --> 0:15:24.540000
 the more multipath
 you'll experience.

0:15:24.540000 --> 0:15:28.860000
 So the effective multipath, depending
 on your Wi-Fi standard, as you could

0:15:28.860000 --> 0:15:33.820000
 have data corruption, the signal
 could be completely nulled out.

0:15:33.820000 --> 0:15:38.140000
 In some cases, the signal could be increased
 due to increased signal amplitude

0:15:38.140000 --> 0:15:46.000000
 or decreased. Using multiple antennas
 on the receiver can reduce the effects

0:15:46.000000 --> 0:15:48.420000
 of this. For example, take a
 look at this animation here.

0:15:48.420000 --> 0:15:53.540000
 The transmitter on the left is going
 to transmit a Wi-Fi signal, but as

0:15:53.540000 --> 0:15:57.440000
 it encounters various things like the
 filing cabinet and even the ceiling,

0:15:57.440000 --> 0:16:01.220000
 we're going to see how that creates
 multiple signals that all reach the

0:16:01.220000 --> 0:16:03.380000
 receiver at different times.

0:16:03.380000 --> 0:16:10.520000
 So there we go, that receiver just received
 multiple copies of the same

0:16:10.520000 --> 0:16:14.080000
 original signal, and this is
 what's called multipath.

0:16:14.080000 --> 0:16:18.040000
 And depending on how many antennas
 we have in the receiver, depending

0:16:18.040000 --> 0:16:22.020000
 on the logic and the code of the receiver,
 this could cause some problems

0:16:22.020000 --> 0:16:24.800000
 to where he can't decode
 it correctly.

0:16:24.800000 --> 0:16:26.680000
 This is a problem with multipath.

0:16:26.680000 --> 0:16:33.080000
 So all these things we've looked at,
 absorption, reflection, refraction,

0:16:33.080000 --> 0:16:37.020000
 diffraction, scattering and multipath,
 these are all things that could

0:16:37.020000 --> 0:16:41.180000
 affect your radio frequency, that could
 cause the receiver to either not

0:16:41.180000 --> 0:16:46.100000
 get it at all, get it a lot less, or just
 be completely confused by multiple

0:16:46.100000 --> 0:16:50.160000
 frequencies all coming in in different
 directions all at once.

0:16:50.160000 --> 0:16:52.740000
 So that concludes this video.

0:16:52.740000 --> 0:16:54.040000
 I hope you have found it useful.

