WEBVTT

0:00:05.340000 --> 0:00:08.360000
 So now we're going to look
 at how our routes selected.

0:00:08.360000 --> 0:00:15.420000
 And what I mean by that is if a router
 learns of a route to a destination,

0:00:15.420000 --> 0:00:18.460000
 either it's a connected route or a static
 router, he dynamically learned

0:00:18.460000 --> 0:00:22.500000
 it, if that route is good, if it meets
 all of our criteria, it's got a

0:00:22.500000 --> 0:00:25.440000
 next hop, it's got a subnet mask,
 all that stuff we talked about.

0:00:25.440000 --> 0:00:30.400000
 So if that is the only path he has,
 he'll put that in the routing table.

0:00:30.400000 --> 0:00:33.760000
 It's selected because he doesn't have
 anything to choose from, that's

0:00:33.760000 --> 0:00:35.200000
 the one and only one.

0:00:35.200000 --> 0:00:40.520000
 But what if he gets two or more routes
 to that same destination network?

0:00:40.520000 --> 0:00:43.620000
 I talked about earlier that he
 wants to choose the best one.

0:00:43.620000 --> 0:00:45.520000
 So how is he going to do that?

0:00:45.520000 --> 0:00:48.320000
 And that's what we're going to
 look at here in this section.

0:00:48.320000 --> 0:00:52.200000
 So the first question a router asks
 itself when a routing update or when

0:00:52.200000 --> 0:00:55.440000
 a route comes in or maybe you statically
 configure a router, maybe he's

0:00:55.440000 --> 0:00:56.580000
 directly connected.

0:00:56.580000 --> 0:01:00.020000
 Basically the router says, look, I've
 just learned of a network that I

0:01:00.020000 --> 0:01:03.880000
 already know about that's already
 in my routing table.

0:01:03.880000 --> 0:01:09.180000
 The first question he asks himself
 is, is the way I learned it, is the

0:01:09.180000 --> 0:01:13.520000
 method by which I learned it the same
 as the method I've already got it

0:01:13.520000 --> 0:01:17.700000
 in my routing table or is
 it a different method?

0:01:17.700000 --> 0:01:23.120000
 If it is a different method, then he
 says, okay, of all the ways I could

0:01:23.120000 --> 0:01:27.020000
 learn about a route, either because I'm
 sitting on it, I'm directly connected

0:01:27.020000 --> 0:01:31.760000
 to it, somebody statically typed it
 in as a static route, or I learned

0:01:31.760000 --> 0:01:35.860000
 about it via some routing protocol of
 all those methods, each one of them

0:01:35.860000 --> 0:01:39.560000
 I'm going to prioritize them from the
 absolute best out of all of them

0:01:39.560000 --> 0:01:42.240000
 to the absolute worst
 out of all of them.

0:01:42.240000 --> 0:01:46.380000
 Each one of these is going to be prioritized
 with a number called administrative

0:01:46.380000 --> 0:01:50.880000
 distance. So with administrative distance
 like it says, it defines the

0:01:50.880000 --> 0:01:55.700000
 trustworthiness or the preferably
 of a routing protocol.

0:01:55.700000 --> 0:01:59.100000
 And when I say a routing protocol,
 I mean any method or route could be

0:01:59.100000 --> 0:02:01.680000
 learned, including static routes
 and connected routes.

0:02:01.680000 --> 0:02:06.880000
 Those also have a number called
 administrative distance.

0:02:06.880000 --> 0:02:11.600000
 It's an 8-bit number, as we
 can see here, from 0 to 255.

0:02:11.600000 --> 0:02:14.720000
 And the lower the
 value, the better.

0:02:14.720000 --> 0:02:18.780000
 So the lower the administrative distance,
 the more preferable that is.

0:02:18.780000 --> 0:02:21.100000
 So we can see here this chart.

0:02:21.100000 --> 0:02:25.580000
 And if you're preparing for your CCNA,
 yes, unfortunately, this is something

0:02:25.580000 --> 0:02:29.260000
 you're going to want to memorize all
 these administrative distance values

0:02:29.260000 --> 0:02:30.840000
 that you can see right here.

0:02:30.840000 --> 0:02:33.500000
 So let's look at it.

0:02:33.500000 --> 0:02:38.660000
 So if the router has a routing table
 and it got there because he's sitting

0:02:38.660000 --> 0:02:42.320000
 on that interface, he is
 a host in that network.

0:02:42.320000 --> 0:02:44.020000
 He is directly connected to it.

0:02:44.020000 --> 0:02:45.960000
 You can't get any
 better than that.

0:02:45.960000 --> 0:02:50.700000
 If I'm sitting in a room, if I'm sitting
 in the kitchen, and all of a

0:02:50.700000 --> 0:02:54.140000
 sudden somebody shouts in through the
 door, hey, Keith, if you follow

0:02:54.140000 --> 0:02:56.360000
 me, I can tell you how
 to get to the kitchen.

0:02:56.360000 --> 0:02:57.700000
 I'm not going to listen to him.

0:02:57.700000 --> 0:02:59.400000
 I live here. I am in the kitchen.

0:02:59.400000 --> 0:03:00.640000
 I'm directly connected to it.

0:03:00.640000 --> 0:03:01.520000
 Nothing beats that.

0:03:01.520000 --> 0:03:04.720000
 So that's why I directly connected route
 has an administrative distance

0:03:04.720000 --> 0:03:08.640000
 value of zero, the lowest
 best number you can get.

0:03:08.640000 --> 0:03:10.180000
 And that you cannot change.

0:03:10.180000 --> 0:03:12.500000
 You can never change
 that behavior.

0:03:12.500000 --> 0:03:18.200000
 So if I try typing in a static route
 for something he's connected to,

0:03:18.200000 --> 0:03:21.580000
 the static route won't even show up in
 my routing table because his connected

0:03:21.580000 --> 0:03:23.340000
 route beats everything.

0:03:23.340000 --> 0:03:26.700000
 Now, let's say he's not
 connected to something.

0:03:26.700000 --> 0:03:32.320000
 If I statically give him a static route,
 the IP route command, that is

0:03:32.320000 --> 0:03:36.100000
 going to beat out any of
 these routing protocols.

0:03:36.100000 --> 0:03:39.960000
 Static routes have an administrative
 distance of one which is lower than

0:03:39.960000 --> 0:03:42.380000
 any of the routing protocols.

0:03:42.380000 --> 0:03:49.440000
 Now everything from here to here, everything
 in this box is changeable.

0:03:49.440000 --> 0:03:54.000000
 So there are commands you can use to
 actually make a static route less

0:03:54.000000 --> 0:03:58.300000
 preferable. You could say, well, I actually
 want RIP to be preferred over

0:03:58.300000 --> 0:04:04.840000
 static routes. Or I want ISIS to
 be more preferred than EIGRP.

0:04:04.840000 --> 0:04:08.560000
 You can do that by modifying these
 administrative distance values.

0:04:08.560000 --> 0:04:12.840000
 Now, at the CCNA level, they do not
 expect you to know how to do that.

0:04:12.840000 --> 0:04:15.700000
 The only administrative distance value
 that you're expected to know how

0:04:15.700000 --> 0:04:20.320000
 to change at the CCNA level is the
 administrative distance value for a

0:04:20.320000 --> 0:04:22.420000
 static route. And
 that's real easy.

0:04:22.420000 --> 0:04:24.960000
 You just configure your
 IP route statement.

0:04:24.960000 --> 0:04:27.620000
 However, it's going
 to be IP route.

0:04:27.620000 --> 0:04:30.800000
 And you give it whatever
 your route's going to be.

0:04:30.800000 --> 0:04:34.420000
 And then you give it your mask.

0:04:34.420000 --> 0:04:39.060000
 And then you give the next top
 address, whatever that is.

0:04:39.060000 --> 0:04:45.700000
 And then the very last thing you type in
 is a number, administrative distance

0:04:45.700000 --> 0:04:50.940000
 value. For example, I could
 type in the number 100.

0:04:50.940000 --> 0:04:55.660000
 And by typing in the number 100, that
 means this particular static route

0:04:55.660000 --> 0:04:58.880000
 no longer has administrative
 distance of 1.

0:04:58.880000 --> 0:05:02.280000
 It now has an administrative
 distance of 100.

0:05:02.280000 --> 0:05:07.040000
 Which means if I learn of that same
 route as an EIGRP internal route,

0:05:07.040000 --> 0:05:10.100000
 the EIGRP internal route will win.


0:05:10.100000 --> 0:05:13.140000
 That will be the one that gets into the
 routing table because it is better

0:05:13.140000 --> 0:05:17.020000
 than administrative
 distance of 100.

0:05:17.020000 --> 0:05:20.940000
 These other ones here you also can change,
 but that is at the CCNP level

0:05:20.940000 --> 0:05:24.020000
 where you learn how to
 change those values.

0:05:24.020000 --> 0:05:31.500000
 So if I learn of a route and it's a
 route I already knew in my routing

0:05:31.500000 --> 0:05:36.100000
 table and the method
 was different.

0:05:36.100000 --> 0:05:39.680000
 I learned about it via OSPF, but
 now here it comes in via RIP.

0:05:39.680000 --> 0:05:43.440000
 Okay. Compare the administrative distance
 values between OSPF and RIP,

0:05:43.440000 --> 0:05:44.720000
 which one's better.

0:05:44.720000 --> 0:05:50.180000
 Oh, I learned about it via BGP,
 but it comes in via OSPF.

0:05:50.180000 --> 0:05:51.420000
 Which one is better?

0:05:51.420000 --> 0:05:54.340000
 So that's how you answer that question,
 Ministry of Distance.

0:05:54.340000 --> 0:05:59.900000
 But what if the way that you learned
 it is the same, right?

0:05:59.900000 --> 0:06:03.440000
 What if I learned about a network and
 I say, okay, it came in via EIGRP,

0:06:03.440000 --> 0:06:06.460000
 but I already had it via EIGRP.

0:06:06.460000 --> 0:06:08.940000
 I already knew about it via EIGRP.


0:06:08.940000 --> 0:06:11.760000
 Then a Ministry of Distance is not going
 to be able to help you because

0:06:11.760000 --> 0:06:14.840000
 the methods are exactly identical.


0:06:14.840000 --> 0:06:18.360000
 So in order now to figure out which
 is the best route, now we look at

0:06:18.360000 --> 0:06:23.280000
 something called the routing metric, which
 is used for the best path selection

0:06:23.280000 --> 0:06:34.860000
 process. So all of your, with static
 routes there is no routing metric.

0:06:34.860000 --> 0:06:40.460000
 So in other words, if I, I could create
 seven static routes to the same

0:06:40.460000 --> 0:06:46.540000
 destination prefix, IP route 9.9 blah,
 blah, blah, blah, IP route 9.9,

0:06:46.540000 --> 0:06:49.280000
 blah, blah, blah, blah, IP route
 9.9, I could keep doing that.

0:06:49.280000 --> 0:06:50.820000
 They would all be
 seen as the same.

0:06:50.820000 --> 0:06:54.540000
 So all of those static routes would
 be put into my routing table.

0:06:54.540000 --> 0:06:57.380000
 And my router could now load balance
 between those different next hops

0:06:57.380000 --> 0:07:00.080000
 to get to the 9.9 network.

0:07:00.080000 --> 0:07:05.340000
 All of your routing protocols though,
 when I'm a router and your router,

0:07:05.340000 --> 0:07:08.220000
 my favorite terminology, I'm
 a router, your router.

0:07:08.220000 --> 0:07:11.720000
 And we're speaking a routing
 protocol to each other.

0:07:11.720000 --> 0:07:15.600000
 When I send you a prefix, when I send
 you a network, in addition to sending

0:07:15.600000 --> 0:07:19.220000
 you the network, the subnet mask and
 saying, hey, you can use me, I'm

0:07:19.220000 --> 0:07:21.660000
 your next hop, let me give
 you my IP address.

0:07:21.660000 --> 0:07:26.200000
 In addition to that, I give you a value,
 a descriptive characteristic

0:07:26.200000 --> 0:07:30.860000
 of that route that gives you some indications
 far as what it takes me

0:07:30.860000 --> 0:07:33.340000
 to get there, what it
 costs me to get there.

0:07:33.340000 --> 0:07:37.040000
 That is called the metric,
 the routing metric.

0:07:37.040000 --> 0:07:42.700000
 And different routing protocols describe
 a routing metric in different

0:07:42.700000 --> 0:07:47.500000
 ways. Whatever the way it is,
 it's going to be a number.

0:07:47.500000 --> 0:07:50.620000
 It's a numerical number
 and lower is preferred.

0:07:50.620000 --> 0:07:52.900000
 Just like with administrative
 distance, lower was preferred.

0:07:52.900000 --> 0:07:56.940000
 If I learn about the route via the
 same method, let's say they're both

0:07:56.940000 --> 0:08:00.080000
 learned via RIP or they're
 both learned via OSPF.

0:08:00.080000 --> 0:08:03.680000
 I'm going to say, okay, what
 is the metric that OSPF uses?

0:08:03.680000 --> 0:08:06.380000
 Which one has the
 lower OSPF metric?

0:08:06.380000 --> 0:08:08.220000
 What's the metric that RIP uses?

0:08:08.220000 --> 0:08:11.720000
 Which one has the
 lower RIP metric?

0:08:11.720000 --> 0:08:16.480000
 And depending on the routing protocol
 we're talking about, depends on

0:08:16.480000 --> 0:08:17.740000
 the different metric.

0:08:17.740000 --> 0:08:21.840000
 So this is also something you definitely
 need to know for the CCNA exam.

0:08:21.840000 --> 0:08:26.380000
 What the metrics are called and how
 they're derived for the different

0:08:26.380000 --> 0:08:27.780000
 routing protocols.

0:08:27.780000 --> 0:08:30.740000
 For example, let's just take
 the easiest one, RIP.

0:08:30.740000 --> 0:08:33.400000
 The metric of RIP is Hopcount.

0:08:33.400000 --> 0:08:35.780000
 In other words, when I send you, let's
 say you and I are both speaking

0:08:35.780000 --> 0:08:40.020000
 RIP and I send you a RIP update, I send
 you a RIP message that says, hey,

0:08:40.020000 --> 0:08:44.800000
 I'm your neighbor and you can get
 to the 70 network through me.

0:08:44.800000 --> 0:08:46.980000
 And the Hopcount is four.

0:08:46.980000 --> 0:08:50.480000
 What that means to you is you know that
 to get to the 70 network you have

0:08:50.480000 --> 0:08:53.160000
 to hop through four routers.

0:08:53.160000 --> 0:08:55.720000
 That when you're going to send a packet
 to the 70 network, if you use

0:08:55.720000 --> 0:08:59.480000
 me, if you select my path as the best
 path, you'll be hopping through

0:08:59.480000 --> 0:09:01.760000
 four routers to get there.

0:09:01.760000 --> 0:09:04.860000
 Whereas if another RIP router says,
 hey, I can also get you to the 70

0:09:04.860000 --> 0:09:09.380000
 network with a Hopcount of two, well,
 now you're going to choose him because

0:09:09.380000 --> 0:09:12.480000
 lower is better, right?

0:09:12.480000 --> 0:09:16.600000
 Two hops is closer to
 you than four hops.

0:09:16.600000 --> 0:09:19.240000
 So the metric RIP
 uses is Hopcount.

0:09:19.240000 --> 0:09:21.760000
 OSPF uses something
 called bandwidth.

0:09:21.760000 --> 0:09:25.860000
 OSPF says, okay, what is the
 bandwidth of the path?

0:09:25.860000 --> 0:09:30.380000
 Let me put that bandwidth into a formula
 and I'll come up with a metric

0:09:30.380000 --> 0:09:33.520000
 called cost. I should actually
 put that in here.

0:09:33.520000 --> 0:09:42.160000
 The actual technical term is called
 a cost, which is based on bandwidth.

0:09:42.160000 --> 0:09:47.300000
 So when I send you an OSPF link state
 advertisement that has a route inside

0:09:47.300000 --> 0:09:51.660000
 of it, I'll say, and by the way,
 the cost is, let's say one.

0:09:51.660000 --> 0:09:55.420000
 Well, as it turns out, if I have a fast
 ethernet interface, 100 million

0:09:55.420000 --> 0:09:59.240000
 bits per second, that's the bandwidth,
 100 million bits per second.

0:09:59.240000 --> 0:10:02.480000
 Well, if I take that 100 million bits
 per second, plug it into the formula

0:10:02.480000 --> 0:10:08.020000
 that OSPF uses, it will come
 up with a cost of one.

0:10:08.020000 --> 0:10:11.240000
 If somebody else says, hey, I can get
 you also the 70 network with an

0:10:11.240000 --> 0:10:15.720000
 OSPF cost of five, lower is
 better, you'll prefer me.

0:10:15.720000 --> 0:10:20.000000
 An OSPF cost of one is better
 than OSPF cost of five.

0:10:20.000000 --> 0:10:25.380000
 Now, you can start to see how if I sent
 you the 70 network via OSPF with

0:10:25.380000 --> 0:10:31.560000
 a cost of one, and he sent you the
 70 network with a RIP, Hopcount of

0:10:31.560000 --> 0:10:34.160000
 one, you couldn't compare
 those metrics.

0:10:34.160000 --> 0:10:36.380000
 It's like comparing
 apples to oranges.

0:10:36.380000 --> 0:10:39.120000
 You can't compare a cost
 against Hopcount.

0:10:39.120000 --> 0:10:41.100000
 That's why we have administrative
 distance.

0:10:41.100000 --> 0:10:44.340000
 When the protocols are different,
 we use administrative distance.

0:10:44.340000 --> 0:10:48.840000
 When the protocols are the same, we
 use the metric that protocol uses

0:10:48.840000 --> 0:10:51.200000
 to figure out the best one.

0:10:51.200000 --> 0:10:53.860000
 And the EIRP metric
 is fairly complex.

0:10:53.860000 --> 0:10:57.900000
 It actually computes a lot of different
 factors into its formula when

0:10:57.900000 --> 0:10:59.740000
 it comes up with its metric.

0:10:59.740000 --> 0:11:04.940000
 And its metric is called distance.


0:11:04.940000 --> 0:11:12.700000
 OSPF metric is called distance.

0:11:12.700000 --> 0:11:18.100000
 So that concludes this video on
 figuring out the best route.

0:11:18.100000 --> 0:11:22.480000
 In the next video, we're going to start
 our section on comparing and contrasting

0:11:22.480000 --> 0:11:26.160000
 routing protocols from a high level to
 see what makes them different from

