WEBVTT

0:00:04.940000 --> 0:00:10.000000
 So now as we're continuing on our journey
 of comparing and contrasting

0:00:10.000000 --> 0:00:14.100000
 types of routing protocols, we're going
 to look at the third type here,

0:00:14.100000 --> 0:00:17.020000
 which is advanced distance vector.


0:00:17.020000 --> 0:00:20.880000
 Some people at Cisco Systems,
 they said, you know what?

0:00:20.880000 --> 0:00:26.980000
 On the one hand, link state routing protocol
 is good because if the routing

0:00:26.980000 --> 0:00:32.280000
 table never changes, why re-send it over
 and over and over and over again

0:00:32.280000 --> 0:00:34.040000
 like distance vector does?

0:00:34.040000 --> 0:00:35.860000
 That's overkill.

0:00:35.860000 --> 0:00:38.880000
 And link state is good because it's
 good to actually build a neighbor

0:00:38.880000 --> 0:00:43.840000
 relationship. Check the ground rules
 first, make sure certain things match

0:00:43.840000 --> 0:00:46.340000
 before you send your routes.

0:00:46.340000 --> 0:00:48.440000
 Distance vector doesn't do that.

0:00:48.440000 --> 0:00:53.700000
 But at the same time, what distance vector
 does have going for it is that

0:00:53.700000 --> 0:00:58.860000
 in order to know everything
 about everything.

0:00:58.860000 --> 0:01:02.520000
 All you need to know is about your
 next top neighbors and what routes

0:01:02.520000 --> 0:01:03.740000
 they're telling you about.

0:01:03.740000 --> 0:01:07.980000
 You don't really need all the visibility
 into the entire topology, which

0:01:07.980000 --> 0:01:09.440000
 link state does.

0:01:09.440000 --> 0:01:13.880000
 So in that regard, distance vector
 is actually a little bit better.

0:01:13.880000 --> 0:01:19.120000
 We should create a routing protocol
 that has characteristics of both of

0:01:19.120000 --> 0:01:25.240000
 them. And that is where we get
 advanced distance vector.

0:01:25.240000 --> 0:01:30.680000
 So in advanced distance vector, like link
 state does require that neighborships

0:01:30.680000 --> 0:01:37.000000
 be built. Like link state, it will exchange
 all of its routes right the

0:01:37.000000 --> 0:01:40.800000
 very beginning when the neighbor
 is very first formed.

0:01:40.800000 --> 0:01:45.360000
 And then it will rely on periodic hellos
 or keep alive to keep those routes

0:01:45.360000 --> 0:01:53.280000
 believable. Like distance vector, all
 it knows about is itself as directly

0:01:53.280000 --> 0:01:54.480000
 connected neighbor.

0:01:54.480000 --> 0:01:59.980000
 It does not have visibility into the
 full topology of your company.

0:01:59.980000 --> 0:02:05.360000
 It will keep a topology
 table of learned routes.

0:02:05.360000 --> 0:02:10.040000
 This is actually probably more of a
 distance vector characteristic than

0:02:10.040000 --> 0:02:12.160000
 a link state characteristic.

0:02:12.160000 --> 0:02:20.040000
 So actually, let me make that change here
 because that's not really correct.

0:02:20.040000 --> 0:02:27.400000
 Let's say distance vector
 characteristic.

0:02:27.400000 --> 0:02:31.160000
 That makes more sense.

0:02:31.160000 --> 0:02:35.080000
 Topology table of learned routes, that's more
 like a distance vector characteristic.

0:02:35.080000 --> 0:02:39.480000
 However, advanced distance vector will
 also keep track of a neighbor table.

0:02:39.480000 --> 0:02:45.460000
 And that is definitely a link
 state characteristic.

0:02:45.460000 --> 0:02:50.340000
 And EIGRP, the Enhanced Interior Gateway
 Routing Protocol, is an example

0:02:50.340000 --> 0:02:53.900000
 of an advanced distance
 vector routing protocol.

0:02:53.900000 --> 0:02:57.240000
 We also sometimes call it a hybrid routing
 protocol because it has characteristics

0:02:57.240000 --> 0:03:02.240000
 of both distance vector
 and link state.

0:03:02.240000 --> 0:03:07.160000
 In the next video, we're going to look
 at path vector routing protocols.

