WEBVTT

0:00:02.040000 --> 0:00:06.420000
 In this brief video, I'd like to go over
 four deployment options you have

0:00:06.420000 --> 0:00:11.180000
 when utilizing a Cisco
 Web Security Appliance.

0:00:11.180000 --> 0:00:14.580000
 So I'm going to be talking about the
 methods of implementing something

0:00:14.580000 --> 0:00:18.880000
 called a transparent proxy, or alternatively
 you could implement it as

0:00:18.880000 --> 0:00:23.260000
 what's called an explicit forward proxy,
 and I'll also briefly show you

0:00:23.260000 --> 0:00:27.260000
 where the WSA would sit as far as the
 layer forward traffic monitoring

0:00:27.260000 --> 0:00:29.140000
 features concerned.

0:00:29.140000 --> 0:00:33.000000
 So the first thing we have to be aware
 of are the WSA interfaces and what

0:00:33.000000 --> 0:00:37.560000
 they look like. So you notice here
 that there are three main kinds of

0:00:37.560000 --> 0:00:41.340000
 interfaces, MP and T interfaces.

0:00:41.340000 --> 0:00:46.780000
 So the M1 port as you can see here,
 highlighted in orange, so right here

0:00:46.780000 --> 0:00:49.960000
 is our M1 port, that's used
 for managing the device.

0:00:49.960000 --> 0:00:51.020000
 So that's the management port.

0:00:51.020000 --> 0:00:55.560000
 It can also be used as an additional
 data port if you wish, but that's

0:00:55.560000 --> 0:00:57.720000
 not its primary function.

0:00:57.720000 --> 0:01:05.120000
 Your data ports are the P1 and P2 ports
 that we see right here, P1 and

0:01:05.120000 --> 0:01:09.720000
 P2 ports. So that's where the actual
 web lookups and download web pages

0:01:09.720000 --> 0:01:14.620000
 would be sent to physically terminate
 on those interfaces.

0:01:14.620000 --> 0:01:18.800000
 And then lastly, if you're implementing
 the layer four traffic monitoring

0:01:18.800000 --> 0:01:25.180000
 feature, that traffic goes in and out
 of your T1 and possibly T2 ports

0:01:25.180000 --> 0:01:29.260000
 as well. Now I'll go into a little bit
 more detail as far as why is there

0:01:29.260000 --> 0:01:35.340000
 that separation between the
 P1 and P2 and the T1 and T2.

0:01:35.340000 --> 0:01:39.720000
 All right, so real quickly deployment
 options, let's start with transparent

0:01:39.720000 --> 0:01:44.560000
 deployments. Your first option is transparent
 proxy with the layer four

0:01:44.560000 --> 0:01:49.160000
 switch. Now when we say transparent,
 what that means is that the client,

0:01:49.160000 --> 0:01:54.380000
 the laptop, the PC has no idea that
 there's this proxy device, this WSA

0:01:54.380000 --> 0:01:58.500000
 that's actually intercepting its traffic
 and monitoring that traffic,

0:01:58.500000 --> 0:02:01.020000
 both in the upload and
 download direction.

0:02:01.020000 --> 0:02:02.560000
 That's what we mean
 by transparent.

0:02:02.560000 --> 0:02:06.840000
 So there's nothing being done on the
 end user itself, the laptop, the

0:02:06.840000 --> 0:02:11.300000
 PC, the server. So if you're using
 a layer four switch, most likely we

0:02:11.300000 --> 0:02:14.800000
 would have to implement policy based
 routing on the layer four switch

0:02:14.800000 --> 0:02:21.400000
 to pick up your HTTP and HTTPS traffic
 and redirect it to the P1 or P2

0:02:21.400000 --> 0:02:24.340000
 port of your web security
 appliance.

0:02:24.340000 --> 0:02:29.840000
 If your switch does not support policy
 based routing, alternatively, or

0:02:29.840000 --> 0:02:33.540000
 if you don't want to do that, you can
 do transparent proxy using a firewall

0:02:33.540000 --> 0:02:38.020000
 or router. In this particular case, you
 could still use policy based routing

0:02:38.020000 --> 0:02:42.180000
 if you're using a firewall or router
 or you could potentially use the

0:02:42.180000 --> 0:02:47.300000
 web cache communications protocol to
 redirect the information to and from

0:02:47.300000 --> 0:02:54.220000
 the WSA. By the way, the web cache control
 protocol is Cisco proprietary.

0:02:54.220000 --> 0:02:59.860000
 Alternatively, we could have explicit
 forward proxy, probably the least

0:02:59.860000 --> 0:03:09.560000
 desirable of all of your clients, your
 laptops, your PCs, your servers,

0:03:09.560000 --> 0:03:13.980000
 and configure those browsers to send
 their web traffic to this proxy,

0:03:13.980000 --> 0:03:15.680000
 which is the WSA.

0:03:15.680000 --> 0:03:21.120000
 That's going to require the most work
 from you as a network administrator.

0:03:21.120000 --> 0:03:24.000000
 And then here we have the layer
 four traffic monitor.

0:03:24.000000 --> 0:03:27.060000
 Now a couple of things I
 want to point out here.

0:03:27.060000 --> 0:03:30.780000
 Use of the layer four traffic monitor
 feature is not an or solution, it's

0:03:30.780000 --> 0:03:31.560000
 an and solution.

0:03:31.560000 --> 0:03:35.900000
 You can use both the WSA as a layer
 four traffic monitor as well as the

0:03:35.900000 --> 0:03:41.000000
 normal WSA features of filtering
 and monitoring of web traffic.

0:03:41.000000 --> 0:03:44.220000
 So the thing you got to keep in mind
 is the layer four traffic monitoring

0:03:44.220000 --> 0:03:50.020000
 engine is actually a completely separate
 engine from all the other stuff

0:03:50.020000 --> 0:03:52.040000
 that the WSA does.

0:03:52.040000 --> 0:03:55.940000
 So it doesn't have actually
 any visibility.

0:03:55.940000 --> 0:03:58.940000
 The layer four traffic monitoring engine
 does not have any visibility

0:03:58.940000 --> 0:04:00.720000
 to what's going on
 with these P ports.

0:04:00.720000 --> 0:04:02.520000
 The P one and the P two.

0:04:02.520000 --> 0:04:05.580000
 So traffic is coming in and going
 out of P one and P two.

0:04:05.580000 --> 0:04:08.520000
 The layer for traffic monitoring
 engine doesn't see it.

0:04:08.520000 --> 0:04:11.840000
 That's why if you're going to have
 layer four traffic monitoring, you

0:04:11.840000 --> 0:04:15.220000
 have to send this stuff to the T one
 and T two ports because that's where

0:04:15.220000 --> 0:04:18.340000
 that engine is actually
 inspecting things.

0:04:18.340000 --> 0:04:24.800000
 Now also when you're using layer four
 traffic monitoring, okay, so the

0:04:24.800000 --> 0:04:31.180000
 idea here is that this port, the T one
 port is not actually in line with

0:04:31.180000 --> 0:04:34.080000
 the traffic. So what
 do I mean by that?

0:04:34.080000 --> 0:04:39.780000
 So for using, for example, a switch
 right here as the traffic comes in,

0:04:39.780000 --> 0:04:42.620000
 the switch would implement
 the span feature.

0:04:42.620000 --> 0:04:50.140000
 You might know that as the port monitoring
 feature, which basically tells

0:04:50.140000 --> 0:04:55.000000
 the switch, hey, this is your span ingress
 port right here, maybe an entire

0:04:55.000000 --> 0:04:59.580000
 VLAN. That's your
 span source port.

0:04:59.580000 --> 0:05:03.420000
 And then your span destination port is
 this port right here that connects

0:05:03.420000 --> 0:05:05.260000
 to the T one port.

0:05:05.260000 --> 0:05:08.000000
 So what span is doing in case you're
 not familiar with this feature is

0:05:08.000000 --> 0:05:12.380000
 span just says, hey, when traffic comes
 in my span source port, let it

0:05:12.380000 --> 0:05:23.740000
 go through like it normally does, but
 so in this case, the WSA is because

0:05:23.740000 --> 0:05:25.480000
 it's not in line, right?

0:05:25.480000 --> 0:05:30.340000
 The traffic is sort of flowing outside
 of it, but the copy traffic is

0:05:30.340000 --> 0:05:35.140000
 reaching the WSA on its T one port
 where layer four traffic monitoring

0:05:35.140000 --> 0:05:38.200000
 can inspect it. Now you might be wondering,
 well, if this is not in line,

0:05:38.200000 --> 0:05:42.240000
 if the traffic is going right around
 it, how can the layer four traffic

0:05:42.240000 --> 0:05:47.160000
 monitoring prevent malware and viruses
 and stuff from phoning home from

0:05:47.160000 --> 0:05:48.180000
 sending information upstream?

0:05:48.180000 --> 0:05:53.240000
 Well, because if the layer four traffic
 monitoring engine spots that happening,

0:05:53.240000 --> 0:05:56.460000
 it can actually stop
 in one of two ways.

0:05:56.460000 --> 0:05:59.580000
 It can send out a TCP reset.

0:05:59.580000 --> 0:06:06.980000
 If we're talking about TCP messages,
 or it can send out an ICMP message,

0:06:06.980000 --> 0:06:14.820000
 ICMP host unreachable
 for UDP traffic.

0:06:14.820000 --> 0:06:19.440000
 So what you really have to think about
 is that these two things would

0:06:19.440000 --> 0:06:24.480000
 be combined. In other words, this switch
 right here would actually have

0:06:24.480000 --> 0:06:27.000000
 two physical connections.

0:06:27.000000 --> 0:06:30.160000
 If we're going to assume it's connected
 to a switch, it would have two

0:06:30.160000 --> 0:06:33.100000
 physical connections to the WSA.

0:06:33.100000 --> 0:06:41.080000
 Let me just draw it like this.

0:06:41.080000 --> 0:06:49.640000
 So what you'd be looking at is here's
 the client, here's the switch, and

0:06:49.640000 --> 0:07:00.040000
 here's my WSA. You'd have
 something like this.

0:07:00.040000 --> 0:07:05.560000
 So this would be configured
 as a span source port.

0:07:05.560000 --> 0:07:10.360000
 This would be your span
 destination port.

0:07:10.360000 --> 0:07:13.060000
 This would be your T1 port.

0:07:13.060000 --> 0:07:15.940000
 So that's for your layer
 four traffic monitoring.

0:07:15.940000 --> 0:07:21.020000
 So maybe this is port zero slash four
 on the switch, zero slash five would

0:07:21.020000 --> 0:07:23.140000
 also connect to the WSA.

0:07:23.140000 --> 0:07:26.440000
 That would be my P1 port.

0:07:26.440000 --> 0:07:33.720000
 So what I would have going on here
 is as traffic is coming in, because

0:07:33.720000 --> 0:07:39.220000
 it's a span port, a copy of that traffic
 would be sent here for layer

0:07:39.220000 --> 0:07:41.300000
 four traffic monitoring.

0:07:41.300000 --> 0:07:46.140000
 And then because I have policy based
 routing turned on in this switch,

0:07:46.140000 --> 0:07:50.200000
 the traffic would also be
 redirected out this way.

0:07:50.200000 --> 0:08:00.340000
 So it could be analyzed and inspected
 by all the other WSA features.

0:08:00.340000 --> 0:08:05.940000
 So that concludes this video
 about WSA deployment options.

0:08:05.940000 --> 0:08:06.620000
 Thank you for watching.

