WEBVTT

0:00:08.300000 --> 0:00:12.980000
 So when it comes to access lists, we
 know that at a high level, you have

0:00:12.980000 --> 0:00:15.200000
 a choice of standard or extended.

0:00:15.200000 --> 0:00:17.880000
 And we've talked pretty extensively
 about both types.

0:00:17.880000 --> 0:00:21.480000
 Now up until now, in order to demonstrate
 standard and extended access

0:00:21.480000 --> 0:00:26.340000
 lists, I've showed you their implementation
 with numbered access lists,

0:00:26.340000 --> 0:00:30.900000
 where you say access-list, you provide
 a number, and then Cisco IOS identifies

0:00:30.900000 --> 0:00:34.700000
 that number as either belonging to
 the range of standard or the range

0:00:34.700000 --> 0:00:38.020000
 of extended. Now I've mentioned a couple
 of times that an alternative

0:00:38.020000 --> 0:00:42.680000
 approach is to use standard or extended
 access lists in conjunction with

0:00:42.680000 --> 0:00:46.900000
 named access lists, where instead of
 specifying a number, you specify

0:00:46.900000 --> 0:00:50.900000
 a descriptive name so that when you're
 running through your configuration,

0:00:50.900000 --> 0:00:54.380000
 why you create that access list in the
 first place is a little bit more

0:00:54.380000 --> 0:00:55.280000
 meaningful to you.

0:00:55.280000 --> 0:00:59.300000
 And that's what we're going to
 look at real quickly here.

0:00:59.300000 --> 0:01:03.660000
 So one of the benefits of configuring
 named access lists is it allows

0:01:03.660000 --> 0:01:05.940000
 you to more easily edit them.

0:01:05.940000 --> 0:01:09.280000
 So I've showed you in the previous video
 that if you had a numbered access

0:01:09.280000 --> 0:01:14.940000
 list with several ACE access control
 entries, if you tried to delete one

0:01:14.940000 --> 0:01:19.940000
 of those ACEs, the entire numbered
 access list was deleted.

0:01:19.940000 --> 0:01:24.700000
 Now with a named access list, it's much
 easier to delete individual lines

0:01:24.700000 --> 0:01:27.420000
 of an ACE, because they're
 actually sequence.

0:01:27.420000 --> 0:01:30.420000
 They're provided with sequence numbers,
 and you can just select a particular

0:01:30.420000 --> 0:01:33.940000
 sequence number and delete
 just that sequence number.

0:01:33.940000 --> 0:01:36.860000
 So here is how you configure them.


0:01:36.860000 --> 0:01:41.840000
 I'm not going to do a lab on this, but
 the idea is still pretty much the

0:01:41.840000 --> 0:01:52.980000
 same. So instead of access dash list
 and then a number, we preface it

0:01:52.980000 --> 0:01:55.020000
 with the word IP.

0:01:55.020000 --> 0:01:59.620000
 So when your access list starts with
 the word IP, now Cisco iOS knows

0:01:59.620000 --> 0:02:02.500000
 you're going to be configuring
 a named access list.

0:02:02.500000 --> 0:02:09.720000
 So IP access dash list, and then after
 that, you're going to specify either

0:02:09.720000 --> 0:02:12.480000
 extended or standard.

0:02:12.480000 --> 0:02:17.940000
 So see, it starts
 out the same way.

0:02:17.940000 --> 0:02:19.600000
 Oops, what happened there?

0:02:19.600000 --> 0:02:24.380000
 Or you can use the word standard.

0:02:24.380000 --> 0:02:29.660000
 So what you provide right here will
 dictate what your options are in the

0:02:29.660000 --> 0:02:34.200000
 access list. And then right here
 is where you type your name.

0:02:34.200000 --> 0:02:37.920000
 Whatever you want your descriptive name
 to be, IP access dash list standard

0:02:37.920000 --> 0:02:43.840000
 payroll or IP access dash list
 extended deny engineering.

0:02:43.840000 --> 0:02:48.800000
 And then you're placed into
 your named access list mode.

0:02:48.800000 --> 0:02:52.840000
 And here, for example, with a standard
 access list, you say permit or

0:02:52.840000 --> 0:02:57.880000
 deny, and then you type in your source
 address and your wildcard.

0:02:57.880000 --> 0:03:00.640000
 It's not showing you the wildcard here,
 but the wildcard mask would still

0:03:00.640000 --> 0:03:01.940000
 be a part of this.

0:03:01.940000 --> 0:03:09.040000
 And the way that you would apply it is
 still with the IP access dash group

0:03:09.040000 --> 0:03:12.840000
 command. But instead of putting a number
 like IP access dash group one

0:03:12.840000 --> 0:03:17.680000
 in or one on one out, you reference
 the name instead.

0:03:17.680000 --> 0:03:23.340000
 And here's an example of how you do
 it with an extended access list.

0:03:23.340000 --> 0:03:28.520000
 Same thing. Start out with the word
 IP, which tells iOS, okay, I'm now

0:03:28.520000 --> 0:03:29.980000
 going to be giving
 an extended app.

0:03:29.980000 --> 0:03:32.260000
 I'm going to be giving
 a named access list.

0:03:32.260000 --> 0:03:36.480000
 And then you say access dash list and
 whatever type you want, standard

0:03:36.480000 --> 0:03:41.120000
 or extended. And because we don't extended,
 we are now in extended access

0:03:41.120000 --> 0:03:45.200000
 list mode, where you have all the same
 options available to you as you

0:03:45.200000 --> 0:03:47.700000
 would with a numbered
 extended access list.

