WEBVTT

0:00:03.080000 --> 0:00:07.320000
 Hello and welcome to this video titled
 Configuring SNMP version 1 and

0:00:07.320000 --> 0:00:11.000000
 version 2c. That's exactly
 what I'm going to cover.

0:00:11.000000 --> 0:00:15.240000
 I'm going to show you how in Cisco
 iOS, how to configure these.

0:00:15.240000 --> 0:00:19.680000
 Whether you're dealing with a router
 or a switch, if you're working with

0:00:19.680000 --> 0:00:23.100000
 Cisco iOS, the configuration
 is the same across the board.

0:00:23.100000 --> 0:00:26.780000
 So step number one, now this step is
 optional, but probably a good idea

0:00:26.780000 --> 0:00:31.500000
 because we know that in version 1 and
 version 2c of SNMP, the community

0:00:31.500000 --> 0:00:34.060000
 string is sent in plain text.

0:00:34.060000 --> 0:00:37.180000
 So anybody can capture it in a sniffer
 trace and once they've got it,

0:00:37.180000 --> 0:00:41.600000
 they could whip out their own network
 management server on their own stuff,

0:00:41.600000 --> 0:00:44.540000
 and now they could start polling your
 routers and switches and getting

0:00:44.540000 --> 0:00:50.480000
 information. So we probably want to limit
 SNMP from only coming from authorized

0:00:50.480000 --> 0:00:55.480000
 sources. We want the agent, the router
 switch, to say, hey, only if it

0:00:55.480000 --> 0:00:59.640000
 passes this access list, will I
 respond to this SNMP message?

0:00:59.640000 --> 0:01:02.420000
 So while it's optional,
 it is a good idea.

0:01:02.420000 --> 0:01:04.600000
 So number one, create
 your access list.

0:01:04.600000 --> 0:01:08.400000
 Just a simple standard access list is
 fine, permitting the various hosts

0:01:08.400000 --> 0:01:14.440000
 or subnets where the legitimate network
 management stations live.

0:01:14.440000 --> 0:01:18.060000
 And then we're going to create our community
 lists, our community strings.

0:01:18.060000 --> 0:01:23.100000
 There's a read only string
 and a read write string.

0:01:23.100000 --> 0:01:28.480000
 So in this particular case right here,
 the word monitors, that's basically

0:01:28.480000 --> 0:01:29.640000
 like our password.

0:01:29.640000 --> 0:01:30.500000
 That could have been anything.

0:01:30.500000 --> 0:01:34.220000
 That could have been Keith
 or I and E or Bob.

0:01:34.220000 --> 0:01:38.880000
 So now on our network management stations,
 which are going to be just

0:01:38.880000 --> 0:01:43.080000
 reading information from the agent,
 not changing it, but reading it, we

0:01:43.080000 --> 0:01:46.260000
 could give them the community
 string of monitors.

0:01:46.260000 --> 0:01:48.340000
 And it is case sensitive,
 by the way.

0:01:48.340000 --> 0:01:51.920000
 And here is another community string
 for those network management stations

0:01:51.920000 --> 0:01:55.600000
 that we want to not only read information
 from the MIB, but we want them

0:01:55.600000 --> 0:01:59.600000
 to be able to write information to
 the MIB as well, which is admins.

0:01:59.600000 --> 0:02:03.640000
 And you can see here, these numbers
 at the end correspond to the access

0:02:03.640000 --> 0:02:06.220000
 lists that we just configured.

0:02:06.220000 --> 0:02:14.740000
 So believe it or not, to configure just
 basic SNMP version 2C on a router

0:02:14.740000 --> 0:02:18.360000
 switch, all you really
 need is this.

0:02:18.360000 --> 0:02:21.060000
 We don't even need an access
 list at the end.

0:02:21.060000 --> 0:02:25.700000
 All you need is a simple SNMP-server
 community for either a read-only,

0:02:25.700000 --> 0:02:27.420000
 a read-write, or both.

0:02:27.420000 --> 0:02:30.800000
 And that's it. Then all the rest of the
 work is done on the actual network

0:02:30.800000 --> 0:02:33.060000
 management server itself.

0:02:33.060000 --> 0:02:35.780000
 Now one other optional
 thing you could do.

0:02:35.780000 --> 0:02:40.680000
 Maybe you want this agent, this firewall,
 this router, the switch, to

0:02:40.680000 --> 0:02:45.680000
 actually send an unsolicited trap message,
 if a certain trigger happens.

0:02:45.680000 --> 0:02:47.580000
 Well, let's take a look at that.

0:02:47.580000 --> 0:02:52.800000
 So in order to do that, knows previously
 in the previous slide, the agent

0:02:52.800000 --> 0:02:55.620000
 had no IP address
 of the actual NMS.

0:02:55.620000 --> 0:02:57.920000
 It didn't know where the NMS was.

0:02:57.920000 --> 0:03:02.020000
 So as soon as the NMS message came in,
 then it would respond back to it.

0:03:02.020000 --> 0:03:06.280000
 Well, here, if we want the agent to actually
 send a trap message, he needs

0:03:06.280000 --> 0:03:10.800000
 to know in advance the IP address of
 the NMS where he's gonna send that

0:03:10.800000 --> 0:03:18.080000
 trap. So here are
 your two options.

0:03:18.080000 --> 0:03:22.680000
 You can see here, the only difference
 between these two is the presence

0:03:22.680000 --> 0:03:29.020000
 of V2C. Now this is for
 in forms right here.

0:03:29.020000 --> 0:03:31.580000
 So this is sending
 for SMP in forms.

0:03:31.580000 --> 0:03:34.500000
 This here is for sending traps.

0:03:34.500000 --> 0:03:39.660000
 But you can see SMP-server host, and
 this IP address would be our server.

0:03:39.660000 --> 0:03:42.980000
 Our network management server running
 solar winds or cacti or whatever

0:03:42.980000 --> 0:03:51.720000
 you're using. And then this
 is your community stream.

0:03:51.720000 --> 0:03:56.040000
 And that concludes this video on the
 basics of configuring SNMP version

0:03:56.040000 --> 0:03:58.240000
 one and version two C.

0:03:58.240000 --> 0:03:58.940000
 Thank you for watching.

