[&] The following configuration has been applied to a router that only contains IP addresses and IP Routing information. After application of this config, the SNMP NMS still cannot access information from this Agent. What could be wrong? ! snmp-server community Access1 RO Access2 (Select the best answer) - You bluffed your way into this job and have no idea what you're doing. - Your NMS is using the Community String of Access1 when it should be using Access2 - You didn't configure an SNMP command referencing the encrypted passphrase - You have failed to configure a named ACL called, "Access1" permitting the NMS - You have failed to configure a named ACL called, "Access2" permitting the NMS [&] What is the purpose behind associating an Access-Control List to your SNMP configuration? (Select the best answer) - To control which SNMP Managers are allowed to access your Agent - To limit SNMP Traps from only authorized Agents - To determine which SNMP packets should be encrypted - To determine which SNMP packets should be authenticated