WEBVTT

0:00:03.000000 --> 0:00:08.460000
 Hello and welcome to this video titled
 Verifying your SNMP configuration.

0:00:08.460000 --> 0:00:10.060000
 And that's exactly what I'm
 going to do in this video.

0:00:10.060000 --> 0:00:14.620000
 I'm going to show you some iOS commands
 to verify your SNMP configuration.

0:00:14.620000 --> 0:00:20.140000
 So you've configured, or at least you
 think you've configured, SNMP in

0:00:20.140000 --> 0:00:22.180000
 your router or your switch.

0:00:22.180000 --> 0:00:25.180000
 And now you're wondering,
 did I do it correctly?

0:00:25.180000 --> 0:00:28.260000
 Is it actually communicating with the
 network management station who's

0:00:28.260000 --> 0:00:31.820000
 polling him? All right, so how do
 you find out the answer to that?

0:00:31.820000 --> 0:00:36.880000
 Well, ideally, in the best of all worlds,
 you'd have access to that network

0:00:36.880000 --> 0:00:41.020000
 management station to be able to jump
 on the console and see a GUI or

0:00:41.020000 --> 0:00:45.260000
 see a graph or something that verified,
 yes, he is actually getting information

0:00:45.260000 --> 0:00:47.080000
 from the router or switch.

0:00:47.080000 --> 0:00:48.240000
 That's really the best way.

0:00:48.240000 --> 0:00:50.540000
 But what if you don't
 have access to that?

0:00:50.540000 --> 0:00:52.960000
 What if the network management station
 is locked down or you don't have

0:00:52.960000 --> 0:00:54.400000
 the password to get
 on that machine?

0:00:54.400000 --> 0:01:00.160000
 Well, your options are kind of limited,
 but there are just four SNMP related

0:01:00.160000 --> 0:01:05.200000
 iOS commands I'm going to show you that
 can verify if A, if you've configured

0:01:05.200000 --> 0:01:10.540000
 the things that you needed to configure
 and B, if there has been any SNMP

0:01:10.540000 --> 0:01:13.940000
 traffic coming and going
 from this device.

0:01:13.940000 --> 0:01:19.940000
 So let's start with
 Show SNMP Stats OID.

0:01:19.940000 --> 0:01:21.700000
 So this is a good one here.

0:01:21.700000 --> 0:01:26.320000
 The very fact that we see a timestamp
 on the left and we see some non

0:01:26.320000 --> 0:01:31.160000
-zero numbers under number of times requested,
 that gives us some pretty

0:01:31.160000 --> 0:01:35.980000
 good proof that those particular OIDs
 have been requested by a network

0:01:35.980000 --> 0:01:37.260000
 management system.

0:01:37.260000 --> 0:01:41.180000
 So if we had messed up our configuration
 in some way and the network management

0:01:41.180000 --> 0:01:45.520000
 system could not talk to this guy,
 we wouldn't see any output here.

0:01:45.520000 --> 0:01:47.320000
 Or maybe we just see zeros.

0:01:47.320000 --> 0:01:51.500000
 So this is some pretty good proof that
 we probably have done things correctly.

0:01:51.500000 --> 0:01:53.400000
 What are some other
 things we can do?

0:01:53.400000 --> 0:01:56.960000
 We can do Show SNMP Group.

0:01:56.960000 --> 0:02:00.660000
 Of course, you could see the group
 in your ShowRun output, but if for

0:02:00.660000 --> 0:02:04.120000
 some reason ShowRun is locked down,
 this is an alternative way to get

0:02:04.120000 --> 0:02:07.420000
 a little bit of information about the SNMP
 groups that you've got configured.

0:02:07.420000 --> 0:02:10.140000
 Here you can see we've got
 a group called Admin.

0:02:10.140000 --> 0:02:16.060000
 It's doing the authentication,
 security model.

0:02:16.060000 --> 0:02:18.080000
 So we can see that.

0:02:18.080000 --> 0:02:25.700000
 Now the SNMP user, when you configure
 an SNMP user in Cisco iOS, it actually

0:02:25.700000 --> 0:02:27.740000
 does not show up in
 the running config.

0:02:27.740000 --> 0:02:30.380000
 And this is done for
 security reasons.

0:02:30.380000 --> 0:02:34.240000
 So let's say you've configured your SNMP
 user and you're wondering, okay,

0:02:34.240000 --> 0:02:38.240000
 did I, it took the command,
 did I do it correctly?

0:02:38.240000 --> 0:02:41.400000
 You can't do a ShowRun because if you
 look at the running config, it's

0:02:41.400000 --> 0:02:45.120000
 not in there. And that might make you
 think, oh, I guess it didn't take

0:02:45.120000 --> 0:02:47.000000
 the command. Oh, just hold on.

0:02:47.000000 --> 0:02:48.800000
 It may have taken the command.

0:02:48.800000 --> 0:02:53.440000
 So the way to verify it is by looking
 at ShowSNMP user, like you can see

0:02:53.440000 --> 0:02:55.760000
 right here. And this will show
 you a lot of good output.

0:02:55.760000 --> 0:02:58.540000
 It'll give you the name,
 the username of the user.

0:02:58.540000 --> 0:03:00.480000
 It'll tell you the authentication.


0:03:00.480000 --> 0:03:05.140000
 So you can see that user was
 configured with off-priv.

0:03:05.140000 --> 0:03:08.340000
 So it's got Shaw for authentication,
 AES 128.

0:03:08.340000 --> 0:03:10.860000
 It will not show you
 the passwords.

0:03:10.860000 --> 0:03:14.460000
 So if you suspect your passwords may
 have been wrong, you'll just have

0:03:14.460000 --> 0:03:16.300000
 to reconfigure that user.

0:03:16.300000 --> 0:03:21.780000
 But at least this is confirmation that
 we do have a username called test

0:03:21.780000 --> 0:03:25.340000
 for SNMP V3 in the system.

0:03:25.340000 --> 0:03:28.660000
 And then the last iOS command I want
 to make you familiar with is just

0:03:28.660000 --> 0:03:31.380000
 simply the ShowSNMP command.

0:03:31.380000 --> 0:03:34.240000
 And you can see here, we've
 got some numbers.

0:03:34.240000 --> 0:03:38.740000
 For example, 1,268 times that
 variables were requested.

0:03:38.740000 --> 0:03:42.680000
 There were 224 GET request PDUs.

0:03:42.680000 --> 0:03:47.380000
 So if you just run this command every minute
 or so and you see those counters

0:03:47.380000 --> 0:03:52.240000
 incrementing, that's another good indicator
 that the network management

0:03:52.240000 --> 0:03:57.300000
 station is indeed communicating
 with this agent.

0:03:57.300000 --> 0:04:00.140000
 So that concludes this video.

0:04:00.140000 --> 0:04:00.920000
 Thank you for watching.

