WEBVTT

0:00:03.060000 --> 0:00:07.300000
 Hello and welcome to this video
 titled Introduction to Cyslog.

0:00:07.300000 --> 0:00:11.280000
 In this video I'm going
 to talk about Cyslog.

0:00:11.280000 --> 0:00:13.840000
 I'm going to give you an introduction
 to what it is and why you would

0:00:13.840000 --> 0:00:17.900000
 use it. We'll talk about the Cyslog
 messages and the transport mechanism

0:00:17.900000 --> 0:00:22.760000
 to get those messages off your router
 switch and on to a Cyslog server.

0:00:22.760000 --> 0:00:26.680000
 We'll look at the Cyslog message format
 and we'll also talk about facility

0:00:26.680000 --> 0:00:28.500000
 levels and severity levels.

0:00:28.500000 --> 0:00:33.020000
 And then lastly, I'll show you the basic
 configuration on Cisco iOS devices

0:00:33.020000 --> 0:00:38.380000
 to get them to send their Cyslog messages
 to an external Cyslog server.

0:00:38.380000 --> 0:00:42.340000
 All right, so what is Cyslog?

0:00:42.340000 --> 0:00:45.260000
 First of all, why do we
 need logging in general?

0:00:45.260000 --> 0:00:49.820000
 So clearly, we want to see what's happening
 on our router switch or firewall.

0:00:49.820000 --> 0:00:53.040000
 And logging is the most primitive
 basic way of doing that.

0:00:53.040000 --> 0:00:56.660000
 So with logging, we can
 see when events happen.

0:00:56.660000 --> 0:00:58.000000
 It's as simple as that.

0:00:58.000000 --> 0:01:02.220000
 We can see when routing processes start
 and stop, we can see when somebody

0:01:02.220000 --> 0:01:06.540000
 shaves the configuration, we can see
 when an interface went up or down,

0:01:06.540000 --> 0:01:09.960000
 we need that stuff, we need
 visibility to that stuff.

0:01:09.960000 --> 0:01:12.740000
 So we can see here there's
 several benefits.

0:01:12.740000 --> 0:01:15.780000
 I'm not going to read these to you,
 you can read these yourself.

0:01:15.780000 --> 0:01:19.560000
 But there's many, many benefits to
 having logging done on a router or

0:01:19.560000 --> 0:01:22.880000
 a switch or any device
 for that matter.

0:01:22.880000 --> 0:01:26.540000
 So Cyslog stands for
 System Logging.

0:01:26.540000 --> 0:01:28.640000
 That's what Cyslog is.

0:01:28.640000 --> 0:01:30.800000
 And it's a tool for
 system logging.

0:01:30.800000 --> 0:01:34.460000
 It is standardized in RFC 5424.

0:01:34.460000 --> 0:01:37.600000
 Originally came out in RFC 3164.

0:01:37.600000 --> 0:01:40.020000
 So the idea is simply this.

0:01:40.020000 --> 0:01:44.360000
 If you have spent any more than about
 five minutes on a Cisco router or

0:01:44.360000 --> 0:01:47.880000
 switch, and I'm sure other vendors have
 exactly the same thing, you have

0:01:47.880000 --> 0:01:51.980000
 probably noticed a log message pop up
 while you're configuring or changing

0:01:51.980000 --> 0:01:54.100000
 things. That is called a Cyslog.

0:01:54.100000 --> 0:01:59.400000
 Log message saying configuration was
 changed by console or interface,

0:01:59.400000 --> 0:02:02.440000
 changed status to up or something
 of that nature.

0:02:02.440000 --> 0:02:03.980000
 That is a logging message.

0:02:03.980000 --> 0:02:08.300000
 Now by default, that logging message
 just stays right there in the router

0:02:08.300000 --> 0:02:14.100000
 switch, which is great if you have
 to be logged in at that time to see

0:02:14.100000 --> 0:02:18.180000
 it. But what if a logging message comes
 up that's pretty important, like

0:02:18.180000 --> 0:02:22.320000
 an interface going down or a routing
 peer going away and you're not there

0:02:22.320000 --> 0:02:26.900000
 to see it? Well then, how do we
 get access to that log message?

0:02:26.900000 --> 0:02:34.040000
 All right. Well, so these log messages
 are stored in the memory of the

0:02:34.040000 --> 0:02:36.780000
 device, but they're not
 stored for very long.

0:02:36.780000 --> 0:02:40.920000
 And these routers with switches only
 store a minimal quantity of Cyslogs

0:02:40.920000 --> 0:02:43.920000
 and then they override
 it with newer Cyslogs.

0:02:43.920000 --> 0:02:48.960000
 So the whole Cyslog standard was, A,
 let's make these messages sort of

0:02:48.960000 --> 0:02:51.140000
 standardized in format.

0:02:51.140000 --> 0:02:55.880000
 So if the message that's spitting out
 on a Cisco device and a message

0:02:55.880000 --> 0:03:00.320000
 that's spitting out on a Juniper or an
 arrested device follows the Cyslog

0:03:00.320000 --> 0:03:04.840000
 protocol as defined in the RFC, it
 will have certain elements to that

0:03:04.840000 --> 0:03:07.900000
 message. It will follow
 a certain format.

0:03:07.900000 --> 0:03:12.440000
 For example, every Cyslog message will
 have a severity level and all the

0:03:12.440000 --> 0:03:16.560000
 severity levels are well known and
 they're given distinctive names.

0:03:16.560000 --> 0:03:20.260000
 Every Cyslog message will have a certain
 header followed by a body of

0:03:20.260000 --> 0:03:22.000000
 what the actual message was.

0:03:22.000000 --> 0:03:26.720000
 Cyslog also defines a way that you can
 take those messages and send them

0:03:26.720000 --> 0:03:29.400000
 externally to a Cyslog server.

0:03:29.400000 --> 0:03:32.060000
 And that's the best of all worlds because
 that way, even if we're not

0:03:32.060000 --> 0:03:36.400000
 on the router switch at the time, we
 can just peruse those logs from all

0:03:36.400000 --> 0:03:40.460000
 of our devices on a central place
 called a Cyslog server.

0:03:40.460000 --> 0:03:45.400000
 All right. So Cyslog messages, by definition,
 they need to include a timestamp,

0:03:45.400000 --> 0:03:48.620000
 a timestamp, a event message,
 and a severity.

0:03:48.620000 --> 0:03:51.320000
 And then they might also include some
 other optional things like a host

0:03:51.320000 --> 0:03:54.960000
 IP address and some diagnostic
 information.

0:03:54.960000 --> 0:04:00.280000
 Now, when we're sending Cyslog messages
 externally to a Cyslog server,

0:04:00.280000 --> 0:04:07.000000
 that is carried over the user datagram
 protocol, UDP, as UDP port 514.

0:04:07.000000 --> 0:04:11.800000
 Now the Cyslog server is also called
 the event message collector.

0:04:11.800000 --> 0:04:14.960000
 So depending on the paper you're reading,
 it might be called a Cyslog

0:04:14.960000 --> 0:04:18.360000
 server, or it might be called
 the event message collector.

0:04:18.360000 --> 0:04:23.260000
 All right. Diving a little bit deeper
 into the actual message format of

0:04:23.260000 --> 0:04:24.540000
 a Cyslog message.

0:04:24.540000 --> 0:04:30.240000
 So the RFC 5424 goes into great detail
 about what the Cyslog message is

0:04:30.240000 --> 0:04:35.100000
 supposed to look like, but at a high level
 is composed of three main elements,

0:04:35.100000 --> 0:04:39.240000
 a header, some structured data,
 and then the message itself.

0:04:39.240000 --> 0:04:43.560000
 Now the Cyslog header is very, very
 simple, really just two pieces of

0:04:43.560000 --> 0:04:47.960000
 information. And then that's it,
 a priority value and a version.

0:04:47.960000 --> 0:04:51.740000
 Now the priority value, we'll see a
 stiffer trace here of this in just

0:04:51.740000 --> 0:04:53.900000
 a second. Here's the
 formula for it.

0:04:53.900000 --> 0:04:56.420000
 And we'll talk about that
 when we get closer to it.

0:04:56.420000 --> 0:05:00.120000
 And the version, it's not what you
 would normally think of as version

0:05:00.120000 --> 0:05:04.440000
 like there's OSPF version two, version
 three, SNMP version two, version

0:05:04.440000 --> 0:05:09.240000
 three. In this case, we're not talking
 about a version of the Cyslog protocol

0:05:09.240000 --> 0:05:13.460000
 itself. In this case, versions,
 it's more of a counter.

0:05:13.460000 --> 0:05:19.300000
 For example, if I'm a router and you're
 the Cyslog server, every single

0:05:19.300000 --> 0:05:23.260000
 time I send you a Cyslog message in UDP,
 the version number is just going

0:05:23.260000 --> 0:05:25.120000
 to increase incrementally.

0:05:25.120000 --> 0:05:27.340000
 It'll be one, two,
 three, four, five.

0:05:27.340000 --> 0:05:33.640000
 So that's what they call the version
 of the Cyslog message.

0:05:33.640000 --> 0:05:37.540000
 Okay, so Cyslog messages have
 two different characteristics.

0:05:37.540000 --> 0:05:41.960000
 They have facility levels and
 they have severity levels.

0:05:41.960000 --> 0:05:45.980000
 So the facility level is
 a value, it's a number.

0:05:45.980000 --> 0:05:50.260000
 And like it says here, it represents
 what was the process in the machine?

0:05:50.260000 --> 0:05:54.380000
 Like what was the process in the
 router or the switch or a server?

0:05:54.380000 --> 0:05:56.200000
 Lots of things could
 generate Cyslogs.

0:05:56.200000 --> 0:06:00.300000
 What was the CPU process
 that generated the event?

0:06:00.300000 --> 0:06:01.420000
 So what was the CPU process
 that generated the event?

0:06:01.420000 --> 0:06:04.540000
 The way of determining which process
 in the machine created the message.

0:06:04.540000 --> 0:06:08.920000
 Now, for talking about Cisco, iOS, routers
 and switches, most of the time,

0:06:08.920000 --> 0:06:13.160000
 they use facility 23,
 which is local use.

0:06:13.160000 --> 0:06:16.600000
 So you'll actually see that in wire shark
 sniffer captures when you capture

0:06:16.600000 --> 0:06:20.820000
 a Cyslog message, you'll
 say facility level 23.

0:06:20.820000 --> 0:06:25.380000
 But you can see there are other ones
 in here, for example, for FTP, NTP

0:06:25.380000 --> 0:06:32.260000
 and others. And each Cyslog message
 has a priority level.

0:06:32.260000 --> 0:06:34.120000
 You've probably seen this.

0:06:34.120000 --> 0:06:37.540000
 So when you're on a router switching
 in the console, and all of a sudden,

0:06:37.540000 --> 0:06:40.760000
 a Cyslog message interrupts you and
 says, oh, you're routing peer just

0:06:40.760000 --> 0:06:43.200000
 went down or your interface
 just went up.

0:06:43.200000 --> 0:06:46.960000
 Each one of those messages will have
 a priority value or a severity level

0:06:46.960000 --> 0:06:51.540000
 inside of it. And you can see here where
 the lower the number, the more

0:06:51.540000 --> 0:06:53.460000
 critical that message is.

0:06:53.460000 --> 0:06:55.000000
 So zero is emergency.

0:06:55.000000 --> 0:06:57.280000
 That means I am about to die.

0:06:57.280000 --> 0:06:58.380000
 I'm letting you know.

0:06:58.380000 --> 0:07:00.260000
 I'm about to shut
 down and blow up.

0:07:00.260000 --> 0:07:03.600000
 So ideally, we don't want to
 see any level zero messages.

0:07:03.600000 --> 0:07:08.720000
 All the way up to level six, which
 is informational and level seven.

0:07:08.720000 --> 0:07:12.640000
 You'll only see level sevens if you actually
 turn on some debugging messages.

0:07:12.640000 --> 0:07:16.800000
 So certainly, if you're ever studying
 for any certification exam, hint

0:07:16.800000 --> 0:07:21.400000
 hint, you'll want to memorize these
 levels, the names and the numbers

0:07:21.400000 --> 0:07:24.960000
 they correspond with.

0:07:24.960000 --> 0:07:30.980000
 Okay, so within a router switch, certainly,
 we can use the logging buffer

0:07:30.980000 --> 0:07:35.260000
 command to store our
 Cyslog messages.

0:07:35.260000 --> 0:07:38.300000
 Now, how do you know if you log into
 an existing device like this right

0:07:38.300000 --> 0:07:42.440000
 here, how do I know if he's
 already doing that?

0:07:42.440000 --> 0:07:44.700000
 Well, for example, see
 this right here?

0:07:44.700000 --> 0:07:47.640000
 That is a Cyslog message, right?

0:07:47.640000 --> 0:07:52.140000
 And this right here, that number
 five, that is our severity level.

0:07:52.140000 --> 0:07:56.960000
 So if I go back to what we were just
 looking at, that is a notice.

0:07:56.960000 --> 0:07:58.480000
 That was a notice message.

0:07:58.480000 --> 0:08:01.920000
 Events that are unusual,
 but not error conditions.

0:08:01.920000 --> 0:08:06.460000
 So in this device, when he printed out
 that, hey, some way he just configured

0:08:06.460000 --> 0:08:10.500000
 it from console, that was
 a severity level of five.

0:08:10.500000 --> 0:08:15.300000
 Now, if we go in here, if we type enable,
 and we just say show logging.

0:08:15.300000 --> 0:08:21.980000
 Okay, so this says here on the console,
 I'm going to see level seven all

0:08:21.980000 --> 0:08:22.860000
 the way on down to zero.

0:08:22.860000 --> 0:08:24.400000
 I'm going to see everything.

0:08:24.400000 --> 0:08:27.940000
 On buffer is disabled.

0:08:27.940000 --> 0:08:30.600000
 So right now, nothing is being
 logged to the buffer.

0:08:30.600000 --> 0:08:34.520000
 So if I'm not actually on
 this device, show log.

0:08:34.520000 --> 0:08:40.720000
 See that? So we saw the Cyslog message
 up here, because I was on the device

0:08:40.720000 --> 0:08:43.580000
 at the time. But that wasn't
 stored anywhere.

0:08:43.580000 --> 0:08:45.220000
 It wasn't stored in the buffer.

0:08:45.220000 --> 0:08:49.860000
 So if I want to store it in that buffer
 to where buffer logging says something

0:08:49.860000 --> 0:08:56.440000
 other than disabled, I would
 say logging buffer.

0:08:56.440000 --> 0:09:00.140000
 And then I get to choose
 what level I want.

0:09:00.140000 --> 0:09:03.020000
 So whatever number, so you could
 pick a name or a number.

0:09:03.020000 --> 0:09:06.120000
 For example, I could say errors.

0:09:06.120000 --> 0:09:12.040000
 I could say that or I could say three,
 because that also corresponds to

0:09:12.040000 --> 0:09:17.640000
 errors. So if I do that, then all my
 Cyslog levels that are a priority

0:09:17.640000 --> 0:09:22.620000
 or severity level of three on
 down to zero will be logged.

0:09:22.620000 --> 0:09:24.800000
 So this isn't just level three.

0:09:24.800000 --> 0:09:30.180000
 This says I want level three, two, one,
 and zero to be stored in my buffer.

0:09:30.180000 --> 0:09:34.220000
 So that's how you get your Cyslog
 saved to your buffer.

0:09:34.220000 --> 0:09:37.880000
 But ideally, you don't want
 them to stay to the buffer.

0:09:37.880000 --> 0:09:42.540000
 You want them also sent to an external
 Cyslog message server.

0:09:42.540000 --> 0:09:46.120000
 And that's simply the
 logging host command.

0:09:46.120000 --> 0:09:50.160000
 Logging host and then the IP address
 of wherever the Cyslog server is.

0:09:50.160000 --> 0:09:53.720000
 And then when you do that, whenever it
 creates a Cyslog, you'll see something

0:09:53.720000 --> 0:09:58.180000
 like this. So this is an actual Cyslog
 message that was captured in Wireshark.

0:09:58.180000 --> 0:10:02.320000
 You can see it goes
 across using IP.

0:10:02.320000 --> 0:10:07.780000
 There it is. UDP port 514.

0:10:07.780000 --> 0:10:11.740000
 So that's the port
 number for Cyslog.

0:10:11.740000 --> 0:10:13.280000
 And then here's our
 Cyslog message.

0:10:13.280000 --> 0:10:15.540000
 It's not very big.

0:10:15.540000 --> 0:10:21.300000
 So you can see right here, this number
 right here, this 189, that's the

0:10:21.300000 --> 0:10:23.160000
 Cyslog priority level.

0:10:23.160000 --> 0:10:27.200000
 Now, not that you'd ever really care
 about this, but if you're wondering

0:10:27.200000 --> 0:10:29.760000
 where the heck did it
 come up with 189?

0:10:29.760000 --> 0:10:38.680000
 There was that calculation for it,
 where you take the facility.

0:10:38.680000 --> 0:10:43.460000
 Remember, Cisco routers and devices
 typically use the number of 23 as

0:10:43.460000 --> 0:10:45.020000
 their facility level.

0:10:45.020000 --> 0:10:55.680000
 Times 8 plus the level or
 priority of the message.

0:10:55.680000 --> 0:11:01.000000
 So if we take those numbers, if we
 take the facility of 23, and that's

0:11:01.000000 --> 0:11:03.980000
 right here, right?

0:11:03.980000 --> 0:11:10.960000
 So if we add those up, so 1011, actually
 1, so it's this whole thing right

0:11:10.960000 --> 0:11:14.700000
 here, that number equals 23.

0:11:14.700000 --> 0:11:19.240000
 We've got the 16, the 4, the 2, and
 the 1 bit, so that's facility.

0:11:19.240000 --> 0:11:22.820000
 That's local 7, reserved
 for local use 23.

0:11:22.820000 --> 0:11:27.320000
 So if we take 23 times
 8, that gives us 184.

0:11:27.320000 --> 0:11:32.840000
 And then this particular message
 was a severity level 5.

0:11:32.840000 --> 0:11:38.120000
 So 184 plus 5 gives us 189.

0:11:38.120000 --> 0:11:40.060000
 That's where that
 number comes from.

0:11:40.060000 --> 0:11:42.820000
 So I suppose you could lock onto that
 in some sort of a filter, something

0:11:42.820000 --> 0:11:44.220000
 if you wanted to.

0:11:44.220000 --> 0:11:48.900000
 And then you can actually see the Cyslog
 message itself, right here in

0:11:48.900000 --> 0:11:52.160000
 plain text, carried across
 to that server.

0:11:52.160000 --> 0:11:53.720000
 So it's not encrypted or anything.


0:11:53.720000 --> 0:11:57.540000
 It's a real basic message that goes
 over to your Cyslog server.

0:11:57.540000 --> 0:12:02.260000
 So that is how Cyslog works.

0:12:02.260000 --> 0:12:04.460000
 That's how we save
 it to the buffer.

0:12:04.460000 --> 0:12:07.680000
 We've talked about facility levels and
 priority levels, and we've talked

0:12:07.680000 --> 0:12:11.400000
 about how to get those Cyslog messages
 to an external Cyslog server for

0:12:11.400000 --> 0:12:13.780000
 storage and later viewing.

0:12:13.780000 --> 0:12:16.780000
 So that concludes this
 video on Cyslog.

0:12:16.780000 --> 0:12:17.660000
 Thank you for watching.

