[&] Which of the following statements are true about implementing Standard Access-Lists for packet filtering? (Select the best answer)
- They must be implemented on interfaces connecting to Servers
- They should be implemented as close to the destination host/network as possible -- Correct
- Standard ACLs should never be used for packet filtering
- They should be implemented as close to the source host/network as possible
- They must be implemented on interfaces connecting to Laptops and PCs

[&] What feature must be paired with a standard Access-List in order to accomplish basic packet filtering? (Select the best answer)
- The "kill that thing" feature
- The "ip access-group" feature -- Correct
- The "ip inspect" feature
- The "ip packet-filter" feature

[&] Which partial ACL configuration will result in Cisco IOS providing you the ability to create a Standard Access-List? (Select two answers)
- Device(config)#access-list 1601 -- Correct
- Device(config)#access-list 90 -- Correct
- Device(config)#access-list 100
- Device(config)#access-list 1204

[&] What field(s) within an IPv4 header can be matched when implementing a Standard Access-List? (Select the best answer)
- Both the source and destination IPv4 addresses
- The source IPv4 address and the TCP/UDP port number
- The destination IPv4 address and the TCP/UDP port number
- Only the source IPv4 address -- Correct
- Only the destination IPv4 address