1
00:00:02,639 --> 00:00:05,389
(dramatic music)

2
00:00:09,235 --> 00:00:10,278
- In this video I'd like to introduce

3
00:00:10,278 --> 00:00:12,328
the concept of GRE tunnels,

4
00:00:12,328 --> 00:00:13,978
and before I do that,

5
00:00:13,978 --> 00:00:16,175
let me just back up for
a moment and talk about

6
00:00:16,175 --> 00:00:18,298
what is a tunnel in the first place?

7
00:00:18,298 --> 00:00:21,093
Here's a real high level
of looking at this concept

8
00:00:21,093 --> 00:00:22,093
of a tunnel.

9
00:00:23,179 --> 00:00:25,272
So imagine for a moment an IP packet,

10
00:00:25,272 --> 00:00:28,460
okay so imagine in binary
you have a string of bits

11
00:00:28,460 --> 00:00:29,984
which is your data,

12
00:00:29,984 --> 00:00:31,928
maybe your web browsing or whatever,

13
00:00:31,928 --> 00:00:33,677
and then in front of that
string of bits you have another

14
00:00:33,677 --> 00:00:37,677
string of bits which is
your TCP segment header,

15
00:00:38,726 --> 00:00:41,961
and then in front of that
you've go another string of bits

16
00:00:41,961 --> 00:00:43,849
which is your IP header,

17
00:00:43,849 --> 00:00:45,306
and that's where it ends.

18
00:00:45,306 --> 00:00:46,771
So you've got your IP header,

19
00:00:46,771 --> 00:00:47,771
your TCP header,

20
00:00:47,771 --> 00:00:49,482
and then all of your data.

21
00:00:49,482 --> 00:00:52,287
Now, that long string of bits,

22
00:00:52,287 --> 00:00:55,894
can you take that as it
is and put it on a wire

23
00:00:55,894 --> 00:00:57,660
and send it out?

24
00:00:57,660 --> 00:00:58,663
Hopefully you said,

25
00:00:58,663 --> 00:01:02,043
"Well no Keith, you can't
take a layer three packet

26
00:01:02,043 --> 00:01:04,036
"and place it directly on a wire,

27
00:01:04,036 --> 00:01:07,018
"you can't just bypass
the data link layer.

28
00:01:07,018 --> 00:01:08,418
"We need the data link layer."

29
00:01:08,418 --> 00:01:10,594
Why do we need the data link layer?

30
00:01:10,594 --> 00:01:12,511
Well because that wire,

31
00:01:13,758 --> 00:01:16,166
let's just assume it's an Ethernet wire,

32
00:01:16,166 --> 00:01:19,143
that Ethernet wire is
expecting ones and zeros

33
00:01:19,143 --> 00:01:21,446
to take the form of Ethernet.

34
00:01:21,446 --> 00:01:24,831
In other words if I send
a string of bits to you,

35
00:01:24,831 --> 00:01:26,738
and it arrives on your Ethernet NIC card,

36
00:01:26,738 --> 00:01:30,170
your Ethernet NIC card is
assuming the first few ones

37
00:01:30,170 --> 00:01:32,404
and zeros are the preamble,

38
00:01:32,404 --> 00:01:34,334
and then the next few
ones and zeros after that

39
00:01:34,334 --> 00:01:36,497
are a destination MAC,

40
00:01:36,497 --> 00:01:38,364
and then there's a source MAC,

41
00:01:38,364 --> 00:01:40,436
so if I just sent you a
string of ones and zeros that

42
00:01:40,436 --> 00:01:42,278
started with the IP header

43
00:01:42,278 --> 00:01:44,433
and there was no Ethernet
header in front of that,

44
00:01:44,433 --> 00:01:45,925
you wouldn't be able to interpret that,

45
00:01:45,925 --> 00:01:47,884
you wouldn't know what to do with that.

46
00:01:47,884 --> 00:01:51,569
So I need to take that IP
packet and wrap it inside of

47
00:01:51,569 --> 00:01:54,094
something that you will understand,

48
00:01:54,094 --> 00:01:57,859
something this cable supports
that I can send to you,

49
00:01:57,859 --> 00:02:01,102
because your NIC card does
not natively understand IP,

50
00:02:01,102 --> 00:02:04,658
but it does understand
another protocol, Ethernet,

51
00:02:04,658 --> 00:02:06,500
which carries IP.

52
00:02:06,500 --> 00:02:09,200
So typically we say that

53
00:02:09,200 --> 00:02:11,395
that's the process of encapsulation,

54
00:02:11,395 --> 00:02:13,606
where I'm taking some protocol,

55
00:02:13,606 --> 00:02:15,932
in this case a layer
two protocol Ethernet,

56
00:02:15,932 --> 00:02:20,265
and I'm using it to
encapsulate something else,

57
00:02:20,265 --> 00:02:23,661
which in this case is a layer
three protocol which is IP.

58
00:02:23,661 --> 00:02:25,462
Another way of saying that is,

59
00:02:25,462 --> 00:02:26,801
tunneling,

60
00:02:26,801 --> 00:02:29,040
in other words I'm taking
some protocol that does not

61
00:02:29,040 --> 00:02:30,913
natively go across this wire,

62
00:02:30,913 --> 00:02:33,154
I can't put it on this
wire and I'm saying well,

63
00:02:33,154 --> 00:02:35,048
how can I put it across this wire?

64
00:02:35,048 --> 00:02:36,717
What if I take this data,

65
00:02:36,717 --> 00:02:37,802
this structure here,

66
00:02:37,802 --> 00:02:39,154
whatever it is,

67
00:02:39,154 --> 00:02:41,316
and wrapped it in something else

68
00:02:41,316 --> 00:02:45,060
that is supported on this
wire and got it through?

69
00:02:45,060 --> 00:02:48,382
Now in the case of Ethernet
it's just point to point,

70
00:02:48,382 --> 00:02:51,587
right on Ethernet you and
I share an Ethernet wire

71
00:02:51,587 --> 00:02:53,768
so I encapsulated the Ethernet.

72
00:02:53,768 --> 00:02:55,487
Well let's take it one step further.

73
00:02:55,487 --> 00:02:59,513
Let's say that I have
a situation like this,

74
00:02:59,513 --> 00:03:03,680
where I have a couple of
routers on the end that have

75
00:03:05,087 --> 00:03:09,254
an IPv6 network but in the
middle there is no IPv6.

76
00:03:13,776 --> 00:03:18,181
Could I put an IPv6 packet
on this wire right here?

77
00:03:18,181 --> 00:03:22,663
No I couldn't because fast
Ethernet zero zero on R one

78
00:03:22,663 --> 00:03:24,980
doesn't even have an IPv6 address.

79
00:03:24,980 --> 00:03:28,014
That interface does not understand IPv6,

80
00:03:28,014 --> 00:03:31,459
and even if somehow I could
put an IPv6 packet on there,

81
00:03:31,459 --> 00:03:34,460
when it got to this device right here,

82
00:03:34,460 --> 00:03:36,094
he doesn't understand IPv6.

83
00:03:36,094 --> 00:03:40,457
There's no way I could
natively put an IPv6 packet

84
00:03:40,457 --> 00:03:43,658
from R one to R two because
the devices in the middle

85
00:03:43,658 --> 00:03:46,027
don't support IPv6.

86
00:03:46,027 --> 00:03:48,430
But, what if I could do this?

87
00:03:48,430 --> 00:03:50,626
What if I could take my IPv6 packet,

88
00:03:50,626 --> 00:03:54,793
so maybe on R one I type
ping 2001 two two two two,

89
00:03:56,206 --> 00:03:57,039
two two two two,

90
00:03:57,039 --> 00:03:58,219
two two two two,

91
00:03:58,219 --> 00:03:59,132
two two two two,

92
00:03:59,132 --> 00:04:00,610
colon colon two.

93
00:04:00,610 --> 00:04:02,674
So I'm doing an Ipv6 ping.

94
00:04:02,674 --> 00:04:04,578
In order to get that to go across,

95
00:04:04,578 --> 00:04:08,484
what if I took that IPv6
packet and at the front of it,

96
00:04:08,484 --> 00:04:10,234
I put an IPv4 header?

97
00:04:14,171 --> 00:04:15,439
An IPv4 header with

98
00:04:15,439 --> 00:04:17,502
one dot one dot one dot one

99
00:04:17,502 --> 00:04:18,891
as the source,

100
00:04:18,891 --> 00:04:21,616
and how about two dot two dot two dot two

101
00:04:21,616 --> 00:04:23,544
as the destination?

102
00:04:23,544 --> 00:04:25,477
That could go across that wire.

103
00:04:25,477 --> 00:04:27,640
That could go from router
one to router two because

104
00:04:27,640 --> 00:04:31,500
all these devices know how to route IPv4.

105
00:04:31,500 --> 00:04:34,417
That is what's called tunneling,

106
00:04:34,417 --> 00:04:37,416
where I create a tunnel and in
this case the two end points

107
00:04:37,416 --> 00:04:40,140
of the tunnel would be
router one and router two,

108
00:04:40,140 --> 00:04:44,307
and what this tunnel is doing
is it's taking information in

109
00:04:46,037 --> 00:04:49,942
that normally could not
go across this connection,

110
00:04:49,942 --> 00:04:53,481
and it's somehow wrapping
it in some additional header

111
00:04:53,481 --> 00:04:55,308
that my intermediary,

112
00:04:55,308 --> 00:04:59,637
my transit network does understand
and can carry it through,

113
00:04:59,637 --> 00:05:02,595
and then once it pops out
the other end of the tunnel,

114
00:05:02,595 --> 00:05:05,910
then we can strip off that
outer header revealing the

115
00:05:05,910 --> 00:05:08,186
native packet inside
and we can process it.

116
00:05:08,186 --> 00:05:11,130
That's what's called tunneling.

117
00:05:11,130 --> 00:05:13,094
Now there's a variety
of ways to do tunneling.

118
00:05:13,094 --> 00:05:15,312
A lot of times in a lot of devices,

119
00:05:15,312 --> 00:05:18,246
you will actually create
a tunnel interface

120
00:05:18,246 --> 00:05:20,414
just like we've talked
about loopback interfaces

121
00:05:20,414 --> 00:05:21,655
which are logical interfaces,

122
00:05:21,655 --> 00:05:23,813
we've talked about sub-interfaces

123
00:05:23,813 --> 00:05:25,850
which are logical interfaces,

124
00:05:25,850 --> 00:05:27,352
I've talked about dialer interfaces,

125
00:05:27,352 --> 00:05:30,183
well now we're gonna do
another logical interface

126
00:05:30,183 --> 00:05:33,981
that does not exist until you
create it by typing it in,

127
00:05:33,981 --> 00:05:36,517
which is an interface tunnel.

128
00:05:36,517 --> 00:05:39,616
Now when you create an interface tunnel,

129
00:05:39,616 --> 00:05:41,752
then the question is okay,

130
00:05:41,752 --> 00:05:44,211
well how is it going to
encapsulate something,

131
00:05:44,211 --> 00:05:45,326
what's it going to do?

132
00:05:45,326 --> 00:05:48,047
And there's a variety of ways to do that.

133
00:05:48,047 --> 00:05:50,781
And the default way that
tunnels encapsulate something

134
00:05:50,781 --> 00:05:54,948
is called Generic Route
Encapsulation which is GRE.

135
00:05:56,251 --> 00:05:58,251
So let's talk about GRE.

136
00:05:59,591 --> 00:06:01,204
So that's what GRE stands for,

137
00:06:01,204 --> 00:06:02,479
Generic Route Encapsulation,

138
00:06:02,479 --> 00:06:05,547
it is a standard way of doing tunneling,

139
00:06:05,547 --> 00:06:07,779
one of many ways of doing tunneling,

140
00:06:07,779 --> 00:06:10,578
as defined here in RFC 2784.

141
00:06:10,578 --> 00:06:11,700
You actually could probably read that,

142
00:06:11,700 --> 00:06:13,113
it's very short.

143
00:06:13,113 --> 00:06:16,328
The way GRE works is very very simple.

144
00:06:16,328 --> 00:06:17,637
So GRE,

145
00:06:17,637 --> 00:06:20,971
why is it called Generic
Route Encapsulation,

146
00:06:20,971 --> 00:06:22,350
because GRE says look,

147
00:06:22,350 --> 00:06:23,986
I don't care what's in the payload,

148
00:06:23,986 --> 00:06:26,045
what's in the payload is irrelevant to me,

149
00:06:26,045 --> 00:06:28,329
and I'm just gonna slap
a new header on that

150
00:06:28,329 --> 00:06:31,246
and then send it out onto the wire.

151
00:06:32,243 --> 00:06:36,410
So GRE basically has a
concept of an inner payload

152
00:06:39,137 --> 00:06:40,779
that it's carrying that it's wrapping,

153
00:06:40,779 --> 00:06:44,946
and then GRE itself relies
on some outer protocol,

154
00:06:46,075 --> 00:06:48,818
that's what we call the delivery protocol.

155
00:06:48,818 --> 00:06:51,030
Like in my example of what
I just drew right there,

156
00:06:51,030 --> 00:06:53,946
my inner protocol would be my IPv6 packet,

157
00:06:53,946 --> 00:06:56,905
and my outer or my
delivery protocol would be

158
00:06:56,905 --> 00:06:58,842
IP version four,

159
00:06:58,842 --> 00:07:01,874
and GRE would stick its
own special little header

160
00:07:01,874 --> 00:07:03,670
right in the middle.

161
00:07:03,670 --> 00:07:05,763
So this is what it would look like.

162
00:07:05,763 --> 00:07:06,887
So for example,

163
00:07:06,887 --> 00:07:11,136
if I was doing GRE in
the example I showed you,

164
00:07:11,136 --> 00:07:15,731
then I would have in my
IPv6 packet right here,

165
00:07:15,731 --> 00:07:19,134
with my IPv6 header and all that stuff,

166
00:07:19,134 --> 00:07:21,551
and then GRE adds this stuff.

167
00:07:23,604 --> 00:07:25,640
So GRE adds its own header,

168
00:07:25,640 --> 00:07:28,612
which is consisting of a protocol type,

169
00:07:28,612 --> 00:07:30,739
and the protocol type uses the exact same

170
00:07:30,739 --> 00:07:32,476
type values as Ethernet.

171
00:07:32,476 --> 00:07:33,665
So if you think about it okay,

172
00:07:33,665 --> 00:07:34,759
think about an Ethernet frame.

173
00:07:34,759 --> 00:07:37,161
If I send you an Ethernet frame and

174
00:07:37,161 --> 00:07:40,178
that Ethernet frame has IPv4 packet in it,

175
00:07:40,178 --> 00:07:43,196
and then right behind that I
send you another Ethernet frame

176
00:07:43,196 --> 00:07:44,514
that has an IPv6 packet,

177
00:07:44,514 --> 00:07:45,912
at layer two,

178
00:07:45,912 --> 00:07:49,299
how's your NIC card gonna
tell the difference?

179
00:07:49,299 --> 00:07:52,083
Well because in that
Ethernet frame in the header,

180
00:07:52,083 --> 00:07:54,008
there's an EtherType fact value,

181
00:07:54,008 --> 00:07:55,023
it's called the type code.

182
00:07:55,023 --> 00:07:56,696
And there's one type code that says,

183
00:07:56,696 --> 00:07:59,490
I'm an Ethernet frame
carrying IP version four.

184
00:07:59,490 --> 00:08:01,209
There's another type code that says,

185
00:08:01,209 --> 00:08:03,930
I'm an Ethernet frame
carrying IP version six.

186
00:08:03,930 --> 00:08:06,220
Well those numbers are
the exact same numbers

187
00:08:06,220 --> 00:08:10,460
I used right here in
the protocol type field.

188
00:08:10,460 --> 00:08:12,707
And then we have a version which is zero

189
00:08:12,707 --> 00:08:16,308
and then the flags which isn't
really used for anything,

190
00:08:16,308 --> 00:08:18,112
and then GRE says,

191
00:08:18,112 --> 00:08:19,481
I don't care what the delivery protocol is

192
00:08:19,481 --> 00:08:22,797
but usually the delivery
protocol is IP version four.

193
00:08:22,797 --> 00:08:24,840
So in the IP header,

194
00:08:24,840 --> 00:08:28,137
the protocol number well
instead of six for TCP

195
00:08:28,137 --> 00:08:29,304
or 17 for UDP,

196
00:08:30,274 --> 00:08:33,735
you would actually see
the protocol number 47.

197
00:08:33,735 --> 00:08:35,842
That means that behind this IP header,

198
00:08:35,842 --> 00:08:37,175
is a GRE header.

199
00:08:38,255 --> 00:08:39,925
So when you configure a tunnel interface,

200
00:08:39,925 --> 00:08:41,948
the defaulting encapsulation type

201
00:08:41,948 --> 00:08:43,393
if you don't specify anything else,

202
00:08:43,393 --> 00:08:44,908
will be this,

203
00:08:44,908 --> 00:08:46,158
it will be GRE.

204
00:08:47,109 --> 00:08:49,675
And configuring a tunnel
interface is really simple.

205
00:08:49,675 --> 00:08:54,455
You just type interface tunnel
and you give it a number.

206
00:08:54,455 --> 00:08:55,505
For example,

207
00:08:55,505 --> 00:08:56,743
when you create a loopback interface,

208
00:08:56,743 --> 00:08:57,921
does a number really matter?

209
00:08:57,921 --> 00:08:59,169
No.

210
00:08:59,169 --> 00:09:01,545
Most people usually start
with interface loopback zero

211
00:09:01,545 --> 00:09:03,454
or interface loopback one but hey,

212
00:09:03,454 --> 00:09:05,316
there's nothing stopping you from

213
00:09:05,316 --> 00:09:07,849
creating interface loopback 99.

214
00:09:07,849 --> 00:09:08,952
Same thing here.

215
00:09:08,952 --> 00:09:11,234
Might as well start with
interface tunnel zero,

216
00:09:11,234 --> 00:09:13,348
but you can put any number
after that that you want.

217
00:09:13,348 --> 00:09:14,380
And yes,

218
00:09:14,380 --> 00:09:16,646
just like you can have
multiple loopback interfaces

219
00:09:16,646 --> 00:09:17,842
in a router,

220
00:09:17,842 --> 00:09:19,185
you could have multiple tunnel interfaces

221
00:09:19,185 --> 00:09:21,149
in a router as well.

222
00:09:21,149 --> 00:09:23,513
Now, the question you
have to ask yourself is,

223
00:09:23,513 --> 00:09:27,680
what kind of data is gonna be
in the payload of this tunnel?

224
00:09:29,173 --> 00:09:31,304
What is this tunnel gonna be carrying?

225
00:09:31,304 --> 00:09:32,361
In my example I said,

226
00:09:32,361 --> 00:09:35,583
Well, I'm gonna want IPv6 packets tunneled

227
00:09:35,583 --> 00:09:38,747
across an IP version four cloud.

228
00:09:38,747 --> 00:09:41,613
So, Ipv6 is gonna be in the payload

229
00:09:41,613 --> 00:09:43,382
of what's being tunneled.

230
00:09:43,382 --> 00:09:45,279
So if it's IPv6,

231
00:09:45,279 --> 00:09:49,774
then I would need an IPv6
address on my tunnel interface.

232
00:09:49,774 --> 00:09:53,915
If I plan on taking IPv4
packets and tunneling them,

233
00:09:53,915 --> 00:09:56,629
then I would need IPv4 address.

234
00:09:56,629 --> 00:09:58,282
Here's a key thing to think about.

235
00:09:58,282 --> 00:09:59,952
Remember this basic rule,

236
00:09:59,952 --> 00:10:01,552
that an interface,

237
00:10:01,552 --> 00:10:02,579
whether it be a logical interface

238
00:10:02,579 --> 00:10:04,653
like a loopback or a tunnel,

239
00:10:04,653 --> 00:10:08,156
or a physical interface like
a fast Ethernet or a serial,

240
00:10:08,156 --> 00:10:11,690
an interface in order to
carry some sort of protocol,

241
00:10:11,690 --> 00:10:13,023
like IPv4, IPv6,

242
00:10:14,745 --> 00:10:18,598
has to have an address for
that protocol on itself.

243
00:10:18,598 --> 00:10:21,220
In other words if I
create an interface tunnel

244
00:10:21,220 --> 00:10:23,747
and I don't enable it for IPv6,

245
00:10:23,747 --> 00:10:25,822
I don't put an IPv6 address on there,

246
00:10:25,822 --> 00:10:28,688
there is no way IPv6 packets will ever use

247
00:10:28,688 --> 00:10:32,804
that tunnel interface because
it doesn't know what IPv6 is.

248
00:10:32,804 --> 00:10:36,971
Now the second step in
creating my tunnel interface.

249
00:10:37,947 --> 00:10:41,662
So I'm gonna have my tunnel interface,

250
00:10:41,662 --> 00:10:44,662
and we know that some sort of data's

251
00:10:46,909 --> 00:10:47,953
going to be going across here,

252
00:10:47,953 --> 00:10:49,879
in my case it was IPv6,

253
00:10:49,879 --> 00:10:53,481
and we know that the tunnel
itself in order to transport it,

254
00:10:53,481 --> 00:10:57,635
is gonna slap on there some
sort of destination address

255
00:10:57,635 --> 00:11:00,302
and some sort of source address.

256
00:11:01,418 --> 00:11:05,703
Now my particular case is
gonna be a source IPv4 address,

257
00:11:05,703 --> 00:11:08,167
and a destination IPv4 address.

258
00:11:08,167 --> 00:11:09,873
So there's gonna be some router here,

259
00:11:09,873 --> 00:11:12,149
we'll just say router A,

260
00:11:12,149 --> 00:11:14,584
some router here which is router B,

261
00:11:14,584 --> 00:11:15,684
and some routers in the middle

262
00:11:15,684 --> 00:11:18,506
which are just carrying this packet.

263
00:11:18,506 --> 00:11:22,154
So the source IP address
is gonna have to be

264
00:11:22,154 --> 00:11:26,517
some IP address on router A
because he's sourcing a tunnel.

265
00:11:26,517 --> 00:11:29,657
The destination IP address
is gonna have to be

266
00:11:29,657 --> 00:11:32,355
some IP address on router B,

267
00:11:32,355 --> 00:11:35,102
because that's where
tunnel destination is,

268
00:11:35,102 --> 00:11:36,098
that's where it's ending.

269
00:11:36,098 --> 00:11:40,461
So the commands we actually
use for that are tunnel source,

270
00:11:40,461 --> 00:11:42,367
and you can either reference an IP address

271
00:11:42,367 --> 00:11:44,336
on your router itself,

272
00:11:44,336 --> 00:11:45,937
or you can reference an interface,

273
00:11:45,937 --> 00:11:49,343
say okay on my router all these
packets are gonna be leaving

274
00:11:49,343 --> 00:11:51,115
fast Ethernet zero zero,

275
00:11:51,115 --> 00:11:53,341
so why don't I just
borrow the IP address of

276
00:11:53,341 --> 00:11:55,766
fast Ethernet zero zero
as my tunnel source,

277
00:11:55,766 --> 00:11:57,023
so you can do that,

278
00:11:57,023 --> 00:11:59,726
tunnel source, interface,
fast Ethernet zero zero.

279
00:11:59,726 --> 00:12:02,808
And then you're gonna use the
tunnel destination command,

280
00:12:02,808 --> 00:12:05,772
which gives the IP address
of the destination.

281
00:12:05,772 --> 00:12:07,709
So let's do a real example of this,

282
00:12:07,709 --> 00:12:11,297
so this typology I actually
already have set up,

283
00:12:11,297 --> 00:12:13,651
I've already pre-configured everything,

284
00:12:13,651 --> 00:12:17,818
and my objective here is I
want router one to be able to

285
00:12:19,423 --> 00:12:22,256
IPv6 ping this address right here.

286
00:12:23,277 --> 00:12:24,194
Problem is,

287
00:12:25,172 --> 00:12:28,007
I don't have any IPv6 in the middle,

288
00:12:28,007 --> 00:12:30,551
so I need to create a tunnel between

289
00:12:30,551 --> 00:12:32,718
router one and router two.

290
00:12:35,727 --> 00:12:37,253
So on router one,

291
00:12:37,253 --> 00:12:40,253
I'm gonna create an interface tunnel

292
00:12:43,197 --> 00:12:46,864
and I'll just give it
interface tunnel zero,

293
00:12:49,568 --> 00:12:54,040
and now if I want this
tunnel to carry IPv6 traffic,

294
00:12:54,040 --> 00:12:55,680
it has to understand IPv6,

295
00:12:55,680 --> 00:12:57,312
so I have a choice.

296
00:12:57,312 --> 00:13:00,105
I could come up with a
completely different IPv6 address

297
00:13:00,105 --> 00:13:01,539
and put it on the tunnel,

298
00:13:01,539 --> 00:13:04,427
but one thing nice about IPv6,

299
00:13:04,427 --> 00:13:06,106
I can just enable IPv6,

300
00:13:06,106 --> 00:13:08,106
I could say IPv6 enable,

301
00:13:10,460 --> 00:13:14,627
and that will create a
link-local address on my tunnel

302
00:13:16,106 --> 00:13:17,523
and FE80 address.

303
00:13:19,304 --> 00:13:22,637
And then I'm gonna have a tunnel source,

304
00:13:23,487 --> 00:13:27,288
let me expand this a little bit here,

305
00:13:27,288 --> 00:13:28,455
tunnel source,

306
00:13:29,545 --> 00:13:33,712
and I'm just gonna point
to fast Ethernet zero zero.

307
00:13:35,644 --> 00:13:37,074
In other words I'm gonna
be telling router one

308
00:13:37,074 --> 00:13:39,574
okay, when you take your IPv6 packets

309
00:13:39,574 --> 00:13:42,636
and you apply a GRE header,

310
00:13:42,636 --> 00:13:45,992
and then in front of the GRE
header you add a IP header,

311
00:13:45,992 --> 00:13:48,930
I want the source address
to be one one one one,

312
00:13:48,930 --> 00:13:50,976
what we see right here.

313
00:13:50,976 --> 00:13:55,143
And then I'm gonna have a tunnel
destination of router two.

314
00:13:58,100 --> 00:14:02,267
Tunnel destination is going
to be two two two two.

315
00:14:05,798 --> 00:14:07,129
So just those three commands,

316
00:14:07,129 --> 00:14:08,837
actually those four commands,

317
00:14:08,837 --> 00:14:09,923
creating the tunnel in the first place,

318
00:14:09,923 --> 00:14:12,340
enabling the tunnel for IPV6,

319
00:14:13,743 --> 00:14:16,250
saying my source is
fast Ethernet zero zero,

320
00:14:16,250 --> 00:14:18,138
my destination is two two two two,

321
00:14:18,138 --> 00:14:20,147
and then there's one
other thing I have to do.

322
00:14:20,147 --> 00:14:24,426
If I want to be able to
ping this IPv6 network,

323
00:14:24,426 --> 00:14:26,311
R one has to learn about it.

324
00:14:26,311 --> 00:14:27,977
So across the tunnel,

325
00:14:27,977 --> 00:14:31,560
I'm actually gonna be
running EIGRP for V6.

326
00:14:36,711 --> 00:14:39,129
I will actually form an EIGRP relationship

327
00:14:39,129 --> 00:14:41,980
between router one and router
two across this tunnel.

328
00:14:41,980 --> 00:14:44,563
So I'll enable EIGRPv6 on here,

329
00:14:45,449 --> 00:14:47,222
and then I'm gonna
replicate that same thing

330
00:14:47,222 --> 00:14:49,709
but in reverse on router two.

331
00:14:49,709 --> 00:14:51,515
I'll create a tunnel
interface on router two,

332
00:14:51,515 --> 00:14:54,353
I will also say IPv6 enable,

333
00:14:54,353 --> 00:14:58,649
I'll say tunnel source will
be his fast Ethernet zero one,

334
00:14:58,649 --> 00:15:02,026
so that he uses two two two
two as the source IP address,

335
00:15:02,026 --> 00:15:05,406
tunnel destination will
be one one one one,

336
00:15:05,406 --> 00:15:09,573
and then I'll enable IPv6
EIGRP on his tunnel interface.

337
00:15:11,005 --> 00:15:13,301
So let me go ahead and build that and

338
00:15:13,301 --> 00:15:15,301
show you how that works.

339
00:15:19,277 --> 00:15:23,444
Okay, so let's start by
taking a look at router one.

340
00:15:24,877 --> 00:15:28,044
Let's look at my configuration so far.

341
00:15:29,825 --> 00:15:31,242
So on router one,

342
00:15:32,608 --> 00:15:36,775
I have my loopback address and
I'm gonna want EIGRP for IPv6

343
00:15:39,005 --> 00:15:42,508
to advertise that loopback
once my tunnel is built.

344
00:15:42,508 --> 00:15:45,283
I have not created any tunnel yet.

345
00:15:45,283 --> 00:15:47,045
And then here's the physical
interface that's gonna be

346
00:15:47,045 --> 00:15:48,712
carrying that tunnel traffic,

347
00:15:48,712 --> 00:15:50,686
fast Ethernet zero zero.

348
00:15:50,686 --> 00:15:54,282
So let's go ahead and build
the tunnel on this side.

349
00:15:54,282 --> 00:15:55,699
Interface tunnel,

350
00:15:56,781 --> 00:15:58,273
and you can see here I've got a

351
00:15:58,273 --> 00:15:59,350
wide range of numbers I could choose from,

352
00:15:59,350 --> 00:16:03,350
I'm just gonna start with
interface tunnel zero.

353
00:16:04,721 --> 00:16:07,142
Now, let's just stop right there.

354
00:16:07,142 --> 00:16:08,678
No other configuration.

355
00:16:08,678 --> 00:16:10,928
Show interface tunnel zero.

356
00:16:15,769 --> 00:16:17,919
So right now it's down because

357
00:16:17,919 --> 00:16:19,680
I haven't given it the
necessary information,

358
00:16:19,680 --> 00:16:21,650
I haven't told what the source is yet,

359
00:16:21,650 --> 00:16:23,647
I haven't told what
the destination is yet,

360
00:16:23,647 --> 00:16:24,696
but look at this.

361
00:16:24,696 --> 00:16:26,613
Tunnel protocol is GRE.

362
00:16:28,226 --> 00:16:30,652
Transport method is IP.

363
00:16:30,652 --> 00:16:32,246
So this is saying by default,

364
00:16:32,246 --> 00:16:34,416
it's gonna use IP version four

365
00:16:34,416 --> 00:16:35,684
as the source and destination,

366
00:16:35,684 --> 00:16:38,147
I just haven't told it
what addresses to use yet,

367
00:16:38,147 --> 00:16:41,065
and then behind the IP
version four header,

368
00:16:41,065 --> 00:16:45,232
it's gonna create that
additional GRE header as well.

369
00:16:46,114 --> 00:16:47,748
So let's finish out my
configuration of that

370
00:16:47,748 --> 00:16:49,581
interface tunnel zero,

371
00:16:51,824 --> 00:16:53,918
so I'll say tunnel source and

372
00:16:53,918 --> 00:16:57,118
according to my picture right here,

373
00:16:57,118 --> 00:16:59,903
I want the tunnel source to
be fast Ethernet zero zero,

374
00:16:59,903 --> 00:17:01,483
I want you to borrow that IP address

375
00:17:01,483 --> 00:17:03,650
as your source IP address.

376
00:17:07,384 --> 00:17:09,382
Tunnel destination,

377
00:17:09,382 --> 00:17:10,977
this destination of
your packets is gonna be

378
00:17:10,977 --> 00:17:13,310
two dot two dot two dot two,

379
00:17:18,753 --> 00:17:21,225
and now that I've given it
a source and destination,

380
00:17:21,225 --> 00:17:22,848
the tunnel came up.

381
00:17:22,848 --> 00:17:24,481
Now it's not fully up yet because

382
00:17:24,481 --> 00:17:27,769
I haven't configured the other side.

383
00:17:27,769 --> 00:17:31,318
Now if I want IPv6 to go across
that I have to enable IPv6,

384
00:17:31,318 --> 00:17:33,092
I could give it an IPv6 address,

385
00:17:33,092 --> 00:17:36,009
but I'm just gonna say IPv6 enable,

386
00:17:37,517 --> 00:17:40,206
because if I want EIGRP running
across this tunnel remember,

387
00:17:40,206 --> 00:17:44,785
your IPv6 routing protocols
like EIGRP and OSPF,

388
00:17:44,785 --> 00:17:46,474
they form neighbor relationships

389
00:17:46,474 --> 00:17:48,857
with their link-local addresses.

390
00:17:48,857 --> 00:17:52,104
I don't even need a
global address to form a

391
00:17:52,104 --> 00:17:54,156
neighbor relationship between two routers

392
00:17:54,156 --> 00:17:57,719
running an EIGRP or OSPF for IPv6.

393
00:17:57,719 --> 00:18:00,217
So I'm just gonna enable that and then,

394
00:18:00,217 --> 00:18:02,550
I'm gonna enable IPv6 EIGRP.

395
00:18:06,477 --> 00:18:08,387
So before I complete the tunnel

396
00:18:08,387 --> 00:18:10,185
on the other side on router two,

397
00:18:10,185 --> 00:18:13,185
let's look at what I've done so far.

398
00:18:16,532 --> 00:18:18,122
Okay so I've got my loopback here,

399
00:18:18,122 --> 00:18:22,136
I've already got that
included in my EIGRP process,

400
00:18:22,136 --> 00:18:24,953
now I've created my tunnel interface,

401
00:18:24,953 --> 00:18:29,120
I said I'm allowing you to have
IPv6 run across this tunnel,

402
00:18:30,456 --> 00:18:33,084
I'm allowing you to have
EIGRP run across the tunnel,

403
00:18:33,084 --> 00:18:35,392
so whoever's at the
other end of the tunnel,

404
00:18:35,392 --> 00:18:38,187
if they're also participating in EIGRP

405
00:18:38,187 --> 00:18:39,731
autonomous-system 100,

406
00:18:39,731 --> 00:18:41,824
you can talk to them,

407
00:18:41,824 --> 00:18:44,253
and then I have my tunnel source
as being the fast Ethernet

408
00:18:44,253 --> 00:18:46,456
and the tunnel destination being R two

409
00:18:46,456 --> 00:18:48,373
over on the other side.

410
00:18:49,331 --> 00:18:53,498
So, let's go ahead and I'm
just gonna copy all that,

411
00:18:55,652 --> 00:19:00,450
and I'm gonna go over to
R two on the other side.

412
00:19:00,450 --> 00:19:01,620
I'm gonna paste it in and

413
00:19:01,620 --> 00:19:04,620
just make a couple of minor changes.

414
00:19:06,986 --> 00:19:08,659
Okay so number one.

415
00:19:08,659 --> 00:19:12,125
Tunnel destination's not
going to be two two two two,

416
00:19:12,125 --> 00:19:15,150
so now my tunnel destination
is gonna be pointing back to

417
00:19:15,150 --> 00:19:16,483
one one one one,

418
00:19:20,687 --> 00:19:23,288
and my tunnel source is not gonna be

419
00:19:23,288 --> 00:19:25,288
fast Ethernet zero zero,

420
00:19:26,838 --> 00:19:31,005
my tunnel source is gonna be
fast Ethernet zero slash one.

421
00:19:39,482 --> 00:19:40,923
And there we go look at that.

422
00:19:40,923 --> 00:19:42,557
Not only did the tunnel come up,

423
00:19:42,557 --> 00:19:45,823
by my EIGRP neighbor
relationship across that tunnel

424
00:19:45,823 --> 00:19:47,567
immediately came up as well.

425
00:19:47,567 --> 00:19:49,650
Show IPv6 EIGRP neighbor,

426
00:19:54,183 --> 00:19:55,922
and we can see that I
have formed a neighbor

427
00:19:55,922 --> 00:19:58,765
across my tunnel interface.

428
00:19:58,765 --> 00:20:00,328
How do I know it actually worked?

429
00:20:00,328 --> 00:20:01,661
Show IPv6 route,

430
00:20:04,036 --> 00:20:07,988
and we can see that I learned
of the loopback interface of

431
00:20:07,988 --> 00:20:10,488
router one across that tunnel,

432
00:20:12,062 --> 00:20:13,971
the tunnel interface is the next hop,

433
00:20:13,971 --> 00:20:15,470
and now I can ping it.

434
00:20:15,470 --> 00:20:19,025
from router two I can ping the IPv6,

435
00:20:19,025 --> 00:20:22,792
the loopback interface of router one,

436
00:20:22,792 --> 00:20:27,459
and that's because it's
going across the tunnel.

437
00:20:27,459 --> 00:20:29,626
If I do a debug IP packet,

438
00:20:31,858 --> 00:20:34,108
and then do that same ping,

439
00:20:39,258 --> 00:20:42,258
let's turn off the debug packet now.

440
00:20:48,323 --> 00:20:51,285
Okay, so here was my IPv6 ping,

441
00:20:51,285 --> 00:20:53,118
and notice it created,

442
00:20:53,996 --> 00:20:58,256
so this is OSPF because
actually I have OSPF

443
00:20:58,256 --> 00:20:59,923
running across IPv4,

444
00:21:01,094 --> 00:21:03,071
that's how router one even knew how to

445
00:21:03,071 --> 00:21:04,903
get to two two two two,

446
00:21:04,903 --> 00:21:06,413
and that's how router two even knew how to

447
00:21:06,413 --> 00:21:07,436
get to one one one one,

448
00:21:07,436 --> 00:21:10,453
if I did not have reachability
of my tunnel endpoints,

449
00:21:10,453 --> 00:21:11,655
it would be pointless,

450
00:21:11,655 --> 00:21:14,190
so I had to have some sort
of routing protocol running

451
00:21:14,190 --> 00:21:17,207
between all four devices
so my tunnel endpoints

452
00:21:17,207 --> 00:21:19,457
could actually reach other,

453
00:21:20,324 --> 00:21:21,512
but here we see.

454
00:21:21,512 --> 00:21:25,679
Here is my IPv6 packet is
actually inside of that,

455
00:21:28,141 --> 00:21:31,102
and actually I think we
could do even more if I do,

456
00:21:31,102 --> 00:21:32,269
let's do this,

457
00:21:33,501 --> 00:21:37,668
debug IP packet detail and
then do the ping again,

458
00:21:41,293 --> 00:21:42,315
ugh.

459
00:21:42,315 --> 00:21:44,232
Debug IP packet detail,

460
00:21:49,475 --> 00:21:52,491
come on, where is that ping?

461
00:21:52,491 --> 00:21:53,491
There we go.

462
00:21:58,201 --> 00:21:59,368
So right here.

463
00:22:01,258 --> 00:22:03,341
Come on stop, stop, stop!

464
00:22:05,326 --> 00:22:06,318
Un all,

465
00:22:06,318 --> 00:22:07,151
okay.

466
00:22:08,796 --> 00:22:11,112
So this is what I'm looking for.

467
00:22:11,112 --> 00:22:12,925
Now we can actually
see the protocol field,

468
00:22:12,925 --> 00:22:14,971
notice protocol 47.

469
00:22:14,971 --> 00:22:18,308
That is the protocol
that's reserved for GRE.

470
00:22:18,308 --> 00:22:19,338
So this is me,

471
00:22:19,338 --> 00:22:23,364
router two sending an IPv version
four packet to router one,

472
00:22:23,364 --> 00:22:25,738
but the protocol is 47.

473
00:22:25,738 --> 00:22:26,949
So when router one gets that,

474
00:22:26,949 --> 00:22:27,966
he'll say,

475
00:22:27,966 --> 00:22:28,980
Oh, 47,

476
00:22:28,980 --> 00:22:31,060
I need to redirect that
to my tunnel interface

477
00:22:31,060 --> 00:22:34,050
because that's the one
that's actually doing GRE.

478
00:22:34,050 --> 00:22:36,167
And then the tunnel
interface will strip off this

479
00:22:36,167 --> 00:22:37,845
IP version four header,

480
00:22:37,845 --> 00:22:40,323
revealing the IPv6 inside,

481
00:22:40,323 --> 00:22:43,823
and that's why my IPv6 ping is successful,

482
00:22:45,659 --> 00:22:48,127
which is way up here.

483
00:22:48,127 --> 00:22:51,227
That shows my successful IPv6 ping.

484
00:22:51,227 --> 00:22:54,189
So that concludes this discussion of

485
00:22:54,189 --> 00:22:56,189
configuring GRE tunnels.

486
00:22:57,401 --> 00:23:00,151
(dramatic music)

