WEBVTT

0:00:08.180000 --> 0:00:12.340000
 So at this point I'm assuming that you've
 downloaded the GNS3 executable

0:00:12.340000 --> 0:00:17.360000
 file, the application, and you've also
 downloaded at least one Cisco iOS

0:00:17.360000 --> 0:00:22.300000
 software image. So now we're going to
 open up that executable file from

0:00:22.300000 --> 0:00:26.300000
 GNS3 and I'm going to go through something
 called the setup wizard which

0:00:26.300000 --> 0:00:31.480000
 is a series of steps you have to go through
 to get GNS3 fully up and working.

0:00:31.480000 --> 0:00:35.100000
 Now there's actually quite a lot to
 talk about during the setup phase

0:00:35.100000 --> 0:00:38.380000
 here so I'm going to divide this into
 two videos and this is going to

0:00:38.380000 --> 0:00:41.120000
 be part one of that series.

0:00:41.120000 --> 0:00:49.980000
 So let's start with unpacking that
 executable for that GNS3 file.

0:00:49.980000 --> 0:00:58.640000
 So in my particular case I've downloaded
 GNS3 right here to this GNS3

0:00:58.640000 --> 0:01:02.700000
 file and you can see I've got various
 flavors of it as of this recording

0:01:02.700000 --> 0:01:07.640000
 version 1.4.4 is the most
 recent version of GNS3.

0:01:07.640000 --> 0:01:14.020000
 So I'm just going to go ahead and double
 click on that and it brings me

0:01:14.020000 --> 0:01:22.820000
 to the very first I will agree to the
 license and I will let GNS3 install

0:01:22.820000 --> 0:01:24.560000
 where it wants to.

0:01:24.560000 --> 0:01:28.340000
 Okay so here's what I want to spend
 a little bit of time if you are like

0:01:28.340000 --> 0:01:32.040000
 me and when you get something like
 this that wants to install a bunch

0:01:32.040000 --> 0:01:35.880000
 of stuff on your system you might want
 to know what all of these things

0:01:35.880000 --> 0:01:39.600000
 are and if they're mandatory
 and what they do.

0:01:39.600000 --> 0:01:42.720000
 So let me just spend a little bit of
 time talking about each one of these

0:01:42.720000 --> 0:01:45.280000
 things. Let's start with Win PCAP.


0:01:45.280000 --> 0:01:47.860000
 Win PCAP is simply a driver.

0:01:47.860000 --> 0:01:52.360000
 It connects to your NIT card and it allows
 your NIT card to capture every

0:01:52.360000 --> 0:01:56.720000
 single Ethernet frame it sees and then
 send those Ethernet frames to some

0:01:56.720000 --> 0:02:01.200000
 sort of application like maybe wire
 shark or some other kind of packet

0:02:01.200000 --> 0:02:03.160000
 sniffing application.

0:02:03.160000 --> 0:02:06.320000
 So it puts your NIT card into what's
 called promiscuous mode.

0:02:06.320000 --> 0:02:10.240000
 Without Win PCAP your sniffing
 program wouldn't do anything.

0:02:10.240000 --> 0:02:13.120000
 It wouldn't be able
 to capture anything.

0:02:13.120000 --> 0:02:17.360000
 Or I should say it would only be able
 to capture files are sent to you.

0:02:17.360000 --> 0:02:21.260000
 In other words Ethernet frames are sent
 directly to your laptop and broadcast

0:02:21.260000 --> 0:02:26.020000
 frames. Any other Ethernet frames that
 your Ethernet card sees it normally

0:02:26.020000 --> 0:02:28.280000
 ignores those frames
 it discards them.

0:02:28.280000 --> 0:02:31.840000
 Well with Win PCAP it has the ability
 to actually collect everything it

0:02:31.840000 --> 0:02:34.220000
 sees and then send
 it to wire shark.

0:02:34.220000 --> 0:02:40.340000
 Wire shark is a packet sniffing tool
 if you've never actually seen wire

0:02:40.340000 --> 0:02:43.480000
 shark before. This is an example
 of what it looks like.

0:02:43.480000 --> 0:02:47.240000
 After you've done a capture you can
 see every single frame that your NIT

0:02:47.240000 --> 0:02:52.260000
 card has collected and when you and
 you can open up these things you can

0:02:52.260000 --> 0:02:55.880000
 see every single field within
 every single header.

0:02:55.880000 --> 0:02:58.760000
 And this is a great useful tool when
 you're learning about networking

0:02:58.760000 --> 0:03:04.620000
 protocols. There's no better way to
 learn about how OSPF works or how

0:03:04.620000 --> 0:03:09.260000
 RIP works than by actually seeing the
 packets capturing them and seeing

0:03:09.260000 --> 0:03:11.140000
 every single field in there.

0:03:11.140000 --> 0:03:15.640000
 Seeing when a packet generates or triggers
 another packet in response

0:03:15.640000 --> 0:03:19.240000
 and a packet sniffing tool like wire
 shark and there are others out there

0:03:19.240000 --> 0:03:22.080000
 as well is a great
 tool to do that.

0:03:22.080000 --> 0:03:25.560000
 Now along with this when you capture
 your files now you might be wondering

0:03:25.560000 --> 0:03:28.920000
 well what's wire shark
 have to do with GNS3?

0:03:28.920000 --> 0:03:32.720000
 Because GNS3 is creating a virtual
 networking topology.

0:03:32.720000 --> 0:03:36.020000
 I'm not dealing with real routers
 with real cables here.

0:03:36.020000 --> 0:03:39.780000
 Well the nice thing about this is because
 GNS3 is bundled in I should

0:03:39.780000 --> 0:03:43.720000
 say wire shark is bundled
 into the GNS3 download.

0:03:43.720000 --> 0:03:47.540000
 Once you create your virtual topology
 of your routers connected via serial

0:03:47.540000 --> 0:03:52.020000
 interfaces or ethernet interfaces or
 whatever they are you can right click

0:03:52.020000 --> 0:03:54.120000
 on any router. I'll show
 you how to do this.

0:03:54.120000 --> 0:03:57.960000
 And there's a capture option you select
 which interface you want you could

0:03:57.960000 --> 0:04:00.620000
 capture off of serial interfaces
 if you want to.

0:04:00.620000 --> 0:04:03.960000
 And then it actually captures all the
 packets on that interface and displays

0:04:03.960000 --> 0:04:05.880000
 them in wire shark.

0:04:05.880000 --> 0:04:09.980000
 Now where this is really totally cool
 and useful is imagine you had real

0:04:09.980000 --> 0:04:11.620000
 routers in a real lab.

0:04:11.620000 --> 0:04:15.060000
 Okay and they were all cabled up via
 ethernet or serial interfaces.

0:04:15.060000 --> 0:04:18.880000
 How would you actually capture
 packets in that environment?

0:04:18.880000 --> 0:04:23.140000
 Well one way is you'd have to like purchase
 a hub and ethernet hub install

0:04:23.140000 --> 0:04:28.760000
 it in between two routers connect your
 PC to that hub and then your PC

0:04:28.760000 --> 0:04:31.420000
 would have the ability to see all the
 packets going back and forth between

0:04:31.420000 --> 0:04:34.760000
 those routers. That's great if
 you're talking about ethernet.

0:04:34.760000 --> 0:04:38.260000
 But what if I want to capture stuff
 on a serial link like if I want to

0:04:38.260000 --> 0:04:42.220000
 see what frame relay headers look like
 or what PPP headers look like.

0:04:42.220000 --> 0:04:45.800000
 Can't do that with a hub kind of hard
 with a back to back serial cable

0:04:45.800000 --> 0:04:47.380000
 to capture that stuff.

0:04:47.380000 --> 0:04:52.260000
 But here in the GNS3 virtual environment
 it's so easy to do so.

0:04:52.260000 --> 0:04:55.140000
 Now the other thing you're going to
 want to do is once you capture your

0:04:55.140000 --> 0:04:56.820000
 various files you're going
 to want to save them.

0:04:56.820000 --> 0:04:59.280000
 You know just click
 file and save as.

0:04:59.280000 --> 0:05:03.800000
 And the reason for that is because you
 will see here in addition to wire

0:05:03.800000 --> 0:05:09.540000
 shark the GNS3 application downloads
 the solar winds response time viewer.

0:05:09.540000 --> 0:05:14.960000
 And what that does is with that tool
 you can import your capture file

0:05:14.960000 --> 0:05:20.340000
 that you got from wire shark
 and then click on analyze.

0:05:20.340000 --> 0:05:24.040000
 And it just takes a couple of moments
 here and what this does is it takes

0:05:24.040000 --> 0:05:29.360000
 all the traffic that wire shark created
 and sort of sorts it and categorizes

0:05:29.360000 --> 0:05:32.360000
 it by different high level categories
 you can see here.

0:05:32.360000 --> 0:05:35.660000
 And if you highlight one of these or
 if you just actually mouse over it

0:05:35.660000 --> 0:05:39.560000
 you can see you get a lot more detailed
 information about the average

0:05:39.560000 --> 0:05:43.760000
 network response time the average
 application response time.

0:05:43.760000 --> 0:05:47.720000
 So this is also a really great tool
 to just get a high level snapshot

0:05:47.720000 --> 0:05:51.700000
 of what's going on not only in your
 virtual environment but you can use

0:05:51.700000 --> 0:05:55.180000
 this in a real network as well to see
 you know what's going on in my network

0:05:55.180000 --> 0:05:59.720000
 is there stuff going across my cable
 that I didn't expect to be there.

0:05:59.720000 --> 0:06:04.360000
 So the solar winds response time viewer
 is a great tool for that purpose.

0:06:04.360000 --> 0:06:09.460000
 In addition to that you get dynamite dynamips
 have to have dynamips dynamips

0:06:09.460000 --> 0:06:13.500000
 is the engine that creates your emulated
 router so that's got to be in

0:06:13.500000 --> 0:06:17.320000
 there. And then you've got chemo I'm
 not really going to talk about chemo

0:06:17.320000 --> 0:06:22.240000
 that's really for people who like virtualizing
 their you know using like

0:06:22.240000 --> 0:06:28.280000
 a virtual machine like if you want to
 have GNS 3 running with VMware or

0:06:28.280000 --> 0:06:32.040000
 virtual box or something then this
 whole chemo thing gets involved but

0:06:32.040000 --> 0:06:35.260000
 I'm not going to go into that in this
 sort of basic tutorial video right

0:06:35.260000 --> 0:06:40.160000
 here. Now the next thing but you will
 want to include don't uncheck it

0:06:40.160000 --> 0:06:43.820000
 just leave chemo checked as it is because
 later on you might want to use

0:06:43.820000 --> 0:06:45.280000
 that in your studies.

0:06:45.280000 --> 0:06:51.080000
 VPCS awesome tool this stands
 for the virtual PC simulator.

0:06:51.080000 --> 0:06:54.580000
 So when you create your network topology
 within GNS 3 of your routers

0:06:54.580000 --> 0:06:58.600000
 connected to each other you might want
 to have some PCs connected to those

0:06:58.600000 --> 0:07:02.560000
 routers. For example maybe you need
 something to generate traffic maybe

0:07:02.560000 --> 0:07:08.120000
 UDP traffic or TCP traffic or ICMP
 traffic going through those routers

0:07:08.120000 --> 0:07:11.680000
 because you want that traffic to go
 through the routers and maybe you

0:07:11.680000 --> 0:07:14.920000
 want to test out your access list to
 see if they're actually working as

0:07:14.920000 --> 0:07:18.820000
 you expect or you want to test out
 your quality of service policies to

0:07:18.820000 --> 0:07:21.360000
 see if they're working
 as you expect.

0:07:21.360000 --> 0:07:26.040000
 Well VPCS the virtual PC simulator
 is a great tool for doing that you

0:07:26.040000 --> 0:07:29.660000
 can just drop these virtual PCs into
 your network connect them to your

0:07:29.660000 --> 0:07:33.340000
 routers and then the virtual PCs you
 can tell them start a UDP traffic

0:07:33.340000 --> 0:07:37.160000
 stream start a TCP traffic stream and
 you can select like the port numbers

0:07:37.160000 --> 0:07:41.200000
 and all kinds of stuff which is a great
 tool for testing simple stuff

0:07:41.200000 --> 0:07:43.680000
 in your GNS 3 virtual topology.

0:07:43.680000 --> 0:07:48.520000
 So fortunately for us that is built in
 CPU limit is just a little program

0:07:48.520000 --> 0:07:53.180000
 that like it sounds it sort of helps
 GNS 3 to work with your CPU so it

0:07:53.180000 --> 0:07:56.800000
 doesn't consume too
 many CPU resources.

0:07:56.800000 --> 0:08:01.080000
 Then of course you have the GNS 3 application
 itself got to have that

0:08:01.080000 --> 0:08:04.520000
 in there and it also comes bundled
 in with super putty.

0:08:04.520000 --> 0:08:10.140000
 Now when you're working with the Cisco
 iOS command line you have to have

0:08:10.140000 --> 0:08:14.660000
 some application to display that command
 line we call that a terminal

0:08:14.660000 --> 0:08:18.520000
 application and there's lots of terminal
 applications out there but super

0:08:18.520000 --> 0:08:22.560000
 putty is one example of a terminal application
 it comes bundled in here

0:08:22.560000 --> 0:08:27.960000
 with GNS 3. Now if you are used to using
 a different terminal server application

0:08:27.960000 --> 0:08:34.080000
 like for example hyper terminal or
 secure CRT or something you can GNS

0:08:34.080000 --> 0:08:38.220000
 3 does give you the flexibility to use
 whatever terminal application you

0:08:38.220000 --> 0:08:41.660000
 want it's just the
 defaults to putty.

0:08:41.660000 --> 0:08:45.600000
 And then lastly there's tight VNC viewer
 and that's more of an advanced

0:08:45.600000 --> 0:08:48.640000
 topic I'm not going to get
 into the details of that.

0:08:48.640000 --> 0:08:52.760000
 So let's just go ahead and let it default
 all this stuff and I'll click

0:08:52.760000 --> 0:09:00.480000
 next and I'll let it default to the
 file that it wants to the folder.

0:09:00.480000 --> 0:09:06.220000
 Now in this particular case it detects
 that when PCAP is already running

0:09:06.220000 --> 0:09:09.740000
 on my machine it's already installed
 on my machine so I don't need to

0:09:09.740000 --> 0:09:13.360000
 install it again but if you don't get
 this message you definitely want

0:09:13.360000 --> 0:09:15.940000
 to have when PCAP installed
 on your laptop.

0:09:15.940000 --> 0:09:19.960000
 So for example if you've never used
 wire shark before if you've never

0:09:19.960000 --> 0:09:24.560000
 had a reason to sniff ethnet frames
 or packets you might not have when

0:09:24.560000 --> 0:09:27.980000
 PCAP on your laptop and you
 might need to install it.

0:09:27.980000 --> 0:09:30.360000
 In this case I'm going
 to cancel out of it.

0:09:30.360000 --> 0:09:34.340000
 Alright now it's downloading wire shark
 I'm going to cancel out a wire

0:09:34.340000 --> 0:09:37.880000
 shark right here going to quit and I'm
 going to cancel out of this because

0:09:37.880000 --> 0:09:43.120000
 I already have wire shark I don't need
 to download it so yeah I will abort

0:09:43.120000 --> 0:09:47.340000
 that. I also already have the response
 time viewer I just showed you an

0:09:47.340000 --> 0:09:50.500000
 example of that so I'll just cancel
 out of that as well just to speed

0:09:50.500000 --> 0:09:53.020000
 things up here for this video.

0:09:53.020000 --> 0:10:01.720000
 And then now it's downloading everything
 else which will be pretty quick.

0:10:01.720000 --> 0:10:05.400000
 And in just a moment here we should
 be there we go set up was completed

0:10:05.400000 --> 0:10:10.620000
 successfully and now I click next and
 now I have the option to get a free

0:10:10.620000 --> 0:10:13.700000
 license of the SolarWinds
 standard tool set.

0:10:13.700000 --> 0:10:16.720000
 You're definitely going to want this
 lots of tools available for free

0:10:16.720000 --> 0:10:20.620000
 which is awesome so you want to click
 yes and then when you hit next it'll

0:10:20.620000 --> 0:10:24.660000
 actually bring up a web browser or
 a new tab in your web browser that

0:10:24.660000 --> 0:10:28.180000
 allows you to go to the SolarWinds
 website and register for that free

0:10:28.180000 --> 0:10:32.560000
 license which will then
 be emailed to you.

0:10:32.560000 --> 0:10:37.340000
 And then lastly we can start GNS by
 hitting the finish button here.

0:10:37.340000 --> 0:10:41.820000
 So at this point I'm going to go ahead
 and stop this video right here

0:10:41.820000 --> 0:10:46.140000
 this concludes part one of the setup
 and in part two of the setup the

0:10:46.140000 --> 0:10:48.740000
 next video I'm going to click the finish
 button here we're going to see

0:10:48.740000 --> 0:10:54.460000
 what the next steps are to for example
 import Cisco iOS into GNS so it

0:10:54.460000 --> 0:10:55.940000
 has something you can work with.

0:10:55.940000 --> 0:10:57.160000
 So we'll see that in
 the next section.

