WEBVTT

0:00:08.120000 --> 0:00:13.780000
 In this video, before we go into the details
 of how to create a GNS3 virtual

0:00:13.780000 --> 0:00:18.180000
 topology of routers and ether switches,
 we need to preface that by first

0:00:18.180000 --> 0:00:22.560000
 going over just some real
 basic GNS3 terminology.

0:00:22.560000 --> 0:00:25.680000
 As you can see from the title of this, we're
 going to talk about the differences

0:00:25.680000 --> 0:00:29.000000
 between projects, topologies,
 and nodes.

0:00:29.000000 --> 0:00:32.740000
 This will be a real short video, but
 these things are critical for you

0:00:32.740000 --> 0:00:38.360000
 to understand. So let's start by just
 opening up GNS3 by double clicking

0:00:38.360000 --> 0:00:40.100000
 on the icon here.

0:00:40.100000 --> 0:00:45.820000
 And you'll see that the very first
 thing it asks us to do is to either

0:00:45.820000 --> 0:00:50.300000
 create the name of a brand new project
 that we're going to start out with,

0:00:50.300000 --> 0:00:53.280000
 or open an existing project.

0:00:53.280000 --> 0:00:57.960000
 So that leads us to the question
 of what exactly is a project.

0:00:57.960000 --> 0:01:03.120000
 So to answer that, I'm going to go ahead
 and cancel out of here, and cancel

0:01:03.120000 --> 0:01:07.720000
 out of here. And I've already
 created a GNS3 project.

0:01:07.720000 --> 0:01:13.460000
 Actually, I'll go ahead and show you
 what that looks like within GNS3.

0:01:13.460000 --> 0:01:16.840000
 So from here, I'm just going
 to go on open a project.

0:01:16.840000 --> 0:01:20.160000
 And these are various project
 folders that are here.

0:01:20.160000 --> 0:01:21.900000
 I'll tell you what those
 are in just a second.

0:01:21.900000 --> 0:01:25.960000
 But let me just go ahead and
 click on this EIGRP project.

0:01:25.960000 --> 0:01:29.280000
 So when you're opening an existing
 project, you'll go into where your

0:01:29.280000 --> 0:01:30.320000
 projects are stored.

0:01:30.320000 --> 0:01:35.680000
 And notice, at least in this version
 of GNS3, projects by default are

0:01:35.680000 --> 0:01:44.180000
 stored, let me go back, under your C
 drive, under users, under the name

0:01:44.180000 --> 0:01:46.500000
 of you, your username.

0:01:46.500000 --> 0:01:48.740000
 And then you'll see there's
 a GNS3 folder.

0:01:48.740000 --> 0:01:53.320000
 And if you double click on that,
 you'll see a projects folder.

0:01:53.320000 --> 0:01:55.020000
 Double click on projects.

0:01:55.020000 --> 0:01:57.520000
 And that is where all of
 your projects are stored.

0:01:57.520000 --> 0:02:03.320000
 So as you go about using GNS3 to create
 your own labs for BGP, OSPF, whatever

0:02:03.320000 --> 0:02:08.680000
 it is, and you name those labs, whatever
 you want to name it, BGP, Santa

0:02:08.680000 --> 0:02:13.300000
 Claus, Red Racing car, whatever the
 name of your project is, it'll be

0:02:13.300000 --> 0:02:15.980000
 stored here in your
 projects folder.

0:02:15.980000 --> 0:02:21.300000
 And once again, notice that it's your
 C drive, users, your username, in

0:02:21.300000 --> 0:02:25.340000
 your laptop, GNS3, and projects.

0:02:25.340000 --> 0:02:30.600000
 So let me go ahead and open up
 one of my existing projects.

0:02:30.600000 --> 0:02:34.040000
 I'll click on the name of the project,
 and then I'll go to the actual

0:02:34.040000 --> 0:02:36.400000
 GNS3 project file.

0:02:36.400000 --> 0:02:37.880000
 And I'm going to talk about
 that in just a second.

0:02:37.880000 --> 0:02:41.920000
 So when I open that project file, it
 opens this, a real simple project

0:02:41.920000 --> 0:02:46.320000
 that I created just this morning of
 three routers and an ether switch,

0:02:46.320000 --> 0:02:48.140000
 some basic stuff.

0:02:48.140000 --> 0:02:52.200000
 Now, how did that project
 file create all of this?

0:02:52.200000 --> 0:02:55.520000
 In other words, what's in that project
 file that remembered all of this

0:02:55.520000 --> 0:02:56.800000
 when I created it?

0:02:56.800000 --> 0:03:02.120000
 So let me go ahead and minimize this for
 a second and bring up that project

0:03:02.120000 --> 0:03:04.800000
 file. So here it is.

0:03:04.800000 --> 0:03:06.960000
 I'll go ahead and double
 click on that.

0:03:06.960000 --> 0:03:10.580000
 And you'll see that right in the very
 high level, you've got three things.

0:03:10.580000 --> 0:03:13.020000
 You've got a screenshot, which
 you can open that up.

0:03:13.020000 --> 0:03:14.040000
 It's just a PNG image.

0:03:14.040000 --> 0:03:19.040000
 And that shows it actually took right
 after I saved the project, it took

0:03:19.040000 --> 0:03:22.500000
 a screenshot of what the
 topology currently was.

0:03:22.500000 --> 0:03:23.580000
 So, and this is nice.

0:03:23.580000 --> 0:03:27.020000
 You can send this as an email attachment
 to somebody if you want to show

0:03:27.020000 --> 0:03:28.360000
 them what you've created.

0:03:28.360000 --> 0:03:30.420000
 It's just a PNG image.

0:03:30.420000 --> 0:03:32.980000
 And then you've got
 your project files.

0:03:32.980000 --> 0:03:36.520000
 And if I double click on that,
 it goes into Dynamips.

0:03:36.520000 --> 0:03:39.120000
 And this is all the stuff
 that Dynamips is using.

0:03:39.120000 --> 0:03:42.800000
 And we don't have to go into a lot of
 detail of what all this stuff is.

0:03:42.800000 --> 0:03:47.120000
 But you'll also see in here,
 there are some config files.

0:03:47.120000 --> 0:03:53.460000
 And so when you issue a right memory
 or a copy run start command on your

0:03:53.460000 --> 0:03:57.780000
 router. So I'm saying here that you've
 created a project and you've been

0:03:57.780000 --> 0:04:00.880000
 working with it for an hour or so and
 you're ready to leave it behind.

0:04:00.880000 --> 0:04:02.420000
 You have to go off and
 do something else.

0:04:02.420000 --> 0:04:04.880000
 But you might want to come
 back to this in the future.

0:04:04.880000 --> 0:04:08.000000
 So on every single router and device
 you've got in there, you do copy

0:04:08.000000 --> 0:04:10.220000
 run start or write mem.

0:04:10.220000 --> 0:04:14.820000
 Well, what that does is in this folder
 here, it creates what's called

0:04:14.820000 --> 0:04:16.160000
 a startup config file.

0:04:16.160000 --> 0:04:18.680000
 And you can actually open those
 up with a text editor.

0:04:18.680000 --> 0:04:20.680000
 I'm going to use notepad plus.

0:04:20.680000 --> 0:04:24.200000
 And you can see here, I'll just
 make this a little bit bigger.

0:04:24.200000 --> 0:04:28.560000
 This is the last known state
 of your saved configuration.

0:04:28.560000 --> 0:04:32.560000
 So that the next time you open this
 project within GNS3, it'll go right

0:04:32.560000 --> 0:04:34.560000
 back to the state where it was.

0:04:34.560000 --> 0:04:36.840000
 So that's where all those
 config files are.

0:04:36.840000 --> 0:04:40.780000
 And once again, that was located
 under your projects files here.

0:04:40.780000 --> 0:04:44.460000
 So I went to my users,
 GNS3 projects.

0:04:44.460000 --> 0:04:47.980000
 I double clicked on the actual name of
 the project and under project files

0:04:47.980000 --> 0:04:50.920000
 is where all those configurations
 were.

0:04:50.920000 --> 0:04:55.260000
 So these are your configuration
 files all located in here.

0:04:55.260000 --> 0:04:58.580000
 That's where your config files
 are located right there.

0:04:58.580000 --> 0:05:01.880000
 So what is this thing
 called a project file?

0:05:01.880000 --> 0:05:03.340000
 Well, you can also open that up.

0:05:03.340000 --> 0:05:07.580000
 Notice it's a GNS3 project file, but
 you can right click on it, open it

0:05:07.580000 --> 0:05:08.960000
 up with a text editor.

0:05:08.960000 --> 0:05:12.200000
 Once again, notepad
 or notepad plus.

0:05:12.200000 --> 0:05:15.780000
 And I'm not going to go through
 this in a lot of depth.

0:05:15.780000 --> 0:05:22.020000
 But basically what this file is, is
 this file gives GNS3 everything it

0:05:22.020000 --> 0:05:26.160000
 needs to know about, okay, when I build
 this thing, where are the routers

0:05:26.160000 --> 0:05:30.800000
 located? For example, when I show them
 the user a square, a working area

0:05:30.800000 --> 0:05:34.080000
 is a router going to be in the upper
 left and the lower left is going

0:05:34.080000 --> 0:05:36.340000
 to be in the right or somewhere
 in the middle.

0:05:36.340000 --> 0:05:40.200000
 So that's one of the things this file
 does, that it displays those router

0:05:40.200000 --> 0:05:45.700000
 icons in the same locations as where
 you drag and drop them when you saved

0:05:45.700000 --> 0:05:46.840000
 the project file.

0:05:46.840000 --> 0:05:48.700000
 So they're not just
 all willy-nilly.

0:05:48.700000 --> 0:05:51.920000
 It also in here saves, you know,
 how were they connected?

0:05:51.920000 --> 0:05:56.140000
 Was router A connected to router B
 via a fast ethernet or via a serial

0:05:56.140000 --> 0:06:00.760000
 interface? If it was fast ethernet, which
 fast ethernet was a fast ethernet

0:06:00.760000 --> 0:06:03.380000
 00, 00 slash one?

0:06:03.380000 --> 0:06:06.080000
 So all of that is stored
 in here as well.

0:06:06.080000 --> 0:06:09.300000
 It also stores information like,
 what was the name of the device?

0:06:09.300000 --> 0:06:13.340000
 You know, if you change the default name
 from router one to San Francisco

0:06:13.340000 --> 0:06:18.720000
 or to fuzzy or Bob or something, all
 of that is saved in here so that

0:06:18.720000 --> 0:06:23.140000
 when you open it up, those
 changes are also in effect.

0:06:23.140000 --> 0:06:26.820000
 Other things like, you know, when you
 create the project, what kind of

0:06:26.820000 --> 0:06:27.820000
 a router was it?

0:06:27.820000 --> 0:06:32.500000
 Was it a 3640, a 3725,
 something else?

0:06:32.500000 --> 0:06:34.880000
 Also, what iOS image was used?

0:06:34.880000 --> 0:06:38.440000
 It stores the actual full iOS image
 that you used when you created the

0:06:38.440000 --> 0:06:43.440000
 project. So this GNS3 project file, pretty
 much the only thing it doesn't

0:06:43.440000 --> 0:06:49.360000
 have are the configs, the startup config,
 but everything else is stored

0:06:49.360000 --> 0:06:54.040000
 in here so that GNS3 can recreate
 your project once you pull it up.

0:06:54.040000 --> 0:06:58.220000
 So as I just scroll through here a little
 bit, you can see it's got, you

0:06:58.220000 --> 0:07:01.100000
 know, your X and Y coordinates for
 this particular router, so it will

0:07:01.100000 --> 0:07:03.900000
 place it on the screen exactly
 where it needs to go.

0:07:03.900000 --> 0:07:08.080000
 It talks about a description about
 a link, what it's connected to, if

0:07:08.080000 --> 0:07:10.060000
 I scroll down a little bit more.

0:07:10.060000 --> 0:07:15.440000
 So you see, each one of these is
 describing a device, node ID2.

0:07:15.440000 --> 0:07:17.880000
 Well, I don't know what that is,
 but GNS3 knows what that is.

0:07:17.880000 --> 0:07:20.700000
 That's one particular router
 or switch in there.

0:07:20.700000 --> 0:07:24.400000
 And if I go further on down, so this
 is all just describing where things

0:07:24.400000 --> 0:07:28.640000
 show up in the picture and how they're
 all connected, so you notice how

0:07:28.640000 --> 0:07:34.500000
 right here gets all the adapters, their
 names, how GNS3 recognizes them.

0:07:34.500000 --> 0:07:38.380000
 If I go down a little bit further,
 it gives my idle PC value that was

0:07:38.380000 --> 0:07:42.620000
 assigned. It also gives the name of
 the router, if I changed it from the

0:07:42.620000 --> 0:07:46.740000
 default name to something else, the
 platform, and even goes down here

0:07:46.740000 --> 0:07:47.520000
 a little bit further.

0:07:47.520000 --> 0:07:51.100000
 And yeah, right here, the image shows
 the image that was created.

0:07:51.100000 --> 0:07:53.720000
 So this is your GNS3 project file.


0:07:53.720000 --> 0:07:58.380000
 So when you are saving a project just
 to recap what exactly are you doing

0:07:58.380000 --> 0:07:59.980000
 when you save a project?

0:07:59.980000 --> 0:08:04.160000
 Well, whatever the name of that project
 is, it creates a folder with that

0:08:04.160000 --> 0:08:06.380000
 name, as you can see here.

0:08:06.380000 --> 0:08:12.180000
 And within that folder, it creates a
 screenshot, so it can display that

0:08:12.180000 --> 0:08:13.800000
 screenshot for you again.

0:08:13.800000 --> 0:08:19.320000
 It creates a project's files which
 has all of your config files in it,

0:08:19.320000 --> 0:08:23.160000
 as well as also the state of memory, like
 what was the state of the routing

0:08:23.160000 --> 0:08:27.000000
 table? What was the state of the ARP
 table and all that good stuff?

0:08:27.000000 --> 0:08:31.480000
 And then lastly, it has a projects
 file and we talked about what that

0:08:31.480000 --> 0:08:35.200000
 is. So I'm not quite done yet, but hopefully
 at this point, you understand

0:08:35.200000 --> 0:08:39.460000
 the difference between a config file and
 a project file from the standpoint

0:08:39.460000 --> 0:08:44.620000
 of GNS3. Right? The project file
 is everything but the configs.

0:08:44.620000 --> 0:08:47.800000
 The project files how GNS pieces
 everything together.

0:08:47.800000 --> 0:08:50.960000
 The config file, like we talked
 about, is just like it sounds.

0:08:50.960000 --> 0:08:54.820000
 It's the last state of your configs
 when you did a right memory.

0:08:54.820000 --> 0:08:59.280000
 Now keep this in mind, if you close
 your GNS3 project, if you're done

0:08:59.280000 --> 0:09:03.560000
 and you walk away from it, you close
 it all up, anything that was not

0:09:03.560000 --> 0:09:06.940000
 saved is gone. It's just like
 a real router, right?

0:09:06.940000 --> 0:09:11.880000
 In a real Cisco iOS router, if you power
 that router off, anything that

0:09:11.880000 --> 0:09:15.800000
 was in your running configuration that was
 not saved to your startup configuration

0:09:15.800000 --> 0:09:19.300000
 is lost. Same thing
 here with GNS3.

0:09:19.300000 --> 0:09:24.200000
 It does not save a copy of what your
 last running configuration was.

0:09:24.200000 --> 0:09:27.540000
 It only saves what your last
 startup configuration was.

0:09:27.540000 --> 0:09:31.920000
 So make sure you save your configs with
 right-mem or copy run start before

0:09:31.920000 --> 0:09:36.820000
 you turn off all your routers and
 shut down the GNS3 application.

0:09:36.820000 --> 0:09:39.660000
 One other thing I want to talk
 about, just one other term.

0:09:39.660000 --> 0:09:43.120000
 So in GNS3 terminology, if you take
 a look at this window here off to

0:09:43.120000 --> 0:09:48.280000
 the left, this is a toolbar here that
 shows you all of the nodes that

0:09:48.280000 --> 0:09:51.960000
 are available. So for example, if I
 click on this one here, this shows

0:09:51.960000 --> 0:09:54.980000
 me all of the router nodes
 that are available.

0:09:54.980000 --> 0:10:01.320000
 This shows me my switching nodes that
 are available, or my PC nodes or

0:10:01.320000 --> 0:10:06.600000
 a cloud node. So pretty much anything
 that you can drag and drop into

0:10:06.600000 --> 0:10:12.100000
 this working area right here is what
 GNS3 considers to be a node, whether

0:10:12.100000 --> 0:10:16.680000
 it be a router, a switch,
 a PC, a firewall.

0:10:16.680000 --> 0:10:20.800000
 They're all considered nodes
 from GNS3's standpoint.

0:10:20.800000 --> 0:10:24.400000
 So as far as basic terminology is concerned,
 that concludes this particular

0:10:24.400000 --> 0:10:27.880000
 video. And the next set of videos will
 take a little bit more at this,

0:10:27.880000 --> 0:10:31.540000
 a better look at this user interface
 and see what the various toolbars

0:10:31.540000 --> 0:10:34.540000
 are and how we can start building
 some basic topologies.

