WEBVTT

0:00:08.300000 --> 0:00:11.420000
 So we finally have GNS3
 up and running.

0:00:11.420000 --> 0:00:12.560000
 We've got it loaded.

0:00:12.560000 --> 0:00:16.120000
 It's ready to go to start
 building our virtual labs.

0:00:16.120000 --> 0:00:17.880000
 So let's go ahead and
 get going with that.

0:00:17.880000 --> 0:00:21.920000
 So in these next set of videos, I'm going
 to actually be combining several

0:00:21.920000 --> 0:00:25.440000
 things at once. I'm going to be slowly
 building a lab and at the same

0:00:25.440000 --> 0:00:27.960000
 time, I'm going to be telling you a
 little bit about what the various

0:00:27.960000 --> 0:00:32.300000
 icons are and what the toolbars are
 surrounding the outer periphery or

0:00:32.300000 --> 0:00:35.080000
 the outside of your GNS GUI.

0:00:35.080000 --> 0:00:37.600000
 So let's get started with that.

0:00:37.600000 --> 0:00:41.940000
 So let's go ahead
 and open up GNS3.

0:00:41.940000 --> 0:00:45.000000
 And like we saw previously, the first
 thing it's going to do is ask us

0:00:45.000000 --> 0:00:47.460000
 to name this particular project.

0:00:47.460000 --> 0:00:49.480000
 And that's whatever you want.

0:00:49.480000 --> 0:00:52.220000
 You could even leave it
 as untitled if you wish.

0:00:52.220000 --> 0:00:59.740000
 I'm just going to say test CCNA,
 I'll just say CCNA project one.

0:00:59.740000 --> 0:01:07.380000
 There we go. Okay, so let's talk a little
 bit about what we are looking

0:01:07.380000 --> 0:01:11.200000
 at here, what these various
 things are on the screen.

0:01:11.200000 --> 0:01:15.720000
 So starting with this area right here,
 this large white space, basically

0:01:15.720000 --> 0:01:17.840000
 we call this the workspace.

0:01:17.840000 --> 0:01:22.160000
 So this is where your various routers
 and stuff are going to end up going.

0:01:22.160000 --> 0:01:25.680000
 They're connected to each other and
 your switches and things like that.

0:01:25.680000 --> 0:01:31.940000
 And so this is where you're going to create
 your topology is in the workspace.

0:01:31.940000 --> 0:01:36.820000
 Now the next thing I want to focus on
 is this toolbar right here on the

0:01:36.820000 --> 0:01:39.860000
 left. This is called
 the devices toolbar.

0:01:39.860000 --> 0:01:44.060000
 And from here, like it sounds, you get
 to select the various devices that

0:01:44.060000 --> 0:01:47.820000
 you want. Now the devices that are going
 to be available here are dependent

0:01:47.820000 --> 0:01:48.960000
 on a couple of things.

0:01:48.960000 --> 0:01:53.380000
 Number one depends on what iOS
 software you have put in here.

0:01:53.380000 --> 0:01:57.120000
 Now at minimum, you should have
 something in the router section.

0:01:57.120000 --> 0:02:01.560000
 I mean, even if you have just one flavor
 of Cisco iOS software, it's going

0:02:01.560000 --> 0:02:06.060000
 to be router software because GNS3
 doesn't support switching software.

0:02:06.060000 --> 0:02:08.460000
 It only supports router software.

0:02:08.460000 --> 0:02:11.320000
 So you'll have something
 in the router section.

0:02:11.320000 --> 0:02:15.720000
 So let's go ahead and open up this
 and see what it looks like.

0:02:15.720000 --> 0:02:19.780000
 So if I go ahead and click on this,
 it shows me that right now I have

0:02:19.780000 --> 0:02:24.400000
 a single router because I should say
 a single platform of router available

0:02:24.400000 --> 0:02:31.100000
 to me because right now all I loaded
 in was a 3725 iOS image.

0:02:31.100000 --> 0:02:36.560000
 If for some reason I want more, I would
 just go up to edit preferences.

0:02:36.560000 --> 0:02:40.620000
 And then on my left section here, under
 Dynamips, I click on iOS routers

0:02:40.620000 --> 0:02:42.280000
 and I'd say new.

0:02:42.280000 --> 0:02:48.160000
 And then I would locate the new image
 I want to insert, which in this

0:02:48.160000 --> 0:02:50.420000
 case is stored in my hard drive.

0:02:50.420000 --> 0:02:53.420000
 Maybe I want a 7200 series iOS.

0:02:53.420000 --> 0:02:57.860000
 So I put that in there and you should
 always decompress it that way your

0:02:57.860000 --> 0:03:00.360000
 routers will start
 much more quickly.

0:03:00.360000 --> 0:03:02.020000
 You can just leave
 the name the same.

0:03:02.020000 --> 0:03:04.420000
 And this is just like we
 talked about earlier.

0:03:04.420000 --> 0:03:07.840000
 Make sure the memory that actually is
 the appropriate amount of memory,

0:03:07.840000 --> 0:03:12.100000
 512 megs. And that's one of the downsides
 of using the 7200 series.

0:03:12.100000 --> 0:03:13.920000
 They eat up a gob of memory.

0:03:13.920000 --> 0:03:18.700000
 You can see that just running two of
 those things is going to eat up one

0:03:18.700000 --> 0:03:22.720000
 gig. And then you populate
 your slots.

0:03:22.720000 --> 0:03:25.820000
 So I'll just put another couple
 of fast ethernets in there.

0:03:25.820000 --> 0:03:31.540000
 And I'll put a 8 port serial car and
 that's all I'm going to do for now.

0:03:31.540000 --> 0:03:34.580000
 And then select your idle PC.

0:03:34.580000 --> 0:03:38.220000
 And this is all stuff that we saw
 earlier in the previous videos.

0:03:38.220000 --> 0:03:40.600000
 All I'm doing right now is showing
 you what you need to do if you want

0:03:40.600000 --> 0:03:47.080000
 to get another model of router available
 to you in the router's devices.

0:03:47.080000 --> 0:03:49.900000
 So this shouldn't take too long.

0:03:49.900000 --> 0:03:51.540000
 And there we go.

0:03:51.540000 --> 0:03:53.940000
 Now we have an idle PC value
 that's been found.

0:03:53.940000 --> 0:03:56.560000
 So I can hit that and finish.

0:03:56.560000 --> 0:04:03.060000
 And now when I hit apply and OK, now
 if I go back to the router section

0:04:03.060000 --> 0:04:05.660000
 I've got two different
 flavors of router.

0:04:05.660000 --> 0:04:09.680000
 Now remember what I told you earlier
 that ideally when you create your

0:04:09.680000 --> 0:04:14.440000
 topologies, if you can, just stick
 with one flavor of router.

0:04:14.440000 --> 0:04:18.260000
 For example, in this particular topology
 here, if I drop in a couple of

0:04:18.260000 --> 0:04:25.360000
 3725s and then maybe a 7200, I'm now
 going to be eating up a lot more

0:04:25.360000 --> 0:04:28.000000
 memory. Now these routers right
 now are not turned on.

0:04:28.000000 --> 0:04:28.960000
 They're not powered on.

0:04:28.960000 --> 0:04:32.200000
 But once they are turned on, it's going
 to consume more memory because

0:04:32.200000 --> 0:04:38.420000
 I'm going to have a 7200 series image
 running at the same time as a 3725

0:04:38.420000 --> 0:04:45.660000
 image. Be a lot easier if I just get rid
 of my 7200 and just keep my topology

0:04:45.660000 --> 0:04:49.500000
 purely made of all the
 same model, 3725s.

0:04:49.500000 --> 0:04:54.400000
 That will consume less
 memory on my laptop.

0:04:54.400000 --> 0:04:58.000000
 So you can see here, I've shown you
 basically, here's the routers, you

0:04:58.000000 --> 0:05:00.880000
 just basically drag and drop
 them into your topology.

0:05:00.880000 --> 0:05:03.240000
 Now one thing that's kind of nice about
 this, as you've seen, I've been

0:05:03.240000 --> 0:05:05.420000
 dragging them individually
 one at a time.

0:05:05.420000 --> 0:05:09.060000
 A nice little sort of shortcut because
 I'm guessing you're probably going

0:05:09.060000 --> 0:05:13.060000
 to want to make a topology that's
 more than one router is.

0:05:13.060000 --> 0:05:15.520000
 And what I'm doing here is I'm just
 right clicking on the router to get

0:05:15.520000 --> 0:05:21.960000
 all of these various options is when
 you drag your router in before you

0:05:21.960000 --> 0:05:26.300000
 let go of your mouse on your keyboard
 press your shift key and then while

0:05:26.300000 --> 0:05:29.300000
 you're pressing shift
 let go of your mouse.

0:05:29.300000 --> 0:05:32.660000
 And now it actually prompts you how
 many routers do you want to drop.

0:05:32.660000 --> 0:05:35.780000
 So instead of just dropping one, if
 I know that my topology is going to

0:05:35.780000 --> 0:05:39.940000
 have five routers I can just put five
 here and bam, there they are.

0:05:39.940000 --> 0:05:42.660000
 There's all five routers.

0:05:42.660000 --> 0:05:49.600000
 So that is the router's devices or the router
 nodes because remember everything

0:05:49.600000 --> 0:05:52.060000
 on the section here on the
 left is called a node.

0:05:52.060000 --> 0:05:56.840000
 And the next one down is
 the switching nodes.

0:05:56.840000 --> 0:06:01.280000
 And you can see here that GNS3 by default
 provides you an ATM switch.

0:06:01.280000 --> 0:06:03.360000
 Now this is a real
 basic ATM switch.

0:06:03.360000 --> 0:06:07.200000
 This is not running Cisco iOS.

0:06:07.200000 --> 0:06:10.280000
 But if you want to drag and drop some
 routers here that have some ATM

0:06:10.280000 --> 0:06:13.840000
 interfaces, well you're going to need
 an ATM switch to connect them.

0:06:13.840000 --> 0:06:15.840000
 And so here's a real
 easy way to do that.

0:06:15.840000 --> 0:06:17.800000
 You also have an Ethernet hub.

0:06:17.800000 --> 0:06:19.420000
 You have an Ethernet switch.

0:06:19.420000 --> 0:06:24.980000
 So these first three here, these go by
 the name of built in nodes because

0:06:24.980000 --> 0:06:27.180000
 you don't need any special
 iOS for these.

0:06:27.180000 --> 0:06:31.200000
 They are built into GNS3
 as built in nodes.

0:06:31.200000 --> 0:06:35.540000
 And then the last one also is a built
 in node, the frame relay switch.

0:06:35.540000 --> 0:06:37.380000
 That's also in there.

0:06:37.380000 --> 0:06:40.980000
 And I'll just go ahead and drop in
 for example the Ethernet switch.

0:06:40.980000 --> 0:06:42.920000
 We'll talk more about
 switching later on.

0:06:42.920000 --> 0:06:47.540000
 But if I right click that you can see
 there's no option in here to open

0:06:47.540000 --> 0:06:51.060000
 a command line, to open a console because
 there is no command line in

0:06:51.060000 --> 0:06:54.720000
 this. In this one I would
 just hit configure.

0:06:54.720000 --> 0:06:58.240000
 And for example here I could select
 my particular interfaces, whether

0:06:58.240000 --> 0:07:03.840000
 I want them to be access ports, 802
.1Q, what VLAN I want them to be in,

0:07:03.840000 --> 0:07:04.820000
 and so on and so forth.

0:07:04.820000 --> 0:07:07.500000
 And we'll get into more of that later
 on when we get into the switching

0:07:07.500000 --> 0:07:12.840000
 section. Now the one switching node
 in here that is not a built in node

0:07:12.840000 --> 0:07:15.040000
 is the ether switch router.

0:07:15.040000 --> 0:07:21.040000
 This is here because when I imported
 my 3725 iOS image, I clicked on that

0:07:21.040000 --> 0:07:24.460000
 little box that said this
 is an ether switch router.

0:07:24.460000 --> 0:07:28.780000
 And that automatically told this router
 hey you need to have the ethernet

0:07:28.780000 --> 0:07:31.060000
 switching module built in.

0:07:31.060000 --> 0:07:34.620000
 So this is a 3725 but it's got that
 ethernet switching module built in.

0:07:34.620000 --> 0:07:38.880000
 So if I want to practice some actual
 Cisco iOS commands that relate to

0:07:38.880000 --> 0:07:44.340000
 switching, this is the guy I would want
 to drag and drop into my topology.

0:07:44.340000 --> 0:07:46.380000
 So those are all your switches.

0:07:46.380000 --> 0:07:49.040000
 The next node down is
 your PC type node.

0:07:49.040000 --> 0:07:51.880000
 And you've actually
 got three of these.

0:07:51.880000 --> 0:07:53.340000
 Let me start with the bottom one.

0:07:53.340000 --> 0:07:56.460000
 The virtual PC is most likely the one
 that you're going to use when you

0:07:56.460000 --> 0:08:01.280000
 first getting get started with GNS3,
 this is the one you're going to use.

0:08:01.280000 --> 0:08:06.580000
 And like I mentioned in previous videos,
 this virtual PC here allows you

0:08:06.580000 --> 0:08:17.260000
 to, if I open up the console, it would
 let me start UDP streams, TCP streams,

0:08:17.260000 --> 0:08:20.700000
 and we'll get all into that when I
 talk about how I actually use these

0:08:20.700000 --> 0:08:23.900000
 PCs. Now you might be wondering to yourself,
 well, what's the difference

0:08:23.900000 --> 0:08:29.620000
 between this virtual PC and this other
 node I see up here called the host

0:08:29.620000 --> 0:08:34.440000
 node? Well, they're actually extremely
 different from each other.

0:08:34.440000 --> 0:08:40.160000
 Actually the host node and the cloud
 node are exactly the same thing.

0:08:40.160000 --> 0:08:43.100000
 They're just two different representations
 for something.

0:08:43.100000 --> 0:08:46.120000
 I'll talk more about this later, but
 let me just give you a preview real

0:08:46.120000 --> 0:08:51.440000
 quickly. So we know that GNS3 is running
 as an application inside of your

0:08:51.440000 --> 0:08:56.580000
 laptop. And presumably, your laptop has
 some sort of real network interface

0:08:56.580000 --> 0:09:01.380000
 card, a wired ethernet card
 or at minimum, a Wi-Fi NIC.

0:09:01.380000 --> 0:09:05.860000
 Well, sometimes you might have a desire
 to actually connect your GNS3

0:09:05.860000 --> 0:09:09.360000
 virtual topology to the
 real outside world.

0:09:09.360000 --> 0:09:12.940000
 And this is where you would use either
 the cloud node or the host node

0:09:12.940000 --> 0:09:17.100000
 to do that. Both of them do the exact
 same thing when you use those.

0:09:17.100000 --> 0:09:20.460000
 So for example, if I bring in the cloud
 node here, one of the things I

0:09:20.460000 --> 0:09:22.780000
 would have to do with this, I'm not
 going to go into the details right

0:09:22.780000 --> 0:09:25.780000
 now, but when you right click on that,
 one of the things you would do

0:09:25.780000 --> 0:09:29.380000
 is within that cloud node, you would
 tell it what network interface card

0:09:29.380000 --> 0:09:33.100000
 I want to use. Like in my particular
 laptop, I have both a wired ethernet

0:09:33.100000 --> 0:09:35.060000
 and a Wi-Fi NIC.

0:09:35.060000 --> 0:09:36.460000
 So I could select one of those.

0:09:36.460000 --> 0:09:40.260000
 I could go into that cloud node and
 say, okay, cloud, you are actually

0:09:40.260000 --> 0:09:44.760000
 going to connect to my wired
 ethernet NIC card.

0:09:44.760000 --> 0:09:48.680000
 And then if I connect one of those
 routers to that cloud, guess what?

0:09:48.680000 --> 0:09:53.360000
 That router now actually has access
 to whatever is connected to my wired

0:09:53.360000 --> 0:09:57.220000
 NIC. So if my wired NIC is connected
 to a real physical switch sitting

0:09:57.220000 --> 0:10:01.620000
 on a desk right next to me or a real
 physical router on a desk right next

0:10:01.620000 --> 0:10:06.120000
 to me, that physical device will now
 be able to talk to my virtual router,

0:10:06.120000 --> 0:10:10.120000
 my emulated router, because they're
 both connected via this cloud.

0:10:10.120000 --> 0:10:14.400000
 And the cloud is that node that actually
 connects the virtual topology

0:10:14.400000 --> 0:10:17.240000
 with my actual physical NIC card.

0:10:17.240000 --> 0:10:20.800000
 The cloud could also connect to
 your Wi-Fi NIC card as well.

0:10:20.800000 --> 0:10:25.580000
 Now you might be wondering, well, if
 cloud and the host node are both

0:10:25.580000 --> 0:10:30.100000
 exactly the same thing, why would
 I use one or the other?

0:10:30.100000 --> 0:10:31.240000
 What's the difference?

0:10:31.240000 --> 0:10:35.620000
 It really is just for you to keep your
 topology sort of in your mind.

0:10:35.620000 --> 0:10:41.940000
 For example, let's say that connected
 to my laptop, connected to my ethernet

0:10:41.940000 --> 0:10:46.980000
 cable right here on my laptop, I actually
 had a real physical window server

0:10:46.980000 --> 0:10:53.060000
 right here. Running like a Windows
 R8 server, a Windows 2000 server or

0:10:53.060000 --> 0:10:54.180000
 something like that.

0:10:54.180000 --> 0:10:56.800000
 Because I was going to use that
 server for doing like AAA.

0:10:56.800000 --> 0:10:58.600000
 Maybe I want to be
 a radius server.

0:10:58.600000 --> 0:11:03.580000
 Maybe I want to configure it as a domain
 server or as a install Apache

0:11:03.580000 --> 0:11:06.360000
 on there, so I could browse to
 it or something like that.

0:11:06.360000 --> 0:11:12.860000
 And I want to connect my GNS3 virtual
 topology to that one physical server.

0:11:12.860000 --> 0:11:17.080000
 Well, in my topology, it would probably
 make more sense then for me to

0:11:17.080000 --> 0:11:19.640000
 connect my router to the host.

0:11:19.640000 --> 0:11:24.140000
 Because after all, my physical laptop,
 the cable is connecting to one

0:11:24.140000 --> 0:11:27.460000
 thing, a host device,
 one physical server.

0:11:27.460000 --> 0:11:31.380000
 I could just as easily have used the
 cloud icon as well because they both

0:11:31.380000 --> 0:11:32.800000
 do the same thing.

0:11:32.800000 --> 0:11:36.440000
 But where I would probably use the
 cloud is, as you get more advanced

0:11:36.440000 --> 0:11:39.320000
 with some of your switching labs, especially
 when you get to the CCNP

0:11:39.320000 --> 0:11:43.580000
 level, you'll realize that a lot of
 the switching commands that you need

0:11:43.580000 --> 0:11:49.480000
 to know for the CCNP and for the CCIE
 unfortunately require either a real

0:11:49.480000 --> 0:11:53.000000
 physical switch or L2IOU.

0:11:53.000000 --> 0:11:57.400000
 And even L2IOU doesn't have all the
 commands that real physical switches

0:11:57.400000 --> 0:12:01.800000
 do. So for a lot of that stuff, you're
 going to need a real physical switch.

0:12:01.800000 --> 0:12:03.820000
 So, let's say I had
 a little rack here.

0:12:03.820000 --> 0:12:07.700000
 Let's say I had three physical switches
 that I purchased from Cisco or

0:12:07.700000 --> 0:12:10.980000
 from eBay or from someplace,
 three physical switches.

0:12:10.980000 --> 0:12:16.300000
 And I want to connect those three physical
 switches into my GNS3 topology.

0:12:16.300000 --> 0:12:19.440000
 Well, once again, I would have to connect
 one of them physically to the

0:12:19.440000 --> 0:12:21.520000
 knit card on my laptop.

0:12:21.520000 --> 0:12:24.560000
 And then I would probably use the cloud
 node because in this particular

0:12:24.560000 --> 0:12:28.320000
 case, just to think of it in my mind,
 well, my GNS3 environment is not

0:12:28.320000 --> 0:12:30.260000
 really just connecting
 to one thing.

0:12:30.260000 --> 0:12:33.660000
 It's connecting to three
 things, three switches.

0:12:33.660000 --> 0:12:36.420000
 So it makes more sense for
 me to use the cloud.

0:12:36.420000 --> 0:12:39.100000
 But really, they both do
 exactly the same thing.

0:12:39.100000 --> 0:12:42.740000
 They're built in nodes that allow you
 to connect your GNS3 environment

0:12:42.740000 --> 0:12:46.280000
 to something physically connected
 to your laptop.

0:12:46.280000 --> 0:12:48.340000
 And that's it. So that's
 what they are.

0:12:48.340000 --> 0:12:54.260000
 So let's go ahead and get
 rid of those for a moment.

0:12:54.260000 --> 0:12:56.980000
 Delete and delete.

0:12:56.980000 --> 0:13:02.060000
 And then if we keep on going down, this
 one here, I don't have anything

0:13:02.060000 --> 0:13:05.420000
 in this. So this one says
 security devices.

0:13:05.420000 --> 0:13:07.980000
 So this is for more
 advanced users.

0:13:07.980000 --> 0:13:11.800000
 In order to do security devices, now I'd
 have to have some virtual machines

0:13:11.800000 --> 0:13:17.400000
 and stuff in order to do like a Cisco
 ASA or a PIX or something like that.

0:13:17.400000 --> 0:13:20.020000
 But in my case, I don't have
 any of that kind of stuff.

0:13:20.020000 --> 0:13:21.840000
 So there's nothing
 showing up here.

0:13:21.840000 --> 0:13:25.700000
 And then this fourth, this fifth one
 down basically shows you everything.

0:13:25.700000 --> 0:13:27.960000
 So actually, you can just click on
 that and it'll show you everything

0:13:27.960000 --> 0:13:32.180000
 you have if you just want to
 get a view of all the nodes.

0:13:32.180000 --> 0:13:35.960000
 The last one is actually
 not displaying any node.

0:13:35.960000 --> 0:13:39.720000
 This last one, if you can see it as
 I hover my mouse over it, it says

0:13:39.720000 --> 0:13:44.980000
 add a link. If I click on that, that's
 actually what I use to add links

0:13:44.980000 --> 0:13:46.380000
 between my devices.

0:13:46.380000 --> 0:13:49.560000
 So for example, let me go
 ahead and unclick it.

0:13:49.560000 --> 0:13:54.420000
 Let's say I want to connect these routers
 together and let's say I want

0:13:54.420000 --> 0:13:57.540000
 to connect R1 and R2 via Ethernet.


0:13:57.540000 --> 0:14:04.620000
 So I click my link tool and now notice
 that my cursor turns into a plus

0:14:04.620000 --> 0:14:08.360000
 sign. So I don't even know
 how to describe that.

0:14:08.360000 --> 0:14:12.400000
 But basically, you just click on one
 of your devices like my router and

0:14:12.400000 --> 0:14:14.460000
 now shows me all the interfaces
 in that router.

0:14:14.460000 --> 0:14:18.960000
 So I say, all right, well, I want to
 select fast ethernet 00 and now I'm

0:14:18.960000 --> 0:14:20.020000
 creating a link.

0:14:20.020000 --> 0:14:24.740000
 I go up and click the other router and
 I want to connect him to fast ethernet

0:14:24.740000 --> 0:14:29.960000
 00. So now I have just created a
 link between these two routers.

0:14:29.960000 --> 0:14:33.220000
 Oh, between router two and router four,
 I want to connect them via serial.

0:14:33.220000 --> 0:14:39.100000
 So I click on him, serial two zero
 connecting to serial two zero.

0:14:39.100000 --> 0:14:42.240000
 And as long as this link is selected,
 notice got the little sort of stop

0:14:42.240000 --> 0:14:44.760000
 sign there as long
 as I was depressed.

0:14:44.760000 --> 0:14:49.860000
 Any time I click on our device, it'll
 allow me to connect links from that

0:14:49.860000 --> 0:14:51.640000
 device to another device.

0:14:51.640000 --> 0:14:55.160000
 And then once I'm done, I just go back
 to the link button again, press

0:14:55.160000 --> 0:14:57.260000
 it and deselect it.

0:14:57.260000 --> 0:15:01.880000
 So just to recap this section, I'm
 going to wrap up this video.

0:15:01.880000 --> 0:15:06.060000
 So far, what we've talked about is
 the workspace and this is where I'm

0:15:06.060000 --> 0:15:07.580000
 actually going to start
 working with my devices.

0:15:07.580000 --> 0:15:13.700000
 This is where you drag and drop everything
 and this is where you saved

0:15:13.700000 --> 0:15:15.060000
 my project right now.

0:15:15.060000 --> 0:15:18.360000
 I'll just go ahead and do
 that file save project.

0:15:18.360000 --> 0:15:21.620000
 And remember what I named
 it CCNA project one.

0:15:21.620000 --> 0:15:26.740000
 Well, now if I go into my folder where
 my projects are located, let's

0:15:26.740000 --> 0:15:28.040000
 go ahead and do that.

0:15:28.040000 --> 0:15:37.760000
 C drive users, my name,
 GNS three projects.

0:15:37.760000 --> 0:15:40.140000
 And there it is CCNA project one.

0:15:40.140000 --> 0:15:43.960000
 If I double click that, here's
 the latest screenshot.

0:15:43.960000 --> 0:15:49.220000
 So there's the PNG image of
 what I've created so far.

0:15:49.220000 --> 0:15:54.500000
 Now notice, what if I, let's
 go ahead and go back to this.

0:15:54.500000 --> 0:15:56.840000
 What if I move this
 around a little bit?

0:15:56.840000 --> 0:16:02.120000
 Like that. Okay, is that automatically
 going to update that PNG image?

0:16:02.120000 --> 0:16:05.200000
 Well, let's refresh this.

0:16:05.200000 --> 0:16:08.660000
 Refresh, open it up.

0:16:08.660000 --> 0:16:10.360000
 Nope, it didn't.

0:16:10.360000 --> 0:16:15.200000
 So this PNG is only going to be updated
 if I go to file save project,

0:16:15.200000 --> 0:16:19.900000
 then it will take a new image of whatever
 this is currently looking at

0:16:19.900000 --> 0:16:21.280000
 in the workspace.

0:16:21.280000 --> 0:16:24.040000
 So we've talked about the workspace
 and we've talked about the device

0:16:24.040000 --> 0:16:29.800000
 toolbar and what each of these buttons
 on the device toolbar represent.

0:16:29.800000 --> 0:16:32.860000
 So in the next video, I'm going to go
 into some of these other areas of

0:16:32.860000 --> 0:16:36.700000
 the GNS three application and the various
 different parts of the screen

0:16:36.700000 --> 0:16:38.480000
 and we'll talk about
 what they mean.

