1
00:00:03,134 --> 00:00:06,467
(musical sound effects)

2
00:00:09,218 --> 00:00:10,758
- [Keith] In this lesson I'd like to start

3
00:00:10,758 --> 00:00:12,297
by talking about one of the two ways

4
00:00:12,297 --> 00:00:15,198
that you can incorporate
switching into your

5
00:00:15,198 --> 00:00:18,468
GNS3 simulated network topology.

6
00:00:18,468 --> 00:00:20,443
Because chances are, I'm
guessing that if you're studying

7
00:00:20,443 --> 00:00:24,246
your CCNA, NP, or anything
else, you're gonna need

8
00:00:24,246 --> 00:00:26,610
to be able to practice
switching along with that.

9
00:00:26,610 --> 00:00:28,084
Now as far as switching is concerned,

10
00:00:28,084 --> 00:00:30,081
there's two basic ways to do that.

11
00:00:30,081 --> 00:00:33,031
There's several advanced
ways using L2, IOU,

12
00:00:33,031 --> 00:00:35,489
and other stuff I'm not gonna
get into in this series,

13
00:00:35,489 --> 00:00:37,659
but there's two basic
ways that you can do that

14
00:00:37,659 --> 00:00:40,873
if you're sort of a new
or intermediate GNS3 user.

15
00:00:40,873 --> 00:00:44,073
One is to use what's called
a built-in switch node,

16
00:00:44,073 --> 00:00:47,267
and the other is to import
in a router that acts

17
00:00:47,267 --> 00:00:49,703
like a switch called an ether switch.

18
00:00:49,703 --> 00:00:50,839
So in this particular video,

19
00:00:50,839 --> 00:00:52,503
I'm gonna be focusing in on the first one,

20
00:00:52,503 --> 00:00:57,079
built-in switch node, so let's
talk a little bit about that.

21
00:00:57,079 --> 00:00:59,412
So here is my GNS3 topology,

22
00:01:00,492 --> 00:01:01,935
and in this particular case it's already

23
00:01:01,935 --> 00:01:04,371
fully functioning and built,

24
00:01:04,371 --> 00:01:07,495
and I've used a built-in switch node,

25
00:01:07,495 --> 00:01:10,415
so this is what the built-in
switch node looks like,

26
00:01:10,415 --> 00:01:13,138
and where you would get that from,

27
00:01:13,138 --> 00:01:17,055
is from right here in
the device notes section.

28
00:01:18,290 --> 00:01:20,099
This section right here is where you find

29
00:01:20,099 --> 00:01:22,266
your switches, so here's
the various routers

30
00:01:22,266 --> 00:01:23,550
that are available to you,

31
00:01:23,550 --> 00:01:27,709
and here's where you find your
various layer two switches.

32
00:01:27,709 --> 00:01:30,297
And the Ethernet switch is
the one that we're gonna be

33
00:01:30,297 --> 00:01:31,418
focusing in on today,

34
00:01:31,418 --> 00:01:33,436
and you can just drag and drop that,

35
00:01:33,436 --> 00:01:35,035
just like anything else.

36
00:01:35,035 --> 00:01:36,857
Now the Ethernet switch,
if you choose to use that,

37
00:01:36,857 --> 00:01:38,618
one of the nice things about that is,

38
00:01:38,618 --> 00:01:40,897
like I said it's a built-in node,

39
00:01:40,897 --> 00:01:44,107
built in to GNS3 so,
it doesn't require any

40
00:01:44,107 --> 00:01:47,463
IOS, it actually is
not even configured via

41
00:01:47,463 --> 00:01:49,551
command line at all, you just configure it

42
00:01:49,551 --> 00:01:51,788
via a very basic GUI.

43
00:01:51,788 --> 00:01:53,904
Now this built-in switch
node, like I said,

44
00:01:53,904 --> 00:01:55,404
very basic device.

45
00:01:56,704 --> 00:01:59,215
Really the only thing you're
ever gonna want to use it for,

46
00:01:59,215 --> 00:02:02,523
is one of two things, either
segmenting your network

47
00:02:02,523 --> 00:02:06,919
into different VLANS, or I
guess it could be an and,

48
00:02:06,919 --> 00:02:09,075
using 802.1Q trunking.

49
00:02:09,075 --> 00:02:10,648
So those are really the only two things.

50
00:02:10,648 --> 00:02:12,789
This built-in switch node
does not do anything else.

51
00:02:12,789 --> 00:02:15,818
It does not do any of
the CISCO stuff like DTP

52
00:02:15,818 --> 00:02:18,235
or VTP, or CDP, none of that.

53
00:02:19,289 --> 00:02:20,442
As a matter of fact, these switching nodes

54
00:02:20,442 --> 00:02:23,792
don't even do Spanning Tree,
so be very careful about that,

55
00:02:23,792 --> 00:02:26,164
because if you actually
do put two or more of them

56
00:02:26,164 --> 00:02:28,224
in your topology and you
connect them together,

57
00:02:28,224 --> 00:02:31,042
you can very quickly
create a bridging loop,

58
00:02:31,042 --> 00:02:33,230
because there's nothing to
prevent the bridging loop,

59
00:02:33,230 --> 00:02:35,064
there is no Spanning Tree in here,

60
00:02:35,064 --> 00:02:37,961
so that is something to be wary of.

61
00:02:37,961 --> 00:02:40,425
So in this particular environment,

62
00:02:40,425 --> 00:02:42,773
I'll go ahead and get rid
of it by just right clicking

63
00:02:42,773 --> 00:02:44,639
on it and then selecting delete,

64
00:02:44,639 --> 00:02:46,466
because I don't need that one.

65
00:02:46,466 --> 00:02:49,216
In this particular case, all
I'm doing is I've got four PC's

66
00:02:49,216 --> 00:02:52,066
which are segmented into
two different VLANs,

67
00:02:52,066 --> 00:02:56,129
a VLAN for payroll, and a
VLAN for human resources.

68
00:02:56,129 --> 00:02:59,373
And maybe what I want to do,
maybe the objective of this lab

69
00:02:59,373 --> 00:03:02,069
was simply to practice
the router on a stick,

70
00:03:02,069 --> 00:03:04,575
so I didn't really care
about practicing the switch,

71
00:03:04,575 --> 00:03:06,305
I just wanted to practice
how to create a router

72
00:03:06,305 --> 00:03:08,769
on a stick for the router.

73
00:03:08,769 --> 00:03:10,230
So maybe that was my objective.

74
00:03:10,230 --> 00:03:11,345
Now in this particular case,

75
00:03:11,345 --> 00:03:12,748
all this is already up,

76
00:03:12,748 --> 00:03:14,681
the router has already
been pre-configured,

77
00:03:14,681 --> 00:03:15,931
and what I want to do is show you,

78
00:03:15,931 --> 00:03:17,958
how did I get to this point?

79
00:03:17,958 --> 00:03:21,443
How did I get this switch in
here, and how did I configure

80
00:03:21,443 --> 00:03:24,471
it in such a way that
two of its interfaces,

81
00:03:24,471 --> 00:03:29,446
these two right here, would
be in one VLAN, like VLAN one,

82
00:03:29,446 --> 00:03:31,788
and these two interfaces right
here would be in a completely

83
00:03:31,788 --> 00:03:35,446
different VLAN, and this
interface right here

84
00:03:35,446 --> 00:03:39,774
was 802.1Q, because
that's what was necessary

85
00:03:39,774 --> 00:03:42,490
in order to make this topology work.

86
00:03:42,490 --> 00:03:43,736
So how did I do it?

87
00:03:43,736 --> 00:03:46,219
All right so let's start,
let's go back a little bit,

88
00:03:46,219 --> 00:03:48,377
and start by getting rid of the switch.

89
00:03:48,377 --> 00:03:51,294
Right click it, select delete, yes.

90
00:03:52,271 --> 00:03:54,391
And when I delete it,
all of the links I've had

91
00:03:54,391 --> 00:03:57,705
to various devices are also deleted.

92
00:03:57,705 --> 00:04:00,372
Okay so, let's go back into here

93
00:04:02,295 --> 00:04:05,870
and open up my switching
section, there we go,

94
00:04:05,870 --> 00:04:08,925
and I'll drag and drop my Ethernet switch

95
00:04:08,925 --> 00:04:10,939
into the topology.

96
00:04:10,939 --> 00:04:12,046
All right so there it is.

97
00:04:12,046 --> 00:04:14,556
And notice that as a built-in node,

98
00:04:14,556 --> 00:04:17,640
the moment you drag and
drop it, notice over here,

99
00:04:17,640 --> 00:04:20,552
on the right, how it's already green.

100
00:04:20,552 --> 00:04:22,483
So it's already on,
it's already activated,

101
00:04:22,483 --> 00:04:24,806
there's no shutting down
of this particular device,

102
00:04:24,806 --> 00:04:26,723
it's just always there.

103
00:04:27,562 --> 00:04:29,804
Okay so now if I right click on it,

104
00:04:29,804 --> 00:04:31,742
remember this doesn't have
any kind of command line,

105
00:04:31,742 --> 00:04:33,969
so the way you would actually
configure its interface

106
00:04:33,969 --> 00:04:36,619
is by selecting the configure option,

107
00:04:36,619 --> 00:04:38,908
the very first option.

108
00:04:38,908 --> 00:04:41,882
So as you can see, what it
comes up with by default,

109
00:04:41,882 --> 00:04:45,913
are eight interfaces, all of
which are static access ports,

110
00:04:45,913 --> 00:04:49,048
all of which are in VLAN one.

111
00:04:49,048 --> 00:04:50,961
If I wanna add a new interface,

112
00:04:50,961 --> 00:04:52,564
you can see it's already
set up and ready to go,

113
00:04:52,564 --> 00:04:55,815
so if I click the add button, it will add

114
00:04:55,815 --> 00:04:58,091
interface number nine,
or port number nine,

115
00:04:58,091 --> 00:05:01,161
there will be an access port,
and it'll be in VLAN one,

116
00:05:01,161 --> 00:05:03,009
so boop, there we go.

117
00:05:03,009 --> 00:05:04,567
Now if I wanna add another interface,

118
00:05:04,567 --> 00:05:06,253
interface number ten,
maybe I want that to be

119
00:05:06,253 --> 00:05:08,994
in a different VLAN, so
you can just change that,

120
00:05:08,994 --> 00:05:11,427
hit add, boop, there you go again.

121
00:05:11,427 --> 00:05:12,889
Maybe I wanna add a new interface,

122
00:05:12,889 --> 00:05:15,398
interface 11, and I want it to be 802.1Q,

123
00:05:15,398 --> 00:05:19,256
so you can see your options
here from the drop down menu.

124
00:05:19,256 --> 00:05:22,422
Now when I make this as 802.1Q port,

125
00:05:22,422 --> 00:05:26,370
the VLAN referenced here,
is gonna be the native VLAN.

126
00:05:26,370 --> 00:05:29,057
So I might not want VLAN
five as the native VLAN

127
00:05:29,057 --> 00:05:33,224
for my 802.1Q trunk, so I'll
set that back down to one.

128
00:05:34,301 --> 00:05:36,690
And you can see here
how it's been created.

129
00:05:36,690 --> 00:05:39,155
So adding new interfaces, pretty easy.

130
00:05:39,155 --> 00:05:40,991
I've actually read that
this switch can support

131
00:05:40,991 --> 00:05:44,658
like up to 10,000 VLAN's,
some crazy number.

132
00:05:45,893 --> 00:05:49,748
Now, what if you want to
modify an existing port?

133
00:05:49,748 --> 00:05:51,445
That, you cannot do.

134
00:05:51,445 --> 00:05:53,040
So for example, let me, first of all

135
00:05:53,040 --> 00:05:55,133
you have to double click
on a port to select it,

136
00:05:55,133 --> 00:05:57,847
double click, double click.

137
00:05:57,847 --> 00:06:00,312
And if I wanted to change port number one

138
00:06:00,312 --> 00:06:02,195
to be an access port in
VLAN two, you might think

139
00:06:02,195 --> 00:06:06,278
okay, we'll just change
that, and then hit apply.

140
00:06:08,736 --> 00:06:10,624
But look, nothing happened.

141
00:06:10,624 --> 00:06:12,691
It's still an access port in VLAN one,

142
00:06:12,691 --> 00:06:14,150
it didn't change anything.

143
00:06:14,150 --> 00:06:15,826
Similarly, if I wanted to
change one of these existing

144
00:06:15,826 --> 00:06:20,484
ports into an 802.1Q
trunk, that wouldn't work.

145
00:06:20,484 --> 00:06:21,913
So what's the moral of this story?

146
00:06:21,913 --> 00:06:25,413
Well, if you want to take an existing port

147
00:06:26,738 --> 00:06:28,632
and change its characteristics,

148
00:06:28,632 --> 00:06:30,430
you have to delete it first.

149
00:06:30,430 --> 00:06:31,645
So I'm just gonna delete everything,

150
00:06:31,645 --> 00:06:33,565
I'm gonna start with port number one,

151
00:06:33,565 --> 00:06:36,250
and delete everything that's in there.

152
00:06:36,250 --> 00:06:38,145
Okay all the ports are gone,

153
00:06:38,145 --> 00:06:41,503
and now for the purposes of my topology,

154
00:06:41,503 --> 00:06:44,718
what I'm gonna do is, I'm
gonna have ports one and two

155
00:06:44,718 --> 00:06:48,019
leading to these two PC's and VLAN one.

156
00:06:48,019 --> 00:06:50,699
I'll have ports three and
four leading to these PC's

157
00:06:50,699 --> 00:06:53,998
in VLAN two, and then
I'll have port number five

158
00:06:53,998 --> 00:06:55,581
as an 802.1Q trunk.

159
00:06:56,764 --> 00:07:01,312
So once again right click
and select configure.

160
00:07:01,312 --> 00:07:03,379
So port number one is already by default

161
00:07:03,379 --> 00:07:05,208
gonna be an access port in VLAN one,

162
00:07:05,208 --> 00:07:07,416
so I'll just hit add, port number two

163
00:07:07,416 --> 00:07:09,085
I'll just add that, that's okay.

164
00:07:09,085 --> 00:07:12,208
Port number three, before I
create it, that's the key,

165
00:07:12,208 --> 00:07:15,161
before you create it, I'm
gonna change the VLAN to two,

166
00:07:15,161 --> 00:07:18,293
add it, port number four I
also want to be in VLAN two,

167
00:07:18,293 --> 00:07:19,126
so add it.

168
00:07:20,179 --> 00:07:21,594
And by the way, you
can also see right here

169
00:07:21,594 --> 00:07:25,136
that you can change the name
of the switch, if you wish.

170
00:07:25,136 --> 00:07:27,306
And then port number
five, I'm gonna have that

171
00:07:27,306 --> 00:07:29,893
as an 802.1Q port, and I'm gonna have

172
00:07:29,893 --> 00:07:31,810
the native VLAN as one.

173
00:07:33,209 --> 00:07:36,042
And then hit apply, and then okay.

174
00:07:36,980 --> 00:07:38,425
So now it's ready.

175
00:07:38,425 --> 00:07:39,672
Another way that you can verify,

176
00:07:39,672 --> 00:07:41,029
if you're taking a look at a switch,

177
00:07:41,029 --> 00:07:43,341
an Ethernet switch, and you
wonder how it's configured,

178
00:07:43,341 --> 00:07:44,865
all you have to do it hover over it.

179
00:07:44,865 --> 00:07:46,546
So put your mouse over it, hover there,

180
00:07:46,546 --> 00:07:48,458
and then it'll tell you.

181
00:07:48,458 --> 00:07:50,849
Now in this particular case,

182
00:07:50,849 --> 00:07:53,505
it's saying the ports are empty
because it's not connected

183
00:07:53,505 --> 00:07:54,338
to anything yet.

184
00:07:54,338 --> 00:07:56,458
So once I actually connect
those ports to something

185
00:07:56,458 --> 00:07:58,572
and then I hover over it,

186
00:07:58,572 --> 00:08:00,201
I'll actually see a lot more stuff.

187
00:08:00,201 --> 00:08:03,096
I'll see if it's trunking,
I'll see if it's in a VLAN,

188
00:08:03,096 --> 00:08:04,283
I'll see all that.

189
00:08:04,283 --> 00:08:06,795
So, let's do that next.

190
00:08:06,795 --> 00:08:10,610
So now I'm gonna go to my
connect or add a link tool,

191
00:08:10,610 --> 00:08:12,233
just click that.

192
00:08:12,233 --> 00:08:14,183
All right, so I'll select port number one,

193
00:08:14,183 --> 00:08:15,593
I'll just click on port one,

194
00:08:15,593 --> 00:08:17,329
and I'll go over here to my first PC

195
00:08:17,329 --> 00:08:19,329
and select his Ethernet.

196
00:08:20,334 --> 00:08:23,290
Select port number two,
go to my second PC,

197
00:08:23,290 --> 00:08:27,457
and I'll just keep doing
that for the remaining PC's.

198
00:08:30,092 --> 00:08:31,359
And also in this particular lab,

199
00:08:31,359 --> 00:08:33,374
I'm using another built-in node,

200
00:08:33,374 --> 00:08:35,449
the virtual PC simulator.

201
00:08:35,449 --> 00:08:37,697
Not gonna talk about that
in great detail right now,

202
00:08:37,697 --> 00:08:40,368
we'll get into that in a subsequent video.

203
00:08:40,368 --> 00:08:41,803
And then lastly, we'll
take port number five

204
00:08:41,803 --> 00:08:44,252
which has already been
pre-configured as a trunk,

205
00:08:44,252 --> 00:08:47,713
and connect it to fast
Ethernet zero one on my switch,

206
00:08:47,713 --> 00:08:49,769
on my router, that is.

207
00:08:49,769 --> 00:08:51,232
Deselect the link tool,

208
00:08:51,232 --> 00:08:52,909
because I don't want
to add any more links.

209
00:08:52,909 --> 00:08:54,188
Some of this stuff looks kinda messy,

210
00:08:54,188 --> 00:08:57,569
which is nice because I
can drag this stuff around,

211
00:08:57,569 --> 00:09:01,356
to make it a little bit
more easily visible.

212
00:09:01,356 --> 00:09:04,812
So if for some reason I wanna
take a screenshot of this,

213
00:09:04,812 --> 00:09:07,495
or just for my own benefit,
I can actually read it

214
00:09:07,495 --> 00:09:09,162
a little bit easier.

215
00:09:10,280 --> 00:09:14,629
Now let's just move the name
of the switch down here.

216
00:09:14,629 --> 00:09:16,009
And now we should be good to go.

217
00:09:16,009 --> 00:09:17,005
Now in this particular case,

218
00:09:17,005 --> 00:09:18,951
the router's already pre-configured,

219
00:09:18,951 --> 00:09:22,847
and now if I hover over
the switch at this point,

220
00:09:22,847 --> 00:09:25,102
and zoom in there, now you can see,

221
00:09:25,102 --> 00:09:28,313
for example, port one is
access mode in VLAN one,

222
00:09:28,313 --> 00:09:30,732
port three is in access mode, VLAN two,

223
00:09:30,732 --> 00:09:35,199
and port five is .1Q,
with a native VLAN of one,

224
00:09:35,199 --> 00:09:36,769
that tells you what it's connected to.

225
00:09:36,769 --> 00:09:37,950
So that's sort of a nice way to get

226
00:09:37,950 --> 00:09:40,450
a status update on the device.

227
00:09:41,828 --> 00:09:42,991
Everything is green right now,

228
00:09:42,991 --> 00:09:45,588
so let me go into one of my
virtual PC's and make sure

229
00:09:45,588 --> 00:09:47,505
it's got an IP address.

230
00:09:51,459 --> 00:09:55,722
And it does, let's see if
he can ping his counterpart,

231
00:09:55,722 --> 00:09:59,472
PC two, who's also in
the payroll department.

232
00:10:05,183 --> 00:10:08,766
Not reachable, okay,
so let's check PC two.

233
00:10:11,457 --> 00:10:12,290
Show IP.

234
00:10:14,543 --> 00:10:18,013
All right, so he was, he does
have the correct IP address.

235
00:10:18,013 --> 00:10:20,485
Actually, I have seen this before,

236
00:10:20,485 --> 00:10:23,658
where everything is set up correctly,

237
00:10:23,658 --> 00:10:24,777
but they're not ping-able,

238
00:10:24,777 --> 00:10:26,037
and what I've had to do

239
00:10:26,037 --> 00:10:29,040
in this particular situation actually is,

240
00:10:29,040 --> 00:10:31,624
actually before I disconnect,

241
00:10:31,624 --> 00:10:35,124
I wanna save my configuration on the PC's.

242
00:10:38,669 --> 00:10:40,358
Close this, and what I've seen,

243
00:10:40,358 --> 00:10:41,853
what I have to do to make
this work is basically

244
00:10:41,853 --> 00:10:46,240
to shut everything down, so
click the stop all devices

245
00:10:46,240 --> 00:10:47,573
button, up here.

246
00:10:51,104 --> 00:10:54,883
And you can see that stops
everything but the switch,

247
00:10:54,883 --> 00:10:58,050
and now turn everything back on again.

248
00:10:59,532 --> 00:11:01,615
Let's go back into my PC.

249
00:11:03,813 --> 00:11:04,980
Show, show IP.

250
00:11:07,096 --> 00:11:09,203
He still has his IP address,
now let's see if he can ping

251
00:11:09,203 --> 00:11:13,198
the other PC in the
same VLAN, and it works.

252
00:11:13,198 --> 00:11:15,121
Not sure why you have
to take that extra step,

253
00:11:15,121 --> 00:11:17,675
but in the particular
case it was necessary

254
00:11:17,675 --> 00:11:21,060
to stop and restart everything.

255
00:11:21,060 --> 00:11:24,377
And so that's the basics
of the Ethernet switch,

256
00:11:24,377 --> 00:11:26,011
real simple, as you can see once again,

257
00:11:26,011 --> 00:11:29,550
just right click it, hit configure,

258
00:11:29,550 --> 00:11:32,730
and then you can modify the various ports.

259
00:11:32,730 --> 00:11:34,526
Now as you can see,
there's a few other options

260
00:11:34,526 --> 00:11:37,629
available to you here
when you right click,

261
00:11:37,629 --> 00:11:39,063
such as change the host name,

262
00:11:39,063 --> 00:11:41,548
which is something we're
actually able to do

263
00:11:41,548 --> 00:11:44,296
in that GUI, change the symbol,

264
00:11:44,296 --> 00:11:45,796
if you wanna change it from this switch

265
00:11:45,796 --> 00:11:48,169
to one of the other switch types you can.

266
00:11:48,169 --> 00:11:50,521
Capture, if I selected
this I could actually

267
00:11:50,521 --> 00:11:52,395
do in a wireshark capture,

268
00:11:52,395 --> 00:11:54,724
and it would first prompt
me for what interface

269
00:11:54,724 --> 00:11:56,561
I want to capture on,

270
00:11:56,561 --> 00:11:57,966
and then once it's started,

271
00:11:57,966 --> 00:11:59,316
every packet going in and out

272
00:11:59,316 --> 00:12:00,726
would be displayed in wireshark,

273
00:12:00,726 --> 00:12:02,203
and I'll go ahead and do
that in a subsequent video

274
00:12:02,203 --> 00:12:04,154
where I can focus exclusively

275
00:12:04,154 --> 00:12:07,071
on wireshark interaction with this.

276
00:12:08,173 --> 00:12:09,530
And raising and lowering one layer,

277
00:12:09,530 --> 00:12:11,307
we've already talked about
that when I talked about

278
00:12:11,307 --> 00:12:15,655
adding circles or adding
squares into your topology.

279
00:12:15,655 --> 00:12:18,313
And then of course, there is delete.

280
00:12:18,313 --> 00:12:20,111
So that concludes this particular section

281
00:12:20,111 --> 00:12:22,253
on the built-in switch node.

282
00:12:22,253 --> 00:12:24,125
In the next section, we're gonna look at

283
00:12:24,125 --> 00:12:26,490
actually dragging and dropping a router

284
00:12:26,490 --> 00:12:28,727
that has a special module in it called

285
00:12:28,727 --> 00:12:30,502
the ether switch module.

286
00:12:30,502 --> 00:12:32,268
And that's gonna be useful
for you if you actually

287
00:12:32,268 --> 00:12:35,008
wanna practice IOS switching commands,

288
00:12:35,008 --> 00:12:37,352
like Spanning Tree, trunking,

289
00:12:37,352 --> 00:12:39,685
PortFast, and a range of other stuff.

290
00:12:39,685 --> 00:12:42,685
So we'll see that in the next video.

