WEBVTT

0:00:08.480000 --> 0:00:12.520000
 So let's turn our attention to yet
 another one of the built-in nodes.

0:00:12.520000 --> 0:00:16.140000
 Previously, you spent some good time
 on the Ethernet switch node.

0:00:16.140000 --> 0:00:19.580000
 Now let's just take a look real briefly
 at the hub node so we can see

0:00:19.580000 --> 0:00:30.240000
 what that does. So here within the devices
 section, if we have the Ethernet

0:00:30.240000 --> 0:00:36.040000
 hub. Once again, because that's a built
-in node, doesn't require any particular

0:00:36.040000 --> 0:00:39.200000
 iOS, it's not even running iOS, it's
 just going to have a real simple

0:00:39.200000 --> 0:00:41.360000
 GUI to configure that.

0:00:41.360000 --> 0:00:45.540000
 So just drag and drop that which
 is what I've done right here.

0:00:45.540000 --> 0:00:48.120000
 And then to configure it, just like
 we did the Ethernet switch, we're

0:00:48.120000 --> 0:00:51.980000
 just going to right click on
 it and select configure.

0:00:51.980000 --> 0:00:53.640000
 And really there's not
 much to configure here.

0:00:53.640000 --> 0:00:56.500000
 You can change the name or you can
 change the quantity of ports.

0:00:56.500000 --> 0:01:00.020000
 By default it's eight ports, you can
 raise or lower that if you wish.

0:01:00.020000 --> 0:01:02.120000
 But that's it. It is
 just a plain hub.

0:01:02.120000 --> 0:01:04.960000
 It doesn't involve VLANs
 or anything like that.

0:01:04.960000 --> 0:01:08.100000
 So in this particular topology, I've
 just placed the hub into it.

0:01:08.100000 --> 0:01:11.520000
 I've connected it to all of my various
 interfaces and to verify that it

0:01:11.520000 --> 0:01:17.300000
 works, I can just ping
 from one PC to another.

0:01:17.300000 --> 0:01:21.760000
 And that's really all
 there is to it.

0:01:21.760000 --> 0:01:24.600000
 The hub is a pretty simple
 built-in node.

