1
00:00:02,488 --> 00:00:05,321
(energetic music)

2
00:00:08,709 --> 00:00:09,991
- In this video, we're gonna look at

3
00:00:09,991 --> 00:00:12,380
yet another one of the built-in nodes

4
00:00:12,380 --> 00:00:16,175
that's built into GNS3, which
is the Frame-Relay switch.

5
00:00:16,175 --> 00:00:17,501
Chances are, if you're studying for

6
00:00:17,501 --> 00:00:19,661
some kind of Cisco certification test,

7
00:00:19,661 --> 00:00:20,494
they're gonna want you to know

8
00:00:20,494 --> 00:00:21,756
how to configure Frame Relay,

9
00:00:21,756 --> 00:00:24,051
at least from the
perspective of the router,

10
00:00:24,051 --> 00:00:26,637
connecting into the Frame Relay cloud.

11
00:00:26,637 --> 00:00:28,631
So, we need something in that cloud

12
00:00:28,631 --> 00:00:31,009
to provide those Frame Relay connections,

13
00:00:31,009 --> 00:00:32,102
and here's where we're gonna use

14
00:00:32,102 --> 00:00:35,514
the Frame-Relay switch
that's built into GNS3.

15
00:00:35,514 --> 00:00:37,619
So, before we get started,

16
00:00:37,619 --> 00:00:39,647
this is the topology
that I'm going to build.

17
00:00:39,647 --> 00:00:41,456
This is my objective, so

18
00:00:41,456 --> 00:00:43,046
any lab that you're building up,

19
00:00:43,046 --> 00:00:44,763
it's always a good idea to write down

20
00:00:44,763 --> 00:00:47,633
a quick sketch on a piece
of paper or something

21
00:00:47,633 --> 00:00:49,628
of what it is that you're
trying to accomplish,

22
00:00:49,628 --> 00:00:50,823
what you're trying to build.

23
00:00:50,823 --> 00:00:52,535
So, in this particular case,

24
00:00:52,535 --> 00:00:55,633
R2 is actually gonna
have a total of two PVCs,

25
00:00:55,633 --> 00:00:58,484
two Frame Relay permanent
virtual circuits.

26
00:00:58,484 --> 00:01:02,588
From R2 to R4, that's
gonna be one of our PVCs,

27
00:01:02,588 --> 00:01:06,088
and then another one, from R2 going to R3.

28
00:01:06,942 --> 00:01:09,292
And we can see here that I've
selected the DLCI numbers

29
00:01:09,292 --> 00:01:12,167
that I'd like to use for each of these.

30
00:01:12,167 --> 00:01:14,364
Now, much of this, in order
to save time on this video,

31
00:01:14,364 --> 00:01:16,749
has already been built up in GNS3,

32
00:01:16,749 --> 00:01:19,771
I've already put in the
virtual PCs, the routers,

33
00:01:19,771 --> 00:01:22,376
I've already got my IP
addresses and routing going on,

34
00:01:22,376 --> 00:01:23,742
so, really, I'm just gonna show you

35
00:01:23,742 --> 00:01:26,035
how to configure the Frame-Relay switch.

36
00:01:26,035 --> 00:01:27,869
The purpose of this video is not

37
00:01:27,869 --> 00:01:29,550
to show you how to configure the various

38
00:01:29,550 --> 00:01:33,657
Frame Relay commands within
Cisco iOS on your routers.

39
00:01:33,657 --> 00:01:34,729
That's not what this is for.

40
00:01:34,729 --> 00:01:36,416
This is just purely to show you

41
00:01:36,416 --> 00:01:39,296
how to drag and drop the
Frame-Relay switch in there,

42
00:01:39,296 --> 00:01:40,710
set up its interfaces,

43
00:01:40,710 --> 00:01:43,901
and make sure that it has the
DLCI numbers that you wish.

44
00:01:43,901 --> 00:01:46,548
So, let's take a look
at how we can do that.

45
00:01:46,548 --> 00:01:49,401
So, here we go, most of
this is already set up.

46
00:01:49,401 --> 00:01:53,739
So, over here, within
the switches category,

47
00:01:53,739 --> 00:01:56,091
the very last one is
our Frame-Relay switch,

48
00:01:56,091 --> 00:02:00,326
so we can just drag and
drop that into place.

49
00:02:00,326 --> 00:02:01,873
And, just like the Ethernet switch was

50
00:02:01,873 --> 00:02:03,778
automatically on, the Frame-Relay switch,

51
00:02:03,778 --> 00:02:06,739
as you can see here,
also is automatically on.

52
00:02:06,739 --> 00:02:09,201
Status light is green.

53
00:02:09,201 --> 00:02:10,522
And, just like the Ethernet switch,

54
00:02:10,522 --> 00:02:12,753
where there was no
command line to configure,

55
00:02:12,753 --> 00:02:14,229
we had to do it via the GUI,

56
00:02:14,229 --> 00:02:15,950
same thing here with
the Frame-Relay switch.

57
00:02:15,950 --> 00:02:17,463
Just right-click,

58
00:02:17,463 --> 00:02:21,171
and from the right-click
menu, just select configure,

59
00:02:21,171 --> 00:02:23,939
which will bring up this box, right here.

60
00:02:23,939 --> 00:02:25,527
And now, all we need to do is

61
00:02:25,527 --> 00:02:29,694
map these various ports with
what we want in our diagram.

62
00:02:30,659 --> 00:02:35,337
So, if I take a look,
once again, at my diagram,

63
00:02:35,337 --> 00:02:36,965
I want port number one

64
00:02:36,965 --> 00:02:39,001
to have, actually, two DLCIs on it.

65
00:02:39,001 --> 00:02:40,598
I'm gonna have to do this one at a time.

66
00:02:40,598 --> 00:02:44,230
So, DLCI number 101, on port one,

67
00:02:44,230 --> 00:02:48,886
should be mapped to DLCI 202 on port two.

68
00:02:48,886 --> 00:02:50,119
We're almost there, except,

69
00:02:50,119 --> 00:02:52,305
instead of being mapped
to DLCI 202 on port two,

70
00:02:52,305 --> 00:02:54,953
it's being mapped to DLCI 202 on port 10,

71
00:02:54,953 --> 00:02:57,059
so that's the only thing I need to fix.

72
00:02:57,059 --> 00:03:00,500
Just change that to port two, click add.

73
00:03:00,500 --> 00:03:02,351
So, just with that one click of a button

74
00:03:02,351 --> 00:03:03,704
and changing that port number,

75
00:03:03,704 --> 00:03:06,942
we have now created the red
permanent virtual circuit,

76
00:03:06,942 --> 00:03:09,795
from R2 to R3.

77
00:03:09,795 --> 00:03:11,749
Now, let's create the purple

78
00:03:11,749 --> 00:03:15,799
permanent virtual circuit, from R2 to R4.

79
00:03:15,799 --> 00:03:18,216
So, that's gonna be DLCI 102.

80
00:03:19,480 --> 00:03:21,157
Okay, so the DLCI number here is correct,

81
00:03:21,157 --> 00:03:22,213
but the port number's wrong.

82
00:03:22,213 --> 00:03:24,317
We need to put it back on port number one,

83
00:03:24,317 --> 00:03:27,277
and that should be going
out port number three,

84
00:03:27,277 --> 00:03:30,388
which is DLCI 203, and that is correct.

85
00:03:30,388 --> 00:03:34,555
So, let's just hit add, apply, and okay.

86
00:03:35,536 --> 00:03:36,830
So, that's really all we have to do

87
00:03:36,830 --> 00:03:39,277
from the standpoint of configuring
the Frame-Relay switch,

88
00:03:39,277 --> 00:03:40,778
it's pretty simple.

89
00:03:40,778 --> 00:03:42,698
Now we just need to
connect things together.

90
00:03:42,698 --> 00:03:44,867
Now, a little word of warning
or word of caution here.

91
00:03:44,867 --> 00:03:48,422
I don't know if this was
an intended feature or not,

92
00:03:48,422 --> 00:03:50,906
but I noticed when creating
this lab the first time

93
00:03:50,906 --> 00:03:52,788
that if I tried to link up

94
00:03:52,788 --> 00:03:54,336
using the add a connection tool,

95
00:03:54,336 --> 00:03:56,439
my Frame-Relay switch to my routers,

96
00:03:56,439 --> 00:03:58,963
while the routers were up and running,

97
00:03:58,963 --> 00:04:01,992
sometimes it worked,
sometimes it didn't work.

98
00:04:01,992 --> 00:04:05,073
I got a flashing message
that just wouldn't go away.

99
00:04:05,073 --> 00:04:07,796
So my suggestion to you would
be, in this particular case,

100
00:04:07,796 --> 00:04:11,428
make sure all of your routers
are powered off first,

101
00:04:11,428 --> 00:04:13,722
connect them via the connection tool

102
00:04:13,722 --> 00:04:16,348
to the Frame-Relay switch, and then

103
00:04:16,348 --> 00:04:18,285
turn the routers on afterwards.

104
00:04:18,285 --> 00:04:21,564
Don't connect them up
while the routers are on.

105
00:04:21,564 --> 00:04:22,732
So, at this moment,

106
00:04:22,732 --> 00:04:25,646
all of my routers, as
you can see, are off,

107
00:04:25,646 --> 00:04:27,396
which is what I want.

108
00:04:28,609 --> 00:04:31,009
So let's just start connecting things up.

109
00:04:31,009 --> 00:04:34,276
So, port number one
here, is gonna go to R2.

110
00:04:34,276 --> 00:04:38,148
I'll just connect it to Serial2/0.

111
00:04:38,148 --> 00:04:39,742
Port number two

112
00:04:39,742 --> 00:04:44,168
is gonna go to, once again, 2/0 on R3.

113
00:04:44,168 --> 00:04:46,067
And port number three

114
00:04:46,067 --> 00:04:49,484
is also gonna go to 2/0 on R4.

115
00:04:51,094 --> 00:04:52,594
Now, let's move my

116
00:04:53,772 --> 00:04:56,172
names of interfaces and stuff
around just a little bit

117
00:04:56,172 --> 00:04:58,739
so it's a little bit clearer.

118
00:04:58,739 --> 00:05:02,239
Let's drop my DLCIs into place.

119
00:05:06,129 --> 00:05:10,129
Let's drop my host IP addresses

120
00:05:11,158 --> 00:05:12,075
into place.

121
00:05:13,898 --> 00:05:14,744
There we go.

122
00:05:14,744 --> 00:05:16,796
Looks like everything is ready to go,

123
00:05:16,796 --> 00:05:18,763
so now let's just go ahead and turn on

124
00:05:18,763 --> 00:05:20,846
all of the other devices.

125
00:05:23,658 --> 00:05:25,560
Okay, so, how do we verify it works?

126
00:05:25,560 --> 00:05:27,747
Well, let's go to one
of these routers, here.

127
00:05:27,747 --> 00:05:30,125
Let's go to R4, as an example,

128
00:05:30,125 --> 00:05:33,286
and see if he learns about routes to the

129
00:05:33,286 --> 00:05:35,953
two network and the one network.

130
00:05:45,113 --> 00:05:46,246
And he does.

131
00:05:46,246 --> 00:05:48,663
He's learned via EIGRP the remote networks

132
00:05:48,663 --> 00:05:50,884
of 2.2.2,

133
00:05:50,884 --> 00:05:54,051
4.4.4, and 1.1.1.

134
00:05:55,934 --> 00:05:58,659
And, if everything is working correctly,

135
00:05:58,659 --> 00:06:03,292
PC1 should be able to ping across to PC3.

136
00:06:03,292 --> 00:06:04,739
But, even if that's not working,

137
00:06:04,739 --> 00:06:06,271
the Frame Relay is up and working.

138
00:06:06,271 --> 00:06:08,065
There's no way that R4 could've learned

139
00:06:08,065 --> 00:06:12,369
about the 2.2.2 or the 1.1.1 network

140
00:06:12,369 --> 00:06:15,582
unless it was done via Frame Relay.

141
00:06:15,582 --> 00:06:16,415
So, that's it.

142
00:06:16,415 --> 00:06:18,508
Dragging and dropping the
Frame Relay built-in node

143
00:06:18,508 --> 00:06:20,742
is actually pretty simple.

144
00:06:20,742 --> 00:06:23,575
(energetic music)

