WEBVTT

0:00:08.080000 --> 0:00:11.460000
 In this particular video, I'd like to
 show you how to use wire shark in

0:00:11.460000 --> 0:00:12.820000
 your GNS3 topology.

0:00:12.820000 --> 0:00:16.660000
 So you can actually use this to do packet
 captures and learn more about

0:00:16.660000 --> 0:00:19.120000
 how various protocols work
 and things like that.

0:00:19.120000 --> 0:00:21.080000
 So let's take a look at this.

0:00:21.080000 --> 0:00:25.980000
 Now when you've initially downloaded
 GNS3, you were presented with a box

0:00:25.980000 --> 0:00:28.700000
 that had a whole bunch of applications
 that were built into it.

0:00:28.700000 --> 0:00:32.500000
 And hopefully, you allowed it to also
 download wire shark as part of its

0:00:32.500000 --> 0:00:34.040000
 download process.

0:00:34.040000 --> 0:00:37.380000
 If you did, using wire shark
 in here is super easy.

0:00:37.380000 --> 0:00:39.700000
 Just select a device
 that you wish.

0:00:39.700000 --> 0:00:43.560000
 For example, I'm going to do this
 router right here and right click.

0:00:43.560000 --> 0:00:48.240000
 And you can see here in your options under
 right click, the capture option.

0:00:48.240000 --> 0:00:51.520000
 So now when I select capture, it's
 going to ask me which interface on

0:00:51.520000 --> 0:00:54.180000
 this device do I wish to
 start capturing packets?

0:00:54.180000 --> 0:00:57.320000
 And I'm going to select the serial
 interface because I want to learn a

0:00:57.320000 --> 0:01:00.180000
 little bit more about frame relay and
 see what frame relay headers look

0:01:00.180000 --> 0:01:05.300000
 like. And I want to see what EIGRP is doing
 across this frame relay connection.

0:01:05.300000 --> 0:01:09.460000
 So as soon as I click this, wire
 shark is going to start up.

0:01:09.460000 --> 0:01:14.480000
 Let's hit OK. And it's going
 to start collecting packets.

0:01:14.480000 --> 0:01:20.260000
 There it goes. Now while it's doing
 that, let's go ahead and bring up

0:01:20.260000 --> 0:01:29.480000
 router two, who was
 an EIGRP neighbor.

0:01:29.480000 --> 0:01:34.100000
 And here we can see the
 EIGRP process happening.

0:01:34.100000 --> 0:01:35.720000
 So you can see it's very useful.

0:01:35.720000 --> 0:01:43.700000
 So from here, because wire shark has
 been built into GNS3, we can use

0:01:43.700000 --> 0:01:46.460000
 it to capture things
 on any interface.

0:01:46.460000 --> 0:01:51.060000
 And what's real where this becomes really
 powerful is that let's say that

0:01:51.060000 --> 0:01:52.600000
 you had your own home base lab.

0:01:52.600000 --> 0:01:54.580000
 A rack right next to you.

0:01:54.580000 --> 0:01:58.700000
 Well, certainly if you had a hub or
 something, you could use plug a hub

0:01:58.700000 --> 0:02:01.940000
 in between two routers or a router and
 a switch and then plug your laptop

0:02:01.940000 --> 0:02:06.260000
 into that hub and use wire shark on
 your laptop to capture stuff going

0:02:06.260000 --> 0:02:07.840000
 across that ethernet interface.

0:02:07.840000 --> 0:02:11.520000
 Pretty simple. But what if you wanted
 to capture traffic on a WAN interface

0:02:11.520000 --> 0:02:13.500000
 like a serial interface?

0:02:13.500000 --> 0:02:16.420000
 You wanted to see your
 frame relay headers.

0:02:16.420000 --> 0:02:19.700000
 Or maybe you're doing PPP and you want
 to see what all the PPP, the point

0:02:19.700000 --> 0:02:21.360000
 to point protocol looks like.

0:02:21.360000 --> 0:02:23.940000
 Kind of hard to do that
 with real equipment.

0:02:23.940000 --> 0:02:27.820000
 But you can see here, because wire shark
 is built into this virtual environment,

0:02:27.820000 --> 0:02:31.980000
 it's super easy to just right click on
 any router and select any interface

0:02:31.980000 --> 0:02:37.220000
 you want on that router so you can see all
 the layer two headers and everything.

0:02:37.220000 --> 0:02:40.860000
 So that concludes this discussion on
 using wire shark within the context

