1
00:00:02,607 --> 00:00:05,357
(iNE jingle)

2
00:00:08,956 --> 00:00:10,075
- In this video, I'd like to talk about

3
00:00:10,075 --> 00:00:12,841
a very useful tool within GNS3.

4
00:00:12,841 --> 00:00:15,276
It's an optional tool,
but it, like I said,

5
00:00:15,276 --> 00:00:18,156
can be very useful to you,
called the Snapshot tool.

6
00:00:18,156 --> 00:00:20,394
So first of all, let
me paint you a picture.

7
00:00:20,394 --> 00:00:23,644
Let's start with a basic GNS3 topology,

8
00:00:24,787 --> 00:00:26,959
such as this one.

9
00:00:26,959 --> 00:00:28,912
I'll zoom in on this here.

10
00:00:28,912 --> 00:00:32,992
So, let's say my objective
here is to practice EIGRP,

11
00:00:32,992 --> 00:00:37,294
maybe by itself, then
practice OSPF by itself,

12
00:00:37,294 --> 00:00:40,530
and then maybe practice
the redistribution of EIGRP

13
00:00:40,530 --> 00:00:42,969
into OSPF and just basically use

14
00:00:42,969 --> 00:00:44,597
this simple topology here and make

15
00:00:44,597 --> 00:00:48,558
multiple permutations to it,
change it multiple times.

16
00:00:48,558 --> 00:00:50,975
And here's what I'm thinking.

17
00:00:51,888 --> 00:00:54,901
I'm thinking that maybe once I start out,

18
00:00:54,901 --> 00:00:56,960
maybe I just want to start
with a simple topology

19
00:00:56,960 --> 00:00:59,831
of just IP addresses and that's it.

20
00:00:59,831 --> 00:01:03,164
And then later on, add on EIGRP to that,

21
00:01:04,349 --> 00:01:06,873
but at some point in time,
I might want to go back

22
00:01:06,873 --> 00:01:09,779
to that initial topology
where everything was connected

23
00:01:09,779 --> 00:01:11,718
and all it had was IP addresses.

24
00:01:11,718 --> 00:01:13,910
Go back to the time before it had

25
00:01:13,910 --> 00:01:16,411
any routing protocols configured.

26
00:01:16,411 --> 00:01:19,467
And also, maybe after I
initially create EIGRP

27
00:01:19,467 --> 00:01:22,133
and I have that running,
maybe in the future

28
00:01:22,133 --> 00:01:23,742
I want to go back to that.

29
00:01:23,742 --> 00:01:27,009
Maybe in the future, after
I've got OSPF and EIGRP

30
00:01:27,009 --> 00:01:29,840
redistribution working
just fine, I say to myself,

31
00:01:29,840 --> 00:01:31,942
okay, I'd like to go back to them time

32
00:01:31,942 --> 00:01:34,333
when I didn't have OSPF.

33
00:01:34,333 --> 00:01:38,039
When I had all my IP addresses,
when I had EIGRP working,

34
00:01:38,039 --> 00:01:41,000
but before I had all my OSPF.

35
00:01:41,000 --> 00:01:42,140
In other words, I want to have the ability

36
00:01:42,140 --> 00:01:46,562
to go back and forth in time
between different topologies

37
00:01:46,562 --> 00:01:48,756
to be able to play around
with adding things,

38
00:01:48,756 --> 00:01:52,923
changing things, and that is
what Snapshots are used for.

39
00:01:54,069 --> 00:01:56,293
Where, within a project,
you want to be able

40
00:01:56,293 --> 00:01:58,214
to go back and forth in time between

41
00:01:58,214 --> 00:02:02,711
what that project looked like
at various states in time.

42
00:02:02,711 --> 00:02:04,238
Now, one of the things
you might be wondering,

43
00:02:04,238 --> 00:02:06,388
because this was a question
that came up with me was,

44
00:02:06,388 --> 00:02:10,819
well, why don't I just
create multiple projects.

45
00:02:10,819 --> 00:02:13,051
In other words, why
don't I have one project

46
00:02:13,051 --> 00:02:15,240
that is simply this topology

47
00:02:15,240 --> 00:02:18,422
with nothing but the IP addresses in it,

48
00:02:18,422 --> 00:02:21,889
and then why don't I create
another project that has

49
00:02:21,889 --> 00:02:25,899
this topology with the IP
addresses and EIGRP in it,

50
00:02:25,899 --> 00:02:29,752
and then maybe a third
project that has this, EIGRP

51
00:02:29,752 --> 00:02:32,078
and OSPF running, and then if I wanna just

52
00:02:32,078 --> 00:02:33,660
go back and forth, I'll just open up

53
00:02:33,660 --> 00:02:35,999
different project files to do that.

54
00:02:35,999 --> 00:02:38,112
Why would I use the Snapshot tool

55
00:02:38,112 --> 00:02:40,582
instead of just using multiple projects?

56
00:02:40,582 --> 00:02:42,110
Well, here's the reason why.

57
00:02:42,110 --> 00:02:44,314
Basically, at a high
level, it comes down to

58
00:02:44,314 --> 00:02:47,370
memory consumption, that's
what it boils down to.

59
00:02:47,370 --> 00:02:50,287
For example, look here in my folder

60
00:02:51,489 --> 00:02:53,878
where my projects are located.

61
00:02:53,878 --> 00:02:56,584
My users, my name, GNS3 and projects.

62
00:02:56,584 --> 00:02:58,042
And you can see, right now

63
00:02:58,042 --> 00:03:00,368
I've just got four projects in here.

64
00:03:00,368 --> 00:03:02,647
Well, if I click on one, just select it,

65
00:03:02,647 --> 00:03:06,858
and then I right click and hit properties,

66
00:03:06,858 --> 00:03:08,899
notice that one project,

67
00:03:08,899 --> 00:03:11,649
524 megabytes of memory for that.

68
00:03:13,661 --> 00:03:16,005
Okay, what about the next project?

69
00:03:16,005 --> 00:03:18,005
Right click, properties,

70
00:03:19,663 --> 00:03:22,580
once again 532 megabytes of memory.

71
00:03:23,757 --> 00:03:26,940
So this is the downside of using,

72
00:03:26,940 --> 00:03:29,817
or I should say creating multiple projects

73
00:03:29,817 --> 00:03:32,371
if all you wanted to do
was go back and forward

74
00:03:32,371 --> 00:03:33,752
with the same topology,

75
00:03:33,752 --> 00:03:36,074
but adding different
stuff to that topology,

76
00:03:36,074 --> 00:03:37,536
or changing the topology.

77
00:03:37,536 --> 00:03:40,930
It's gonna eat up tons of
memory in your laptop or PC

78
00:03:40,930 --> 00:03:42,833
if the way you're doing that

79
00:03:42,833 --> 00:03:45,091
is by creating multiple projects.

80
00:03:45,091 --> 00:03:47,950
This is where the Snapshot
tool is really beneficial,

81
00:03:47,950 --> 00:03:49,706
'cause everything within the snapshot

82
00:03:49,706 --> 00:03:52,206
stays within this one project.

83
00:03:53,107 --> 00:03:55,085
As an example, just let me go ahead

84
00:03:55,085 --> 00:03:58,040
and close this right here.

85
00:03:58,040 --> 00:04:01,884
So in this particular
topology, I have so far

86
00:04:01,884 --> 00:04:04,004
created two snapshots.

87
00:04:04,004 --> 00:04:07,093
The first snapshot was just IP addressing,

88
00:04:07,093 --> 00:04:08,018
and that was it.

89
00:04:08,018 --> 00:04:10,895
All the links are up, IP
addressing was configured,

90
00:04:10,895 --> 00:04:13,580
nothing else was configured.

91
00:04:13,580 --> 00:04:15,576
So, let's go back to that one.

92
00:04:15,576 --> 00:04:18,128
So, and then I'll show you how to actually

93
00:04:18,128 --> 00:04:19,716
create new snapshots.

94
00:04:19,716 --> 00:04:21,558
So, the first thing I'm gonna show you is,

95
00:04:21,558 --> 00:04:23,914
if you've already got a snapshot running,

96
00:04:23,914 --> 00:04:25,082
how do you go back to it?

97
00:04:25,082 --> 00:04:27,261
In other words, if you've
created a snapshot in the past,

98
00:04:27,261 --> 00:04:29,243
how do you revert back to that snapshot?

99
00:04:29,243 --> 00:04:31,466
So let's say that right now, this topology

100
00:04:31,466 --> 00:04:35,467
actually was running EIGRP,
it actually was running OSPF,

101
00:04:35,467 --> 00:04:37,216
there's all sorts of authentication

102
00:04:37,216 --> 00:04:39,062
and other fun stuff in here, I say, okay,

103
00:04:39,062 --> 00:04:40,194
I'm done with that.

104
00:04:40,194 --> 00:04:42,845
Now I wanna go back to my
real primitive topology

105
00:04:42,845 --> 00:04:46,598
that all it had on it was
IP addressing that's it.

106
00:04:46,598 --> 00:04:49,411
So, step number one, and
this is the critical thing,

107
00:04:49,411 --> 00:04:51,799
when using the Snapshot tool to either

108
00:04:51,799 --> 00:04:55,163
create a new snapshot or to restore back

109
00:04:55,163 --> 00:04:57,587
to what a previous snapshot looked like,

110
00:04:57,587 --> 00:05:00,217
main thing to remember,
all of your devices,

111
00:05:00,217 --> 00:05:03,481
all of your routers and ethernet switches

112
00:05:03,481 --> 00:05:05,720
have to be turned off.

113
00:05:05,720 --> 00:05:07,754
So anything that's running Cisco IOS,

114
00:05:07,754 --> 00:05:09,414
don't worry about the built-in nodes

115
00:05:09,414 --> 00:05:11,753
like Cloud and Host and all that stuff,

116
00:05:11,753 --> 00:05:13,183
but anything that's running IOS,

117
00:05:13,183 --> 00:05:15,327
your etherswitch modules and your routers,

118
00:05:15,327 --> 00:05:17,762
has to be in the off state.

119
00:05:17,762 --> 00:05:19,500
If you try to create a new project

120
00:05:19,500 --> 00:05:21,339
while routers are currently running,

121
00:05:21,339 --> 00:05:23,289
or if you try to revert
back to an old project

122
00:05:23,289 --> 00:05:26,115
while stuff is currently running,

123
00:05:26,115 --> 00:05:28,178
you're gonna have unpredictable results.

124
00:05:28,178 --> 00:05:29,383
A lot of times, what I've seen is that

125
00:05:29,383 --> 00:05:30,908
it just doesn't work.

126
00:05:30,908 --> 00:05:33,491
It takes you right back to
the same place where you were

127
00:05:33,491 --> 00:05:35,344
before you went into Snapshots.

128
00:05:35,344 --> 00:05:38,756
So make sure that all of your
IOS devices are turned off

129
00:05:38,756 --> 00:05:41,832
before using Snapshot in
any way, shape or form.

130
00:05:41,832 --> 00:05:44,683
So, now I want to revert
back to an old snapshot,

131
00:05:44,683 --> 00:05:47,683
so, number one, stop all my devices.

132
00:05:48,982 --> 00:05:50,686
Now that they're all stopped,

133
00:05:50,686 --> 00:05:53,434
go up to this tool right here.

134
00:05:53,434 --> 00:05:56,812
This is the, as you can
see, Manage Snapshots tool.

135
00:05:56,812 --> 00:05:59,895
And you're gonna wanna click on that.

136
00:06:00,967 --> 00:06:02,712
And you can see, in
this particular project,

137
00:06:02,712 --> 00:06:04,690
I've already created two snapshots,

138
00:06:04,690 --> 00:06:07,065
so I'm gonna click on
the one, and you can see,

139
00:06:07,065 --> 00:06:08,060
when you create a snapshot you,

140
00:06:08,060 --> 00:06:10,500
you're gonna wanna give it
some sort of descriptive name

141
00:06:10,500 --> 00:06:13,355
so you can remember what
your topology was like,

142
00:06:13,355 --> 00:06:16,545
what it was doing at that point in time.

143
00:06:16,545 --> 00:06:18,215
So I'm gonna click on IP addressing only

144
00:06:18,215 --> 00:06:21,305
and I'm gonna click on restore.

145
00:06:21,305 --> 00:06:24,209
And it warns you, it says
okay, if you do this,

146
00:06:24,209 --> 00:06:26,079
anything that's currently
in your running config

147
00:06:26,079 --> 00:06:28,067
that hasn't been saved is gonna be gone,

148
00:06:28,067 --> 00:06:29,750
it's gonna be wiped out.

149
00:06:29,750 --> 00:06:32,030
I say yeah, okay, well that's
actually what I wanna do,

150
00:06:32,030 --> 00:06:33,505
I wanna wipe out the current state

151
00:06:33,505 --> 00:06:37,394
and revert back to the previous state.

152
00:06:37,394 --> 00:06:41,405
Okay, so here I am, now actually, if my,

153
00:06:41,405 --> 00:06:43,059
probably what I should have done

154
00:06:43,059 --> 00:06:44,413
is when I first started this,

155
00:06:44,413 --> 00:06:47,548
I probably shouldn't have
labeled in like EIGRP and OSPF,

156
00:06:47,548 --> 00:06:50,700
I probably, when I created the snapshot,

157
00:06:50,700 --> 00:06:52,675
it probably would have made more sense

158
00:06:52,675 --> 00:06:55,578
just to have the actual
picture look like the routers,

159
00:06:55,578 --> 00:06:57,327
the links, and the IP addresses,

160
00:06:57,327 --> 00:06:58,985
'cause right now, looking at this,

161
00:06:58,985 --> 00:07:00,383
I know it kinda looks confusing, like,

162
00:07:00,383 --> 00:07:03,372
well, wait a second, is he
still running EIGRP and OSPF?

163
00:07:03,372 --> 00:07:05,613
No, I'm not, and here's
how I can show you.

164
00:07:05,613 --> 00:07:08,945
I'll go ahead and start everything up.

165
00:07:08,945 --> 00:07:10,279
Alright, now it's running.

166
00:07:10,279 --> 00:07:13,349
Now, I'm just gonna get
into one of my devices.

167
00:07:13,349 --> 00:07:14,432
Let's say R2.

168
00:07:19,412 --> 00:07:20,982
And the way I know that the snapshot

169
00:07:20,982 --> 00:07:24,187
worked the way that I reverted back,

170
00:07:24,187 --> 00:07:27,138
is that when this device comes up,

171
00:07:27,138 --> 00:07:29,653
if I do show ip interface brief,

172
00:07:29,653 --> 00:07:34,148
actually, let me go ahead
and just make the font size

173
00:07:34,148 --> 00:07:36,241
a little bit larger for you guys,

174
00:07:36,241 --> 00:07:40,408
so you can read it a little
bit easier on the video.

175
00:07:41,686 --> 00:07:42,686
There we go.

176
00:07:50,625 --> 00:07:52,542
show ip interface brief.

177
00:07:54,245 --> 00:07:57,494
So you can see, right now,
my IP addresses are there,

178
00:07:57,494 --> 00:08:00,001
it remembered that at the
time I took this snapshot

179
00:08:00,001 --> 00:08:02,969
those interfaces were
actually up up and connected,

180
00:08:02,969 --> 00:08:06,856
and if I do show ip protocols,
you can see there's nothing.

181
00:08:06,856 --> 00:08:09,035
So right now, this is before I configured

182
00:08:09,035 --> 00:08:11,123
any routing protocol at all.

183
00:08:11,123 --> 00:08:13,890
All I had were IP addresses.

184
00:08:13,890 --> 00:08:17,510
Now let's go ahead and close this window.

185
00:08:17,510 --> 00:08:19,736
And now I say, okay, well
what I'd like to do now

186
00:08:19,736 --> 00:08:21,656
is move forward in time.

187
00:08:21,656 --> 00:08:24,921
I wanna go forward in time to
when I created the snapshot

188
00:08:24,921 --> 00:08:28,577
when my EIGRP was up and functional.

189
00:08:28,577 --> 00:08:29,994
Okay, click stop.

190
00:08:31,159 --> 00:08:32,444
Stop everything.

191
00:08:32,444 --> 00:08:35,269
Go to the Snapshot button again.

192
00:08:35,269 --> 00:08:38,052
Select the snapshot that
you previously created,

193
00:08:38,052 --> 00:08:39,052
and restore.

194
00:08:40,470 --> 00:08:43,137
Once again, you get the warning.

195
00:08:48,222 --> 00:08:49,805
Alright, everything should be back,

196
00:08:49,805 --> 00:08:53,055
so now let's start everything up again.

197
00:08:54,202 --> 00:08:55,553
So, how do I know that worked?

198
00:08:55,553 --> 00:08:57,258
How do I know that it restored me

199
00:08:57,258 --> 00:08:59,500
back to that point in time when,

200
00:08:59,500 --> 00:09:01,432
not only the IP addresses were here,

201
00:09:01,432 --> 00:09:03,118
but I had also configured EIGRP.

202
00:09:03,118 --> 00:09:03,951
Well, once again, let's just

203
00:09:03,951 --> 00:09:06,784
double-click on a router, R2 here.

204
00:09:18,620 --> 00:09:20,193
Show ip interface brief,

205
00:09:20,193 --> 00:09:22,561
verify that my IP addresses
are still there, yep.

206
00:09:22,561 --> 00:09:25,560
And now show ip protocols,

207
00:09:25,560 --> 00:09:28,128
and you can see, I've got EIGRP running.

208
00:09:28,128 --> 00:09:30,045
Show ip eigrp neighbor,

209
00:09:31,005 --> 00:09:32,749
I have an EIGRP neighbor.

210
00:09:32,749 --> 00:09:36,242
So it now brought me
to that point in time.

211
00:09:36,242 --> 00:09:37,858
So now let's take it one step further.

212
00:09:37,858 --> 00:09:41,536
Let me show you how to
create a brand new snapshot.

213
00:09:41,536 --> 00:09:43,037
So in order to do this,

214
00:09:43,037 --> 00:09:45,453
I'm gonna take up, with
my existing topology,

215
00:09:45,453 --> 00:09:48,856
and now I'm gonna configure
just a basic OSPF adjacency

216
00:09:48,856 --> 00:09:50,356
between R2 and R3.

217
00:09:51,630 --> 00:09:54,375
So let's bring up R3 here.

218
00:09:54,375 --> 00:09:57,042
Alright, so let's start with R2,

219
00:09:59,368 --> 00:10:00,451
router ospf 1

220
00:10:01,634 --> 00:10:03,271
network, and in this particular case,

221
00:10:03,271 --> 00:10:05,938
it's gonna be the 2.3.2 network.

222
00:10:09,208 --> 00:10:12,152
And that's gonna be in area zero.

223
00:10:12,152 --> 00:10:12,985
And that's all I'm gonna do,

224
00:10:12,985 --> 00:10:14,466
I'm not gonna do any
redistribution right now,

225
00:10:14,466 --> 00:10:17,226
I'm just gonna get my
EIGRP up and working.

226
00:10:17,226 --> 00:10:18,691
Now, notice once thing I did,

227
00:10:18,691 --> 00:10:20,897
which is just very, very important.

228
00:10:20,897 --> 00:10:22,684
I'll zoom in on this.

229
00:10:22,684 --> 00:10:24,684
In this particular case,

230
00:10:26,265 --> 00:10:29,313
I issued the write memory command.

231
00:10:29,313 --> 00:10:31,367
It's kind of abbreviated here,
but I could also have issued

232
00:10:31,367 --> 00:10:33,470
the copy run start command.

233
00:10:33,470 --> 00:10:35,899
Why is that important?

234
00:10:35,899 --> 00:10:39,255
Because when you take the
snapshot, when you create it,

235
00:10:39,255 --> 00:10:42,494
at that moment in time,
it takes a snapshot

236
00:10:42,494 --> 00:10:45,270
of the current saved configuration,

237
00:10:45,270 --> 00:10:47,550
the startup configuration of your devices.

238
00:10:47,550 --> 00:10:52,033
It does not take a snapshot
of your running configuration.

239
00:10:52,033 --> 00:10:53,654
So if you have a running configuration

240
00:10:53,654 --> 00:10:55,347
with any unsaved changes,

241
00:10:55,347 --> 00:10:58,989
they will not be a part of your snapshot.

242
00:10:58,989 --> 00:11:01,307
So make sure you save all your configs

243
00:11:01,307 --> 00:11:05,681
with copy run start or write
memory, whichever you prefer,

244
00:11:05,681 --> 00:11:08,069
then make sure you shut
down all your routers,

245
00:11:08,069 --> 00:11:11,652
power them off, and
then take the snapshot.

246
00:11:17,760 --> 00:11:18,760
Alright, so.

247
00:11:21,401 --> 00:11:23,189
So I saved my configuration here,

248
00:11:23,189 --> 00:11:25,599
so now let's go into,
I'm done with Router 2,

249
00:11:25,599 --> 00:11:28,275
let's go into the other router.

250
00:11:28,275 --> 00:11:29,417
And actually, before I do this,

251
00:11:29,417 --> 00:11:33,598
I will just copy that part
of my OSPF configuration

252
00:11:33,598 --> 00:11:36,265
so I can just copy and paste it.

253
00:11:38,349 --> 00:11:40,602
Make life easy for myself.

254
00:11:40,602 --> 00:11:44,352
Alright, now let's get
into the other router.

255
00:11:46,568 --> 00:11:48,571
Paste all that stuff in.

256
00:11:48,571 --> 00:11:51,655
Ah, it didn't work, okay, so

257
00:11:51,655 --> 00:11:53,655
let's go back over here.

258
00:11:57,274 --> 00:11:58,274
There we go.

259
00:12:01,469 --> 00:12:04,403
So we should see now, OSPF
takes a little bit longer than

260
00:12:04,403 --> 00:12:07,218
EIGRP to do its stuff, but, there we go.

261
00:12:07,218 --> 00:12:10,088
Now the OSPF adjacency is up.

262
00:12:10,088 --> 00:12:11,838
Show ip ospf neighbor

263
00:12:13,563 --> 00:12:14,733
Great, now I have to remember

264
00:12:14,733 --> 00:12:18,503
to save the configuration in this guy.

265
00:12:18,503 --> 00:12:20,907
Alright, so now I've
saved the configuration

266
00:12:20,907 --> 00:12:22,507
in both routers,

267
00:12:22,507 --> 00:12:26,090
I will shut this terminal
application down.

268
00:12:27,030 --> 00:12:29,874
I will turn off my routers.

269
00:12:29,874 --> 00:12:34,030
And now, once again, I'll
go to the Snapshot tool,

270
00:12:34,030 --> 00:12:37,522
and this time I'll select Create.

271
00:12:37,522 --> 00:12:39,724
And I'll give it a name.

272
00:12:39,724 --> 00:12:40,641
OSPF-EIGRP-

273
00:12:44,012 --> 00:12:45,262
No-Redistribute

274
00:12:46,803 --> 00:12:48,917
That's just my name.

275
00:12:48,917 --> 00:12:51,250
It saves it, and I close it.

276
00:12:53,383 --> 00:12:55,683
Now, where does it actually
save these snapshots,

277
00:12:55,683 --> 00:12:58,758
you might be wondering, are
these snapshots gonna be good

278
00:12:58,758 --> 00:13:01,799
even after I close this project
and completely walk away,

279
00:13:01,799 --> 00:13:03,421
what if I close my laptop?

280
00:13:03,421 --> 00:13:05,386
Are the snapshots still in there?

281
00:13:05,386 --> 00:13:07,003
Yes, they are, and here's how we can see.

282
00:13:07,003 --> 00:13:11,170
So everything's closed, let's
go ahead and quit from GNS3,

283
00:13:14,144 --> 00:13:18,311
and now I'll go into my file
where all of my GNS3 stuff is.

284
00:13:21,136 --> 00:13:23,053
Here's Projects.

285
00:13:23,053 --> 00:13:25,425
So, I'll select that Snapshot Test,

286
00:13:25,425 --> 00:13:29,640
that's the one I was doing,
and under Project Files,

287
00:13:29,640 --> 00:13:34,005
you can see right there, it has
a category called snapshots.

288
00:13:34,005 --> 00:13:35,756
And if I double-click on that,

289
00:13:35,756 --> 00:13:39,339
there are all the
snapshots that I created.

290
00:13:40,908 --> 00:13:43,242
So now let's go ahead and,

291
00:13:43,242 --> 00:13:45,081
and notice, if I go back
to the Project file,

292
00:13:45,081 --> 00:13:47,374
that's all contained
within that one project,

293
00:13:47,374 --> 00:13:51,541
so that one project now, that
has multiple snapshots in time

294
00:13:53,119 --> 00:13:54,618
it exceeded the size a little bit,

295
00:13:54,618 --> 00:13:56,437
you know, the other projects were like

296
00:13:56,437 --> 00:13:59,498
500 and something megs, now
in this particular case,

297
00:13:59,498 --> 00:14:02,599
we're up to 799 megabits, but still,

298
00:14:02,599 --> 00:14:05,512
that's a lot less memory
than if I had created

299
00:14:05,512 --> 00:14:08,438
three or four separate projects,

300
00:14:08,438 --> 00:14:12,022
rather than three or four snapshots.

301
00:14:12,022 --> 00:14:12,855
So, okay.

302
00:14:13,760 --> 00:14:17,927
So now let's go back to
GNS3 and start it up again.

303
00:14:20,213 --> 00:14:22,296
I will open that project.

304
00:14:28,732 --> 00:14:31,015
Now, by default, when
you open the project,

305
00:14:31,015 --> 00:14:35,182
GNS3 will open it to the most
recent snapshot that you took.

306
00:14:36,293 --> 00:14:38,194
So right now, it should have opened it

307
00:14:38,194 --> 00:14:42,399
to my EIGRP OSPF snapshot,
'cause that was the very last

308
00:14:42,399 --> 00:14:45,185
one that I took before
I shut everything down.

309
00:14:45,185 --> 00:14:47,376
Let's confirm that.

310
00:14:47,376 --> 00:14:50,450
So, I'lljust open up R2 and, if I'm right,

311
00:14:50,450 --> 00:14:53,783
R2 should now be running EIGRP and OSPF.

312
00:15:05,374 --> 00:15:07,624
And here's how we can tell.

313
00:15:09,063 --> 00:15:10,896
Show ip eigrp neighbor

314
00:15:12,063 --> 00:15:14,032
Yep, I have an EIGRP neighbor.

315
00:15:14,032 --> 00:15:16,533
Show ip ospf neighbor

316
00:15:16,533 --> 00:15:19,548
And there's my OSPF neighbor.

317
00:15:19,548 --> 00:15:21,902
I say, okay, well, I
wanna go back in time when

318
00:15:21,902 --> 00:15:23,642
all I had were IP addresses.

319
00:15:23,642 --> 00:15:25,835
Maybe I wanna get rid of EIGRP and OSPF

320
00:15:25,835 --> 00:15:29,072
and I wanna configure RIP and BGP.

321
00:15:29,072 --> 00:15:33,092
Okay, well, rather than
unconfiguring everything,

322
00:15:33,092 --> 00:15:36,125
I will just stop all my routers,

323
00:15:36,125 --> 00:15:38,611
go to my Snapshot tool,

324
00:15:38,611 --> 00:15:41,028
go to my very first snapshot,

325
00:15:41,869 --> 00:15:42,702
restore,

326
00:15:47,543 --> 00:15:51,211
alright, now start 'em all up again.

327
00:15:51,211 --> 00:15:54,628
And now when I go into R2, we should see,

328
00:15:55,607 --> 00:15:59,357
let me make this a little
bit larger for you,

329
00:16:06,358 --> 00:16:08,134
so now, because I went
to my first snapshot,

330
00:16:08,134 --> 00:16:11,699
if I do show ip protocol, I have nothing.

331
00:16:11,699 --> 00:16:14,117
But if I do show ip interface brief,

332
00:16:14,117 --> 00:16:16,534
I still have my IP addresses.

333
00:16:18,075 --> 00:16:21,902
And that is how you use the Snapshot tool.

334
00:16:21,902 --> 00:16:24,319
(iNE jingle)

