WEBVTT

0:00:08.000000 --> 0:00:12.580000
 In this video I'd like to show you
 how to change the terminal emulator

0:00:12.580000 --> 0:00:19.360000
 that GNS3 uses. As of this recording
 anyway, the end of February in 2016,

0:00:19.360000 --> 0:00:24.460000
 GNS3 defaults using Putty
 as a terminal emulator.

0:00:24.460000 --> 0:00:26.340000
 Say that five times fast.

0:00:26.340000 --> 0:00:30.280000
 And the problem with Putty, at least
 as of right now, is that if you have

0:00:30.280000 --> 0:00:34.780000
 any more than one router in your topology,
 every time you open a terminal

0:00:34.780000 --> 0:00:38.820000
 to the router it opens a new
 window within your screen.

0:00:38.820000 --> 0:00:43.860000
 For example, so right now I am default
 to Putty and if I double click

0:00:43.860000 --> 0:00:46.620000
 a router, there it is.

0:00:46.620000 --> 0:00:47.980000
 A Putty window is just opened.

0:00:47.980000 --> 0:00:52.480000
 If I double click another router, a
 new Putty window was just opened.

0:00:52.480000 --> 0:00:56.600000
 And so you can see that after a while
 after having five or six or seven

0:00:56.600000 --> 0:01:00.560000
 of these, depending on how large your
 topology is, it can get kind of

0:01:00.560000 --> 0:01:04.720000
 unwieldy going back and forth between
 these different windows, making

0:01:04.720000 --> 0:01:07.800000
 sure they are arranged properly
 on your screen.

0:01:07.800000 --> 0:01:12.360000
 And so if you are like me, you'd probably
 prefer to use a different terminal

0:01:12.360000 --> 0:01:16.220000
 emulation program that actually
 has the tab capability.

0:01:16.220000 --> 0:01:19.240000
 In other words, it means that when
 that terminal emulation application

0:01:19.240000 --> 0:01:24.440000
 opens up, every new instance that you
 click on for router will open within

0:01:24.440000 --> 0:01:28.040000
 one window. And there will be tab, there
 will be like right next to each

0:01:28.040000 --> 0:01:32.100000
 other, or horizontal or vertical, rather
 than having separate windows

0:01:32.100000 --> 0:01:35.000000
 all over your desktop.

0:01:35.000000 --> 0:01:40.140000
 So the question is, how do you change
 to using secure CRT or whatever

0:01:40.140000 --> 0:01:44.620000
 other terminal emulator that you wish
 that supports that capability?

0:01:44.620000 --> 0:01:48.340000
 Or maybe you want other capabilities
 that just aren't built into Putty.

0:01:48.340000 --> 0:01:50.740000
 Okay, it was actually
 pretty simple.

0:01:50.740000 --> 0:01:53.280000
 Go ahead and close this.

0:01:53.280000 --> 0:01:57.100000
 So what you're going to want to do is
 up here, in the upper left, you're

0:01:57.100000 --> 0:02:02.400000
 going to want to click over, it
 says Edit, and then Preferences.

0:02:02.400000 --> 0:02:06.680000
 And then here under General Preferences,
 you'll want to click on the tab

0:02:06.680000 --> 0:02:09.740000
 that says Console Applications.

0:02:09.740000 --> 0:02:14.060000
 Now you can see by default, it uses
 Putty, but I don't want that.

0:02:14.060000 --> 0:02:17.040000
 In my case, I want
 to use Secure CRT.

0:02:17.040000 --> 0:02:20.240000
 So I'll click this first
 Edit button right here.

0:02:20.240000 --> 0:02:26.860000
 And from the drop-down window, I will
 select in my particular case Secure

0:02:26.860000 --> 0:02:31.080000
 CRT. Now you can see there's lots
 of other ones in here as well.

0:02:31.080000 --> 0:02:35.680000
 And if the particular application you're
 looking for isn't in here, then

0:02:35.680000 --> 0:02:37.560000
 you could select Custom.

0:02:37.560000 --> 0:02:40.560000
 But I'm just going
 to do Secure CRT.

0:02:40.560000 --> 0:02:45.820000
 And now in my particular case, because
 I've already used GNS3 lots of

0:02:45.820000 --> 0:02:50.980000
 times before I did this video, it knew
 exactly where Secure CRT was located

0:02:50.980000 --> 0:02:53.900000
 and also put in all these
 arguments here.

0:02:53.900000 --> 0:02:57.700000
 So I want to talk a little bit more
 about what if you don't get that?

0:02:57.700000 --> 0:03:02.820000
 What if you choose Secure CRT and it
 doesn't know the path or the path

0:03:02.820000 --> 0:03:04.600000
 that came up with is wrong?

0:03:04.600000 --> 0:03:08.720000
 Or the path is right, but it doesn't
 have any of these arguments.

0:03:08.720000 --> 0:03:10.720000
 Okay, so let's take
 step number one.

0:03:10.720000 --> 0:03:16.500000
 Let's just assume that it's Secure
 CRT and the GNS3 was unable to, by

0:03:16.500000 --> 0:03:21.360000
 default, locate the path of
 where Secure CRT is located.

0:03:21.360000 --> 0:03:25.420000
 So in other words, when you did
 it, it came up like this.

0:03:25.420000 --> 0:03:28.480000
 Just empty. Or maybe you're just
 doing Custom, either way.

0:03:28.480000 --> 0:03:31.140000
 Okay, so I'm going to
 cancel out of this.

0:03:31.140000 --> 0:03:39.620000
 Minimize GNS3. And I'm going to open
 up Secure CRT just by itself from

0:03:39.620000 --> 0:03:42.960000
 my Start and Programs window.

0:03:42.960000 --> 0:03:45.540000
 Okay, so it's running right now.

0:03:45.540000 --> 0:03:49.540000
 So the next thing I'm going to do is
 on my laptop, I'm going to go into

0:03:49.540000 --> 0:03:51.140000
 the Task Manager.

0:03:51.140000 --> 0:03:55.660000
 And I'll bring it over here
 so that you can see it.

0:03:55.660000 --> 0:04:03.460000
 All right, and from the Task Manager,
 I'm going to select on View.

0:04:03.460000 --> 0:04:07.960000
 And I'm going to select Columns.

0:04:07.960000 --> 0:04:10.540000
 And within all these things here, now
 this is showing you, when you open

0:04:10.540000 --> 0:04:15.320000
 up the Task Manager, what information
 about each project or each process

0:04:15.320000 --> 0:04:17.240000
 is it showing you?

0:04:17.240000 --> 0:04:21.180000
 Well, I actually want to see
 the path to every process.

0:04:21.180000 --> 0:04:23.440000
 So I will go down here.

0:04:23.440000 --> 0:04:26.260000
 And actually, this is already
 selected for me.

0:04:26.260000 --> 0:04:27.640000
 For you, it might not be.

0:04:27.640000 --> 0:04:31.740000
 But you'll want to make sure that
 you select Image Path Name.

0:04:31.740000 --> 0:04:37.360000
 And then okay. So once again,
 that was under Options.

0:04:37.360000 --> 0:04:40.660000
 Now that was under View
 Select Columns.

0:04:40.660000 --> 0:04:42.320000
 View Select Columns.

0:04:42.320000 --> 0:04:45.080000
 And then make sure you
 select Image Path Name.

0:04:45.080000 --> 0:04:49.040000
 And so now, within here, not only will
 you see all the stuff that's running,

0:04:49.040000 --> 0:04:52.100000
 but you'll also see, like
 it says, the Image Path.

0:04:52.100000 --> 0:04:58.440000
 So let me go ahead and find, let's sort
 this by name, so it's alphabetical.

0:04:58.440000 --> 0:05:01.620000
 Scroll down, I have Secure
 CRT running right now.

0:05:01.620000 --> 0:05:05.080000
 And right here, we can
 see the Image Path.

0:05:05.080000 --> 0:05:07.740000
 So you're going to want to write that
 down somewhere, or you're going

0:05:07.740000 --> 0:05:09.680000
 to want to take a screenshot
 of that.

0:05:09.680000 --> 0:05:14.300000
 But basically, you're going to want
 to know what that Image Path is.

0:05:14.300000 --> 0:05:18.580000
 And so once you find the Image
 Path, you can close Secure CRT.

0:05:18.580000 --> 0:05:20.020000
 You don't need it anymore.

0:05:20.020000 --> 0:05:31.960000
 Go back to GNS3, Edit, Preferences,
 Console Application, Edit, Secure

0:05:31.960000 --> 0:05:38.220000
 CRT. And if yours came up empty, like
 this, you're going to want to go

0:05:38.220000 --> 0:05:40.000000
 ahead and plug in the path.

0:05:40.000000 --> 0:05:43.500000
 You're going to want to start it with
 a quotation mark, and then end the

0:05:43.500000 --> 0:05:46.340000
 path with a quotation mark.

0:05:46.340000 --> 0:05:49.200000
 So just copy and paste
 it in there.

0:05:49.200000 --> 0:05:54.420000
 Now before I leave it, if I just hit
 OK at this point, it still wouldn't

0:05:54.420000 --> 0:05:58.680000
 work. It actually would open up the
 Secure CRT application, but it would

0:05:58.680000 --> 0:06:01.880000
 not open up a window to the
 router I had clicked on.

0:06:01.880000 --> 0:06:06.940000
 And that's why we need these additional
 arguments right here, slash N

0:06:06.940000 --> 0:06:08.660000
 all the way to percent P.

0:06:08.660000 --> 0:06:11.900000
 Now if you're like me, you wonder what
 does all this stuff do, so I did

0:06:11.900000 --> 0:06:13.880000
 a little bit of research,
 and here you can see.

0:06:13.880000 --> 0:06:16.960000
 Go ahead and right now if you want,
 go ahead and pause the video, and

0:06:16.960000 --> 0:06:19.400000
 read through each one of these things,
 and they'll give you a better idea

0:06:19.400000 --> 0:06:21.980000
 of what all these different
 arguments do.

0:06:21.980000 --> 0:06:25.760000
 But you want to make sure you have
 those arguments in there after the

0:06:25.760000 --> 0:06:32.320000
 path name. So I'm just
 going to copy those.

0:06:32.320000 --> 0:06:38.940000
 Go back here, do a space,
 paste them in.

0:06:38.940000 --> 0:06:42.620000
 OK, then hit Apply.

0:06:42.620000 --> 0:06:45.080000
 Make sure that everything
 looks good up here.

0:06:45.080000 --> 0:06:45.860000
 Yeah, it looks good.

0:06:45.860000 --> 0:06:47.300000
 It's got everything I typed in.

0:06:47.300000 --> 0:06:57.080000
 Apply OK. And now when I hit R1,
 it opens it up within Secure CRT.

0:06:57.080000 --> 0:07:01.600000
 And now when I go back and I hit R2,
 it opens a second window, a second

0:07:01.600000 --> 0:07:07.020000
 tab within Secure CRT, because I use
 the slash T option, which told Secure

0:07:07.020000 --> 0:07:10.920000
 CRT to open this up within tabs.

0:07:10.920000 --> 0:07:16.040000
 And so now this can be a lot more useful
 when working with multiple routers

0:07:16.040000 --> 0:07:19.480000
 at the same time.

