WEBVTT

0:00:08.260000 --> 0:00:12.960000
 So in the next several videos, I'm going
 to be bringing much of what we

0:00:12.960000 --> 0:00:15.860000
 learned into focus by
 building some labs.

0:00:15.860000 --> 0:00:18.500000
 And these are labs that you can follow
 along with and you can try to build

0:00:18.500000 --> 0:00:19.700000
 yourself as well.

0:00:19.700000 --> 0:00:22.840000
 So these are going to
 be CCNA level labs.

0:00:22.840000 --> 0:00:25.160000
 So I'm going to try to keep it constrained
 to just stuff that you would

0:00:25.160000 --> 0:00:28.400000
 need to know for the CCNA routing
 and switching exam.

0:00:28.400000 --> 0:00:35.180000
 So to begin with, we're going to start
 by building a CCNA-EI-GRP level

0:00:35.180000 --> 0:00:40.820000
 lab. Now if you're building your own
 labs, before you get onto GNS3 or

0:00:40.820000 --> 0:00:44.120000
 anything else, you should always
 do the same set of steps.

0:00:44.120000 --> 0:00:47.580000
 The very first step you should do is
 write down on a piece of paper or

0:00:47.580000 --> 0:00:52.040000
 open up notepad or something and write
 out what the objectives are that

0:00:52.040000 --> 0:00:53.500000
 you want for your lab.

0:00:53.500000 --> 0:00:54.400000
 What do you want to learn?

0:00:54.400000 --> 0:00:55.400000
 What do you want to practice?

0:00:55.400000 --> 0:00:58.820000
 That way you don't end up going off
 into Never Never Land and never get

0:00:58.820000 --> 0:01:02.060000
 around to what you actually meant when
 you started the lab in the first

0:01:02.060000 --> 0:01:05.920000
 place. So that being said, I've created
 some initial objectives here for

0:01:05.920000 --> 0:01:10.360000
 this lab. We're going to
 start with four routers.

0:01:10.360000 --> 0:01:12.540000
 We're going to create
 some redundant paths.

0:01:12.540000 --> 0:01:15.820000
 So we're going to create some paths
 that are really fast and some paths

0:01:15.820000 --> 0:01:20.340000
 that are really slow because part of
 the CCNA routing and switching is

0:01:20.340000 --> 0:01:25.820000
 they expect you to know how EI-EI-GRP
 selects its best path and what you

0:01:25.820000 --> 0:01:29.660000
 could do to force it to choose
 an alternative path.

0:01:29.660000 --> 0:01:32.400000
 That's one of the things we're
 going to be doing here as well.

0:01:32.400000 --> 0:01:36.140000
 To that end, we're going to be using
 serial and Ethernet links in our

0:01:36.140000 --> 0:01:41.140000
 topology. So we're going to configure
 EI-EI-GRP such that all the routers

0:01:41.140000 --> 0:01:44.020000
 are in the exact same
 autonomous system.

0:01:44.020000 --> 0:01:47.360000
 Two of those routers are going to form
 a neighbor relationship using EI

0:01:47.360000 --> 0:01:50.520000
-EI-GRP authentication because you need
 to know how to configure that and

0:01:50.520000 --> 0:01:52.960000
 troubleshoot that for the CCNA.

0:01:52.960000 --> 0:01:56.520000
 The end routers, the routers at either
 end of the topology should use

0:01:56.520000 --> 0:01:59.280000
 the slow speed link by the
 time we're all done.

0:01:59.280000 --> 0:02:02.180000
 So if they're pinging each other, they
 should go across the slow speed

0:02:02.180000 --> 0:02:06.180000
 link. So you're going to have to manipulate
 EI-EI-GRP to accomplish that.

0:02:06.180000 --> 0:02:09.460000
 And we're also going to use the built
-in wire shark feature of GNS3 to

0:02:09.460000 --> 0:02:13.060000
 actually capture some of the packets so we
 can see what the neighbor relationship

0:02:13.060000 --> 0:02:18.860000
 looks like when it's being built and how
 EI-EI-GRP routers exchange routes.

0:02:18.860000 --> 0:02:22.760000
 So that being the case, that is
 the objectives for this lab.

0:02:22.760000 --> 0:02:25.520000
 And I have worked up here, this is the
 topology that we're going to end

0:02:25.520000 --> 0:02:28.540000
 up building. I'll make this
 a little bit larger.

0:02:28.540000 --> 0:02:30.140000
 So this is what I'm
 going to create.

0:02:30.140000 --> 0:02:31.920000
 And I've put in the
 IP addresses here.

0:02:31.920000 --> 0:02:35.520000
 I've put in a couple of loopbacks
 so that we can ping each other.

0:02:35.520000 --> 0:02:37.980000
 And this is what we
 are going to build.

0:02:37.980000 --> 0:02:42.180000
 So at this point, if you want to try
 to recreate this yourself, I'm going

0:02:42.180000 --> 0:02:44.880000
 to bring this video to
 a close right now.

0:02:44.880000 --> 0:02:48.700000
 Before you start up the next video,
 go ahead, try to build this, if you

0:02:48.700000 --> 0:02:54.020000
 can, and get it working so that when,
 for example, pings initiate from

0:02:54.020000 --> 0:02:58.360000
 router one, and they're pinging the
 loopback of router four, they should

0:02:58.360000 --> 0:03:03.260000
 take the slow speed serial link,
 both there and back on the reply.

0:03:03.260000 --> 0:03:06.580000
 So at this point, I'm going to go
 ahead and close off this video.

0:03:06.580000 --> 0:03:10.040000
 And in the next four or five videos,
 I'm going to go through the process

0:03:10.040000 --> 0:03:13.040000
 of actually building this
 and making it work.

0:03:13.040000 --> 0:03:16.320000
 So if you get stuck anywhere along the
 way, you can go to some of those

0:03:16.320000 --> 0:03:19.040000
 other videos and see how I did it.


