WEBVTT

0:00:08.740000 --> 0:00:12.240000
 So let's start with part one of building
 and troubleshooting this lab

0:00:12.240000 --> 0:00:13.140000
 and get it going.

0:00:13.140000 --> 0:00:17.420000
 So in this first section, we're just
 going to open up GNS3, we're going

0:00:17.420000 --> 0:00:20.700000
 to start our project and we're going to
 start building the physical topology

0:00:20.700000 --> 0:00:22.860000
 and adding all the links
 and all that good stuff.

0:00:22.860000 --> 0:00:25.920000
 So let's get going with that.

0:00:25.920000 --> 0:00:29.780000
 So step number one is to actually
 open the application.

0:00:29.780000 --> 0:00:38.100000
 All right, and let's go ahead
 and name this CCNA, EIGRP lab.

0:00:38.100000 --> 0:00:39.400000
 You can call it whatever you want.


0:00:39.400000 --> 0:00:41.160000
 That's just what I'm
 going to call it.

0:00:41.160000 --> 0:00:44.020000
 Okay, and once again, this is the topology
 that we're going to build.

0:00:44.020000 --> 0:00:48.040000
 So if you haven't done this already
 and you're just following along with

0:00:48.040000 --> 0:00:52.860000
 me, I would recommend that you take
 a screenshot of this image so that

0:00:52.860000 --> 0:00:55.620000
 you can reference it because I'm going
 to pull this over to my other monitor

0:00:55.620000 --> 0:01:00.220000
 so I can reference this
 as we build it.

0:01:00.220000 --> 0:01:03.120000
 Okay, so really this just
 involves four routers.

0:01:03.120000 --> 0:01:04.360000
 So I'm going to go over here.

0:01:04.360000 --> 0:01:07.160000
 I'm going to drag the router, but before
 I drop it, before I let go of

0:01:07.160000 --> 0:01:10.560000
 my mouse, I'm going to hit the shift
 key and then let go of my mouse,

0:01:10.560000 --> 0:01:13.540000
 which as I mentioned in previous videos
 allows us to select more than

0:01:13.540000 --> 0:01:15.840000
 one router at a time.

0:01:15.840000 --> 0:01:19.480000
 So let's go ahead and put
 these into my topology.

0:01:19.480000 --> 0:01:28.520000
 All right, and then we want to
 create the physical links.

0:01:28.520000 --> 0:01:33.680000
 So on the bottom, we're going to be using
 FastEthernet all the way across.

0:01:33.680000 --> 0:01:39.860000
 I'm just using the link
 tool to do that.

0:01:39.860000 --> 0:01:45.640000
 And then on the top, we're going to be
 using serial interfaces to go across.

0:01:45.640000 --> 0:01:53.760000
 All right, now we can
 unselect that tool.

0:01:53.760000 --> 0:01:58.900000
 And before we are done, we need to,
 it's probably a good idea to click

0:01:58.900000 --> 0:02:03.120000
 on the show, hide interfaces button
 right here so that we can actually

0:02:03.120000 --> 0:02:06.040000
 see the interfaces
 on our topology.

0:02:06.040000 --> 0:02:10.500000
 So we don't get confused about
 what is connected to what.

0:02:10.500000 --> 0:02:13.860000
 And just move those around a little
 bit so they're a little bit clearer

0:02:13.860000 --> 0:02:18.880000
 to see. Okay, that pretty much concludes
 it for this particular video.

0:02:18.880000 --> 0:02:22.240000
 That is all that was necessary
 to build the physical topology.

0:02:22.240000 --> 0:02:25.840000
 So before we leave here, we're going
 to want to save our project.

0:02:25.840000 --> 0:02:35.760000
 So just file and then
 save project.

