WEBVTT

0:00:07.820000 --> 0:00:12.540000
 So at this point we have EIGRP up and
 functional, we have end-to-end IP

0:00:12.540000 --> 0:00:16.840000
 connectivity. But the lab also said
 that between two routers we had to

0:00:16.840000 --> 0:00:19.040000
 include EIGRP authentication.

0:00:19.040000 --> 0:00:22.380000
 So in this particular video, that's where
 we're going to add in that particular

0:00:22.380000 --> 0:00:28.120000
 element. So remember as far as the lab
 was concerned, EIGRP authentication

0:00:28.120000 --> 0:00:30.760000
 is supposed to take place
 between router one.

0:00:30.760000 --> 0:00:32.880000
 Actually, it gave us freedom.

0:00:32.880000 --> 0:00:36.400000
 You could have it happen between
 any two routers in your network.

0:00:36.400000 --> 0:00:39.840000
 I'm just choosing to have it happen
 between router one and router three.

0:00:39.840000 --> 0:00:43.660000
 If you want to choose a different pair
 of routers, that's perfectly fine.

0:00:43.660000 --> 0:00:46.800000
 Okay, so let's go ahead and get it
 working between these two routers.

0:00:46.800000 --> 0:00:51.000000
 So with EIGRP authentication, it's
 basically a two-step process.

0:00:51.000000 --> 0:00:54.240000
 Number one, we have to configure something
 called a keychain at the global

0:00:54.240000 --> 0:00:55.940000
 configuration level.

0:00:55.940000 --> 0:00:59.000000
 And that keychain is what's going
 to contain our password.

0:00:59.000000 --> 0:01:01.580000
 Otherwise known as a key string.

0:01:01.580000 --> 0:01:05.180000
 Then we have to go to
 the interface level.

0:01:05.180000 --> 0:01:08.580000
 And on the interface level, we have to
 tell it, hey, when you're speaking

0:01:08.580000 --> 0:01:12.120000
 EIGRP, I want you to implement
 authentication.

0:01:12.120000 --> 0:01:16.900000
 And I want you to refer back to this keychain
 and you'll find your password

0:01:16.900000 --> 0:01:19.100000
 over there. So let's
 go ahead and do that.

0:01:19.100000 --> 0:01:22.560000
 Let's create the keychain
 first on router one.

0:01:22.560000 --> 0:01:27.060000
 Keychain, and I'll
 just call it I&E.

0:01:27.060000 --> 0:01:30.300000
 And here we'll say key one.

0:01:30.300000 --> 0:01:33.160000
 We're just going to have one password
 in this particular case.

0:01:33.160000 --> 0:01:36.860000
 And key-string will also be I&E.

0:01:36.860000 --> 0:01:39.380000
 Save our config.

0:01:39.380000 --> 0:01:46.280000
 Now, before I actually do this,
 let's back up here for a second.

0:01:46.280000 --> 0:01:48.860000
 Let's close this out.

0:01:48.860000 --> 0:01:52.040000
 Let's shut down all
 of our routers.

0:01:52.040000 --> 0:01:55.500000
 And let's create a snapshot
 of where we are right now.

0:01:55.500000 --> 0:01:58.960000
 Before we add in our
 authentication.

0:01:58.960000 --> 0:02:03.160000
 So we've already created one snapshot,
 which was called IP addresses only.

0:02:03.160000 --> 0:02:08.900000
 Now let's create another
 one called EIGRP basic.

0:02:08.900000 --> 0:02:13.420000
 And we will remember that that's the configuration
 where EIGRP was working,

0:02:13.420000 --> 0:02:17.440000
 but we hadn't modified it yet by adding
 authentication or anything else

0:02:17.440000 --> 0:02:23.900000
 like that. And once again, remember
 that in order to create a snapshot

0:02:23.900000 --> 0:02:28.400000
 or restore to a previous snapshot,
 all of your iOS devices have to be

0:02:28.400000 --> 0:02:30.440000
 in the powered off state.

0:02:30.440000 --> 0:02:32.440000
 So let's go ahead and
 turn it back on.

0:02:32.440000 --> 0:02:38.180000
 Let's go back to router one and
 take up where we left off.

0:02:38.180000 --> 0:02:43.780000
 Now he should still have that keychain
 in there because I did save it

0:02:43.780000 --> 0:02:46.960000
 with the right memory command.

0:02:46.960000 --> 0:02:48.980000
 Let's just verify it.

0:02:48.980000 --> 0:02:53.260000
 Yes, he does. Okay, so now let's
 go on to his interface.

0:02:53.260000 --> 0:02:56.060000
 Interface fast ethernet
 zero slash zero.

0:02:56.060000 --> 0:02:59.220000
 And we're going to say
 IP authentication.

0:02:59.220000 --> 0:03:05.360000
 And then we'll say
 mode EIGRP 100 MD5.

0:03:05.360000 --> 0:03:11.160000
 So we're saying for EIGRP autonomous
 system 100 on this interface, use

0:03:11.160000 --> 0:03:13.260000
 MD5 authentication.

0:03:13.260000 --> 0:03:20.620000
 And then we have to say IP authentication
 key dash chain EIGRP 100, I

0:03:20.620000 --> 0:03:25.260000
 and E. Basically saying refer back
 to the keychain called I and E, and

0:03:25.260000 --> 0:03:29.340000
 you'll find your password
 or passwords there.

0:03:29.340000 --> 0:03:32.200000
 Let's save this.

0:03:32.200000 --> 0:03:36.100000
 Let's do a show run.

0:03:36.100000 --> 0:03:39.800000
 And now you probably won't have this
 ability in any kind of simulation

0:03:39.800000 --> 0:03:42.240000
 or anything that you
 do on your CCNA exam.

0:03:42.240000 --> 0:03:46.060000
 You probably won't have
 the ability to do this.

0:03:46.060000 --> 0:03:49.900000
 But what I'm just going to do is I'm
 going to just copy and paste the

0:03:49.900000 --> 0:03:54.640000
 relevant information over
 to the other router.

0:03:54.640000 --> 0:03:57.480000
 So let's go down to
 my keychain here.

0:03:57.480000 --> 0:04:02.500000
 Here we are. Just copy
 and paste this in here.

0:04:02.500000 --> 0:04:06.540000
 And then let's go down
 to the interface.

0:04:06.540000 --> 0:04:08.780000
 Fast ethernet zero zero.

0:04:08.780000 --> 0:04:11.880000
 And let's just copy that.

0:04:11.880000 --> 0:04:15.520000
 I'll strip out that IP address though
 because that will not be relevant

0:04:15.520000 --> 0:04:18.600000
 for router three.

0:04:18.600000 --> 0:04:21.500000
 And at the end of this,
 we'll just say and.

0:04:21.500000 --> 0:04:28.660000
 Okay, so let's go ahead
 and save router one.

0:04:28.660000 --> 0:04:33.080000
 And now let's get
 into router three.

0:04:33.080000 --> 0:04:44.200000
 Okay, and then let's just paste in
 what we just did on router one.

0:04:44.200000 --> 0:04:47.020000
 All the relevant stuff
 matches exactly.

0:04:47.020000 --> 0:04:54.560000
 Right click. And the neighbor
 relationship comes up.

0:04:54.560000 --> 0:04:56.720000
 So how do we know that authentication
 is working?

0:04:56.720000 --> 0:04:57.700000
 Well, there's several ways.

0:04:57.700000 --> 0:05:02.760000
 Show IP. EI JRP neighbor.

0:05:02.760000 --> 0:05:08.940000
 If authentication had failed, we would
 not have a neighbor on that interface.

0:05:08.940000 --> 0:05:13.720000
 Also show IP route EI JRP.

0:05:13.720000 --> 0:05:18.800000
 If authentication had failed, we would
 not have learned about any EI JRP

0:05:18.800000 --> 0:05:21.540000
 routes on that interface.

0:05:21.540000 --> 0:05:26.380000
 So it's sort of by inference that we
 can assume that authentication is

0:05:26.380000 --> 0:05:29.900000
 working because if it wasn't working,
 none of this other stuff would be

0:05:29.900000 --> 0:05:35.080000
 working either. So we'll save
 our configuration here.

0:05:35.080000 --> 0:05:39.020000
 Bring this down.

0:05:39.020000 --> 0:05:41.620000
 Turn off all of our routers.

0:05:41.620000 --> 0:05:44.900000
 And let's create another snapshot.


0:05:44.900000 --> 0:05:55.160000
 And we'll call this one
 EI JRP authentication.

0:05:55.160000 --> 0:06:01.900000
 And then close. And that concludes
 this section of the video.

0:06:01.900000 --> 0:06:05.640000
 So now we've got one more task to do
 in the next video, the last one of

0:06:05.640000 --> 0:06:10.140000
 this particular lab, we're going to
 number one verify what path is being

0:06:10.140000 --> 0:06:14.020000
 used between router one and router
 four to ping their loopbacks, which

0:06:14.020000 --> 0:06:17.180000
 is most likely that bottom path,
 the fast ethernet path.

0:06:17.180000 --> 0:06:20.940000
 And then we're going to manipulate EI
 JRP so that ultimately, when they

0:06:20.940000 --> 0:06:24.680000
 ping their loopbacks, they end up going
 across the slower speed link on

