WEBVTT

0:00:08.240000 --> 0:00:11.860000
 Okay, so let's start part one of this
 lab by actually bringing up GNS3,

0:00:11.860000 --> 0:00:15.860000
 naming our project, and then importing
 our various nodes, dragging and

0:00:15.860000 --> 0:00:18.700000
 dropping them where they need to be,
 and then connecting them via the

0:00:18.700000 --> 0:00:19.720000
 add a link tool.

0:00:19.720000 --> 0:00:21.500000
 So let's go ahead and
 start doing that.

0:00:21.500000 --> 0:00:26.800000
 So if you haven't already done so, I would
 recommend that you take a screenshot

0:00:26.800000 --> 0:00:31.320000
 of this image. So that you can follow
 along with me here, because I'm

0:00:31.320000 --> 0:00:35.400000
 going to move this off to
 my other screen as I work.

0:00:35.400000 --> 0:00:41.960000
 Okay, so let's go ahead and start GNS3,
 and we will name this project.

0:00:41.960000 --> 0:00:43.420000
 You can name it whatever you want.


0:00:43.420000 --> 0:00:57.580000
 I'm just going to name it CCNA switch
 lab, and then I'll save it.

0:00:57.580000 --> 0:01:00.920000
 Okay, so let's start building
 this up here.

0:01:00.920000 --> 0:01:02.920000
 According to our topology,
 we need three routers.

0:01:02.920000 --> 0:01:05.640000
 Let's go ahead and drag and
 drop those into place.

0:01:05.640000 --> 0:01:13.520000
 One, and I'll just use the shift key
 here to drag and drop two more.

0:01:13.520000 --> 0:01:22.940000
 All right. There we go.

0:01:22.940000 --> 0:01:25.700000
 Okay, we're also going to need
 an ethernet switch node.

0:01:25.700000 --> 0:01:30.840000
 So that will be over here in the
 section on browse switches.

0:01:30.840000 --> 0:01:34.080000
 So there we go. Ethernet switch.

0:01:34.080000 --> 0:01:39.120000
 Drop that into place.

0:01:39.120000 --> 0:01:43.680000
 But currently, we don't have the ether
 switch router that has the ether

0:01:43.680000 --> 0:01:44.620000
 switch module in it.

0:01:44.620000 --> 0:01:46.020000
 So I need to add that.

0:01:46.020000 --> 0:01:50.920000
 So what I'm going to do is I'm going to
 go here under edit and preferences.

0:01:50.920000 --> 0:01:55.180000
 Edit preferences.

0:01:55.180000 --> 0:02:01.660000
 And then here under dynamips, I'll select
 iOS routers, and then I'll select

0:02:01.660000 --> 0:02:08.720000
 new. I'll use the same image I'm already
 using, but this time I'm going

0:02:08.720000 --> 0:02:13.120000
 to select the ether switch box.

0:02:13.120000 --> 0:02:15.580000
 I'm going to give it the appropriate
 amount of memory, which I think is

0:02:15.580000 --> 0:02:20.020000
 256 megabits per second, according
 to Cisco's feature navigator.

0:02:20.020000 --> 0:02:22.480000
 And I'm not going to populate
 any of the other slots.

0:02:22.480000 --> 0:02:25.740000
 I'm just going to leave it with the
 16 port ether switch module because

0:02:25.740000 --> 0:02:28.840000
 I don't need to use this
 thing as a router at all.

0:02:28.840000 --> 0:02:36.000000
 And then lastly, I want to
 compute the idle PC value.

0:02:36.000000 --> 0:02:43.080000
 And this will take about a minute,
 maybe a little bit less.

0:02:43.080000 --> 0:02:52.060000
 There we go. We have an idle PC.

0:02:52.060000 --> 0:02:56.500000
 So let's OK that and finish.

0:02:56.500000 --> 0:03:02.940000
 Apply OK. And now we should have available
 to us our ether switch router.

0:03:02.940000 --> 0:03:08.020000
 So let's drag that, hit the shift key,
 let go, and yes, I do want two

0:03:08.020000 --> 0:03:18.060000
 of them. All right, let's go
 ahead and add in our links.

0:03:18.060000 --> 0:03:21.500000
 So router one, we'll use this fast ethernet,
 and that's going to end up

0:03:21.500000 --> 0:03:22.880000
 being our trunk.

0:03:22.880000 --> 0:03:28.620000
 And we'll connect that to
 fast ethernet 1,0 here.

0:03:28.620000 --> 0:03:32.680000
 And remember, because these ether switch
 routers are routers, they are

0:03:32.680000 --> 0:03:38.540000
 3725s, the first one or possibly two interfaces
 are actually routed interfaces.

0:03:38.540000 --> 0:03:41.740000
 They don't do switch port commands or
 spanning tree commands or anything

0:03:41.740000 --> 0:03:45.160000
 like that. So for the purposes of this
 lab, we're going to stay away from

0:03:45.160000 --> 0:03:46.920000
 those first two interfaces.

0:03:46.920000 --> 0:03:49.060000
 OK, now let's go over
 here to router two.

0:03:49.060000 --> 0:03:54.100000
 Same thing, connect this fast ethernet
 to the first switch port on here.

0:03:54.100000 --> 0:03:59.140000
 OK. Now let's connect our
 redundant links up here.

0:03:59.140000 --> 0:04:00.900000
 So we'll start at the bottom.

0:04:00.900000 --> 0:04:02.880000
 Fast ethernet 1,15.

0:04:02.880000 --> 0:04:05.800000
 We'll go to fast ethernet 1,15.

0:04:05.800000 --> 0:04:10.260000
 And fast ethernet,
 let's just say 1,9.

0:04:10.260000 --> 0:04:13.240000
 We'll go to fast ethernet 1,9.

0:04:13.240000 --> 0:04:17.500000
 All right, so we're almost done.

0:04:17.500000 --> 0:04:21.860000
 Now before we start connecting stuff up
 to the switch, the ethernet switch,

0:04:21.860000 --> 0:04:22.920000
 there's a problem.

0:04:22.920000 --> 0:04:26.880000
 Because if I right click on this and
 hit configure to see what currently

0:04:26.880000 --> 0:04:32.680000
 is, all of its interfaces are access
 ports and they're all in VLAN 1.

0:04:32.680000 --> 0:04:36.540000
 And as we talked about when we first introduced
 this node, you can't change

0:04:36.540000 --> 0:04:39.560000
 the characteristics of
 an existing interface.

0:04:39.560000 --> 0:04:43.260000
 Either have to delete that interface and
 then recreate it with the characteristics

0:04:43.260000 --> 0:04:46.540000
 you want or add a brand
 new interface.

0:04:46.540000 --> 0:04:49.560000
 So what I'm going to do is I'm just
 going to delete all of these.

0:04:49.560000 --> 0:04:55.460000
 All right, that looks all right.

0:04:55.460000 --> 0:05:03.000000
 And now, remember, according to our diagram
 here, we need to have a total

0:05:03.000000 --> 0:05:05.920000
 of three interfaces on that
 ethernet switch node.

0:05:05.920000 --> 0:05:08.340000
 One of them had to be 802.1q.

0:05:08.340000 --> 0:05:11.640000
 One of them had to be an
 access port in VLAN 2.

0:05:11.640000 --> 0:05:14.520000
 And the other one had to be
 an access port in VLAN 3.

0:05:14.520000 --> 0:05:20.020000
 So we need to be aware of that as we
 create these interfaces from scratch.

0:05:20.020000 --> 0:05:26.280000
 So here we go. I'll have interface
 1 be my access port in VLAN 2.

0:05:26.280000 --> 0:05:33.060000
 I'll have interface 2 be
 my access port in VLAN 3.

0:05:33.060000 --> 0:05:47.980000
 And I'll have interface 3 have a native
 VLAN of 1 and be an 802.1q trunk.

0:05:47.980000 --> 0:05:53.500000
 Apply. OK. Now, before I forget, I
 should write that on my diagram.

0:05:53.500000 --> 0:05:56.160000
 So this is interface 1.

0:05:56.160000 --> 0:05:59.420000
 This is interface 2.

0:05:59.420000 --> 0:06:02.100000
 And this is interface 3.

0:06:02.100000 --> 0:06:07.600000
 All right. Now when you do it in your own
 lab, you can use whatever interface

0:06:07.600000 --> 0:06:08.380000
 numbers you want.

0:06:08.380000 --> 0:06:12.260000
 But it is important that you have the
 .1q trunk and the VLANs where they're

0:06:12.260000 --> 0:06:14.420000
 supposed to be. All right.

0:06:14.420000 --> 0:06:16.240000
 So now let's go ahead and connect
 our interfaces here.

0:06:16.240000 --> 0:06:21.500000
 So router 3. Connect is fast ethernet
 port to port 3, which is my trunk.

0:06:21.500000 --> 0:06:29.000000
 Router 2. Connect fast
 ethernet 0.1 to port 1.

0:06:29.000000 --> 0:06:35.200000
 And connect fast ethernet
 1.0 to port 2.

0:06:35.200000 --> 0:06:41.300000
 All right. And that completes
 our physical connection.

0:06:41.300000 --> 0:06:43.480000
 Everything is where
 it needs to be now.

0:06:43.480000 --> 0:06:50.760000
 So at this point, I can minimize that
 and I can zoom in a little bit to

0:06:50.760000 --> 0:06:52.060000
 see a little bit more.

0:06:52.060000 --> 0:06:58.620000
 Now before I finish this off, let's
 go ahead and click on the show hide

0:06:58.620000 --> 0:07:04.160000
 interface labels so that we know
 which interfaces are where.

0:07:04.160000 --> 0:07:06.600000
 And of course, they get a little bit
 sloppy, especially when some of these

0:07:06.600000 --> 0:07:10.080000
 interfaces are so close
 to each other.

0:07:10.080000 --> 0:07:16.420000
 Okay. So this is why I drew everything
 on my whiteboard because I know

0:07:16.420000 --> 0:07:20.040000
 that 1 is here, 2 is here.

0:07:20.040000 --> 0:07:22.660000
 That's like that.

0:07:22.660000 --> 0:07:29.220000
 And now I don't remember which interface
 on router 2 connected to the

0:07:29.220000 --> 0:07:32.620000
 switch, but fortunately I can just
 hover over router 2 and it'll tell

0:07:32.620000 --> 0:07:38.580000
 me. It says that fast
 ethernet 0.0.

0:07:38.580000 --> 0:07:40.200000
 Let's see here. Here we go.

0:07:40.200000 --> 0:07:43.200000
 Fast ethernet 0.1 is
 connected to port 1.

0:07:43.200000 --> 0:07:47.480000
 Okay. So fast ethernet and let me just
 hover over that again in case you

0:07:47.480000 --> 0:07:48.540000
 couldn't see it.

0:07:48.540000 --> 0:07:51.240000
 You can notice down on the bottom.


0:07:51.240000 --> 0:07:58.020000
 Well, it got rid of that when I entered
 this tool, but you can see it

0:07:58.020000 --> 0:07:59.700000
 right there. Come on.

0:07:59.700000 --> 0:08:03.040000
 Come back up. There it is.

0:08:03.040000 --> 0:08:07.880000
 Fast ethernet 0.1 is connected
 to switch 1 on port 1.

0:08:07.880000 --> 0:08:10.260000
 That's what I need to see.

0:08:10.260000 --> 0:08:12.700000
 So 0.1 goes up here.

0:08:12.700000 --> 0:08:15.040000
 1.0 goes down here.

0:08:15.040000 --> 0:08:20.060000
 Let's just move his name off
 to the side a little bit.

0:08:20.060000 --> 0:08:27.040000
 Okay. And if we go up here, we just know
 that these numbers match on both

0:08:27.040000 --> 0:08:34.840000
 sides. Okay. And that concludes this
 section on building the physical

