WEBVTT

0:00:09.940000 --> 0:00:11.560000
 Statistics and troubleshooting
 with them.

0:00:11.560000 --> 0:00:17.020000
 It's basically, Wireshark takes a whole
 bunch of information and provides

0:00:17.020000 --> 0:00:20.980000
 it to you in a way in these summaries
 or give you tools so that you can

0:00:20.980000 --> 0:00:24.420000
 do baseline. So, in this slide, you
 can get general information about

0:00:24.420000 --> 0:00:29.100000
 everything that's going on so that
 you can make some decisions on what

0:00:29.100000 --> 0:00:34.700000
 you're seeing and how that is going to
 affect your troubleshooting process.

0:00:34.700000 --> 0:00:39.680000
 So, some of the most helpful ones which
 we've already touched on as we

0:00:39.680000 --> 0:00:42.740000
 were going through the other modules
 and we will continue to touch on

0:00:42.740000 --> 0:00:47.060000
 through future modules and hopefully
 you get into the habit of using if

0:00:47.060000 --> 0:00:54.640000
 you do not do so already is these summaries
 and these conversation summaries

0:00:54.640000 --> 0:01:01.680000
 to show you specifically what's on your
 network, what's speaking and what

0:01:01.680000 --> 0:01:04.060000
 it's speaking to.

0:01:04.060000 --> 0:01:11.900000
 What's communicating with what in what
 direction and other important pieces

0:01:11.900000 --> 0:01:17.880000
 of information such as what protocols
 are running, what is what was captured

0:01:17.880000 --> 0:01:22.680000
 helps you build out your filters, helps
 you to come to some conclusions

0:01:22.680000 --> 0:01:25.920000
 about what may be running
 on your network.

0:01:25.920000 --> 0:01:32.260000
 There is a whole subset of service response
 time graphs which allows you

0:01:32.260000 --> 0:01:39.920000
 to plot specific things like how if
 you're using an application how it's

0:01:39.920000 --> 0:01:47.420000
 actually being seen as a round trip
 or something of that nature and it's

0:01:47.420000 --> 0:01:48.360000
 plotted on a graph.

0:01:48.360000 --> 0:01:53.180000
 You can find these in statistics and
 you can use your I O graph where

0:01:53.180000 --> 0:01:58.200000
 you can add more filters and you can
 use flow graphs so that you can see

0:01:58.200000 --> 0:02:04.240000
 traffic flow, traffic flow patterns
 and this is extremely helpful when

0:02:04.240000 --> 0:02:11.800000
 looking at TCP specifically
 the TCP handshake.

0:02:11.800000 --> 0:02:16.020000
 So we briefly touched on it before as
 we were talking about filters because

0:02:16.020000 --> 0:02:21.400000
 I thought that it might be relevant to
 helping you build filters but this

0:02:21.400000 --> 0:02:25.560000
 is really where we're going to go into
 this menu and talk about what you

0:02:25.560000 --> 0:02:31.660000
 can find here. So on this menu you
 can select from about a dozen tools

0:02:31.660000 --> 0:02:37.120000
 which will allow you to do some statistical
 analysis with wire shark and

0:02:37.120000 --> 0:02:43.040000
 one of the key things here is that some
 of the tools that we already talked

0:02:43.040000 --> 0:02:49.460000
 about are found on this menu as well
 as some others which we will get

0:02:49.460000 --> 0:02:54.060000
 into in our future modules as we troubleshoot
 some specific problems.

0:02:54.060000 --> 0:03:00.220000
 For example if we're looking at some
 wireless LAN problems we will use

0:03:00.220000 --> 0:03:08.160000
 the wireless LAN traffic option to
 see specific SSID's as an example.

0:03:08.160000 --> 0:03:12.980000
 But regardless it should be something
 that you do get in the habit of

0:03:12.980000 --> 0:03:19.640000
 using, something that you're comfortable
 with and something that you test

0:03:19.640000 --> 0:03:24.020000
 with so that you can see specific
 options that are available.

0:03:24.020000 --> 0:03:29.040000
 So what I'll do is I will show you
 some of the things here that we can

0:03:29.040000 --> 0:03:32.520000
 do so let me clear out
 my filter from before.

0:03:32.520000 --> 0:03:36.820000
 And the first thing I want to do
 is I want to look at a summary.

0:03:36.820000 --> 0:03:43.040000
 So this is my capture summary it's
 everything that's in the capture.

0:03:43.040000 --> 0:03:50.560000
 As you can see here what's helpful is
 the name and location of the file

0:03:50.560000 --> 0:03:52.780000
 or the capture itself.

0:03:52.780000 --> 0:03:59.220000
 How big the capture is the file
 format which is PCAPNG.

0:03:59.220000 --> 0:04:03.260000
 We will talk about file formats in the
 last module but what's very important

0:04:03.260000 --> 0:04:09.200000
 about that module is that there's different
 formats you could save in

0:04:09.200000 --> 0:04:13.880000
 and if you save in the older format such
 as PCAP as an example these capture

0:04:13.880000 --> 0:04:19.200000
 file comments or packet comments will
 not translate over so you may miss

0:04:19.200000 --> 0:04:20.840000
 some information.

0:04:20.840000 --> 0:04:26.300000
 It will tell you date and time again
 as we've talked about in the future.

0:04:26.300000 --> 0:04:30.460000
 I'm sorry we talked about
 in the past module.

0:04:30.460000 --> 0:04:35.340000
 This is critically important to make
 sure that the timing on your system

0:04:35.340000 --> 0:04:41.200000
 is accurate maybe use NTP otherwise
 you're going to have incorrect time.

0:04:41.200000 --> 0:04:45.260000
 How long the capture was where
 it was caught and so on.

0:04:45.260000 --> 0:04:51.340000
 So there's a lot of information here
 that you can glean specifically the

0:04:51.340000 --> 0:04:55.900000
 amount of packets and this is a good
 one right here between first and

0:04:55.900000 --> 0:05:01.140000
 last packet your average
 time and seconds.

0:05:01.140000 --> 0:05:06.200000
 Where does this play into being helpful
 is that if you were just capturing

0:05:06.200000 --> 0:05:11.300000
 a simple conversation that you were
 running a pre-capture filter on and

0:05:11.300000 --> 0:05:16.060000
 you knew that you were isolating that
 conversation you might be able to

0:05:16.060000 --> 0:05:23.480000
 find right there that that entire conversation
 took X amount of seconds.

0:05:23.480000 --> 0:05:28.080000
 So there's some things that you could
 do to get the information in here

0:05:28.080000 --> 0:05:33.100000
 more accurate and this could be very
 helpful in determining some high

0:05:33.100000 --> 0:05:36.640000
 level causes of an issue.

0:05:36.640000 --> 0:05:43.540000
 So also there's some comments summary
 so if you made comments in the packets

0:05:43.540000 --> 0:05:47.540000
 you will be able to pull them there
 and it's nice because you can either

0:05:47.540000 --> 0:05:51.780000
 save it as or copy and save as you
 can save this in the next class.

0:05:51.780000 --> 0:05:54.900000
 So you can see the information
 pasted into a report.

0:05:54.900000 --> 0:06:00.120000
 You can show address resolution the
 protocol hierarchy which we already

0:06:00.120000 --> 0:06:06.480000
 covered in a previous module will show
 you your top talking information.

0:06:06.480000 --> 0:06:13.100000
 Your data on your network and
 what protocols were in use.

0:06:13.100000 --> 0:06:16.740000
 You can see your conversations.

0:06:16.740000 --> 0:06:24.040000
 This was critically important for us to
 figure out where to apply a conversation

0:06:24.040000 --> 0:06:29.400000
 filter. As we mentioned before
 we can filter directly on.

0:06:29.400000 --> 0:06:36.560000
 Okay. Other important statistics
 is the end point list.

0:06:36.560000 --> 0:06:39.060000
 You can find what end
 points are in here.

0:06:39.060000 --> 0:06:42.540000
 You can search and find what
 your packet links are.

0:06:42.540000 --> 0:06:47.780000
 One of the helpful things in here,
 sorry open on the wrong screen, is

0:06:47.780000 --> 0:06:53.020000
 that when you search for packet links
 why this could be so helpful to

0:06:53.020000 --> 0:07:01.760000
 you is that we essentially would not
 want a ton of tiny packets on our

0:07:01.760000 --> 0:07:05.220000
 network. It just makes
 everything work harder.

0:07:05.220000 --> 0:07:07.940000
 It inundates buffers.

0:07:07.940000 --> 0:07:15.680000
 What we would rather have is something
 in the correct MTU size and or

0:07:15.680000 --> 0:07:19.060000
 jumble frames if you have everything
 enabled across your network.

0:07:19.060000 --> 0:07:24.880000
 So it all comes in one conversation
 and it's not inundated with packets

0:07:24.880000 --> 0:07:26.560000
 to increase I.O.

0:07:26.560000 --> 0:07:33.180000
 As you can see in this summary there's
 actually a lot of little packets.

0:07:33.180000 --> 0:07:37.880000
 So that might be something you want to
 look at as you're troubleshooting.

0:07:37.880000 --> 0:07:41.820000
 You may want to say well you know what
 maybe poor performance is because

0:07:41.820000 --> 0:07:44.260000
 there's a lot of small packets.

0:07:44.260000 --> 0:07:48.640000
 You can build an I.O.

0:07:48.640000 --> 0:07:51.520000
 graph. This will show you
 some specific things.

0:07:51.520000 --> 0:07:56.160000
 We do a module on this so I don't want
 to go too deeply into it here but

0:07:56.160000 --> 0:08:01.760000
 you can filter specifically on some
 traffic so I believe this is an HTTP

0:08:01.760000 --> 0:08:05.900000
 in here. And I can see in
 here some some spiking.

0:08:05.900000 --> 0:08:14.440000
 So it allows me to do things with it
 so that I can really see what's going

0:08:14.440000 --> 0:08:18.700000
 on and I can change
 the way I see it.

0:08:18.700000 --> 0:08:27.080000
 But you can get these very quickly
 from your statistics menu.

0:08:27.080000 --> 0:08:29.480000
 You can do a compare.

0:08:29.480000 --> 0:08:34.460000
 You can pull up specific
 HTTP information.

0:08:34.460000 --> 0:08:37.280000
 The requests as an example.

0:08:37.280000 --> 0:08:43.400000
 You can do your TCP or your UDP
 streams graphs from here.

0:08:43.400000 --> 0:08:47.760000
 One thing to mention is if you're highlighting
 a packet in your packets

0:08:47.760000 --> 0:08:56.640000
 list pane and it happens to be a packet
 that is TCP it will be grayed

0:08:56.640000 --> 0:08:58.660000
 out and you will not
 be able to see it.

0:08:58.660000 --> 0:09:02.740000
 So that may be something that
 you want to take heat of.

0:09:02.740000 --> 0:09:10.540000
 Or if it's UDP it will allow you to pull
 up a graph of the actual traffic

0:09:10.540000 --> 0:09:14.120000
 and you can do some statistical
 analysis on this.

0:09:14.120000 --> 0:09:20.740000
 The flow graph. This
 is very helpful.

0:09:20.740000 --> 0:09:25.260000
 We'll just look at all
 packets at TCP flow.

0:09:25.260000 --> 0:09:29.580000
 We also have another module on this
 so we won't get very deep into it

0:09:29.580000 --> 0:09:31.080000
 but where this is helpful.

0:09:31.080000 --> 0:09:36.020000
 It will let you know from what particular
 IP to another particular IP

0:09:36.020000 --> 0:09:42.520000
 packet by packet specifically showing
 you the time deltas exactly what's

0:09:42.520000 --> 0:09:49.040000
 taking place. So you can see for example
 a large amount of resets if that's

0:09:49.040000 --> 0:09:51.180000
 something that was problematic.

0:09:51.180000 --> 0:09:57.240000
 Or you may see duplicate acts if that
 you believe that it shouldn't be

0:09:57.240000 --> 0:09:58.480000
 retransmitting as much.

0:09:58.480000 --> 0:10:04.260000
 So there's a lot of information
 that you can glean from in here.

0:10:04.260000 --> 0:10:05.920000
 And so on and so forth.

0:10:05.920000 --> 0:10:11.340000
 So we don't want to get too deeply into
 each one of those tools because

0:10:11.340000 --> 0:10:15.160000
 we have a separate module on them but
 it was something where we wanted

0:10:15.160000 --> 0:10:23.040000
 to show you that yes you can in fact
 pull up some key data and statistics

0:10:23.040000 --> 0:10:30.480000
 from here. And you can look
 at your capture as a whole.

0:10:30.480000 --> 0:10:35.240000
 And that's essentially what we really
 want out of this menu is the tools.

0:10:35.240000 --> 0:10:39.280000
 We want to say okay well as a whole
 what does this capture look like in

0:10:39.280000 --> 0:10:46.400000
 the realm of protocols in the realm
 of errors in the realm of objects

0:10:46.400000 --> 0:10:52.180000
 in the realm of whatever it is that
 you want to see as a menu option.

0:10:52.180000 --> 0:10:54.280000
 What does it look like as a whole.


0:10:54.280000 --> 0:10:58.100000
 And then we can actually drill down from
 there into key areas of it which

0:10:58.100000 --> 0:11:00.280000
 is extremely helpful.

0:11:00.280000 --> 0:11:04.980000
 It's actually this is very helpful
 for when you run a capture for the

0:11:04.980000 --> 0:11:11.480000
 first time. A lot of times it would
 be how it would be suggested that

0:11:11.480000 --> 0:11:15.800000
 you open this menu up and you really
 take a deep dive into the overall

0:11:15.800000 --> 0:11:20.900000
 of what's going on so that you can then
 decide how you want to drill down.

0:11:20.900000 --> 0:11:26.660000
 This is very helpful for large captures
 that you may not know exactly

0:11:26.660000 --> 0:11:27.800000
 what the issue is.

0:11:27.800000 --> 0:11:32.040000
 You may not even know what's running
 on the network because you may not

0:11:32.040000 --> 0:11:39.540000
 be familiar with it or you may
 just not know that it's there.

0:11:39.540000 --> 0:11:45.340000
 So, water shark will allow you to do
 statistics, statistical analysis

0:11:45.340000 --> 0:11:50.740000
 and the data. We find it through the
 statistics menu and some of the very

0:11:50.740000 --> 0:11:56.480000
 helpful very helpful things we can glean
 from this menu and its options

0:11:56.480000 --> 0:12:02.680000
 and its tools is what protocols are
 running on your network that wire

0:12:02.680000 --> 0:12:05.780000
 shark has captured
 from that segment.

0:12:05.780000 --> 0:12:10.880000
 What are the top talkers who is talking
 the most and from whom to whom

0:12:10.880000 --> 0:12:16.320000
 and is it a one to many or many
 to one type of conversation?

0:12:16.320000 --> 0:12:19.620000
 Is it a unicast?

0:12:19.620000 --> 0:12:22.960000
 What type of conversation is it?

0:12:22.960000 --> 0:12:27.780000
 We have some tools in there that we
 will get into in more detail but we

0:12:27.780000 --> 0:12:34.680000
 have specific tools that will allow
 us to gather more information about

0:12:34.680000 --> 0:12:37.020000
 the capture that we just took.

0:12:37.020000 --> 0:12:41.600000
 Two notes, remember things
 may be grayed out.

0:12:41.600000 --> 0:12:44.140000
 They'll be grayed out if
 they're not in option.

0:12:44.140000 --> 0:12:49.580000
 So, if you do not have any wireless
 traffic, the wireless LAN or WLAN

0:12:49.580000 --> 0:12:57.840000
 traffic tool will not be available to
 you so be wary that if it's grayed

0:12:57.840000 --> 0:13:03.360000
 out its for a reason its because
 its not relevant to that capture.

0:13:03.360000 --> 0:13:08.800000
 And make sure that as you're going
 through your capture you're making

0:13:08.800000 --> 0:13:14.500000
 notes. You can paste a lot of this stuff
 into a report or export it into

0:13:14.500000 --> 0:13:21.460000
 a report to give you an overall baseline
 of your network operating under

0:13:21.460000 --> 0:13:28.140000
 good conditions and if operating at
 a performance degradation you can

0:13:28.140000 --> 0:13:30.800000
 look at both reports
 and or both captures.

0:13:30.800000 --> 0:13:35.820000
 And figure out statistically
 what the differences are.

0:13:35.820000 --> 0:13:42.480000
 And lastly, just remember one of the
 key aspects of using this tool.

0:13:42.480000 --> 0:13:47.260000
 Let's find out what's running on our
 network, what we're capturing so

0:13:47.260000 --> 0:13:54.480000
 that we can then further drill down into
 it if we're not seeing for example

0:13:54.480000 --> 0:14:01.280000
 SNMP as you do not see in this
 particular statistics.

0:14:01.280000 --> 0:14:06.000000
 Capture, you may not want to start
 worrying about how to build filters

0:14:06.000000 --> 0 -

162
00:13:42,482 --> 00:13:47,202
let's find out what's running on our network,
what we're capturing.

163
00:13:47,202 --> 00:13:50,807
So that we can then further drill down into it.

164
00:13:50,807 --> 00:13:59,883
If we're not seeing, for example, SNMP
as you do not see in this particular statistics.

165
00:13:59,892 --> 00:14:06,544
Capture - you may not want to start 
worrying about how to build filters for it

166
00:14:06,543 --> 00:14:10,033
because it's likely that it's not there
in the capture to search for.

167
00:14:10,033 --> 00:14:15,884
So, hopefully that through this module,
 these tools and learning about them 

168
00:14:15,893 --> 00:14:21,013
has made it easier and more efficient 
for you to use Wireshark.

169
00:14:21,013 --> 00:14:25,339
Alright, so one of the questions in the chat are

170
00:14:25,336 --> 00:14:32,387
do we have scenarios of issues 
to go through and how we use Wireshark 

171
00:14:32,387 --> 00:14:34,387
to come to the conclusion of a problem?

172
00:14:34,387 --> 00:14:41,018
So, if you look at the syllabus, 
tomorrow is pretty much all that.

173
00:14:41,018 --> 00:14:46,071
We're going to go through voice, HTTP, 

174
00:14:46,071 --> 00:14:52,180
FTP, wireless, each module is a problem.

175
00:14:52,180 --> 00:14:55,991
And we'll look at Wireshark and figure out
how to solve that problem.

176
00:14:55,991 --> 00:15:01,637
So yes, today I'm prepping that in as we talk 
about the tools themselves.

177
00:15:01,637 --> 00:15:08,911
So as an example, we did bring up a DNS issue
 where the client could not communicate.

178
00:15:08,911 --> 00:15:12,363
It was in a large capture full of data.

179
00:15:12,363 --> 00:15:17,222
So we filtered out all the data 
that we did not need to see

180
00:15:17,222 --> 00:15:22,421
and we isolated the communication
adn showed the actual failure

181
00:15:22,421 --> 00:15:25,720
of the client being able to resolve DNS.

182
00:15:25,736 --> 00:15:29,345
So, yes, we do have scenarios.

183
00:15:29,364 --> 00:15:34,181
Today will be scenarios that are put in to the modules.

184
00:15:34,181 --> 00:15:38,183
Whereas tomorrow's, the modules 
each one of them is a scenario.

185
00:15:38,183 --> 00:15:42,343
So I hope that helps answer your question.

186
00:15:42,343 --> 00:15:46,500
Packet loss is a little tricky to capture.

187
00:15:46,500 --> 00:15:48,500
Wireshark will give you clues.

188
00:15:48,500 --> 00:15:52,550
One of the things that we're going to talk about
in the next module is using the flow graph

189
00:15:52,550 --> 00:15:56,007
which actaully the timing of that question is perfect

190
00:15:56,007 --> 00:15:59,470
because the flow graph is going to be able to show you

191
00:15:59,483 --> 00:16:06,775
specifically when you pick the TCP flow,
how well it's perform

192
00:16:06,783 --> 00:16:11,080
your application is performing.
So for example, if you're trying to 

193
00:16:11,080 --> 00:16:15,575
send a request to pull a webpage

194
00:16:15,575 --> 00:16:20,659
and you see in capture that
 the data keeps re-transmitting

195
00:16:20,659 --> 00:16:22,659
or you're getting duplicate acts or

196
00:16:22,659 --> 00:16:25,837
you're seeing a lot of re-transmissions,

197
00:16:25,837 --> 00:16:31,018
it's likely that, that something 
may be getting dropped somewhere.

198
00:16:31,018 --> 00:16:35,878
It could be something else 
but there's a way to, to isolate that 

199
00:16:35,881 --> 00:16:38,660
and the clue that, the clues that you're going to get

200
00:16:38,682 --> 00:16:40,902
may be from Wireshark's flow graph.

201
00:16:40,902 --> 00:16:44,002
So, we're going to get into that in the next section

202
00:16:44,002 --> 00:16:45,351
but just real quick,

203
00:16:45,351 --> 00:16:49,102
when you go to the statistics menu,
when you pull up flow graph,

204
00:16:49,102 --> 00:16:53,940
you can take a look at either all 
or displayed packets, the TCP flow,

205
00:16:53,940 --> 00:17:00,964
and it will show you a very detailed view 

206
00:17:00,964 --> 00:17:04,625
of exactly what's going on from source to destination.

207
00:17:04,625 --> 00:17:08,719
There's actually multiple IP's up here,
source to destination.

208
00:17:08,719 --> 00:17:10,719
That's what the arrow is showing you.

209
00:17:10,719 --> 00:17:13,158
And it will show all the TCP communication.

210
00:17:13,158 --> 00:17:17,340
Here I have a bunch of resets which could be an issue.

211
00:17:17,340 --> 00:17:21,612
If you see a ton of resets coming back, 
there's obviously something wrong there.

212
00:17:21,612 --> 00:17:30,098
If I see constant duplications of an act
that may be something's getting dropped

213
00:17:30,098 --> 00:17:34,929
and it has to resend it.
So, there's some granular filters

214
00:17:34,929 --> 00:17:39,567
you can look, put in which we covered in
another Q&A section.

215
00:17:39,567 --> 00:17:43,783
Or you can use something such as the flow graph

216
00:17:43,783 --> 00:17:48,124
to try to figure out what's going on
from one IP to another IP.

217
00:17:48,124 --> 00:17:50,698
And see if that gives you a hint.

218
00:17:50,698 --> 00:17:57,793
You can also go to the analyze menu 
and look at the Expert

219
00:17:57,793 --> 00:18:01,564
where it may tell you, as an example

220
00:18:01,564 --> 00:18:04,367
that you have duplicate acknowledgements.

221
00:18:04,367 --> 00:18:06,158
And you have many of them.

222
00:18:06,158 --> 00:18:12,723
They may be coming from the same IP,
source to destination.

223
00:18:12,723 --> 00:18:18,116
We have tons of suspected re-transmissions,
that may be an issue.

224
00:18:18,116 --> 00:18:22,081
We can have windowing problems 
where buffers are overloaded.

225
00:18:22,081 --> 00:18:29,869
So, all of these things
basically could relate to packet loss.

226
00:18:29,869 --> 00:18:35,877
And the more that you dig in to the tool 
and figure out specifically from one IP to another

227
00:18:35,877 --> 00:18:38,830
where you may think there's a performance issue

228
00:18:38,830 --> 00:18:44,009
by isolating re-transmissions, 
duplicated acknowledgements,

229
00:18:44,009 --> 00:18:49,567
windowing problems. If you see all these stuff
from something that's performing poorly

230
00:18:49,567 --> 00:18:54,991
it's likely that you may have some, some packet loss.

231
00:18:54,991 --> 00:19:02,918
