1
00:00:00,000 --> 00:00:08,682


2
00:00:08,682 --> 00:00:11,502
So a couple of great questions came up

3
00:00:11,509 --> 00:00:15,314
on looking deeper into things and 

4
00:00:15,319 --> 00:00:18,803
I mentioned this earlier in the course that 

5
00:00:18,803 --> 00:00:23,437
Wireshark is extremely helpful,
extremely powerful but

6
00:00:23,437 --> 00:00:28,087
there are enterprise tool sets 
out there that will allow you 

7
00:00:28,087 --> 00:00:35,228
to do more with network and protocol
and traffic analysis and some of them

8
00:00:35,228 --> 00:00:40,187
as mentioned again earlier in the,
 in the foundations course was

9
00:00:40,187 --> 00:00:44,825
Riverbed who owns a huge take in Wireshark. 

10
00:00:44,825 --> 00:00:50,204
They have tools such as Cascade, ARX.

11
00:00:50,204 --> 00:00:55,846
There's agents that run directly on the systems
themselves all the way through the network.

12
00:00:55,838 --> 00:00:59,304
And it'll all give you an entire picture 
of application response 

13
00:00:59,304 --> 00:01:02,367
all the way down to the database layer of an application.

14
00:01:02,367 --> 00:01:08,403
So, there are many tool sets that you can use

15
00:01:08,403 --> 00:01:12,494
however, for the folks of this course, is on Wireshark.

16
00:01:12,494 --> 00:01:14,494
And what you can do directly with it.

17
00:01:14,494 --> 00:01:19,539
If you can get the foundations down,
move in to more advanced functionality,

18
00:01:19,539 --> 00:01:22,203
and then into those enterprise tool sets,

19
00:01:22,203 --> 00:01:28,451
you will be able to quickly and very easily tell 
what's going on on your network at all times.

20
00:01:28,459 --> 00:01:31,778
And the systems that live and operate them.

21
00:01:31,778 --> 00:01:37,237
Ok, in this module, we will be talking 
about command-line tools.

22
00:01:37,237 --> 00:01:42,346
So interestingly with Wireshark,

23
00:01:42,346 --> 00:01:48,064
and with Cisco, and with Unix, 
and with Windows,

24
00:01:48,064 --> 00:01:52,559
a lot of people like operating at the command-line.

25
00:01:52,559 --> 00:01:58,253
Some of us, for geeky reasons,
we prefer to type specifically what we want.

26
00:01:58,253 --> 00:02:03,310
We don't necessarily need to point and click,
and go through an entire subset of menus.

27
00:02:03,310 --> 00:02:09,609
Some of us are able to operate very quickly
while using the command-line.

28
00:02:09,609 --> 00:02:17,099
And by doing so, you can understand things
and move very quickly through them 

29
00:02:17,099 --> 00:02:20,270
but you have to know the command-line.

30
00:02:20,270 --> 00:02:23,778
What else is it beneficial for? Scripting.

31
00:02:23,778 --> 00:02:27,424
So, you can automate pretty much 
anything that you want

32
00:02:27,418 --> 00:02:29,984
on a, on just about any system

33
00:02:30,002 --> 00:02:32,833
because if you have the ability to do things 
at the command-line,

34
00:02:32,828 --> 00:02:39,638
and then you can write file, scripts, bad files,
 script, scripts into the shell.

35
00:02:39,646 --> 00:02:45,248
There's a lot of things that you can create
to automate functionality.

36
00:02:45,248 --> 00:02:51,343
So, that's another reason why a lot of people
work with and enjoy the command-line.

37
00:02:51,343 --> 00:02:55,121
So for purposes of this course,

38
00:02:55,121 --> 00:03:01,100
and what we're going to be doing, 
I've fired up a VM with Linux on it

39
00:03:01,100 --> 00:03:04,862
which we will go through and we will use tshark

40
00:03:04,862 --> 00:03:08,471
and some of the other tools, 
just so you can be aware of them.

41
00:03:08,471 --> 00:03:11,098
So the command-line tools that you will see,

42
00:03:11,098 --> 00:03:16,097
the ones that are available with Wireshark,

43
00:03:16,097 --> 00:03:19,068
is first and foremost, tshark.

44
00:03:19,068 --> 00:03:23,967
So, you're operating at a terminal. 
You want to use Wireshark functionality.

45
00:03:23,967 --> 00:03:29,042
Very, very similar to tcpdump which is next on the list.

46
00:03:29,042 --> 00:03:32,730
Both of these are packet capture tools.

47
00:03:32,730 --> 00:03:36,003
Tcpdump has been around for ages,

48
00:03:36,026 --> 00:03:40,444
standard with most Unix and Linux operating systems.

49
00:03:40,458 --> 00:03:45,362
It is also found on a great many firewalls.

50
00:03:45,362 --> 00:03:49,630
If any of you ever used some other firewalls

51
00:03:49,630 --> 00:03:55,176
other than basically, Cisco proprietary firewalls,

52
00:03:55,176 --> 00:04:01,957
McAfee sidewinders as an example.
You can run tcpdump right on the console.

53
00:04:01,957 --> 00:04:08,232
So there's a lot of, there's a lot of tcpdump, tshark-ish

54
00:04:08,252 --> 00:04:12,009
command-line packet capture tools available

55
00:04:12,003 --> 00:04:17,845
very freely, on most, if not all systems.

56
00:04:17,845 --> 00:04:23,529
Other command-line tools 
that you may encounter - dumpcap, 

57
00:04:23,538 --> 00:04:26,661
rawshark, editcap, mergecap.

58
00:04:26,671 --> 00:04:30,150
Some of them are very, very self-explanatory.

59
00:04:30,150 --> 00:04:35,881
So, as an example, if you wanted to run a packet capture,

60
00:04:35,881 --> 00:04:39,591
on the command-line and we can do that,
right from here.

61
00:04:39,591 --> 00:04:42,802
In this VM, I have tshark running.

62
00:04:42,802 --> 00:04:46,934
And it is simply just capturing all the data 
in the background while we're talking.

63
00:04:46,934 --> 00:04:55,741
We can, in fact, capture data.
We can stop it and then we can move to

64
00:04:55,741 --> 00:05:00,198
to editing it or merging it with another capture file.

65
00:05:00,198 --> 00:05:07,386
So, each one of these utilities is used 
to get into the capture and work with it.

66
00:05:07,394 --> 00:05:11,228
So, you can do pretty much the same things

67
00:05:11,229 --> 00:05:14,559
that you can do with Wireshark 
with the command-line tools.

68
00:05:14,559 --> 00:05:19,825
But obviously, not everything. Some of the tools 
that we went through in earlier modules,

69
00:05:19,825 --> 00:05:26,763
such as the flow graph and this, 
this plotting statistical tools.

70
00:05:26,771 --> 00:05:32,891

They are in the GUI only. But I will say this, 
that if you're running Wireshark

71
00:05:32,891 --> 00:05:36,563
let's say on Linux, yes you can use tshark but

72
00:05:36,563 --> 00:05:42,177
it's also, the GUI version is available, 
so you can just run it right from there.

73
00:05:42,177 --> 00:05:49,086
So we'll let that run in the background.

74
00:05:49,086 --> 00:05:53,353
So as we just mentioned, a little bigger there for you,

75
00:05:53,353 --> 00:05:55,713
the command-line tools are right now,

76
00:05:55,722 --> 00:05:59,485
we're running a packet capture on Linux using tshark,

77
00:05:59,511 --> 00:06:05,208
very much again, like tcpdump. 
We'll also look at tcpdump but

78
00:06:05,224 --> 00:06:12,767
specifically, it's just capturing the packets,
packets list pane data.

79
00:06:12,766 --> 00:06:19,329
Right there for you to see, scrolling.
You could see specific information scrolling by.

80
00:06:19,329 --> 00:06:26,201
I see a lot of name querying, so just as an example.

81
00:06:26,201 --> 00:06:31,903
And then other tools, such as tcpdump,
very similar.

82
00:06:31,903 --> 00:06:36,138
So what I wanted to do while we are running this,

83
00:06:36,160 --> 00:06:45,424
is I also wanted to run a tcpdump.

84
00:06:45,436 --> 00:06:52,595
It'll run that awhile.
And then to stimulate some traffic,

85
00:06:52,587 --> 00:06:55,762
I'll just do a dig and do some basic querying.

86
00:06:55,822 --> 00:06:59,922
So just generate a whole bunch of traffic 
on the network and there we go.

87
00:06:59,922 --> 00:07:07,233
Alright so, as we mentioned before, 
there's a lot of things that we can use

88
00:07:07,233 --> 00:07:11,033
to capture data but if we're going to do it 
at the command-line, 

89
00:07:11,033 --> 00:07:14,885
we're going to be using primarily 
tcpdump or tshark.

90
00:07:14,885 --> 00:07:20,999
Tcpdump is generally found on most 
Linux and Unix distributions.

91
00:07:20,999 --> 00:07:25,582
Again as mentioned before, 
on a bunch of firewall distributions,

92
00:07:25,588 --> 00:07:27,916
there's variations of these.

93
00:07:27,921 --> 00:07:34,335
I recommend playing around with this.
It will show you very quickly 

94
00:07:34,347 --> 00:07:37,350
and easily what may be going on on your network

95
00:07:37,350 --> 00:07:38,550
at the command-line.

96
00:07:38,550 --> 00:07:42,081
So for example, 
you're troubleshooting a Linux host,

97
00:07:42,081 --> 00:07:45,682
you do a quick ifconfig.
You see what IP address you have.

98
00:07:45,682 --> 00:07:51,613
Ok, that's my source, what am I going to,
maybe do a quick dig

99
00:07:51,641 --> 00:07:55,975
and you try to resolve a website,
ok there's my destination.

100
00:07:55,975 --> 00:08:00,089
Run a tcpdump or tshark.

101
00:08:00,089 --> 00:08:06,297
And just start capturing data and have an idea 
of where, what my source and destination is.

102
00:08:06,297 --> 00:08:10,664
And once I am done with that capture,
I can close it, I can save it 

103
00:08:10,675 --> 00:08:13,110
and then I can parse it further.

104
00:08:13,110 --> 00:08:19,733
I can edit it. I can merge it with 
other capture files and so on.

105
00:08:19,733 --> 00:08:30,014
And here's just a little bit of a closer look 
at a tcpdump.

106
00:08:30,014 --> 00:08:40,300
And some more questions based on this,
and examples -

107
00:08:40,328 --> 00:08:47,092
Again here, everything off the command-line
can be run pretty quickly.

108
00:08:47,083 --> 00:08:52,861
You stop the tshark process. 
You can stop the tcpdump process.

109
00:08:52,861 --> 00:08:57,411
And you can run it directly from the command-line here.

110
00:08:57,462 --> 00:09:00,727
If you're following the syllabus, 

111
00:09:00,731 --> 00:09:04,527
the next module I'm going into is based on tsharks.

112
00:09:04,527 --> 00:09:09,784
So these questions are perfectly aligned 
with what we will be talking about.

113
00:09:09,784 --> 00:09:16,181
However, prior to getting to them,
 I will answer some of these questions now.

114
00:09:16,181 --> 00:09:21,960
So one of the questions that was asked was
'can you do more than just run a capture?'

115
00:09:21,960 --> 00:09:25,264
Can you do other things with tshark?
And the answer is yes.

116
00:09:25,264 --> 00:09:30,658
So, obviously if you're familiar with Unix, 
the demand pages, 

117
00:09:30,674 --> 00:09:34,170
there's information here that I can pull.

118
00:09:34,205 --> 00:09:41,468
I type man space tshark.
And it basically gives me the syntax

119
00:09:41,498 --> 00:09:44,662
that I need to be able to pull

120
00:09:44,691 --> 00:09:49,008
pretty much what it is that I would do from a GUI.

121
00:09:49,012 --> 00:09:51,515
Now, it won't do as I said,

122
00:09:51,529 --> 00:09:54,018
everything the GUI will do, but it will do quite a bit.

123
00:09:54,018 --> 00:09:58,965
And this is the missing link here,
it's the actual syntax that you will apply.

124
00:09:58,965 --> 00:10:04,011
So as an example, and remember 
that with Unix and Linux,

125
00:10:04,218 --> 00:10:06,218
everything is case sensitive.

126
00:10:06,424 --> 00:10:13,111
If you wanted to specifically apply settings,
you could look through here and say that,

127
00:10:13,127 --> 00:10:20,214
"ok, I want to do a display filter,
which would be minus upper case Y,

128
00:10:20,213 --> 00:10:27,118
capture would be minus lower case s."

129
00:10:27,118 --> 00:10:33,525
So the more you play around with it,
the more that you can get some data out of it.

130
00:10:33,529 --> 00:10:40,175
But yes, running tshark with these options
is going to help you get more granulized data.

131
00:10:40,175 --> 00:10:45,364
And yes, you can run filters and yes, 
you can specify different things 

132
00:10:45,376 --> 00:10:47,690
when you're running tshark.

133
00:10:47,713 --> 00:10:54,657
So let me, actually supersize this so you can see it.

134
00:10:54,654 --> 00:10:57,857
And I apologize, it's a little small but

135
00:10:57,869 --> 00:11:07,958
if you type in man space tshark, you will get a
entire listing of options that you can use.

136
00:11:07,958 --> 00:11:15,046
Ok that was one question, 
and in the chat, if I'm not,

137
00:11:15,132 --> 00:11:17,254
if I don't answer your question completely,

138
00:11:17,259 --> 00:11:22,994
feel free to repost the question 
with more clear instructions 

139
00:11:23,011 --> 00:11:25,601
on what it is that you would like me to answer.

140
00:11:25,595 --> 00:11:32,242
In which cases would you use 
the command-line versus the GUI?

141
00:11:32,242 --> 00:11:38,013
As we mentioned before,

142
00:11:38,043 --> 00:11:41,188
it's just quicker and easier if that's what you're used to.

143
00:11:41,264 --> 00:11:44,861
It's a lot less overhead on the system.

144
00:11:44,861 --> 00:11:48,373
You don't have to load up the Wireshark tool.

145
00:11:48,373 --> 00:11:52,488
Although it doesn't take up a tremendous 
amount of memory, the capture will.

146
00:11:52,488 --> 00:11:57,674
It's still low overhead. It's helpful in that way.

147
00:11:57,674 --> 00:12:02,710
It's also helpful in the sense, 
as I mentioned before if you're running scripts

148
00:12:02,710 --> 00:12:05,346
and you want to script some of this out
and automate it.

149
00:12:05,346 --> 00:12:09,492
You can do so with these types of commands.

150
00:12:09,492 --> 00:12:15,623
Essentially, that's one, one of the major reasons
people like to use the command-line

151
00:12:15,623 --> 00:12:18,723
is that they can script out what it is that they want to do 

152
00:12:18,746 --> 00:12:22,108
and then launch it as a shell script.

153
00:12:22,123 --> 00:12:29,331
