WEBVTT

0:00:09.580000 --> 0:00:15.200000
 T-Shark is a command line tool that you
 can run from a Linux based distribution.

0:00:15.200000 --> 0:00:20.160000
 It is helpful in capturing
 packet data.

0:00:20.160000 --> 0:00:24.340000
 It's very similar to what
 you do in Wireshark.

0:00:24.340000 --> 0:00:29.240000
 However, it is Wireshark at the
 command line, at the terminal.

0:00:29.240000 --> 0:00:35.020000
 So although it does a lot of the same
 things, you have to learn how to

0:00:35.020000 --> 0:00:43.380000
 manipulate it in a way where you can
 get those specific things or those

0:00:43.380000 --> 0:00:50.380000
 actions out of them by using switches
 and command line data.

0:00:50.380000 --> 0:00:56.060000
 So what can you do with
 in capture packets?

0:00:56.060000 --> 0:00:57.720000
 You can display packets.

0:00:57.720000 --> 0:01:00.080000
 You can select different
 interfaces.

0:01:00.080000 --> 0:01:02.620000
 You can run statistics.

0:01:02.620000 --> 0:01:05.180000
 You can use profiles.

0:01:05.180000 --> 0:01:09.760000
 You can use a lot of the same things,
 although not everything that you

0:01:09.760000 --> 0:01:10.800000
 can do in a GUI.

0:01:10.800000 --> 0:01:16.060000
 But as mentioned earlier, in the Q
&A, there's a lot of things that are

0:01:16.060000 --> 0:01:19.540000
 very similar. You can
 merge capture files.

0:01:19.540000 --> 0:01:25.260000
 There's separate command line utilities
 for doing those specific functions.

0:01:25.260000 --> 0:01:32.920000
 However, it requires a basic knowledge
 of Linux and Unix command line

0:01:32.920000 --> 0:01:35.300000
 to be able to manipulate.

0:01:35.300000 --> 0:01:40.460000
 So some examples of important things
 that you should take note of.

0:01:40.460000 --> 0:01:45.680000
 You would need to be
 either a super user.

0:01:45.680000 --> 0:01:50.920000
 Preferably, we do not like to log in
 as root on a Unix or a Linux box,

0:01:50.920000 --> 0:01:56.660000
 but you would obviously have to have
 super user permissions to do certain

0:01:56.660000 --> 0:02:05.340000
 functions. So you may have to modify
 some files to be able to use T-Shark

0:02:05.340000 --> 0:02:07.800000
 in all its functionality.

0:02:07.800000 --> 0:02:14.700000
 You have to remember that with Unix
 and Linux, there's a lot of upper

0:02:14.700000 --> 0:02:19.000000
 case, lower case settings, things
 that you would type in.

0:02:19.000000 --> 0:02:23.240000
 And with Unix and Linux, it's
 primarily case sensitive.

0:02:23.240000 --> 0:02:25.440000
 So you have to be aware of that.

0:02:25.440000 --> 0:02:33.740000
 To navigate the command line or the
 shell in Unix, you have to be aware

0:02:33.740000 --> 0:02:40.680000
 of setting the shell and being aware
 of how that's going to output.

0:02:40.680000 --> 0:02:46.020000
 If you wanted to modify files, sometimes
 you would use the Vi editor as

0:02:46.020000 --> 0:02:50.860000
 an example. So there's some Unix and
 Linux basics that you're going to

0:02:50.860000 --> 0:02:52.540000
 have to be able to use this.

0:02:52.540000 --> 0:02:58.040000
 Otherwise, a good way to learn as I
 have up on the screen now is you can

0:02:58.040000 --> 0:02:59.960000
 download VMware.

0:02:59.960000 --> 0:03:08.160000
 You can get any of many different distributions
 of Linux to load up and

0:03:08.160000 --> 0:03:15.940000
 to test with. It's you're going to
 set up a Linux machine to do packet

0:03:15.940000 --> 0:03:18.260000
 capture that it's not on a VM.

0:03:18.260000 --> 0:03:20.580000
 This is just for instructional
 purposes.

0:03:20.580000 --> 0:03:24.300000
 You'd want it on the base machine interacts
 directly with your NIC instead

0:03:24.300000 --> 0:03:27.040000
 of the the the VNIC.

0:03:27.040000 --> 0:03:31.880000
 So although this is helpful, it's only
 really looking and analyzing stuff

0:03:31.880000 --> 0:03:33.600000
 on the host machine right now.

0:03:33.600000 --> 0:03:35.860000
 So it's limited.

0:03:35.860000 --> 0:03:40.980000
 But if you're going to really do this
 and install Linux on a machine to

0:03:40.980000 --> 0:03:46.040000
 use in the field to do protocol packet
 network analysis, you can install

0:03:46.040000 --> 0:03:49.140000
 that directly to the host machine.


0:03:49.140000 --> 0:03:57.060000
 That being said, you can basically also
 load the wire shark GUI on Linux.

0:03:57.060000 --> 0:04:03.300000
 So whatever you weren't using T-Shark
 for, anything that you wanted to

0:04:03.300000 --> 0:04:06.500000
 use in the GUI, generally
 it's also loaded.

0:04:06.500000 --> 0:04:10.800000
 Also, when you install wire shark, you
 have the options to put it in or

0:04:10.800000 --> 0:04:14.520000
 take it out. So just be aware that
 when you did install it, hopefully

0:04:14.520000 --> 0:04:17.240000
 you chose everything and
 it's already there.

0:04:17.240000 --> 0:04:20.780000
 If not, you may need to add it.

0:04:20.780000 --> 0:04:29.860000
 So as we mentioned earlier, T-Shark is
 capable of running a packet capture

0:04:29.860000 --> 0:04:35.620000
 on your system. It
 is customizable.

0:04:35.620000 --> 0:04:40.920000
 We talked about in Q&A, there's different
 things that you can do with

0:04:40.920000 --> 0:04:49.360000
 it. There's a man page if you are familiar
 with Linux, Unix-ish man pages,

0:04:49.360000 --> 0:04:54.740000
 you can type man m-a-n space T-Shark
 and it will give you many of the

0:04:54.740000 --> 0:04:56.620000
 option settings that you need.

0:04:56.620000 --> 0:05:00.320000
 You can do that with EddyCap,
 MergeCap, the rest as well.

0:05:00.320000 --> 0:05:04.440000
 Basically, they're just executables
 that you're trying, or I should say

0:05:04.440000 --> 0:05:09.120000
 binaries, that you're trying to figure
 out switches for or arguments so

0:05:09.120000 --> 0:05:14.800000
 that you can customize the string and
 pull exactly what it is that you

0:05:14.800000 --> 0:05:17.240000
 need from T-Shark.

0:05:17.240000 --> 0:05:22.980000
 And how do you use it?

0:05:22.980000 --> 0:05:28.280000
 Obviously, you would need some basic
 Unix and Linux systems administration

0:05:28.280000 --> 0:05:33.200000
 skills. I already went over basically
 what they need to be.

0:05:33.200000 --> 0:05:36.560000
 It's not impossible to do.

0:05:36.560000 --> 0:05:43.080000
 Most of you, if you're using Cisco devices,
 Linux is fairly easy because

0:05:43.080000 --> 0:05:46.460000
 you're used to manipulating
 the command line.

0:05:46.460000 --> 0:05:50.500000
 There's also, obviously, if you're using
 Bash or some kind of shell, it's

0:05:50.500000 --> 0:05:52.280000
 a GUI-like window.

0:05:52.280000 --> 0:05:56.580000
 So between the two, it's
 very simple to use.

0:05:56.580000 --> 0:06:00.980000
 Just make sure that when you install
 it, you follow the same criteria

0:06:00.980000 --> 0:06:03.860000
 of adding the things
 that you need.

0:06:03.860000 --> 0:06:07.620000
 You have the proper systems requirements,
 which you can find on wireshark

0:06:07.620000 --> 0:06:14.760000
.org. You have permissions to install,
 which generally and configure the

0:06:14.760000 --> 0:06:20.160000
 wireshark installation and configuration
 files, which would require something

0:06:20.160000 --> 0:06:23.160000
 other than a user privilege.

0:06:23.160000 --> 0:06:27.200000
 And as we noted before, you're going
 to be running this from the terminal

0:06:27.200000 --> 0:06:30.580000
 window, T-Shark Terminal.

0:06:30.580000 --> 0:06:35.940000
 And you should learn how to use the
 man pages, which is basically your

0:06:35.940000 --> 0:06:44.000000
 view into help files, if you will, as
 if you were going to type a question

0:06:44.000000 --> 0:06:50.020000
 mark and a command prompt in Cisco,
 where you were trying to figure out

0:06:50.020000 --> 0:06:52.360000
 more information.

0:06:52.360000 --> 0:06:56.920000
 Man pages are generally where you can
 find many of these different switches

0:06:56.920000 --> 0:07:00.140000
 and so on and so forth.

0:07:00.140000 --> 0:07:06.320000
 So there's been a lot of questions about
 the Nexus and its packet capture

0:07:06.320000 --> 0:07:12.740000
 capabilities. So you have the ETH Analyzer,
 you have the ability to capture

0:07:12.740000 --> 0:07:18.400000
 packets and get them into a device
 such as wireshark to analyze.

0:07:18.400000 --> 0:07:22.920000
 I believe the question was, is T-Shark
 directly on the Nexus platform?

0:07:22.920000 --> 0:07:24.200000
 I do not believe so.

0:07:24.200000 --> 0:07:29.280000
 I believe that it is not T
-Shark, it is ETH Analyzer.

0:07:29.280000 --> 0:07:35.700000
 Just as it may have the same functionality,
 but it's named different.

0:07:35.700000 --> 0:07:38.580000
 So I do not believe that
 it is called T-Shark.

0:07:38.580000 --> 0:07:41.000000
 So I hope that answers
 that question.

0:07:41.000000 --> 0:07:42.920000
 But they can be used.

0:07:42.920000 --> 0:07:48.780000
 Together you can take the data and
 you can use it in wire shark.

0:07:48.780000 --> 0:07:54.200000
 So we will talk about that in the last
 two modules, I believe, is file

0:07:54.200000 --> 0:07:59.020000
 formats. And that's why file formats
 is so important because with file

0:07:59.020000 --> 0:08:03.240000
 formats, you're going to be moving
 the data around and opening it and

0:08:03.240000 --> 0:08:07.740000
 other things. And if you do not have
 it in the correct format, then you

0:08:07.740000 --> 0:08:12.040000
 either may not open it or you may lose
 data, such as we mentioned when

0:08:12.040000 --> 0:08:13.320000
 we were talking about time stamps.


0:08:13.320000 --> 0:08:18.560000
 You can put it from one to the other and
 it will lose, for example, nanoseconds.

0:08:18.560000 --> 0:08:25.460000
 If the other analyzer you opened
 it in does not allow for that.

0:08:25.460000 --> 0:08:29.580000
 Hope I answered that question.

0:08:29.580000 --> 0:08:34.080000
 Let's see what else we have.

0:08:34.080000 --> 0:08:42.060000
 Launching T-Shark,
 multiple T-Sharks.

0:08:42.060000 --> 0:08:47.560000
 So you can open up T-Shark, multiple
 instances of T-Shark, yes, and you

0:08:47.560000 --> 0:08:50.680000
 can use it to capture
 different things, yes.

0:08:50.680000 --> 0:08:58.760000
 So as an example of hiding it on the
 system as a background process, yes.

0:08:58.760000 --> 0:09:12.120000
 Let's see what else.

0:09:12.120000 --> 0:09:20.000000
 And as far as trying to determine packet
 loss, yes, if you did Wireshark

0:09:20.000000 --> 0:09:25.420000
 or T-Shark on one close to the source
 or on the source or close to the

0:09:25.420000 --> 0:09:29.120000
 destination or on the destination and
 you ran the same statistics that

0:09:29.120000 --> 0:09:34.060000
 we did when we looked at the GUI version
 of Wireshark, you can then determine

0:09:34.060000 --> 0:09:38.060000
 the same types of things, which
 would be the round trip.

0:09:38.060000 --> 0:09:45.100000
 Packet loss could be determined by
 many things but Wireshark and or T

0:09:45.100000 --> 0:09:47.180000
-Shark can help you come
 to that conclusion.

