1
00:00:00,000 --> 00:00:07,963



2
00:00:07,963 --> 00:00:13,714
Ok, for our next module, we will be 
talking about capturing IP resolution.

3
00:00:13,714 --> 00:00:18,995
And when we discuss capturing IP resolution,
what we're saying is

4
00:00:18,995 --> 00:00:26,689
how does the basics of ARPing work
and how does that look in Wireshark,

5
00:00:26,689 --> 00:00:32,245
and what can we do to find out or troubleshoot
these types of problems with Wireshark.

6
00:00:32,242 --> 00:00:40,529
And Wireshark will capture the basics
 and show you, however, some underlying

7
00:00:40,528 --> 00:00:43,376
information about ARP is necessary so that

8
00:00:43,370 --> 00:00:46,266
you understand what you are looking at and why.

9
00:00:46,273 --> 00:00:51,174
So, what is IP resolution and what does ARP do?

10
00:00:51,174 --> 00:00:55,321
Well essentially, computer systems operate on networks.

11
00:00:55,321 --> 00:00:59,779
And for them to communicate, 
they need to be uniquely identified

12
00:00:59,771 --> 00:01:03,359
and we generally do that with a IP address.

13
00:01:03,359 --> 00:01:11,038
So, how does ARP tie in is that 
if you're going to request

14
00:01:11,038 --> 00:01:13,630
to go somewhere in a network and 
you don't know what it is,

15
00:01:13,630 --> 00:01:19,990
ARP or address resolution protocol
is the protocol that is going to try to help you

16
00:01:19,990 --> 00:01:21,990
find what that information is.

17
00:01:21,990 --> 00:01:27,498
So when you configure IP on a source host,

18
00:01:27,498 --> 00:01:32,705
an IP on a destination host, 
ultimately the data would need to be sent

19
00:01:32,705 --> 00:01:36,492
from that one IP to the other and we need to route there.

20
00:01:36,501 --> 00:01:41,862
And if it's a remote segment, it's going to need 
to traverse the network multiple hops.

21
00:01:41,862 --> 00:01:45,626
This is obviously handled through 
the routing table and so on.

22
00:01:45,626 --> 00:01:53,090
But locally, these IP packets ultimately
resolve to the MAC address configured

23
00:01:53,090 --> 00:01:55,467
on your machine. And this is the unique address.

24
00:01:55,467 --> 00:02:00,768
And if you look at it from an entire
source to destination concept,

25
00:02:00,768 --> 00:02:03,910
it's really going from your machine address

26
00:02:03,910 --> 00:02:08,215
all the way through the network using
all different types of protocols,

27
00:02:08,215 --> 00:02:12,557
IP addresses, going through route tables,

28
00:02:12,557 --> 00:02:17,845
using ports and so on and so forth
to ultimately get to the target -

29
00:02:17,845 --> 00:02:22,365
MAC address and that is also 
called the burn in address.

30
00:02:22,365 --> 00:02:31,683
So the IP, the IP resolution will take place
when the address resolution protocol,

31
00:02:31,676 --> 00:02:35,430
ARP maps that layer to data link layer,

32
00:02:35,452 --> 00:02:38,261
hardware address to the IP address.

33
00:02:38,285 --> 00:02:42,867
So, when we troubleshoot this with

34
00:02:42,867 --> 00:02:44,754
Wireshark, what are we actually seeing?

35
00:02:44,754 --> 00:02:48,501
So, we can capture that resolution process

36
00:02:48,501 --> 00:02:58,624
pretty quickly and easily just by running 
a simple query, which we'll look at now.

37
00:02:58,624 --> 00:03:03,231
So basically, what we did was
we just ran a generic capture.

38
00:03:03,231 --> 00:03:06,796
And now we want to filter for ARP
and take a look at what's going on here.

39
00:03:06,796 --> 00:03:09,569
So if we look at the ARP packets,

40
00:03:09,569 --> 00:03:15,097
we see that there's an IP address asking
here, for some information.

41
00:03:15,108 --> 00:03:20,580
So we have a sender MAC address
and the IP address

42
00:03:20,586 --> 00:03:24,801
looking for a target and it's trying 
to resolve that information.

43
00:03:24,801 --> 00:03:29,872
So this a simple view of what ARP, 
ARP is essentially doing

44
00:03:29,861 --> 00:03:34,921
and you can see your source and destination
which is your hardware addresses.

45
00:03:34,921 --> 00:03:39,807
And what's in the packet is, 
it's looking for the IP information

46
00:03:39,807 --> 00:03:41,807
so that it can resolve that information.

47
00:03:41,807 --> 00:03:45,534
So that's essentially what we mean by IP resolution.

48
00:03:45,534 --> 00:03:47,534
What can we find?

49
00:03:47,534 --> 00:03:54,761
With this we can see issues with the, 
table instability can be an issue.

50
00:03:54,761 --> 00:03:59,792
If you just run a simple ARP on your local machine,

51
00:03:59,789 --> 00:04:03,433
you could see the ARP cache, it may be corrupted.

52
00:04:03,433 --> 00:04:07,734
It may have incorrect entries.
You may have, for example,

53
00:04:07,735 --> 00:04:12,426
on a switch's memory, you may have things 
that have changed on the network.

54
00:04:12,426 --> 00:04:16,268
It hasn't timed out or refreshed in the, in the cache.

55
00:04:16,268 --> 00:04:20,303
So essentially, as network engineers,
a lot of times what we can do,

56
00:04:20,303 --> 00:04:23,793
is if we have a high time out on cache,
we can come in

57
00:04:23,793 --> 00:04:27,513
and we can log into the device
and clear the ARP table.

58
00:04:27,513 --> 00:04:33,557
Or clear the MAC address table.
It's a completely kick-off the process again

59
00:04:33,557 --> 00:04:39,245
which will essentially set up the ARP's
to go out and try to resolve

60
00:04:39,259 --> 00:04:43,631
the IP addresses again as the queries come in.

61
00:04:43,631 --> 00:04:48,719
You have ARP spoofing to send data 
from one machine to another.

62
00:04:48,719 --> 00:04:51,971
That was unintended, you can spoof that.

63
00:04:51,971 --> 00:04:54,363
So, there's a lot of reasons why

64
00:04:54,363 --> 00:05:00,422
capturing ARP could benefit you as a 
network engineer or network analyst because

65
00:05:00,422 --> 00:05:04,349
you could find problems with broadcast storms.

66
00:05:04,349 --> 00:05:06,349
Maybe there's a chattering NIC.

67
00:05:06,367 --> 00:05:11,481
Again, maybe you have some table instability
and you see constant requests.

68
00:05:11,481 --> 00:05:16,402
Maybe something hasn't timed out and 
that's why you can't resolve the IP address

69
00:05:16,402 --> 00:05:21,193
'cause it might have a different one assigned
at that moment.

70
00:05:21,192 --> 00:05:27,077
Something may be spoofed so at the, 
at the layer of security

71
00:05:27,077 --> 00:05:30,827
you may be able to capture that data
and see the spoofing attempts.

72
00:05:30,827 --> 00:05:33,746
So as you could see there's, 
there's quite a few reasons 

73
00:05:33,746 --> 00:05:37,754
why you would want to capture this data and review it.

74
00:05:37,754 --> 00:05:39,958
So what's really happening?

75
00:05:39,958 --> 00:05:47,715
When ARP functions, it allows TCP/IP 
to resolve to hardware addresses,

76
00:05:47,713 --> 00:05:51,103
the IP to resolve to IP addresses.

77
00:05:51,103 --> 00:05:54,059
Reversed ARP or RARP is the opposite.

78
00:05:54,059 --> 00:05:58,505
It's allowing the hardware to resolve the other way.

79
00:05:58,505 --> 00:06:04,328
Adn essentially, when you set up a lag
LAN segment for the first time,

80
00:06:04,331 --> 00:06:09,916
nothing is known. The devices are boot up.
They boot up and then they want to talk 

81
00:06:09,932 --> 00:06:15,697
to other devices on the network so it has to do 
this resolution process to start 

82
00:06:15,697 --> 00:06:18,455
communicating with other devices.

83
00:06:18,455 --> 00:06:21,346
So essentially, what's going to happen there

84
00:06:21,346 --> 00:06:26,851
is that the switch is going to learn this 
and keep them in the CAM table.

85
00:06:26,851 --> 00:06:30,390
And allow you to go from one port to the other.

86
00:06:30,390 --> 00:06:32,761
If not, it's going to broadcast at all ports.

87
00:06:32,761 --> 00:06:36,656
But essentially, this process starts off with 

88
00:06:36,656 --> 00:06:40,515
nobody knowing anything and 
having to do this process to learn.

89
00:06:40,523 --> 00:06:43,597
So, as you could see on the diagram,

90
00:06:43,597 --> 00:06:45,666
the ARP request is the first function

91
00:06:45,666 --> 00:06:48,731
then the device tries to find the hardware address

92
00:06:48,731 --> 00:06:52,034
for a node based on the IP address it knows.

93
00:06:52,034 --> 00:06:54,034
If you're going to go to a website,

94
00:06:54,034 --> 00:06:58,313
basically that, even if it's a DNS name,
it's going to resolve to an IP address

95
00:06:58,300 --> 00:07:02,710
which essentially is going to allow you
to go out on the network.

96
00:07:02,710 --> 00:07:04,710
You can communicate with it however,

97
00:07:04,719 --> 00:07:10,353
the request will go out if it doesn't know it,
that IP address is.

98
00:07:10,353 --> 00:07:14,186
And then the reply, the correct device will respond,

99
00:07:14,186 --> 00:07:17,690
with the, the needed hardware address.

100
00:07:17,690 --> 00:07:21,586
So essentially, that is what you are seeing 
when you look at the capture.

101
00:07:21,585 --> 00:07:26,990
You're seeing this process of requests 
and replies going back and forth.

102
00:07:26,990 --> 00:07:31,877
You know, I need to get to something, 
I need to know how to get there.

103
00:07:31,877 --> 00:07:35,703
Ok well, this is how you get there.
You need to know this address.

104
00:07:35,703 --> 00:07:42,111
So, at it's most fundamental layer,
that's what ARP is doing.

105
00:07:42,111 --> 00:07:50,150
So again, ARP fundamental,
fundamentally will resolve an IP to a MAC.

106
00:07:50,150 --> 00:07:54,268
Remember, the RARP will do the, the opposite.

107
00:07:54,268 --> 00:07:59,454
It's broadcast based so that's where
 these storms come into place.

108
00:07:59,454 --> 00:08:03,511
If you have a problem, broken or damaged or

109
00:08:03,511 --> 00:08:06,134
incorrectly working hardware on your network,

110
00:08:06,134 --> 00:08:08,845
it could generate a storm scenario,

111
00:08:08,845 --> 00:08:10,845
where it just constantly sends the data out.

112
00:08:10,845 --> 00:08:16,297
Quickly and easily captured by Wireshark, 
you span a port, you check it out,

113
00:08:16,291 --> 00:08:21,152
you see all these back and forth storm,
storm-like activity with ARP.

114
00:08:21,140 --> 00:08:25,601
Very quickly figure out that you have 
some kind of problem

115
00:08:25,601 --> 00:08:29,244
and then you could try to map it back down
to the MAC address.

116
00:08:29,244 --> 00:08:31,783
Maybe you can get into the switch
if it's not overwhelmed

117
00:08:31,783 --> 00:08:36,424
and see what port that MAC address
is mapped to.

118
00:08:36,441 --> 00:08:39,131
Maybe shut the port or unplug the cable,

119
00:08:39,137 --> 00:08:42,928
and get that machine off the network, as an example.

120
00:08:42,928 --> 00:08:47,654
Possible issues, stickiness 
when you're using port security.

121
00:08:47,654 --> 00:08:51,010
That could be something that, 
that creates an issue.

122
00:08:51,010 --> 00:08:55,255
Storms, chattering NIC cards, spoofing,

123
00:08:55,255 --> 00:08:59,265
proxy ARP could be an issue.

124
00:08:59,265 --> 00:09:05,343
And as we mentioned before,
cache issues where something is known,

125
00:09:05,351 --> 00:09:07,680
the time out didn't expire yet,

126
00:09:07,680 --> 00:09:13,796
and you need to either refresh or release that 
information so that it can broadcast back out

127
00:09:13,795 --> 00:09:15,672
and build that information back up.

128
00:09:15,672 --> 00:09:21,463
This way that you can get your devices 
functioning on the network again.

129
00:09:21,463 --> 00:09:27,260
And lastly, we showed it on Wireshark 
just previously.

130
00:09:27,260 --> 00:09:29,683
But as you could see from the diagram,

131
00:09:29,683 --> 00:09:38,009
very simply, this is what a ARP request reply
looks like at it's most basic format.

132
00:09:38,009 --> 00:09:44,706
