1
00:00:00,000 --> 00:00:07,774


2
00:00:07,774 --> 00:00:10,830
Ok, welcome back. In our next segment

3
00:00:10,830 --> 00:00:18,364
we will talk about analyzing poor voice quality.

4
00:00:18,364 --> 00:00:22,014
So what consitutes poor quality?

5
00:00:22,014 --> 00:00:27,404
Very simply, if you pick up the phone and you hear

6
00:00:27,401 --> 00:00:33,041
be very teeny or hollow or you hear static,

7
00:00:33,041 --> 00:00:36,320
or you hear anything other than a clear, crisp

8
00:00:36,320 --> 00:00:41,327
quality phone call, 
then that would constitute poor quality.

9
00:00:41,327 --> 00:00:47,973
As we've mentioned earlier, your data network 
needs to be pristine.

10
00:00:47,973 --> 00:00:52,131
And quite frankly, when you have issues with voice,

11
00:00:52,131 --> 00:00:56,665
a lot of times, the knee jerk reaction is 

12
00:00:56,665 --> 00:01:03,878
to start looking into possible issues with the 
voice configurations in the voice system.

13
00:01:03,892 --> 00:01:08,003
But in reality, the data network also plays very closely.

14
00:01:08,003 --> 00:01:11,401
So, I can give you an example with a port mismatch

15
00:01:11,401 --> 00:01:15,407
from a phone hanging off a PC, 
a PC hanging off a phone,

16
00:01:15,407 --> 00:01:19,384
an incorrect speed and duplex settings.

17
00:01:19,384 --> 00:01:25,534
Something as simple as that is going to cause 
you a tremendous issue with quality

18
00:01:25,534 --> 00:01:32,372
and you would have to correct that 
network data link layer issue

19
00:01:32,370 --> 00:01:36,566
instead of going and starting to mess 
with QoS and all that other stuff

20
00:01:36,566 --> 00:01:42,959
where really the underlying problem causing 
the poor quality was in fact the data network.

21
00:01:42,959 --> 00:01:47,349
So just remember that when 
you're troubleshooting this stuff

22
00:01:47,356 --> 00:01:51,904
that you're going to be looking not only 
at the voice but also at the data network.

23
00:01:51,904 --> 00:01:56,858
And how can Wireshark help?
Well, it can analyze the flow of calls

24
00:01:56,858 --> 00:02:01,286
which we will look at specifically.
We can look at the voice calls.

25
00:02:01,286 --> 00:02:06,560
We can reconstruct them in the player and
we can take a look and see what's going on.

26
00:02:06,560 --> 00:02:11,929
So, that being said, you will also be able 
to analyze the response time

27
00:02:11,929 --> 00:02:16,558
in the packets list or the flow graph
 and use the Expert to really

28
00:02:16,558 --> 00:02:19,344
get an understanding of what could be happening here.

29
00:02:19,344 --> 00:02:24,241
An example, or another example is
you may have hair-pinning on a network device.

30
00:02:24,241 --> 00:02:29,920
This may cause voice to only work 
in a, in a certain direction correctly.

31
00:02:29,920 --> 00:02:35,814
Incorrectly configured QoS causing queuing issues,

32
00:02:35,814 --> 00:02:40,022
that can also play a large role into quality.

33
00:02:40,022 --> 00:02:48,016
Not giving yourself enough of a buffer for voice 
or prioritizing it incorrectly.

34
00:02:48,012 --> 00:02:55,683
You can experience jitter which comes down to,
you can have latency in your network.

35
00:02:55,683 --> 00:03:06,807
That will cause extreme poor quality and you 
can also see issues with packets being dropped.

36
00:03:06,807 --> 00:03:13,648
And if packets are being dropped or 
re-transmitted, that can also cause poor quality.

37
00:03:13,648 --> 00:03:19,397
And what's really good is that Wireshark
once you place correctly and capture the data

38
00:03:19,397 --> 00:03:24,566
will start to give you some insight into 
what you can see.

39
00:03:24,566 --> 00:03:34,013
So up on the screen we have the call
and to get to that we go to the 

40
00:03:34,002 --> 00:03:38,162
telephony menu and we pull voice calls 
or I should say, VOIP calls.

41
00:03:38,162 --> 00:03:43,068
And if we want to take a look,
we can pull up the player

42
00:03:43,068 --> 00:03:46,379
and decode it and then we can see specifically

43
00:03:46,379 --> 00:03:49,870
what exactly was taking place during this call.

44
00:03:49,870 --> 00:03:51,870
Now, why is this helpful?

45
00:03:51,870 --> 00:03:58,911
For those of you that are familiar with 
audio concepts, this looks very much like as if

46
00:03:58,919 --> 00:04:02,505
you were recording something in pro-tools 
or a tool of that nature.

47
00:04:02,497 --> 00:04:07,961
It's essentially the same thing and when 
you look at it, it will tell you over time

48
00:04:07,963 --> 00:04:13,004
exactly what was taking place 
and, and the quality of the calls. 

49
00:04:13,012 --> 00:04:17,364
So obviously, if it's a smaller wave, 
it's more quiet or less,

50
00:04:17,364 --> 00:04:21,678
and if it's a bigger wave, it's louder or more.

51
00:04:21,678 --> 00:04:24,472
And then you could also suffer from similar things 

52
00:04:24,472 --> 00:04:30,072
like if you are clipping or you have distortion,
you have enough space or head room.

53
00:04:30,072 --> 00:04:32,922
But a lot of these things come into play 

54
00:04:32,922 --> 00:04:37,169
when you pull up the RTP player 
and you can view these problems.

55
00:04:37,194 --> 00:04:39,531
So, that being said,

56
00:04:39,539 --> 00:04:45,681
just be aware if you're using this player, 
it's also a security concern.

57
00:04:45,686 --> 00:04:48,813
You can, yes, replay calls that you've captured

58
00:04:48,812 --> 00:04:55,369
which is probably a concern of those 
who were using the network.

59
00:04:55,369 --> 00:05:00,219
So just be aware that you have to consider 
security here as well,

60
00:05:00,225 --> 00:05:08,328
because this will be a violation of security
if you open up someone's call and listen to it.

61
00:05:08,328 --> 00:05:12,184
So Wireshark, once you captured the data

62
00:05:12,184 --> 00:05:17,175
and then you start putting it into the tools
in the telephony menu, such as VOIP calls

63
00:05:17,175 --> 00:05:20,661
will allow you to see the quality of the call.

64
00:05:20,661 --> 00:05:24,902
You'll be able to see some issues with it.
You can open up the flow graph.

65
00:05:24,911 --> 00:05:27,762
And you could see if packets are being re-transmitted

66
00:05:27,761 --> 00:05:31,948
or if your underlying protocols are having an issue.

67
00:05:31,948 --> 00:05:37,110
And also with RTP, you can check for,

68
00:05:37,110 --> 00:05:40,964
you could do stream analysis and 
you could check for out-of-order packets,

69
00:05:40,964 --> 00:05:46,553
or any other issues that are happening with 
RTP while you're doing your analysis.

70
00:05:46,553 --> 00:05:50,115
And you could look at the RTP stream analysis,

71
00:05:50,115 --> 00:05:52,954
both in forward and reversed direction

72
00:05:52,954 --> 00:05:55,720
and see specifically how many packets,

73
00:05:55,720 --> 00:05:58,884
what the delta is in between the packets,

74
00:05:58,884 --> 00:06:03,313
if you're experiencing jitter, and so on and so forth.

75
00:06:03,313 --> 00:06:07,378
So this could be really helpful 
and it also provides the summary

76
00:06:07,378 --> 00:06:13,779
for you to give you the max amount of jitter
experienced during the call as an example,

77
00:06:13,776 --> 00:06:18,711
and the duration of the call, as well as the max delta.

78
00:06:18,711 --> 00:06:23,893
