1
00:00:00,000 --> 00:00:08,013


2
00:00:08,013 --> 00:00:11,999
Ok, in our next segment,
we will discuss common problems

3
00:00:11,999 --> 00:00:15,238
such as incorrectly configured SSID,

4
00:00:15,238 --> 00:00:19,643
and look at some other tools that 
you can use within Wireshark

5
00:00:19,643 --> 00:00:23,476
to help troubleshoot wireless related issues.

6
00:00:23,476 --> 00:00:30,081
So as we discusse earlier, an SSID or 
service set identifier or identification

7
00:00:30,081 --> 00:00:36,476
is used to associate you to
a particular wireless network.

8
00:00:36,476 --> 00:00:40,707
It is generally broadcasted in a certain area

9
00:00:40,707 --> 00:00:45,968
so that you can see it and join.
Again, sometimes it's hidden from you,

10
00:00:45,968 --> 00:00:49,494
in cases where people want to keep it private.

11
00:00:49,494 --> 00:00:56,036
But you can then connect to it and it'll allow you 
to join an AP or an access point

12
00:00:56,036 --> 00:01:01,457
which constitutes a basic service set or BSS.

13
00:01:01,457 --> 00:01:07,493
Once you're associated, you can then 
authenticate, join the network and participate.

14
00:01:07,493 --> 00:01:10,997
All that comes from the SSID.

15
00:01:10,997 --> 00:01:16,431
So there are time where you will try
 to connect to the network,

16
00:01:16,424 --> 00:01:21,723
and you will not be able to do so
and there are quite a few reasons for that.

17
00:01:21,723 --> 00:01:26,735
Essentially, if you don't know the SSID
and it's hidden from you 

18
00:01:26,740 --> 00:01:30,041
then you're going to have to find a way to find it.

19
00:01:30,041 --> 00:01:33,025
Otherwise, if you do see it, you cannot join.

20
00:01:33,025 --> 00:01:37,383
You're going to have other issues
that may be associated to it,

21
00:01:37,383 --> 00:01:42,561
such as if you associate but cannot authenticate or

22
00:01:42,561 --> 00:01:48,207
other reasons, authentication reasons 
may be that you're using TACAC's or RADIUS

23
00:01:48,207 --> 00:01:52,991
and your credentials are incorrect or
it's not allowing you to join.

24
00:01:52,991 --> 00:01:57,984
But as you can see, there's quite a few reasons 
why you would not be able to join

25
00:01:58,003 --> 00:02:03,588
and Wireshark will in fact give you 
the answers to what's going on.

26
00:02:03,588 --> 00:02:12,368
So, one of the tools that I want to use 
when digging into the capture,

27
00:02:12,355 --> 00:02:18,940
specifically is, we showed the I/O graph 
in a separate module but

28
00:02:18,940 --> 00:02:23,086
particularly, you can use and build an I/O graph

29
00:02:23,086 --> 00:02:28,456
to further dig into what's going on 
in your network by writing filters.

30
00:02:28,456 --> 00:02:32,878
So for example, here I wanted to see every 10 seconds

31
00:02:32,878 --> 00:02:38,638
what was going on based on the channel 
that I had selected

32
00:02:38,638 --> 00:02:42,214
and what wireless networks are out there.

33
00:02:42,203 --> 00:02:46,731
So as you could see, specifically I was able to 

34
00:02:46,731 --> 00:02:52,534
plot or map on the x and y axes,
some specific information based on

35
00:02:52,534 --> 00:02:55,637
what I was seeing as per the 2 gigahertz range.

36
00:02:55,637 --> 00:03:00,973
So there are some examples of tools
that can be further customized

37
00:03:00,972 --> 00:03:04,743
based on the technology in which you want to dig into

38
00:03:04,743 --> 00:03:10,927
to find some data that will give you a clue into,
for example,

39
00:03:10,935 --> 00:03:16,579
a radio transmission may have an issue 
and you may be able to find that with these tools

40
00:03:16,579 --> 00:03:20,221
based on the correct filters that you write.

41
00:03:20,221 --> 00:03:24,263
So, just a reminder, you have to turn this 
off and on, so if you want to

42
00:03:24,263 --> 00:03:27,880
view certain things, you have to enable them.

43
00:03:27,880 --> 00:03:33,462
Within the I/O graph, similarly what I just 
showed you in the live demonstration,

44
00:03:33,462 --> 00:03:38,711
you can write specific filters in 
and you can look at some, 

45
00:03:38,716 --> 00:03:42,290
some detailed information in the I/O graph.

46
00:03:42,301 --> 00:03:47,269
So as you dig deeper into the capture,
you can review the packets.

47
00:03:47,269 --> 00:03:49,234
You can look deeper into the frames.

48
00:03:49,234 --> 00:03:53,227
You can find some frame check 
sequence issues, channeling, 

49
00:03:53,243 --> 00:03:55,912
general association issues.

50
00:03:55,913 --> 00:04:03,591
And again, if you have incorrect information or
improper configurations on your wireless client,

51
00:04:03,591 --> 00:04:06,838
it's likely that you're not going to be able to join

52
00:04:06,838 --> 00:04:11,700
and within the capture, you're going to get
your clues as to what that could be.

53
00:04:11,700 --> 00:04:15,568
And the tools that you could use is 
the wireless LAN or 

54
00:04:15,568 --> 00:04:24,451
WLAN traffic tool, the I/O graph and 
you can drill into the capture window,

55
00:04:24,451 --> 00:04:30,007
capture window and apply filters to 
further find issues with excessive beaconing or 

56
00:04:30,007 --> 00:04:34,043
incorrect channels and so on.

57
00:04:34,043 --> 00:04:37,321
And as we showed earlier, there's also the other tool

58
00:04:37,321 --> 00:04:41,011
where you can go in and basically filter on

59
00:04:41,011 --> 00:04:45,780
any SSID that you see and further drill down into it.

60
00:04:45,780 --> 00:04:49,908
Or you can select it and you can look 
for  other issues related to it.

61
00:04:49,908 --> 00:04:57,635
However, just remember that this tool will only 
be available if you have captured wireless traffic.

62
00:04:57,635 --> 00:05:02,947
Otherwise, it will be grade out.
Otherwise, and you will not be able to use it.

63
00:05:02,947 --> 00:05:07,121
So just remember that when you're looking 
for problems in your wireless LAN network.

64
00:05:07,121 --> 00:05:12,372
You obviously have to be capturing 
some wireless traffic to be able to

65
00:05:12,372 --> 00:05:16,238
invoke the tools to be able to troubleshoot it.

66
00:05:16,238 --> 00:05:24,032
