1
00:00:02,520 --> 00:00:06,020
(electronic sound effect)

2
00:00:08,812 --> 00:00:10,845
- In this video, before
we go into the details

3
00:00:10,845 --> 00:00:14,855
of how to create a GNS3 virtual topology

4
00:00:14,855 --> 00:00:16,774
of routers and EtherSwitches.

5
00:00:16,774 --> 00:00:18,652
We need to preface that, by first,

6
00:00:18,652 --> 00:00:23,352
going over just some real
basic GNS3 terminology.

7
00:00:23,352 --> 00:00:24,727
As you can see from the title of this,

8
00:00:24,727 --> 00:00:26,416
we're gonna talk about
the differences between

9
00:00:26,416 --> 00:00:29,424
projects, topologies, and nodes.

10
00:00:29,424 --> 00:00:30,686
This'll be a real short video,

11
00:00:30,686 --> 00:00:33,968
but these things are critical
for you to understand.

12
00:00:33,968 --> 00:00:37,809
So, let's start by just opening up GNS3

13
00:00:37,809 --> 00:00:41,447
by double clicking on the icon here.

14
00:00:41,447 --> 00:00:44,900
And you'll see that the very
first thing it asks us to do,

15
00:00:44,900 --> 00:00:48,841
is to either create the
name of a brand new project

16
00:00:48,841 --> 00:00:50,447
that we're gonna start out with,

17
00:00:50,447 --> 00:00:52,780
or open an existing project.

18
00:00:53,678 --> 00:00:55,294
So that leads us to the question of,

19
00:00:55,294 --> 00:00:58,106
what exactly is a project?

20
00:00:58,106 --> 00:01:00,222
Okay, so to answer that, I've actually-

21
00:01:00,222 --> 00:01:02,780
I'm going go to ahead
and cancel out of here,

22
00:01:02,780 --> 00:01:04,389
and cancel out of here.

23
00:01:04,389 --> 00:01:07,889
And I've all ready created a GNS3 project,

24
00:01:09,231 --> 00:01:10,778
actually I'll go ahead and show you

25
00:01:10,778 --> 00:01:14,023
what that looks like within GNS3.

26
00:01:14,023 --> 00:01:17,154
So from here, I'm just
gonna go on Open a Project,

27
00:01:17,154 --> 00:01:20,228
and these are various project
folders that are here.

28
00:01:20,228 --> 00:01:21,952
I'll tell you what those
are in just a second,

29
00:01:21,952 --> 00:01:26,266
but let me just go ahead and
click on this EIGRP Project.

30
00:01:26,266 --> 00:01:28,435
So when you're opening
an existing project,

31
00:01:28,435 --> 00:01:30,446
you'll go into where
your projects are stored,

32
00:01:30,446 --> 00:01:33,840
and notice, at least in
this version of GNS3,

33
00:01:33,840 --> 00:01:37,011
projects, by default, are stored-

34
00:01:37,011 --> 00:01:38,086
Let me go back.

35
00:01:38,086 --> 00:01:39,669
Under your C drive,

36
00:01:40,664 --> 00:01:41,664
under Users,

37
00:01:43,665 --> 00:01:46,758
under the name of you, your user name,

38
00:01:46,758 --> 00:01:48,899
and then you'll see there's a GNS3 folder,

39
00:01:48,899 --> 00:01:50,672
and if you double click on that,

40
00:01:50,672 --> 00:01:53,880
you'll see a Projects folder.

41
00:01:53,880 --> 00:01:55,056
Double click on Projects,

42
00:01:55,056 --> 00:01:57,581
and that is where all of
your projects are stored.

43
00:01:57,581 --> 00:01:59,976
So, as you go about using GNS3

44
00:01:59,976 --> 00:02:04,230
to create your own labs for
BGP, OSPF, whatever it is,

45
00:02:04,230 --> 00:02:07,586
and you name those labs
whatever you want to name it,

46
00:02:07,586 --> 00:02:10,761
BGP, Santa Claus, Red Racing Car,

47
00:02:10,761 --> 00:02:13,067
whatever the name of your project is,

48
00:02:13,067 --> 00:02:16,126
it'll be stored here,
in your Projects folder.

49
00:02:16,126 --> 00:02:18,856
Once again, notice that it's your C drive,

50
00:02:18,856 --> 00:02:22,432
Users, your user name in your laptop,

51
00:02:22,432 --> 00:02:24,015
GNS3, and Projects.

52
00:02:25,528 --> 00:02:29,695
So, let me go ahead and open
up one of my existing projects.

53
00:02:31,283 --> 00:02:33,295
I'll click on the name of the project,

54
00:02:33,295 --> 00:02:36,572
and then I'll go to the
actual GNS3 project file,

55
00:02:36,572 --> 00:02:38,037
and I'm gonna talk about
that in just a second.

56
00:02:38,037 --> 00:02:40,865
So when I open that project
file, it opens this.

57
00:02:40,865 --> 00:02:43,437
A real simple project that
I created just this morning

58
00:02:43,437 --> 00:02:46,395
of three routers and an EtherSwitch,

59
00:02:46,395 --> 00:02:47,569
some basic stuff.

60
00:02:47,569 --> 00:02:52,282
Now, how did that project
file create all of this?

61
00:02:52,282 --> 00:02:54,099
In other words, what's
in that project file

62
00:02:54,099 --> 00:02:56,808
that remembered all of
this when I created it?

63
00:02:56,808 --> 00:03:00,253
So let me go ahead and
minimize this for a second,

64
00:03:00,253 --> 00:03:02,836
and bring up that project file.

65
00:03:04,074 --> 00:03:05,032
So here it is.

66
00:03:05,032 --> 00:03:07,017
I'll go ahead and double click on that.

67
00:03:07,017 --> 00:03:09,512
And you'll see that right
in the very high level

68
00:03:09,512 --> 00:03:10,584
you've got three things.

69
00:03:10,584 --> 00:03:13,196
You've got a screen shot,
which, you can open that up.

70
00:03:13,196 --> 00:03:14,342
It's just a PNG image.

71
00:03:14,342 --> 00:03:17,186
And that shows, it actually took,

72
00:03:17,186 --> 00:03:20,274
right after I saved the
project it took a screen shot

73
00:03:20,274 --> 00:03:23,161
of what the topology currently was.

74
00:03:23,161 --> 00:03:24,352
And this is nice, you can send this

75
00:03:24,352 --> 00:03:26,034
as an e-mail attachment to somebody

76
00:03:26,034 --> 00:03:28,534
if you want to show them
what you've created.

77
00:03:28,534 --> 00:03:30,674
It's just a PNG image.

78
00:03:30,674 --> 00:03:33,036
And then you've got your project files,

79
00:03:33,036 --> 00:03:35,084
and if I double click on that,

80
00:03:35,084 --> 00:03:36,642
it goes into Dynamips,

81
00:03:36,642 --> 00:03:39,131
and this is all the stuff
that Dynamips is using,

82
00:03:39,131 --> 00:03:41,058
and we don't have to
go into a lot of detail

83
00:03:41,058 --> 00:03:43,147
of what all this stuff is,

84
00:03:43,147 --> 00:03:44,358
but you'll also see in here,

85
00:03:44,358 --> 00:03:46,691
there are some config files.

86
00:03:47,559 --> 00:03:50,770
And so, when you issue a write memory,

87
00:03:50,770 --> 00:03:54,118
or a copy run start
command on your router-

88
00:03:54,118 --> 00:03:56,736
So I'm saying here, that
you've created a project,

89
00:03:56,736 --> 00:03:59,584
and you've been working
with it for an hour or so,

90
00:03:59,584 --> 00:04:01,060
and you're ready to leave it behind,

91
00:04:01,060 --> 00:04:02,598
you have to go off and do something else,

92
00:04:02,598 --> 00:04:05,032
but you might want to come
back to this in the future.

93
00:04:05,032 --> 00:04:07,397
So on every single router and
device you've got in there,

94
00:04:07,397 --> 00:04:10,655
you do copy run start or write mem.

95
00:04:10,655 --> 00:04:13,315
Well what that does,
is in this folder here,

96
00:04:13,315 --> 00:04:16,231
it creates what's called
a Startup Config file.

97
00:04:16,231 --> 00:04:18,936
And you can actually open
those up with a text editor,

98
00:04:18,936 --> 00:04:20,911
I'm gonna use NotePad+.

99
00:04:20,911 --> 00:04:22,411
And you can see here,

100
00:04:22,411 --> 00:04:24,360
I'll just make this a little bit bigger,

101
00:04:24,360 --> 00:04:28,942
this is the last known state
of your saved configuration.

102
00:04:28,942 --> 00:04:31,040
So that the next time
you open this project

103
00:04:31,040 --> 00:04:34,686
within GNS3, it'll go right
back to the state where it was.

104
00:04:34,686 --> 00:04:37,010
So that's where all
those config files are.

105
00:04:37,010 --> 00:04:38,693
And once again, that was located

106
00:04:38,693 --> 00:04:40,857
under your projects files here.

107
00:04:40,857 --> 00:04:44,492
So, I went to my users, GNS3 Projects,

108
00:04:44,492 --> 00:04:46,929
I double clicked on the
actual name of the project,

109
00:04:46,929 --> 00:04:48,507
and under Project Files

110
00:04:48,507 --> 00:04:50,913
is where all those configurations were.

111
00:04:50,913 --> 00:04:54,193
So these are your configuration files,

112
00:04:54,193 --> 00:04:55,435
all located in here.

113
00:04:55,435 --> 00:04:59,394
That's where your config files
are located, right there.

114
00:04:59,394 --> 00:05:01,932
So what is this thing
called a Project File?

115
00:05:01,932 --> 00:05:03,643
Well, you can also open that up,

116
00:05:03,643 --> 00:05:05,478
notice it's a GNS3 Project File,

117
00:05:05,478 --> 00:05:07,204
but you can right click on it,

118
00:05:07,204 --> 00:05:08,956
open it up with a text editor,

119
00:05:08,956 --> 00:05:12,215
once again, Notepad or Notepad+.

120
00:05:12,215 --> 00:05:15,761
And I'm not gonna go through
this in a lot of depth,

121
00:05:15,761 --> 00:05:17,872
but basically, what this file is,

122
00:05:17,872 --> 00:05:22,039
is this file gives GNS3
everything it needs to know about,

123
00:05:23,291 --> 00:05:25,418
"Okay, when I build this thing,

124
00:05:25,418 --> 00:05:26,891
where are the routers located?"

125
00:05:26,891 --> 00:05:29,759
For example, when I
show the user a square,

126
00:05:29,759 --> 00:05:33,304
a working area, is the router
gonna be in the upper left,

127
00:05:33,304 --> 00:05:34,212
in the lower left?

128
00:05:34,212 --> 00:05:36,476
Is it gonna be in the right
or somewhere in the middle?

129
00:05:36,476 --> 00:05:38,431
So that's one of the
things this file does,

130
00:05:38,431 --> 00:05:41,436
is it displays those router icons

131
00:05:41,436 --> 00:05:45,325
in the same locations as where
you dragged and dropped them

132
00:05:45,325 --> 00:05:46,860
when you saved the project file,

133
00:05:46,860 --> 00:05:48,765
so they're not just all willy-nilly.

134
00:05:48,765 --> 00:05:51,858
It also, in here, saves, you
know, how were they connected.

135
00:05:51,858 --> 00:05:53,789
Was router A connected to router B

136
00:05:53,789 --> 00:05:55,310
via a FastEthernet?

137
00:05:55,310 --> 00:05:57,334
Or via serial interface?

138
00:05:57,334 --> 00:05:59,901
If it was FastEthernet,
which FastEthernet?

139
00:05:59,901 --> 00:06:03,447
Was it FastEthernet 00, 0/1?

140
00:06:03,447 --> 00:06:06,223
So all of that is stored in here as well.

141
00:06:06,223 --> 00:06:08,055
It also stores information, like,

142
00:06:08,055 --> 00:06:09,495
what was the name of the device?

143
00:06:09,495 --> 00:06:11,213
You know, if you change
the name default name

144
00:06:11,213 --> 00:06:15,125
from Router 1 or San
Francisco, or to Fuzzy,

145
00:06:15,125 --> 00:06:16,932
or Bob or something,

146
00:06:16,932 --> 00:06:18,905
all of that is saved in here,

147
00:06:18,905 --> 00:06:20,140
so that when you open it up,

148
00:06:20,140 --> 00:06:23,504
those changes are also in effect.

149
00:06:23,504 --> 00:06:24,789
Other things like, you know,

150
00:06:24,789 --> 00:06:26,169
when you created the project,

151
00:06:26,169 --> 00:06:27,909
what kind of a router was it?

152
00:06:27,909 --> 00:06:29,518
Was it is a 3640?

153
00:06:29,518 --> 00:06:30,351
A 3725?

154
00:06:31,210 --> 00:06:32,758
Something else?

155
00:06:32,758 --> 00:06:34,905
Also, what IOS image was used?

156
00:06:34,905 --> 00:06:37,174
It stores the actual full IOS image

157
00:06:37,174 --> 00:06:39,418
that you used when you
created the project.

158
00:06:39,418 --> 00:06:41,879
So this GNS3 project file,

159
00:06:41,879 --> 00:06:44,542
pretty much the only thing it doesn't have

160
00:06:44,542 --> 00:06:47,445
are the configs, the start up config.

161
00:06:47,445 --> 00:06:50,439
But everything else is stored in here,

162
00:06:50,439 --> 00:06:52,832
so that GNS3 can recreate your project

163
00:06:52,832 --> 00:06:54,149
once you pull it up.

164
00:06:54,149 --> 00:06:56,177
So as I just scroll
through here a little bit,

165
00:06:56,177 --> 00:06:58,534
you can see it's got, you know,

166
00:06:58,534 --> 00:07:00,896
your X and Y coordinates
for this particular router,

167
00:07:00,896 --> 00:07:02,471
so it will place it on the screen

168
00:07:02,471 --> 00:07:04,089
exactly where it needs to go.

169
00:07:04,089 --> 00:07:07,212
It talks about a description about a link,

170
00:07:07,212 --> 00:07:08,218
what it's connected to.

171
00:07:08,218 --> 00:07:10,043
If I scroll down a little bit more,

172
00:07:10,043 --> 00:07:14,139
so you see, each one of
these is describing a device,

173
00:07:14,139 --> 00:07:16,459
node_id 2, well I don't know what that is,

174
00:07:16,459 --> 00:07:17,995
but GNS3 knows what that is.

175
00:07:17,995 --> 00:07:21,109
That's one particular
router or switch in there.

176
00:07:21,109 --> 00:07:22,611
And if I go further on down,

177
00:07:22,611 --> 00:07:25,120
so this is all just describing
where things show up

178
00:07:25,120 --> 00:07:28,173
in the picture, and how
they're all connected.

179
00:07:28,173 --> 00:07:31,244
So you notice how, right
here, gets all the adapters,

180
00:07:31,244 --> 00:07:34,607
their names, how GNS3 recognizes them.

181
00:07:34,607 --> 00:07:36,710
If I go down a little bit further,

182
00:07:36,710 --> 00:07:39,700
gives my idlepc value that was assigned.

183
00:07:39,700 --> 00:07:41,738
It also gives the name of the router,

184
00:07:41,738 --> 00:07:44,239
if I changed it from the
default name to something else.

185
00:07:44,239 --> 00:07:46,826
The platform, and it even goes down here

186
00:07:46,826 --> 00:07:48,021
a little bit further,

187
00:07:48,021 --> 00:07:49,915
and, yeah, right here, the image.

188
00:07:49,915 --> 00:07:51,254
It shows the image that was created.

189
00:07:51,254 --> 00:07:53,843
So this is your GNS3 project file,

190
00:07:53,843 --> 00:07:55,968
so when you are saving a project,

191
00:07:55,968 --> 00:07:58,523
just to recap, what exactly are you doing

192
00:07:58,523 --> 00:08:00,136
when you save a project?

193
00:08:00,136 --> 00:08:02,800
Well, whatever the name
of that project is,

194
00:08:02,800 --> 00:08:05,018
it creates a folder with that name,

195
00:08:05,018 --> 00:08:06,509
as you can see here.

196
00:08:06,509 --> 00:08:10,509
And within that folder,
it creates a screenshot,

197
00:08:11,515 --> 00:08:14,162
so it can display that
screenshot for you again.

198
00:08:14,162 --> 00:08:16,013
It creates a projects file,

199
00:08:16,013 --> 00:08:20,154
which has all of your config files in it,

200
00:08:20,154 --> 00:08:22,016
as well as also the state of memory,

201
00:08:22,016 --> 00:08:23,884
like you know, what was the
state of the routing table,

202
00:08:23,884 --> 00:08:25,329
what was the state of the ARP table,

203
00:08:25,329 --> 00:08:27,457
and all that good stuff.

204
00:08:27,457 --> 00:08:30,462
And then lastly, it has a projects file,

205
00:08:30,462 --> 00:08:32,591
and we talked about what that is.

206
00:08:32,591 --> 00:08:33,631
So I'm not quite done yet,

207
00:08:33,631 --> 00:08:34,897
but hopefully at this point,

208
00:08:34,897 --> 00:08:37,616
you understand the difference
between a config file

209
00:08:37,616 --> 00:08:41,238
and a project file from
the standpoint of GNS3.

210
00:08:41,238 --> 00:08:44,515
Right? The project file is
everything but the configs.

211
00:08:44,515 --> 00:08:48,108
The project file is how GNS
pieces everything together.

212
00:08:48,108 --> 00:08:49,891
The config file, like we talked about,

213
00:08:49,891 --> 00:08:51,095
is, just like it sounds,

214
00:08:51,095 --> 00:08:53,198
it's the last state of your configs

215
00:08:53,198 --> 00:08:54,856
when you did a write memory.

216
00:08:54,856 --> 00:08:56,683
Now, keep this in mind,

217
00:08:56,683 --> 00:08:58,888
if you close your GNS3 project,

218
00:08:58,888 --> 00:09:00,734
if you're done, and you walk away from it,

219
00:09:00,734 --> 00:09:02,594
and you close it all up.

220
00:09:02,594 --> 00:09:05,698
Anything that was not saved is gone.

221
00:09:05,698 --> 00:09:07,188
It's just like a real router. Right?

222
00:09:07,188 --> 00:09:08,878
In a real Cisco IOS router,

223
00:09:08,878 --> 00:09:11,429
if you power that router off,

224
00:09:11,429 --> 00:09:13,449
anything that was in your
running configuration

225
00:09:13,449 --> 00:09:17,762
that was not saved to your
start up configuration is lost.

226
00:09:17,762 --> 00:09:19,350
Same thing here with GNS3.

227
00:09:19,350 --> 00:09:21,207
It does not save a copy of what

228
00:09:21,207 --> 00:09:24,208
your last running configuration was.

229
00:09:24,208 --> 00:09:27,532
It only saves what your last
start up configuration was.

230
00:09:27,532 --> 00:09:30,334
So make sure you save your
configs with write mem

231
00:09:30,334 --> 00:09:33,630
or copy run start before you
turn off all your routers,

232
00:09:33,630 --> 00:09:36,690
and shut down the GNS3 application.

233
00:09:36,690 --> 00:09:38,298
One other thing I wanted to talk about,

234
00:09:38,298 --> 00:09:39,732
just one other term.

235
00:09:39,732 --> 00:09:41,313
So in GNS3 terminology,

236
00:09:41,313 --> 00:09:44,687
if you take a look at this
window here, off to the left.

237
00:09:44,687 --> 00:09:46,231
This is a tool bar here,

238
00:09:46,231 --> 00:09:48,963
that shows you all of the
nodes that are available.

239
00:09:48,963 --> 00:09:51,614
So, for example, if I
click on this one here,

240
00:09:51,614 --> 00:09:55,561
this shows me all of the router
nodes that are available.

241
00:09:55,561 --> 00:09:59,187
This shows me my switching
nodes that are available,

242
00:09:59,187 --> 00:10:01,854
or my PC nodes, or a Cloud node.

243
00:10:03,294 --> 00:10:06,602
So pretty much, anything
that you can drag and drop

244
00:10:06,602 --> 00:10:08,758
into this working area right here,

245
00:10:08,758 --> 00:10:12,133
is what GNS3 considers to be a node,

246
00:10:12,133 --> 00:10:16,494
whether it be a router, a
switch, a PC, a firewall,

247
00:10:16,494 --> 00:10:21,020
they're all considered nodes
from GNS3's standpoint.

248
00:10:21,020 --> 00:10:23,331
So as far as basic
terminology is concerned,

249
00:10:23,331 --> 00:10:25,755
that concludes this particular video,

250
00:10:25,755 --> 00:10:28,842
and the next set of videos
will take a better look

251
00:10:28,842 --> 00:10:30,002
at this user interface,

252
00:10:30,002 --> 00:10:32,205
and see what the various tool bars are,

253
00:10:32,205 --> 00:10:35,890
and how we can start building
some basic topologies.

254
00:10:35,890 --> 00:10:39,390
(electronic sound effect)

