WEBVTT

0:00:08.560000 --> 0:00:09.840000
 So welcome back.

0:00:09.840000 --> 0:00:13.040000
 In this particular video we're going
 to continue our investigation into

0:00:13.040000 --> 0:00:16.500000
 the GNS3 application by looking at some
 of the other toolbars and we're

0:00:16.500000 --> 0:00:20.080000
 going to continue building a topology
 and getting some of this stuff to

0:00:20.080000 --> 0:00:26.760000
 work. So that being the case, let's
 go ahead and get started.

0:00:26.760000 --> 0:00:31.340000
 So I'm starting once again with a clean
 slate and just to make things

0:00:31.340000 --> 0:00:34.280000
 simple, we're just going to start with
 creating a topology with routers.

0:00:34.280000 --> 0:00:35.660000
 Nothing but routers.

0:00:35.660000 --> 0:00:39.040000
 So let's just do a simple
 topology of three routers.

0:00:39.040000 --> 0:00:40.200000
 And remember what I said?

0:00:40.200000 --> 0:00:43.360000
 That when I drag and drop something,
 if I hold down the shift button,

0:00:43.360000 --> 0:00:46.040000
 I can actually do more than one.

0:00:46.040000 --> 0:00:47.320000
 So I'll just do three routers.

0:00:47.320000 --> 0:00:49.500000
 So there we go. So I've
 got a total of four.

0:00:49.500000 --> 0:00:54.640000
 Just make a nice topology
 out of that.

0:00:54.640000 --> 0:00:57.140000
 Okay, so I've got four routers.

0:00:57.140000 --> 0:01:00.200000
 Now, first thing to note is look in
 the upper right corner which says

0:01:00.200000 --> 0:01:01.880000
 topology summary.

0:01:01.880000 --> 0:01:03.520000
 What is this telling us?

0:01:03.520000 --> 0:01:07.740000
 Well, every device listed here is going
 to have one of two different colors.

0:01:07.740000 --> 0:01:09.720000
 So actually it could
 be one of three.

0:01:09.720000 --> 0:01:12.000000
 Red means it's not doing anything.


0:01:12.000000 --> 0:01:19.040000
 It's stopped. It's sort of like when
 you turn the router on, and I'll

0:01:19.040000 --> 0:01:20.520000
 just go ahead and do that.

0:01:20.520000 --> 0:01:24.400000
 And I'll talk more about turning
 it on in just a second.

0:01:24.400000 --> 0:01:26.800000
 Then notice it turns green.

0:01:26.800000 --> 0:01:29.700000
 So you'll see most likely
 red or green.

0:01:29.700000 --> 0:01:32.840000
 Sometimes what you
 will see is yellow.

0:01:32.840000 --> 0:01:35.680000
 Yellow is usually a transitory
 situation.

0:01:35.680000 --> 0:01:37.960000
 It's usually like
 something's wrong.

0:01:37.960000 --> 0:01:41.180000
 It's trying to start, but
 there's some problem.

0:01:41.180000 --> 0:01:43.340000
 I haven't seen that a whole lot.

0:01:43.340000 --> 0:01:47.620000
 And usually when it does turn yellow,
 usually if I just wait a few minutes,

0:01:47.620000 --> 0:01:51.280000
 it will sort itself out
 and it will turn green.

0:01:51.280000 --> 0:01:55.300000
 If it doesn't, if it just stays in the
 yellow state, what I would recommend

0:01:55.300000 --> 0:01:59.280000
 is just right click on that router,
 that particular router, delete it,

0:01:59.280000 --> 0:02:01.940000
 and then try to drag and
 drop a new one in.

0:02:01.940000 --> 0:02:04.720000
 And hopefully that will
 rectify the situation.

0:02:04.720000 --> 0:02:08.480000
 So right now it shows me I've got four
 devices, three of which are stopped,

0:02:08.480000 --> 0:02:12.080000
 not running at all, one
 of which is running.

0:02:12.080000 --> 0:02:14.540000
 Now also something
 I want you to know.

0:02:14.540000 --> 0:02:18.000000
 As you drag and drop these routers
 in here, notice that by default it

0:02:18.000000 --> 0:02:23.120000
 names them R1, R2, R3, R4, they're just
 named in the order in which you

0:02:23.120000 --> 0:02:27.300000
 drag them in. You can change
 these names if you want to.

0:02:27.300000 --> 0:02:31.460000
 Now changing the name is just going
 to change the name on the topology

0:02:31.460000 --> 0:02:35.400000
 diagram. It's not actually going to
 change the host name of the router.

0:02:35.400000 --> 0:02:38.580000
 You would still have to log
 into the router to do that.

0:02:38.580000 --> 0:02:40.340000
 But I can change the name here.

0:02:40.340000 --> 0:02:41.560000
 I want to show you something.

0:02:41.560000 --> 0:02:42.520000
 Let's compare the difference.

0:02:42.520000 --> 0:02:45.160000
 First of all, I'm going to change the
 name of a router that's not running.

0:02:45.160000 --> 0:02:47.300000
 So R2 is currently read.

0:02:47.300000 --> 0:02:49.720000
 So I would right click on R2.

0:02:49.720000 --> 0:02:53.320000
 And the second item down
 is change host name.

0:02:53.320000 --> 0:02:55.220000
 So I just select that.

0:02:55.220000 --> 0:03:01.100000
 And I'll just type in
 San Jose and hit OK.

0:03:01.100000 --> 0:03:02.420000
 And it changes the name.

0:03:02.420000 --> 0:03:07.180000
 No problem. Now what if I tried doing
 that to R1 who's currently running

0:03:07.180000 --> 0:03:10.100000
 change host name?

0:03:10.100000 --> 0:03:13.480000
 How about San Francisco?

0:03:13.480000 --> 0:03:18.040000
 Notice it does not
 change the name.

0:03:18.040000 --> 0:03:24.140000
 And down here in this bottom window,
 see if I can display that for you

0:03:24.140000 --> 0:03:25.620000
 a little bit. There you go.

0:03:25.620000 --> 0:03:31.860000
 It actually says server error, unable
 to rename VM instance R1.

0:03:31.860000 --> 0:03:37.740000
 So the takeaway from this is that there
 is no way to change the name of

0:03:37.740000 --> 0:03:39.740000
 a router once you've started it.

0:03:39.740000 --> 0:03:42.480000
 So if you want to change the name, remember,
 it's just the displayed name

0:03:42.480000 --> 0:03:44.220000
 here in the topology.

0:03:44.220000 --> 0:03:55.260000
 You have to stop that router and then
 change the name while it is stopped.

0:03:55.260000 --> 0:03:56.740000
 And then it will let me change it.


0:03:56.740000 --> 0:04:00.240000
 I'm going to leave the
 other two as they are.

0:04:00.240000 --> 0:04:03.600000
 Okay. And also one other
 thing I want to mention.

0:04:03.600000 --> 0:04:09.020000
 So that other window I just referred
 to down there at the bottom down

0:04:09.020000 --> 0:04:12.000000
 here, the console window.

0:04:12.000000 --> 0:04:15.820000
 Most likely you're probably not
 going to need that for anything.

0:04:15.820000 --> 0:04:17.780000
 Now don't let this
 get you confused.

0:04:17.780000 --> 0:04:21.740000
 When it says console window here, this
 does not mean, oh, that must be

0:04:21.740000 --> 0:04:25.820000
 the window I go into to issue my iOS
 commands like host name and enable

0:04:25.820000 --> 0:04:27.620000
 password and IP address.

0:04:27.620000 --> 0:04:30.400000
 No, that's not what
 that window is for.

0:04:30.400000 --> 0:04:34.560000
 That console window allows you to provide
 command line commands to the

0:04:34.560000 --> 0:04:37.220000
 GNS3 application itself.

0:04:37.220000 --> 0:04:40.020000
 It's sort of like a window where you
 would type in DOS commands for your

0:04:40.020000 --> 0:04:41.380000
 laptop or something.

0:04:41.380000 --> 0:04:45.400000
 Chances are you probably don't know
 any of the GNS3 commands to type in

0:04:45.400000 --> 0:04:47.740000
 here and you probably
 won't need to.

0:04:47.740000 --> 0:04:50.760000
 So this is usually when you're doing
 some sort of troubleshooting and

0:04:50.760000 --> 0:04:53.820000
 trying to figure out on the back and what's
 going on with the GNS3 software,

0:04:53.820000 --> 0:04:55.440000
 something weird is happening.

0:04:55.440000 --> 0:04:58.600000
 So the only time I can really see you
 needing to go in there and type

0:04:58.600000 --> 0:05:02.160000
 something is if you're working with like
 a GNS3 developer and they actually

0:05:02.160000 --> 0:05:05.340000
 tell you what coming is to type in there
 and they want to see what output

0:05:05.340000 --> 0:05:10.080000
 comes out. But just for a regular GNS3
 user who's trying to work with

0:05:10.080000 --> 0:05:13.800000
 this, the console window really
 isn't going to do you much good.

0:05:13.800000 --> 0:05:15.260000
 You're not really in
 doing anything there.

0:05:15.260000 --> 0:05:17.940000
 It's really just going to be there
 to show you if there's errors.

0:05:17.940000 --> 0:05:21.120000
 That's really what you'd be looking
 for in that particular case.

0:05:21.120000 --> 0:05:23.780000
 You're not really going to
 type anything in there.

0:05:23.780000 --> 0:05:27.520000
 Okay, so another thing I want to
 show you in this particular case.

0:05:27.520000 --> 0:05:33.620000
 So so far we've looked at the
 devices toolbar on the left.

0:05:33.620000 --> 0:05:36.360000
 We've looked at the main
 workspace in the center.

0:05:36.360000 --> 0:05:39.680000
 We've talked about the topology summary
 in the right, which is really

0:05:39.680000 --> 0:05:42.860000
 just used to show you what devices are
 currently on and what devices are

0:05:42.860000 --> 0:05:46.400000
 off. We've looked at the console window,
 which we don't really need to

0:05:46.400000 --> 0:05:48.200000
 pay that much attention to.

0:05:48.200000 --> 0:05:52.420000
 And the last thing I want to show you
 right here is this window right

0:05:52.420000 --> 0:05:55.600000
 here, the server's summary window.


0:05:55.600000 --> 0:06:00.320000
 What this is used for is to tell you
 how much of your current CPU and

0:06:00.320000 --> 0:06:04.000000
 memory is being consumed by GNS3.

0:06:04.000000 --> 0:06:06.960000
 Now right now you can
 see not a whole lot.

0:06:06.960000 --> 0:06:11.240000
 My CPU is not being used by this
 because really nothing's running.

0:06:11.240000 --> 0:06:13.900000
 I think all of my routers
 right now are turned off.

0:06:13.900000 --> 0:06:18.420000
 So there's really almost no CPU
 usage being used by this.

0:06:18.420000 --> 0:06:22.520000
 Now RAM, 54.9%, you might be
 thinking, wait a second.

0:06:22.520000 --> 0:06:27.200000
 Why is half of my RAM already being
 used when nothing's been turned on

0:06:27.200000 --> 0:06:30.940000
 yet? This is actually showing you
 sort of all the RAM you have.

0:06:30.940000 --> 0:06:34.680000
 Not only the RAM is being used by GNS3,
 but any other open windows you

0:06:34.680000 --> 0:06:38.560000
 have or anything like that, which
 leads me to a very good point.

0:06:38.560000 --> 0:06:43.540000
 Ideally, when you're using GNS3 in an
 ideal world, you're going to close

0:06:43.540000 --> 0:06:46.460000
 down all the other applications
 on your laptop.

0:06:46.460000 --> 0:06:49.780000
 Because remember, everything you have
 open, every tab you have open in

0:06:49.780000 --> 0:06:54.440000
 your browser, your email program, your
 instant messaging program, they're

0:06:54.440000 --> 0:06:56.320000
 all consuming memory.

0:06:56.320000 --> 0:06:59.700000
 Vital memory that you're going
 to need for these routers.

0:06:59.700000 --> 0:07:02.200000
 Because remember, each one of these
 routers when you open it up is going

0:07:02.200000 --> 0:07:07.240000
 to take somewhere between like 128
 megabytes if you're lucky, all the

0:07:07.240000 --> 0:07:11.540000
 way up to 512 megabytes for some
 of the 7200 series images.

0:07:11.540000 --> 0:07:14.700000
 So that's going to eat up your
 RAM really, really quickly.

0:07:14.700000 --> 0:07:18.380000
 So right now this is showing, you know,
 I've got like four different windows

0:07:18.380000 --> 0:07:21.040000
 open of Google Chrome right now.

0:07:21.040000 --> 0:07:23.280000
 I've also got email open outlook.

0:07:23.280000 --> 0:07:24.960000
 I've also got a chat program open.


0:07:24.960000 --> 0:07:31.080000
 So right now without GNS3 really doing
 anything already, 54.9% of my memory

0:07:31.080000 --> 0:07:32.500000
 is already used.

0:07:32.500000 --> 0:07:35.760000
 And once I start up these routers, let's
 see how that's going to affect

0:07:35.760000 --> 0:07:40.360000
 things, which brings
 me to my next point.

0:07:40.360000 --> 0:07:42.340000
 How do I start up a router?

0:07:42.340000 --> 0:07:44.880000
 Well, there's two ways
 you can do it.

0:07:44.880000 --> 0:07:49.660000
 One way is you can just take a
 router and right click on it.

0:07:49.660000 --> 0:07:53.760000
 And you'll see here that if you scroll
 down about, oh, I don't know, 10

0:07:53.760000 --> 0:07:57.180000
 or 11 icons down is
 the start button.

0:07:57.180000 --> 0:07:58.940000
 And you can just click on that.

0:07:58.940000 --> 0:08:04.340000
 And then if it successfully starts,
 it'll turn green over here.

0:08:04.340000 --> 0:08:09.980000
 The other way you can do it is up in
 the top here in the GNS toolbar.

0:08:09.980000 --> 0:08:15.560000
 If you take a look at this, if I zoom
 in, this says start or resume all

0:08:15.560000 --> 0:08:22.140000
 devices. So if you press that and I'll
 go ahead and do that, all of your

0:08:22.140000 --> 0:08:25.800000
 routers, actually everything
 that's in there will turn on.

0:08:25.800000 --> 0:08:33.620000
 Now, by doing that, how did that
 affect my CPU and my RAM usage?

0:08:33.620000 --> 0:08:36.620000
 See if I can get over there.

0:08:36.620000 --> 0:08:39.060000
 Come on. I'm using two screens.

0:08:39.060000 --> 0:08:41.320000
 So it's being difficult.

0:08:41.320000 --> 0:08:42.880000
 All right, let's do this.

0:08:42.880000 --> 0:08:46.420000
 I don't know if you can see it or not,
 but right now it says my local

0:08:46.420000 --> 0:08:48.160000
 CPU. It's actually pretty good.

0:08:48.160000 --> 0:08:51.800000
 It's only it's fluctuating
 between 2.5 and 4%.

0:08:51.800000 --> 0:08:54.060000
 My RAM has gone up a little bit.

0:08:54.060000 --> 0:09:01.220000
 Previously, it was like 59% of my RAM
 was used and now 65.3% of my RAM

0:09:01.220000 --> 0:09:06.340000
 is used. So and then if in case you're
 wondering, this particular laptop

0:09:06.340000 --> 0:09:10.260000
 I'm using has a total
 of 8 gigs of RAM.

0:09:10.260000 --> 0:09:15.180000
 So between everything I have opened
 right now, 65.3% is in use.

0:09:15.180000 --> 0:09:19.340000
 Let me just go ahead and shut down
 some of my other applications that

0:09:19.340000 --> 0:09:22.980000
 I don't need right now and see
 how that affects my RAM usage.

0:09:22.980000 --> 0:09:25.380000
 So I just shut down my instant
 messaging program.

0:09:25.380000 --> 0:09:28.600000
 That just shaved off 2 percentage
 points of RAM.

0:09:28.600000 --> 0:09:32.600000
 Now I'm going to shut down everything
 I have for Google Chrome.

0:09:32.600000 --> 0:09:34.580000
 So that's shut down.

0:09:34.580000 --> 0:09:38.160000
 So that knocked off quite a bit.

0:09:38.160000 --> 0:09:41.340000
 Almost 10 percentage points
 of RAM right there.

0:09:41.340000 --> 0:09:46.900000
 And as far as network devices,
 that's pretty much it.

0:09:46.900000 --> 0:09:50.400000
 I've also got PowerPoint open, which
 actually consumes a lot of RAM.

0:09:50.400000 --> 0:09:53.040000
 So let me go ahead
 and disable that.

0:09:53.040000 --> 0:09:55.700000
 So now PowerPoint is closing.

0:09:55.700000 --> 0:09:59.180000
 So it's from 52.9 or 53.

0:09:59.180000 --> 0:10:03.000000
 We now go down to what?

0:10:03.000000 --> 0:10:06.700000
 All right. So that saved a little
 bit, not as much as I expected.

0:10:06.700000 --> 0:10:08.460000
 So it's now down to 52%.

0:10:08.460000 --> 0:10:12.440000
 And I've also got a Microsoft Word
 document that's open right now.

0:10:12.440000 --> 0:10:14.200000
 I'll go ahead and shut that down.

0:10:14.200000 --> 0:10:19.540000
 All right. And I've got Microsoft
 Outlook up as well.

0:10:19.540000 --> 0:10:20.880000
 Let's shut that down.

0:10:20.880000 --> 0:10:26.460000
 So at this point, the only thing I have
 open and running is GNS3 itself

0:10:26.460000 --> 0:10:29.960000
 with four routers that are
 currently up and active.

0:10:29.960000 --> 0:10:33.500000
 And you can see, hopefully you can
 see, let me see if I can zoom in on

0:10:33.500000 --> 0:10:35.220000
 this a little bit.

0:10:35.220000 --> 0:10:38.800000
 You can see currently with four routers
 running and no other applications

0:10:38.800000 --> 0:10:46.380000
 it's using slightly over 1% of
 my CPU and about 47% of my RAM.

0:10:46.380000 --> 0:10:49.600000
 Not too bad. Okay.

0:10:49.600000 --> 0:11:00.720000
 So that, so as far as this not
 a big deal to start them all.

0:11:00.720000 --> 0:11:05.920000
 But if you've got larger topologies of
 like 7, 8, 9, plus routers, probably

0:11:05.920000 --> 0:11:08.040000
 don't want to use the
 start all button.

0:11:08.040000 --> 0:11:10.540000
 I haven't actually experienced
 this myself.

0:11:10.540000 --> 0:11:14.080000
 I've read a lot of websites and documents
 that said people actually did

0:11:14.080000 --> 0:11:17.900000
 have problems with their laptop when
 they tried to start lots of devices

0:11:17.900000 --> 0:11:21.840000
 simultaneously. So I would say as a
 general rule of thumb, if you've got

0:11:21.840000 --> 0:11:25.260000
 six or more devices, it's probably
 better to just right click on them

0:11:25.260000 --> 0:11:28.980000
 one at a time and start them up rather
 than starting them all at the same

0:11:28.980000 --> 0:11:32.340000
 time. Now how do I stop a device?

0:11:32.340000 --> 0:11:33.780000
 Same type of thing.

0:11:33.780000 --> 0:11:35.960000
 Right click on it.

0:11:35.960000 --> 0:11:41.340000
 And then if I scroll down here, you
 can see there is the stop button and

0:11:41.340000 --> 0:11:43.040000
 that will stop it.

0:11:43.040000 --> 0:11:49.760000
 Or I could go up here to the red box
 and stop everything all at once.

0:11:49.760000 --> 0:11:51.880000
 And now it stopped.

0:11:51.880000 --> 0:11:53.240000
 So that's pretty easy.

0:11:53.240000 --> 0:11:56.500000
 We also talked already about how to
 do connections between these guys.

0:11:56.500000 --> 0:11:59.660000
 So let me just go ahead and set up some
 fast ethernet connections between

0:11:59.660000 --> 0:12:03.620000
 them. Maybe a serial connection
 between these two guys.

0:12:03.620000 --> 0:12:08.160000
 Another serial connection
 between these two guys.

0:12:08.160000 --> 0:12:12.680000
 And we'll just leave it like that and
 then press my link button again

0:12:12.680000 --> 0:12:17.000000
 to stop that. Now one other thing here
 about links that I want to mention

0:12:17.000000 --> 0:12:21.740000
 is that unlike real physical routers,
 now let's think about this.

0:12:21.740000 --> 0:12:24.560000
 If you've ever had any practice connecting
 real physical routers together

0:12:24.560000 --> 0:12:28.000000
 or actually like in a remote lab or
 something, one of the things you've

0:12:28.000000 --> 0:12:32.800000
 experienced, and if you haven't, the
 CCNA on up will test you on this,

0:12:32.800000 --> 0:12:36.180000
 is that when you have a back-to-back
 serial connection between routers,

0:12:36.180000 --> 0:12:41.520000
 one of those routers is acting as
 a DCE and the other is a DTE.

0:12:41.520000 --> 0:12:42.760000
 And what does that mean?

0:12:42.760000 --> 0:12:49.080000
 That means the DCE side is providing
 a heartbeat or like what we call

0:12:49.080000 --> 0:12:58.380000
 a real back-to-back cable between two
 physical routers, one of them that's

0:12:58.380000 --> 0:13:03.000000
 the DCE side has to be configured
 with the clock rate command.

0:13:03.000000 --> 0:13:06.440000
 Otherwise that interface either won't
 come up at all or it'll flap.

0:13:06.440000 --> 0:13:08.100000
 Go up, down, up, down.

0:13:08.100000 --> 0:13:11.780000
 Well here in GNS3, you
 don't have to do that.

0:13:11.780000 --> 0:13:16.400000
 As soon as I start these routers, I
 can just no shut those interfaces

0:13:16.400000 --> 0:13:19.580000
 without inserting any clock
 rate command and it'll work.

0:13:19.580000 --> 0:13:23.780000
 I've actually seen that GNS3 actually
 puts in a clock rate by default

0:13:23.780000 --> 0:13:25.940000
 on both sides of the serial link.

0:13:25.940000 --> 0:13:30.800000
 But even if you take that clock rate
 out, no problem because it'll just

0:13:30.800000 --> 0:13:33.400000
 come right up. No worries.

0:13:33.400000 --> 0:13:37.080000
 Also everything you see here like the
 names, they can be dragged so if

0:13:37.080000 --> 0:13:40.080000
 they're currently in the way, you
 can drag them out of the way.

0:13:40.080000 --> 0:13:45.040000
 Now you might be looking at this and
 saying okay, but one thing that's

0:13:45.040000 --> 0:13:48.420000
 sort of confusing here is I don't know
 which interface is connecting to

0:13:48.420000 --> 0:13:49.200000
 which interface.

0:13:49.200000 --> 0:13:53.740000
 Is this FastEath and it's 0,
 0 or 0, 1 or something else?

0:13:53.740000 --> 0:13:56.680000
 Well here's a real quick and
 easy way to figure that out.

0:13:56.680000 --> 0:14:00.860000
 Up here in the toolbar
 at the very top.

0:14:00.860000 --> 0:14:06.360000
 Notice this one right here, if I hover
 over it says show slash hide interface

0:14:06.360000 --> 0:14:12.200000
 labels. So if I click on that, the
 interface names get displayed.

0:14:12.200000 --> 0:14:14.600000
 Now some of them don't line
 up very well, that's okay.

0:14:14.600000 --> 0:14:20.940000
 Just drag and drop it into place so it's
 a little bit more visually appealing.

0:14:20.940000 --> 0:14:22.920000
 So you're definitely going
 to want to do that.

0:14:22.920000 --> 0:14:27.740000
 Click on that show interfaces button
 to keep tracking your mind which

0:14:27.740000 --> 0:14:30.800000
 interface is connected
 to which interface.

0:14:30.800000 --> 0:14:33.260000
 What else can you do from here?

0:14:33.260000 --> 0:14:35.020000
 All right, another thing
 I want to show you.

0:14:35.020000 --> 0:14:40.120000
 A lot of times to make the topology more
 visually exciting, more visually

0:14:40.120000 --> 0:14:41.760000
 illustrative of what you want.

0:14:41.760000 --> 0:14:46.600000
 You want to draw like circles and squares
 to represent like OSPF areas,

0:14:46.600000 --> 0:14:49.520000
 BGP autonomous systems,
 stuff like that.

0:14:49.520000 --> 0:14:51.020000
 So how would you do that?

0:14:51.020000 --> 0:14:54.920000
 Well that's here in
 this upper area.

0:14:54.920000 --> 0:14:58.860000
 So this right here
 draws a rectangle.

0:14:58.860000 --> 0:15:03.520000
 So if I click on it and just then click
 anywhere in my white space, there's

0:15:03.520000 --> 0:15:17.540000
 a rectangle and then I now notice that
 by default the shape, you know

0:15:17.540000 --> 0:15:22.420000
 think about this like in, if you have any
 experience with Microsoft PowerPoint,

0:15:22.420000 --> 0:15:26.920000
 you know that as you put things on top
 of things, some of the stuff underneath

0:15:26.920000 --> 0:15:31.280000
 can disappear. PowerPoint has this idea
 of layers right where you if you

0:15:31.280000 --> 0:15:34.140000
 have a shape and then you put something
 else on it, the other thing will

0:15:34.140000 --> 0:15:36.200000
 be on the top layer and this
 will be on the bottom layer.

0:15:36.200000 --> 0:15:40.180000
 But with Microsoft PowerPoint, you can
 do like the send backward or bring

0:15:40.180000 --> 0:15:43.000000
 forward option to
 change the layers.

0:15:43.000000 --> 0:15:44.400000
 Well you can do the same
 thing right here.

0:15:44.400000 --> 0:15:46.660000
 Like right now you say,
 hey where are my links?

0:15:46.660000 --> 0:15:50.240000
 Well the links are still there but
 they're underneath the square.

0:15:50.240000 --> 0:15:51.100000
 We can't see them.

0:15:51.100000 --> 0:15:53.160000
 So what we want to do is we
 want to swap them around.

0:15:53.160000 --> 0:15:57.820000
 We want to take this square here and
 lower it one layer so that the links

0:15:57.820000 --> 0:16:00.320000
 are on top of it and
 we can see that.

0:16:00.320000 --> 0:16:07.240000
 So just on the square itself, right
 click and select lower one layer.

0:16:07.240000 --> 0:16:12.780000
 And now it's going to give you just
 a right click on this to bring it

0:16:12.780000 --> 0:16:14.760000
 up again if you want to move it.

0:16:14.760000 --> 0:16:18.440000
 See now that's on a lower layer, I
 can't, well actually I can move it

0:16:18.440000 --> 0:16:19.160000
 which is kind of interesting.

0:16:19.160000 --> 0:16:23.720000
 It is movable. So that might be
 an old message but there it is.

0:16:23.720000 --> 0:16:27.300000
 So and I could also put in
 an ellipse or a circle.

0:16:27.300000 --> 0:16:32.980000
 And just like the square, I can
 modify the shape of that.

0:16:32.980000 --> 0:16:37.880000
 And notice right now that that's something
 new so that ended up on the

0:16:37.880000 --> 0:16:41.800000
 top layers. Now overlaying the circle
 so now I want to lower that one

0:16:41.800000 --> 0:16:45.640000
 layer. There we go.

0:16:45.640000 --> 0:16:48.740000
 What are some other things
 that you can do?

0:16:48.740000 --> 0:16:53.700000
 We know that by default when you save
 any time you do file save project

0:16:53.700000 --> 0:16:57.780000
 it creates a picture
 of this, a PNG file.

0:16:57.780000 --> 0:17:01.960000
 But let's say for example you'd whatever
 reason you didn't want to save

0:17:01.960000 --> 0:17:04.360000
 it right now but you did
 want to create a picture.

0:17:04.360000 --> 0:17:05.860000
 All right, very easy.

0:17:05.860000 --> 0:17:09.400000
 Right here this button
 take a screenshot.

0:17:09.400000 --> 0:17:14.840000
 So I'll just click that and now ask me
 where do I want to put the screenshot.

0:17:14.840000 --> 0:17:24.180000
 So I'll just save it as a current topology
 and I'll save it to my desktop.

0:17:24.180000 --> 0:17:26.180000
 And then I can save it.

0:17:26.180000 --> 0:17:30.500000
 So that's just another way of creating
 a screenshot of your workspace

0:17:30.500000 --> 0:17:34.300000
 right there. So that's
 to create a screenshot.

0:17:34.300000 --> 0:17:39.660000
 As you can see these buttons like it
 sounds like zoom in or zoom out to

0:17:39.660000 --> 0:17:41.480000
 allow you to move around.

0:17:41.480000 --> 0:17:43.840000
 You've got some scroll bars here if
 you want to center things a little

0:17:43.840000 --> 0:17:50.540000
 bit better. And there's a few more
 things I want to show you on here.

0:17:50.540000 --> 0:17:51.940000
 So what else can we talk about?

0:17:51.940000 --> 0:17:55.360000
 Okay, so let's start up my
 routers as an example.

0:17:55.360000 --> 0:17:58.860000
 I'll just start them all because I've
 only got four routers here to begin

0:17:58.860000 --> 0:18:01.720000
 with. Okay, so they're
 all started this point.

0:18:01.720000 --> 0:18:02.920000
 Now the moment of truth.

0:18:02.920000 --> 0:18:04.900000
 How do I actually configure
 these things?

0:18:04.900000 --> 0:18:08.660000
 I mean I did all this because I want
 to practice the Cisco iOS command

0:18:08.660000 --> 0:18:10.340000
 line. So how do I do that?

0:18:10.340000 --> 0:18:12.740000
 What is a couple of ways
 you can do this.

0:18:12.740000 --> 0:18:20.520000
 Now by default GNS3 defaults to using
 putty as its terminal as its terminal

0:18:20.520000 --> 0:18:26.460000
 application. So with putty every time
 you click on a router or an ether

0:18:26.460000 --> 0:18:29.820000
 switch router it's going to
 bring up a new putty window.

0:18:29.820000 --> 0:18:33.400000
 And so you're going to end up with potentially
 lots of putty windows that

0:18:33.400000 --> 0:18:35.560000
 you're going to have
 to navigate around.

0:18:35.560000 --> 0:18:38.640000
 In my particular case I've already
 changed it in the background to use

0:18:38.640000 --> 0:18:42.040000
 secure CRT so I can
 have tab ability.

0:18:42.040000 --> 0:18:43.520000
 And I'll show you
 in another video.

0:18:43.520000 --> 0:18:44.780000
 It's real quick to do that.

0:18:44.780000 --> 0:18:46.440000
 I'll show you another
 video how to do that.

0:18:46.440000 --> 0:18:50.660000
 So basically to get to your console
 you can do one of two things.

0:18:50.660000 --> 0:18:52.940000
 You can double click on a router.

0:18:52.940000 --> 0:18:59.140000
 There we go. And notice
 how fast it is.

0:18:59.140000 --> 0:19:00.700000
 I mean it's there it is.

0:19:00.700000 --> 0:19:04.300000
 I mean if that was a real Cisco router
 and you powered it on you'd be

0:19:04.300000 --> 0:19:08.280000
 looking at three to four minutes of just
 sitting there and twiddling your

0:19:08.280000 --> 0:19:10.880000
 thumbs while the iOS
 came up fully.

0:19:10.880000 --> 0:19:15.020000
 But remember you already decompressed
 this image when you inserted it

0:19:15.020000 --> 0:19:18.100000
 in a GNS3 so that's speeded
 up this whole process.

0:19:18.100000 --> 0:19:19.700000
 So here we are on the router.

0:19:19.700000 --> 0:19:22.620000
 And notice like what I said
 before what I said earlier.

0:19:22.620000 --> 0:19:27.160000
 Even though when I right clicked on the
 router and I renamed it, see here's

0:19:27.160000 --> 0:19:30.980000
 the name of the router but it did not
 actually change the host name of

0:19:30.980000 --> 0:19:34.720000
 the router. It still has the
 default host name of router.

0:19:34.720000 --> 0:19:38.420000
 So by changing the host name by right clicking
 that just changed the topology

0:19:38.420000 --> 0:19:41.380000
 image didn't actually
 change anything else.

0:19:41.380000 --> 0:19:46.040000
 So that's one way you can get into
 the router is by double clicking on

0:19:46.040000 --> 0:19:49.280000
 it. There's two more
 ways you can do it.

0:19:49.280000 --> 0:19:51.920000
 You can right click on it.

0:19:51.920000 --> 0:19:55.600000
 And if you right click on it now hold on
 a second you might think oh configure

0:19:55.600000 --> 0:19:56.900000
 that's what I want.

0:19:56.900000 --> 0:19:59.120000
 No that's not what that is.

0:19:59.120000 --> 0:20:03.300000
 That configure button if you
 select that brings up this.

0:20:03.300000 --> 0:20:08.980000
 For example you said oh I when I put
 in this 3725 I actually wanted to

0:20:08.980000 --> 0:20:11.860000
 put some wicks in there
 and I forgot to do that.

0:20:11.860000 --> 0:20:14.900000
 Or I want to change the amount
 of memory it's using.

0:20:14.900000 --> 0:20:17.780000
 Or you know change the
 image path name.

0:20:17.780000 --> 0:20:20.700000
 You probably don't want to do any of
 that stuff so it's not config that's

0:20:20.700000 --> 0:20:21.800000
 not what you want.

0:20:21.800000 --> 0:20:27.460000
 When you right click on it you want
 to go to console, console, and then

0:20:27.460000 --> 0:20:32.600000
 select that. And that will
 bring up your console.

0:20:32.600000 --> 0:20:34.520000
 So I said there were three ways.

0:20:34.520000 --> 0:20:35.980000
 So far I've shown you two of them.


0:20:35.980000 --> 0:20:40.360000
 Double clicking the router, right clicking
 it, and selecting console.

0:20:40.360000 --> 0:20:44.960000
 And then if you have like I said a fairly
 small topology like this remember

0:20:44.960000 --> 0:20:48.420000
 how I said you could start all the
 routers at one time with this green

0:20:48.420000 --> 0:20:53.480000
 arrow and you could stop all the routers
 at one time with the red square.

0:20:53.480000 --> 0:20:58.260000
 Well guess what this little icon right
 here if I zoom in on that console

0:20:58.260000 --> 0:21:00.800000
 connect to all devices.

0:21:00.800000 --> 0:21:05.020000
 If I press that it will bring up a console
 window to every single device

0:21:05.020000 --> 0:21:08.160000
 that I have simultaneously.

0:21:08.160000 --> 0:21:12.540000
 And because I'm using secure CRT and
 I've got set up for tabs there they

0:21:12.540000 --> 0:21:16.720000
 are. They all came up
 at the same time.

0:21:16.720000 --> 0:21:19.480000
 And now I can start doing
 my lab work at this point.

0:21:19.480000 --> 0:21:22.420000
 I can start configuring and
 doing whatever I want.

0:21:22.420000 --> 0:21:27.660000
 And then when I'm done just hit file,
 save project, save the current state,

0:21:27.660000 --> 0:21:29.560000
 and I'll be finished.

0:21:29.560000 --> 0:21:32.920000
 Now certainly there's a few more things
 I intend to show you in this video

0:21:32.920000 --> 0:21:36.360000
 series. But at this point if you just
 stopped right here and you walked

0:21:36.360000 --> 0:21:41.000000
 away you should be able to create a
 basic topology of routers connected

0:21:41.000000 --> 0:21:43.360000
 via either ethernet or serial.

0:21:43.360000 --> 0:21:44.820000
 You know how to start them.

0:21:44.820000 --> 0:21:46.260000
 You know how to stop them.

0:21:46.260000 --> 0:21:49.480000
 You know how to open up console windows
 to get in there and start configuring.

0:21:49.480000 --> 0:21:51.400000
 And at this point
 you're good to go.

0:21:51.400000 --> 0:21:53.620000
 But what are some things
 you don't know?

0:21:53.620000 --> 0:21:55.620000
 Well some things I'm going to show
 you in the future videos are number

0:21:55.620000 --> 0:21:59.160000
 one switches. How do I insert
 switches into this topology?

0:21:59.160000 --> 0:22:00.400000
 What are my various options?

0:22:00.400000 --> 0:22:01.680000
 I'll talk about that.

0:22:01.680000 --> 0:22:03.060000
 What about WAN switching?

0:22:03.060000 --> 0:22:07.220000
 For example at the CCNA and the CCNP
 level they want you to know about

0:22:07.220000 --> 0:22:10.080000
 frame relay. And so you're going to
 want to get experience with Cisco

0:22:10.080000 --> 0:22:14.160000
 iOS commands that relate to frame relay
 which means you're going to need

0:22:14.160000 --> 0:22:15.720000
 a frame relay switch.

0:22:15.720000 --> 0:22:16.980000
 How do I do that?

0:22:16.980000 --> 0:22:20.180000
 So those and a lot of other stuff are
 things I'm going to talk about in

0:22:20.180000 --> 0:22:22.300000
 videos coming up in just a moment.


