WEBVTT

0:00:08.080000 --> 0:00:11.800000
 In this video, we're going to look
 at yet another one of the built-in

0:00:11.800000 --> 0:00:16.020000
 nodes that's built into GNS3, which
 is the Frame Relay switch.

0:00:16.020000 --> 0:00:19.500000
 Chances are, if you're studying for some
 kind of Cisco certification test,

0:00:19.500000 --> 0:00:21.960000
 they're going to want you to know how
 to configure Frame Relay, at least

0:00:21.960000 --> 0:00:26.200000
 from the perspective of the router connecting
 into the Frame Relay cloud.

0:00:26.200000 --> 0:00:30.960000
 So we need something in that cloud to
 provide those Frame Relay connections.

0:00:30.960000 --> 0:00:33.380000
 And here's where we're going to use
 the Frame Relay switch that's built

0:00:33.380000 --> 0:00:39.060000
 into GNS3. So, before we get started,
 this is the topology that I'm going

0:00:39.060000 --> 0:00:40.660000
 to build. This is my objective.

0:00:40.660000 --> 0:00:44.080000
 So like any lab that you're building
 up, it's always a good idea to write

0:00:44.080000 --> 0:00:48.080000
 down like just a quick sketch on a
 piece of paper or something of what

0:00:48.080000 --> 0:00:50.620000
 it is that you're trying to accomplish
 what you're trying to build.

0:00:50.620000 --> 0:00:54.340000
 So in this particular case, R2 is actually
 going to have a total of two

0:00:54.340000 --> 0:00:58.420000
 PVCs, two frozen Frame Relay
 permanent virtual circuits.

0:00:58.420000 --> 0:01:02.380000
 From R2 to R4, that's going
 to be one of our PVCs.

0:01:02.380000 --> 0:01:06.600000
 And then another one
 from R2 going to R3.

0:01:06.600000 --> 0:01:09.580000
 And we can see here that I've selected
 the delCy numbers that I'd like

0:01:09.580000 --> 0:01:11.880000
 to use for each of these.

0:01:11.880000 --> 0:01:14.960000
 Now, much of this, in order to save
 time on this video, has already been

0:01:14.960000 --> 0:01:16.700000
 built up in GNS3.

0:01:16.700000 --> 0:01:19.700000
 I've already put in the virtual
 PCs, the routers.

0:01:19.700000 --> 0:01:22.040000
 I've already got my IP addresses
 and routing going on.

0:01:22.040000 --> 0:01:24.920000
 So really, I'm just going to show you
 how to configure the Frame Relay

0:01:24.920000 --> 0:01:28.760000
 switch. The purpose of this video is
 not to show you how to configure

0:01:28.760000 --> 0:01:33.460000
 the various Frame Relay commands
 within Cisco iOS on your routers.

0:01:33.460000 --> 0:01:34.680000
 That's not what this is for.

0:01:34.680000 --> 0:01:38.280000
 This is just purely to show you how to
 drag and drop the Frame Relay switch

0:01:38.280000 --> 0:01:42.400000
 in there, set up its interfaces and make
 sure that it has the delCy numbers

0:01:42.400000 --> 0:01:46.140000
 that you wish. So let's take
 a look at how we can do that.

0:01:46.140000 --> 0:01:49.480000
 So here we go. Most of
 this is already set up.

0:01:49.480000 --> 0:01:55.260000
 So over here within the switches category,
 the very last one is our Frame

0:01:55.260000 --> 0:01:59.960000
 Relay switch. So we can just drag
 and drop that into place.

0:01:59.960000 --> 0:02:03.400000
 And just like the Ethernet switch was
 automatically on, the Frame Relay

0:02:03.400000 --> 0:02:06.780000
 switch, as you can see here,
 also is automatically on.

0:02:06.780000 --> 0:02:08.940000
 Status light is green.

0:02:08.940000 --> 0:02:12.460000
 And just like the Ethernet switch where
 there was no command line to configure

0:02:12.460000 --> 0:02:14.740000
 it, we had to do it via the
 GUI, same thing here.

0:02:14.740000 --> 0:02:18.080000
 With the Frame Relay switch, just right
 click and from the right click

0:02:18.080000 --> 0:02:23.760000
 menu, just select Configure, which
 will bring up this box right here.

0:02:23.760000 --> 0:02:28.280000
 And now all we need to do is map these
 various ports with what we want

0:02:28.280000 --> 0:02:34.480000
 in our diagram. So if I take a look
 once again at my diagram, I wanted,

0:02:34.480000 --> 0:02:38.360000
 I want port number one to have
 actually two delCys on it.

0:02:38.360000 --> 0:02:40.380000
 So I'm going to have, I'm going to
 have to do this one at a time.

0:02:40.380000 --> 0:02:48.620000
 So delC number 101 on port one should
 be mapped to delC 202 on port two.

0:02:48.620000 --> 0:02:51.860000
 We're almost there, except instead
 of being mapped to delC 202 on port

0:02:51.860000 --> 0:02:54.920000
 two is being mapped to delC
 two to on port ten.

0:02:54.920000 --> 0:02:56.880000
 So that's the only thing
 I need to fix.

0:02:56.880000 --> 0:03:00.420000
 Just change that to
 port two, click Add.

0:03:00.420000 --> 0:03:03.440000
 So just with that one click of a button
 and changing that port number,

0:03:03.440000 --> 0:03:09.440000
 we have now created the red permanent
 virtual circuit from R2 to R3.

0:03:09.440000 --> 0:03:13.600000
 Now let's create the purple verminence
 permanent virtual circuit from

0:03:13.600000 --> 0:03:18.280000
 R2 to R4. So that's going
 to be delC 102.

0:03:18.280000 --> 0:03:22.140000
 Okay, so the delC number here is correct,
 but the port number is wrong.

0:03:22.140000 --> 0:03:24.140000
 We need to put it back
 on port number one.

0:03:24.140000 --> 0:03:29.100000
 And that should be going out port
 number three, which is delC 203.

0:03:29.100000 --> 0:03:30.540000
 And that is correct.

0:03:30.540000 --> 0:03:35.100000
 So let's just hit Add,
 Apply and okay.

0:03:35.100000 --> 0:03:38.240000
 So that's really all we have to do
 from the standpoint of configuring

0:03:38.240000 --> 0:03:39.240000
 the frame relay switch.

0:03:39.240000 --> 0:03:40.660000
 It's pretty simple.

0:03:40.660000 --> 0:03:42.660000
 Now we just need to connect
 things together.

0:03:42.660000 --> 0:03:44.800000
 Now a little word of warning
 or word of caution here.

0:03:44.800000 --> 0:03:48.900000
 I don't know if this was an intended
 feature or not, but I noticed when

0:03:48.900000 --> 0:03:53.120000
 creating this lab the first time that
 if I tried to link up using the

0:03:53.120000 --> 0:03:57.020000
 add a connection tool, my frame relay
 switched to my routers while the

0:03:57.020000 --> 0:04:01.620000
 routers were up and running, sometimes
 it worked, sometimes it didn't

0:04:01.620000 --> 0:04:04.900000
 work. I got a flashing message
 that just wouldn't go away.

0:04:04.900000 --> 0:04:08.460000
 So my suggestion to you would be in
 this particular case, make sure all

0:04:08.460000 --> 0:04:12.700000
 of your routers are powered off first,
 connect them via the connection

0:04:12.700000 --> 0:04:18.320000
 tool to the frame relay switch, and
 then turn the routers on afterwards.

0:04:18.320000 --> 0:04:21.340000
 Don't connect them up while
 the routers are on.

0:04:21.340000 --> 0:04:25.740000
 So at this moment, all of my routers
 as you can see are off, which is

0:04:25.740000 --> 0:04:30.580000
 what I want. So let's just
 start connecting things up.

0:04:30.580000 --> 0:04:34.080000
 So port number one here
 is going to go to R2.

0:04:34.080000 --> 0:04:36.840000
 I'll just connect it to
 serial two slash zero.

0:04:36.840000 --> 0:04:43.980000
 Port number two is going to go to
 once again two slash zero on R3.

0:04:43.980000 --> 0:04:49.300000
 And port number three is also going
 to go to two slash zero on R4.

0:04:49.300000 --> 0:04:55.980000
 Now let's move my names of interfaces
 and stuff around just a little bit

0:04:55.980000 --> 0:04:58.140000
 so it's a little bit clear.

0:04:58.140000 --> 0:05:05.680000
 Let's drop my delses into place.

0:05:05.680000 --> 0:05:13.100000
 Let's drop my port, my host
 IP addresses into place.

0:05:13.100000 --> 0:05:16.800000
 There we go. Looks like everything
 is ready to go.

0:05:16.800000 --> 0:05:20.920000
 So now let's just go ahead and turn
 on all of the other devices.

0:05:20.920000 --> 0:05:25.260000
 Okay. So how do we
 verify it works?

0:05:25.260000 --> 0:05:27.720000
 Well, let's go to one
 of these routers here.

0:05:27.720000 --> 0:05:32.220000
 Let's go to R4 as an example and see
 if he learns about routes to the

0:05:32.220000 --> 0:05:36.360000
 two network and the one network.

0:05:36.360000 --> 0:05:51.120000
 And he does. He's learned via EI-GRP,
 the remote networks of 222, 444

0:05:51.120000 --> 0:06:00.220000
 and 111. And if everything is working
 correctly, PC1 should be able to

0:06:00.220000 --> 0:06:03.180000
 ping across to PC3.

0:06:03.180000 --> 0:06:06.260000
 But even if that's not working, the
 frame relay is up and working.

0:06:06.260000 --> 0:06:11.560000
 There's no way that R4 could have learned
 about the 222 or the 111 network

0:06:11.560000 --> 0:06:15.560000
 unless it was done
 via frame relay.

0:06:15.560000 --> 0:06:18.840000
 So that's it. Dragging and dropping the
 frame relay built in node is actually

