1
00:00:09,176 --> 00:00:11,080
- So let's start with part one of building

2
00:00:11,080 --> 00:00:13,064
and troubleshooting this
lab and get it going.

3
00:00:13,064 --> 00:00:15,624
So in this first section we're just going

4
00:00:15,624 --> 00:00:18,440
to open up GNS3, we're
going to start our project

5
00:00:18,440 --> 00:00:20,648
and we're going to start
building the physical topology

6
00:00:20,648 --> 00:00:23,678
and adding all the links
and all that good stuff.

7
00:00:23,678 --> 00:00:25,854
So let's get going with that.

8
00:00:25,854 --> 00:00:30,021
So step number one is to
actually open the application.

9
00:00:31,816 --> 00:00:35,983
Alright and let's go ahead
and name this CCNA EIRP lab.

10
00:00:38,263 --> 00:00:39,399
You can call it whatever you want,

11
00:00:39,399 --> 00:00:41,207
that's just what I'm going to call it.

12
00:00:41,207 --> 00:00:43,271
Okay and once again this is the topology

13
00:00:43,271 --> 00:00:44,519
that we're going to
build so if you haven't

14
00:00:44,519 --> 00:00:47,847
done this already and
you're just following along

15
00:00:47,847 --> 00:00:50,095
with me I would recommend that you take

16
00:00:50,095 --> 00:00:52,927
a screen shot of this
image so that you can

17
00:00:52,927 --> 00:00:54,159
reference it because I'm going to pull

18
00:00:54,159 --> 00:00:56,079
this over to my other monitor so I can

19
00:00:56,079 --> 00:00:58,579
reference this as we build it.

20
00:01:00,255 --> 00:01:03,023
Okay so really this just
involves four routers

21
00:01:03,023 --> 00:01:05,439
so I'm going to go over here,
I'm going to drag the router

22
00:01:05,439 --> 00:01:07,583
but before I drop it,
before I let go of my mouse

23
00:01:07,583 --> 00:01:10,671
I'm going to hit the shift key
and then let go of my mouse,

24
00:01:10,671 --> 00:01:11,967
which as I mentioned in previous videos

25
00:01:11,967 --> 00:01:16,431
allows us to select more
than one router at a time.

26
00:01:16,431 --> 00:01:20,514
So let's go ahead and put
these into my topology.

27
00:01:24,255 --> 00:01:28,422
Alright and then we want to
create the physical links.

28
00:01:29,407 --> 00:01:31,007
So on the bottom we're going to be

29
00:01:31,007 --> 00:01:34,127
using fast ethernet all the way across.

30
00:01:34,127 --> 00:01:37,710
So I'm just using the
link tool to do that.

31
00:01:40,447 --> 00:01:41,647
And then on the top we're going

32
00:01:41,647 --> 00:01:45,230
to be using serial
interfaces to go across.

33
00:01:50,367 --> 00:01:53,089
Alright now we can unselect that tool

34
00:01:53,089 --> 00:01:55,922
and before we are done we need to,

35
00:01:56,895 --> 00:02:00,207
it's probably a good
idea to click on the show

36
00:02:00,207 --> 00:02:02,943
hide interfaces button right here so that

37
00:02:02,943 --> 00:02:05,087
we can actually see the interfaces

38
00:02:05,087 --> 00:02:07,583
on our topology diagram
so we don't get confused

39
00:02:07,583 --> 00:02:10,815
about what is connected to what.

40
00:02:10,815 --> 00:02:12,319
And just move those around a little bit

41
00:02:12,319 --> 00:02:15,663
so they're a little bit clearer to see.

42
00:02:15,663 --> 00:02:17,599
Okay that pretty much concludes it

43
00:02:17,599 --> 00:02:20,383
for this particular video,
that is all that was necessary

44
00:02:20,383 --> 00:02:22,367
to build the physical topology so before

45
00:02:22,367 --> 00:02:25,839
we leave here we're going
to want to save our project,

46
00:02:25,839 --> 00:02:28,756
so just File and then Save Project.

