WEBVTT

0:00:08.180000 --> 0:00:11.100000
 So in this video we're going to resume
 with where we left off and this

0:00:11.100000 --> 0:00:14.680000
 is part two. So in this particular case
 we're going to be adding our IP

0:00:14.680000 --> 0:00:17.820000
 addresses to all of our interfaces and
 we're going to be creating those

0:00:17.820000 --> 0:00:21.860000
 loopback interfaces and adding
 IP addresses to that as well.

0:00:21.860000 --> 0:00:24.860000
 Okay, so starting with the topology
 that we already created in the first

0:00:24.860000 --> 0:00:29.940000
 section. Let's go ahead and add
 our IP addresses to this.

0:00:29.940000 --> 0:00:34.280000
 So I'm just going to go ahead and turn
 on all the routers at this point

0:00:34.280000 --> 0:00:37.760000
 simultaneously because I only have
 four routers and it's okay to turn

0:00:37.760000 --> 0:00:39.260000
 that many on at once.

0:00:39.260000 --> 0:00:42.180000
 If I had a larger topology of eight
 or nine routers I probably want to

0:00:42.180000 --> 0:00:43.740000
 do them one at a time.

0:00:43.740000 --> 0:00:47.760000
 And also I'm going to want
 this to use secure CRT.

0:00:47.760000 --> 0:00:51.860000
 So I'm going to go to edit and preferences
 to make sure that I can use

0:00:51.860000 --> 0:00:56.600000
 the tabbed advantages
 of secure CRT.

0:00:56.600000 --> 0:01:00.820000
 And right now that
 is already set up.

0:01:00.820000 --> 0:01:05.060000
 So we can see here under console applications
 for telnet it is using secure

0:01:05.060000 --> 0:01:08.100000
 CRT and it's got all the correct arguments
 to do tabbing and everything

0:01:08.100000 --> 0:01:10.260000
 else. So we're okay there.

0:01:10.260000 --> 0:01:15.400000
 So hit okay. And let's just go ahead
 and verify all these routers are

0:01:15.400000 --> 0:01:18.260000
 indeed running because I can see here
 in the topology summary they're

0:01:18.260000 --> 0:01:20.760000
 all green. That's what
 I want to see.

0:01:20.760000 --> 0:01:22.820000
 So now I should be able
 to start them all up.

0:01:22.820000 --> 0:01:27.180000
 So go ahead and I'm going to console
 connect to every single one of them

0:01:27.180000 --> 0:01:33.400000
 all at the same time rather than
 hitting them individually.

0:01:33.400000 --> 0:01:35.140000
 And there we go.

0:01:35.140000 --> 0:01:39.060000
 Alright now for whatever reason secure
 CRT when it opens up it doesn't

0:01:39.060000 --> 0:01:41.400000
 put the tabs in the order
 I would actually like.

0:01:41.400000 --> 0:01:44.660000
 I want to be numerical you
 know one, two, three, four.

0:01:44.660000 --> 0:01:49.800000
 So I'm just going to move my routers
 around a little bit here to get them

0:01:49.800000 --> 0:01:55.820000
 where I want Okay let's just
 start with router one.

0:01:55.820000 --> 0:01:58.440000
 I'll go ahead and expand
 him for a moment.

0:01:58.440000 --> 0:02:08.700000
 Let's create the loop
 back interface first.

0:02:08.700000 --> 0:02:11.880000
 And then interface serial
 two slash zero.

0:02:11.880000 --> 0:02:18.440000
 Don't do not have to put a clock rate
 as if these were real routers because

0:02:18.440000 --> 0:02:25.920000
 in GNS3 we don't have
 to worry about that.

0:02:25.920000 --> 0:02:36.160000
 Alright so that takes care of the
 IP information for router one.

0:02:36.160000 --> 0:02:39.020000
 Let's go ahead and save his config because
 we're also going to be using

0:02:39.020000 --> 0:02:44.180000
 snapshots as we go along this process
 so we can go back and forth in time

0:02:44.180000 --> 0:02:47.680000
 if we need to change things
 or troubleshoot things.

0:02:47.680000 --> 0:02:48.800000
 So save his configuration.

0:02:48.800000 --> 0:02:54.380000
 Let's go ahead and minimize him and
 let's now go to, so for some reason

0:02:54.380000 --> 0:02:58.780000
 it moved these around trying
 to get me in trouble here.

0:02:58.780000 --> 0:03:03.000000
 Alright now let's
 go to router two.

0:03:03.000000 --> 0:03:16.640000
 Interface serial two slash zero that
 connects back to router one.

0:03:16.640000 --> 0:03:20.740000
 And interface serial two slash one
 that connects to router four.

0:03:20.740000 --> 0:03:33.280000
 That's pretty much all we have to do
 as far as IP addressing is concerned

0:03:33.280000 --> 0:03:38.940000
 on that router and make sure we save
 our configuration there as well.

0:03:38.940000 --> 0:03:45.320000
 I love how it keeps moving my windows
 on me when I expand and then contract.

0:03:45.320000 --> 0:03:49.020000
 That's just so adorable
 of secure CRT.

0:03:49.020000 --> 0:03:52.220000
 Okay so let's go ahead and
 go to router three now.

0:03:52.220000 --> 0:04:02.820000
 Interface fast ethernet zero zero
 which connects back to router one.

0:04:02.820000 --> 0:04:04.740000
 And interface fast ethernet.

0:04:04.740000 --> 0:04:07.560000
 Let's see I forgot so
 let's go back to GNS3.

0:04:07.560000 --> 0:04:11.100000
 It's fast ethernet zero slash one here
 which is the other interface that

0:04:11.100000 --> 0:04:12.620000
 we want to configure.

0:04:12.620000 --> 0:04:25.420000
 Let's save his configuration.

0:04:25.420000 --> 0:04:28.800000
 I'm just going to go ahead and close
 that window because I can't have

0:04:28.800000 --> 0:04:31.860000
 the window up anyway when I create
 a snapshot because all the routers

0:04:31.860000 --> 0:04:36.620000
 have to be powered off.

0:04:36.620000 --> 0:05:04.060000
 And the last router we need
 to configure is router four.

0:05:04.060000 --> 0:05:07.820000
 And let's finish off the
 IP addressing here.

0:05:07.820000 --> 0:05:17.400000
 And let's just verify that he's got
 all the correct IP addresses show

0:05:17.400000 --> 0:05:20.180000
 IP interface brief.

0:05:20.180000 --> 0:05:24.740000
 We've got our two physical interfaces
 and we have our loop back everything

0:05:24.740000 --> 0:05:27.860000
 looks good. So let's save
 the configuration here.

0:05:27.860000 --> 0:05:32.040000
 Let's go ahead and shut
 down secure CRT.

0:05:32.040000 --> 0:05:35.260000
 Now let's go ahead and use some of these
 other tools here to just include

0:05:35.260000 --> 0:05:36.780000
 what we've done so far.

0:05:36.780000 --> 0:05:41.400000
 So let's go ahead and use the add a note
 tool to now put in our IP addresses

0:05:41.400000 --> 0:05:45.300000
 and subnets so we can
 keep that in track.

0:05:45.300000 --> 0:05:48.440000
 So 1.2.1.x slash 24.

0:05:48.440000 --> 0:05:49.840000
 That looks good.

0:05:49.840000 --> 0:05:54.980000
 Let's go ahead and duplicate
 that four times.

0:05:54.980000 --> 0:05:58.940000
 All right, this one over here, we're
 going to right click on it and do

0:05:58.940000 --> 0:06:08.120000
 text edit. That one is
 going to be 2.4.2.x.

0:06:08.120000 --> 0:06:24.420000
 This one down here, we'll right click
 on that and text edit 1.3.1.x.

0:06:24.420000 --> 0:06:33.720000
 And this one down here
 will be 3.4.3.x.

0:06:33.720000 --> 0:06:41.320000
 Okay, and let's go ahead and use the add
 an ellipse tool or draw an ellipse

0:06:41.320000 --> 0:06:45.580000
 to represent our loopbacks
 that we've created.

0:06:45.580000 --> 0:06:51.840000
 We'll put one right here and then we'll
 right click that and hit duplicate.

0:06:51.840000 --> 0:06:57.420000
 And then we'll drag the
 new one over here.

0:06:57.420000 --> 0:07:00.660000
 And then once again, we'll use the add
 a note tool to actually draw inside

0:07:00.660000 --> 0:07:14.820000
 there. Loop back 0, 11, 11, 11.1.

0:07:14.820000 --> 0:07:17.340000
 Duplicate and edit.

0:07:17.340000 --> 0:07:26.180000
 All right, so that gives us everything
 we've done now from an IP perspective.

0:07:26.180000 --> 0:07:33.020000
 So let's go ahead and save
 our project as it is.

0:07:33.020000 --> 0:07:37.360000
 And at this point, let's go ahead and
 create a snapshot now of where we

0:07:37.360000 --> 0:07:41.080000
 are with all of our IP addresses intact
 before we start adding routing

0:07:41.080000 --> 0:07:42.900000
 protocols onto this.

0:07:42.900000 --> 0:07:49.120000
 So I'm going to create snapshot, create,
 I'm going to say IP addresses

0:07:49.120000 --> 0:08:00.640000
 only close. Ah, but I broke the cardinal
 rule, the cardinal rule of snapshots,

0:08:00.640000 --> 0:08:05.320000
 which is the routers must be in a powered
 down state when you do the snapshot.

0:08:05.320000 --> 0:08:07.960000
 That snapshot I just took
 might not even work.

0:08:07.960000 --> 0:08:10.100000
 So let's turn everything off.

0:08:10.100000 --> 0:08:12.940000
 Let's create a snapshot again.

0:08:12.940000 --> 0:08:20.480000
 I'll give it the exact same name,
 IP dash addresses dash only.

0:08:20.480000 --> 0:08:24.780000
 And then the one with the earlier
 timestamp, I will get rid of that.

0:08:24.780000 --> 0:08:32.060000
 There we go. All right, and that concludes
 this section of the video.

0:08:32.060000 --> 0:08:36.000000
 In the next section, we're going to
 finally start adding EIJRP to this

