1
00:00:02,856 --> 00:00:05,773
(electronic music)

2
00:00:08,834 --> 00:00:10,353
- So here we are at the last video

3
00:00:10,353 --> 00:00:13,211
for this particular CCNA EIGRP lab

4
00:00:13,211 --> 00:00:16,201
where we're gonna do
some path manipulation.

5
00:00:16,201 --> 00:00:17,368
So at present,

6
00:00:18,459 --> 00:00:22,210
when Router one is pinging
the loop back of Router four,

7
00:00:22,210 --> 00:00:24,012
I can expect that it's gonna

8
00:00:24,012 --> 00:00:25,760
take this fast Ethernet link.

9
00:00:25,760 --> 00:00:27,359
How would I actually prove that?

10
00:00:27,359 --> 00:00:29,109
Well, here's what we're gonna do.

11
00:00:29,109 --> 00:00:31,371
Let's go ahead and start the routers up.

12
00:00:31,371 --> 00:00:32,412
And let's go into Router one,

13
00:00:32,412 --> 00:00:33,305
and what we're gonna do is,

14
00:00:33,305 --> 00:00:34,565
we're gonna look at his routing table.

15
00:00:34,565 --> 00:00:36,549
And then we're gonna see,
according to his routing table

16
00:00:36,549 --> 00:00:38,565
if he was gonna route packets

17
00:00:38,565 --> 00:00:41,161
to the 44.44.44 network,

18
00:00:41,161 --> 00:00:43,515
what would his egress interface be?

19
00:00:43,515 --> 00:00:46,348
Where would he send those packets?

20
00:00:51,025 --> 00:00:52,192
Show IP route.

21
00:00:55,370 --> 00:00:57,782
And we can see he's
learned of that network

22
00:00:57,782 --> 00:01:00,388
and he would route them
out the fast Ethernet link,

23
00:01:00,388 --> 00:01:02,705
just like we thought.

24
00:01:02,705 --> 00:01:04,519
Okay, now we also saw previously we did

25
00:01:04,519 --> 00:01:06,852
sho ip eigrp topol all-links

26
00:01:09,162 --> 00:01:12,505
We did see that he had
learned about that route

27
00:01:12,505 --> 00:01:14,746
via the slow-speed serial.

28
00:01:14,746 --> 00:01:16,449
So what we need to do

29
00:01:16,449 --> 00:01:20,616
is we need to ultimately make
EIGRP follow the top link.

30
00:01:22,254 --> 00:01:25,133
We have to trick it, or
fool it, into thinking

31
00:01:25,133 --> 00:01:29,222
that the top link is
actually the better path.

32
00:01:29,222 --> 00:01:30,716
Well let me ask you a question.

33
00:01:30,716 --> 00:01:33,725
By default, when EIGRP is
coming up with its metric,

34
00:01:33,725 --> 00:01:36,250
that big long number
that we call distance,

35
00:01:36,250 --> 00:01:39,888
what are the variables that
it plugs into the formula

36
00:01:39,888 --> 00:01:42,482
to come up with its distance value?

37
00:01:42,482 --> 00:01:43,909
What are the default variables,

38
00:01:43,909 --> 00:01:47,204
otherwise known as vector metrics?

39
00:01:47,204 --> 00:01:49,755
Well hopefully you quickly
answered, bandwidth and delay.

40
00:01:49,755 --> 00:01:51,626
Bandwidth and delay are
part of that formula,

41
00:01:51,626 --> 00:01:53,167
the default formula.

42
00:01:53,167 --> 00:01:55,385
Now it's recommended that you do not touch

43
00:01:55,385 --> 00:01:57,266
the bandwidth on an interface

44
00:01:57,266 --> 00:02:00,139
because bandwidth is used
by other things as well.

45
00:02:00,139 --> 00:02:02,700
So ideally, if you wanna manipulate EIGRP,

46
00:02:02,700 --> 00:02:05,412
you're gonna manipulate
the delay variable.

47
00:02:05,412 --> 00:02:08,939
So, let's go ahead and
start by doing this.

48
00:02:08,939 --> 00:02:11,189
Let's go ahead and in here,

49
00:02:12,480 --> 00:02:15,848
let's try to take this
interface right here,

50
00:02:15,848 --> 00:02:19,174
Serial two/zero, and
let's lower the delay.

51
00:02:19,174 --> 00:02:21,555
Actually, let's lower to the minimum value

52
00:02:21,555 --> 00:02:25,555
and see if that works to
get our desired result.

53
00:02:28,250 --> 00:02:31,724
Alright, so let's go into Router one.

54
00:02:31,724 --> 00:02:34,085
Actually, I'm not sure if
when I took my last snapshot

55
00:02:34,085 --> 00:02:36,528
I had the routers turned off or not.

56
00:02:36,528 --> 00:02:38,995
So, I'm gonna go ahead
and retake that snapshot

57
00:02:38,995 --> 00:02:41,328
because I suspect I did not.

58
00:02:53,835 --> 00:02:57,774
Okay, so now let's turn them all back on

59
00:02:57,774 --> 00:03:01,282
and let's go into Router one
and go onto a Serial two/zero

60
00:03:01,282 --> 00:03:05,063
and reduce the delay to
the minimum possible value

61
00:03:05,063 --> 00:03:06,597
to make it look like
there's hardly any delay

62
00:03:06,597 --> 00:03:08,680
on that interface at all.

63
00:03:15,273 --> 00:03:18,541
Interface Serial two/zero
and we'll say delay

64
00:03:18,541 --> 00:03:21,407
and the lowest number I can select is one,

65
00:03:21,407 --> 00:03:23,361
which actually because
it's tens of microseconds

66
00:03:23,361 --> 00:03:24,631
means I'm telling him the delay

67
00:03:24,631 --> 00:03:27,714
on that interface is 10 microseconds.

68
00:03:29,477 --> 00:03:31,515
Save my config,

69
00:03:31,515 --> 00:03:33,348
sho ip eigrp topology,

70
00:03:37,615 --> 00:03:41,580
and remember the way this works is that

71
00:03:41,580 --> 00:03:43,542
after your prefix or your network,

72
00:03:43,542 --> 00:03:45,330
what you'll see first in this output

73
00:03:45,330 --> 00:03:49,740
is the successor, or if you
have more than one successor,

74
00:03:49,740 --> 00:03:53,907
the successors, followed
by the feasible successors.

75
00:03:54,759 --> 00:03:56,049
Okay so in this particular case

76
00:03:56,049 --> 00:03:58,519
it's still using fastethernet zero/zero.

77
00:03:58,519 --> 00:03:59,859
Nothing has changed.

78
00:03:59,859 --> 00:04:03,419
Okay, that being the case, let's
go back to our topology now

79
00:04:03,419 --> 00:04:07,586
and try lowering the delay
on this upstream interface

80
00:04:09,607 --> 00:04:11,960
and see if that will also work.

81
00:04:11,960 --> 00:04:13,826
So that is, what is that?

82
00:04:13,826 --> 00:04:17,826
That is Serial two/one on Router two.

83
00:04:21,394 --> 00:04:23,061
We'll minimize this.

84
00:04:24,793 --> 00:04:28,960
Actually we'll maximize it, and
let's go back to Router two.

85
00:04:33,978 --> 00:04:37,978
Interface Serial two/one delay of one

86
00:04:39,610 --> 00:04:43,511
Save that, we're not gonna
need Router two anymore.

87
00:04:43,511 --> 00:04:45,457
Close him down, alright,

88
00:04:45,457 --> 00:04:48,540
did that make Router one switch over?

89
00:04:50,665 --> 00:04:53,665
Nope, still using the fast Ethernet.

90
00:04:54,586 --> 00:04:58,469
Okay, now before we resort to
modifying bandwidth values,

91
00:04:58,469 --> 00:05:01,113
is there anything else
we can do with delay?

92
00:05:01,113 --> 00:05:05,342
Well, in our topology here,
we lowered the delay of these

93
00:05:05,342 --> 00:05:07,860
as far as we can possibly go.

94
00:05:07,860 --> 00:05:10,777
Why don't we take the
reverse approach now?

95
00:05:10,777 --> 00:05:14,944
And why don't we go to Router
one's upstream interface

96
00:05:15,790 --> 00:05:19,465
and increase the delay to
some really horrible number?

97
00:05:19,465 --> 00:05:21,680
So he thinks that anything
going out that interface

98
00:05:21,680 --> 00:05:24,263
will experience a lot of delay.

99
00:05:26,075 --> 00:05:28,105
So let's go back to Router one.

100
00:05:28,105 --> 00:05:29,605
We're still there.

101
00:05:30,508 --> 00:05:34,107
Interface fast Ethernet zero/zero, delay,

102
00:05:34,107 --> 00:05:38,320
and let's give him some
delay of like 55555.

103
00:05:38,320 --> 00:05:40,909
So 55 and that's tens of microseconds,

104
00:05:40,909 --> 00:05:43,492
so that'll actually be 555,550.

105
00:05:49,905 --> 00:05:52,488
Okay, did that make him change?

106
00:05:55,688 --> 00:05:59,417
Nope, still using that fast Ethernet.

107
00:05:59,417 --> 00:06:01,464
Hasn't switched over yet.

108
00:06:01,464 --> 00:06:04,515
Oh, there we go, it
did work. Look at that.

109
00:06:04,515 --> 00:06:08,631
Now the 44 network, the next
line which is the successor,

110
00:06:08,631 --> 00:06:11,039
is showing as Serial two/zero.

111
00:06:11,039 --> 00:06:12,872
Now we do sho ip route

112
00:06:14,053 --> 00:06:17,251
We can now see that the
44 network is indeed

113
00:06:17,251 --> 00:06:20,834
going across the top
path, the serial link.

114
00:06:22,330 --> 00:06:26,247
Now I can verify that by
doing trace 44.44.44.4

115
00:06:30,094 --> 00:06:33,427
And we can see the first hop was 1.2.1.2

116
00:06:37,308 --> 00:06:40,738
which was right here, Router two,

117
00:06:40,738 --> 00:06:43,488
and then the next hop was 2.4.2.4

118
00:06:45,653 --> 00:06:48,652
which was this address right here.

119
00:06:48,652 --> 00:06:50,734
Now as of this point, I'm gonna go ahead

120
00:06:50,734 --> 00:06:52,044
and stop the video at this point.

121
00:06:52,044 --> 00:06:53,827
We're not entirely done,
so if you're doing this

122
00:06:53,827 --> 00:06:56,537
on your own, you're almost there.

123
00:06:56,537 --> 00:07:00,291
We've got packets from Router
one going to Router four,

124
00:07:00,291 --> 00:07:02,076
taking the top link.

125
00:07:02,076 --> 00:07:05,755
But, that's not going to
affect the return traffic.

126
00:07:05,755 --> 00:07:08,240
Router four is still gonna believe

127
00:07:08,240 --> 00:07:09,980
that to get back to Router one,

128
00:07:09,980 --> 00:07:11,784
he should go across this bottom path.

129
00:07:11,784 --> 00:07:12,703
So right now what we have

130
00:07:12,703 --> 00:07:14,929
is what's called asymmetric routing,

131
00:07:14,929 --> 00:07:17,750
where packets going in one
direction take one path,

132
00:07:17,750 --> 00:07:20,174
and the reply packets take another.

133
00:07:20,174 --> 00:07:21,950
How can we verify that?

134
00:07:21,950 --> 00:07:24,367
Well, let's go to Router four

135
00:07:25,724 --> 00:07:29,891
and let's see if he was to
ping back to the 11 network,

136
00:07:31,143 --> 00:07:33,725
what path would he take?

137
00:07:33,725 --> 00:07:35,116
And we can see that right now,

138
00:07:35,116 --> 00:07:37,646
he's still taking the lower link.

139
00:07:37,646 --> 00:07:39,415
So in order to complete this lab,

140
00:07:39,415 --> 00:07:41,933
you're gonna have to
continue manipulating metrics

141
00:07:41,933 --> 00:07:45,120
until Router four also believes

142
00:07:45,120 --> 00:07:48,365
that he should take the
upstream serial link.

143
00:07:48,365 --> 00:07:52,152
And just in case you get stuck with that,

144
00:07:52,152 --> 00:07:54,952
what you're gonna do
is sort of the reverse

145
00:07:54,952 --> 00:07:57,078
of what we just did, so you're going to,

146
00:07:57,078 --> 00:08:01,477
on Router four, decrease,
minimize the delay

147
00:08:01,477 --> 00:08:04,659
on this interface down to one,

148
00:08:04,659 --> 00:08:09,246
minimize the delay on this
interface down to one,

149
00:08:09,246 --> 00:08:11,013
and then you're gonna wanna maximize

150
00:08:11,013 --> 00:08:14,868
or really increase the delay
on the fast Ethernet interface

151
00:08:14,868 --> 00:08:17,307
to make it look like it's just horrible

152
00:08:17,307 --> 00:08:19,432
and you don't wanna go that direction.

153
00:08:19,432 --> 00:08:23,290
And that will allow Router
four to take the top link.

154
00:08:23,290 --> 00:08:25,459
And that concludes this video series on

155
00:08:25,459 --> 00:08:27,959
our CCNA EIGRP lab using GNS3.

156
00:08:32,513 --> 00:08:35,430
(electronic music)

