1
00:00:02,546 --> 00:00:05,213
(intense music)

2
00:00:08,695 --> 00:00:10,088
- Okay so let's start Part 1 of this lab

3
00:00:10,088 --> 00:00:13,355
by actually bringing up
GNS3, naming our project,

4
00:00:13,355 --> 00:00:15,490
and then importing our various nodes,

5
00:00:15,490 --> 00:00:17,566
dragging and dropping
them where they need to be

6
00:00:17,566 --> 00:00:20,013
and then connecting them
via the add a link tool.

7
00:00:20,013 --> 00:00:23,286
So let's go ahead and start doing that.

8
00:00:23,286 --> 00:00:25,410
So if you haven't already done so,

9
00:00:25,410 --> 00:00:27,538
I would recommend that
you take a screenshot

10
00:00:27,538 --> 00:00:31,327
of this image so that you
can follow along with me here

11
00:00:31,327 --> 00:00:32,398
because I'm gonna move this off

12
00:00:32,398 --> 00:00:34,815
to my other screen as I work.

13
00:00:37,496 --> 00:00:40,723
Okay, so let's go ahead and start GNS3

14
00:00:40,723 --> 00:00:42,519
and we will name this project.

15
00:00:42,519 --> 00:00:43,621
You can name it whatever you want,

16
00:00:43,621 --> 00:00:46,871
I'm just gonna name it CCNA-Switch-Lab.

17
00:00:52,235 --> 00:00:54,068
And then I'll save it.

18
00:00:57,913 --> 00:01:01,018
Okay, so let's start
building this up here.

19
00:01:01,018 --> 00:01:03,185
According to our topology
we need three routers.

20
00:01:03,185 --> 00:01:06,897
Let's go ahead and drag
and drop those into place.

21
00:01:06,897 --> 00:01:10,075
One, and I'll just use this Shift key here

22
00:01:10,075 --> 00:01:12,242
to drag and drop two more.

23
00:01:18,477 --> 00:01:19,310
Alright.

24
00:01:21,455 --> 00:01:22,455
There we go.

25
00:01:23,746 --> 00:01:25,745
Okay, we're also gonna
need an EthernetSwitch node

26
00:01:25,745 --> 00:01:29,912
so that'll be over here in the
section on browse switches.

27
00:01:31,573 --> 00:01:34,156
So there we go, EthernetSwitch.

28
00:01:37,483 --> 00:01:39,481
Drop that into place.

29
00:01:39,481 --> 00:01:43,316
But currently, we don't
have the EtherSwitch router

30
00:01:43,316 --> 00:01:44,741
that has the EtherSwitch module in it

31
00:01:44,741 --> 00:01:46,541
so I need to add that.

32
00:01:46,541 --> 00:01:47,882
So what I'm gonna do is I'm gonna go here

33
00:01:47,882 --> 00:01:50,215
under Edit, and Preferences.

34
00:01:52,816 --> 00:01:54,316
Edit, Preferences.

35
00:01:57,100 --> 00:02:01,196
And then here under Dynamips
I'll select IOS routers,

36
00:02:01,196 --> 00:02:03,279
and then I'll select New.

37
00:02:05,271 --> 00:02:08,168
I'll use the same image I'm already using

38
00:02:08,168 --> 00:02:12,335
but this time I'm gonna
select the EtherSwitch box.

39
00:02:13,482 --> 00:02:15,158
I'm gonna give it the
appropriate amount of memory

40
00:02:15,158 --> 00:02:17,769
which I think is 256 megabits per second

41
00:02:17,769 --> 00:02:20,380
according to Cisco's feature navigator.

42
00:02:20,380 --> 00:02:22,662
And I'm not gonna populate
any of the other slots,

43
00:02:22,662 --> 00:02:25,846
I'm just gonna leave it with
the 16 port EtherSwitch module

44
00:02:25,846 --> 00:02:30,668
because I don't need to use
this thing as a router at all.

45
00:02:30,668 --> 00:02:34,835
And then lastly I wanna
compute the idle PC value.

46
00:02:37,080 --> 00:02:41,247
This'll take about a minute,
maybe a little bit less.

47
00:02:49,910 --> 00:02:53,932
There we go, we have an
idle PC, so let's OK that

48
00:02:53,932 --> 00:02:54,849
and Finish,

49
00:02:56,900 --> 00:02:57,733
Apply, OK.

50
00:02:59,510 --> 00:03:01,928
And now we should have available to us

51
00:03:01,928 --> 00:03:04,546
our EtherSwitch router,
so let's drag that,

52
00:03:04,546 --> 00:03:08,713
hit the Shift key, let go, and
yes, I do want two of them.

53
00:03:14,554 --> 00:03:19,023
Alright, let's go ahead
and add in our links.

54
00:03:19,023 --> 00:03:21,001
So Router 1 will use his FastEthernet

55
00:03:21,001 --> 00:03:23,182
and that's gonna end up being our trunk

56
00:03:23,182 --> 00:03:27,349
and we'll connect that
to FastEthernet1/0 here.

57
00:03:29,257 --> 00:03:30,984
Now remember, because
these EtherSwitch routers

58
00:03:30,984 --> 00:03:34,484
are routers, they are 3725s, the first one

59
00:03:35,596 --> 00:03:39,037
or possibly two interfaces are
actually routed interfaces.

60
00:03:39,037 --> 00:03:41,377
They don't do switch port
commands or spanning tree

61
00:03:41,377 --> 00:03:42,826
commands or anything like that.

62
00:03:42,826 --> 00:03:44,920
So for the purposes of
this lab, we're gonna stay

63
00:03:44,920 --> 00:03:47,422
away from those first two interfaces.

64
00:03:47,422 --> 00:03:49,964
Okay now let's go over here
to Router 2, same thing,

65
00:03:49,964 --> 00:03:54,131
connect his FastEthernet to
the first switch port on here.

66
00:03:55,347 --> 00:03:59,319
Okay, now let's connect our
redundant links up here,

67
00:03:59,319 --> 00:04:03,137
so we'll start at the
bottom, FastEthernet1/15

68
00:04:03,137 --> 00:04:07,619
will go to FastEthernet1/15
and FastEthernet,

69
00:04:07,619 --> 00:04:11,786
let's just say, 1/9 will
go to FastEthernet1/9.

70
00:04:15,611 --> 00:04:17,705
Alright so we're almost done.

71
00:04:17,705 --> 00:04:20,577
Now before we start connecting
stuff up to the switch,

72
00:04:20,577 --> 00:04:23,570
the EthernetSwitch, there's a problem.

73
00:04:23,570 --> 00:04:26,449
Because if I right click
on this and hit Configure

74
00:04:26,449 --> 00:04:29,563
to see what it currently
is, all of its interfaces

75
00:04:29,563 --> 00:04:32,953
are access ports, and
they're all in VLAN-1.

76
00:04:32,953 --> 00:04:35,902
And as we talked about when
we first introduced this node,

77
00:04:35,902 --> 00:04:37,634
you can't change the characteristics

78
00:04:37,634 --> 00:04:39,851
of an existing interface.

79
00:04:39,851 --> 00:04:41,535
You either have to delete that interface

80
00:04:41,535 --> 00:04:44,898
and then recreate it with
the characteristics you want,

81
00:04:44,898 --> 00:04:47,566
or add a brand new interface
so what I'm gonna do is

82
00:04:47,566 --> 00:04:50,483
I'm just gonna delete all of these.

83
00:04:53,389 --> 00:04:55,730
Alright, that looks alright.

84
00:04:55,730 --> 00:04:59,813
And now, remember, according
to our diagram here,

85
00:05:01,602 --> 00:05:04,351
we needed to have a
total of three interfaces

86
00:05:04,351 --> 00:05:06,284
on that Ethernet Switch Node.

87
00:05:06,284 --> 00:05:08,784
One of them had to be 802.1q,

88
00:05:08,784 --> 00:05:11,700
one of them had to be an
access port in VLAN-2,

89
00:05:11,700 --> 00:05:15,149
and the other one had to be
an access port in VLAN-3.

90
00:05:15,149 --> 00:05:16,585
So we need to be aware of that

91
00:05:16,585 --> 00:05:20,679
as we create these
interfaces from scratch.

92
00:05:20,679 --> 00:05:23,221
So here we go, I'll have interface 1

93
00:05:23,221 --> 00:05:25,554
be my access port in VLAN-2.

94
00:05:28,680 --> 00:05:32,847
I'll have interface 2 be
my access port in VLAN-3.

95
00:05:34,008 --> 00:05:38,091
And I'll have interface
3 have a native VLAN of 1

96
00:05:40,529 --> 00:05:42,446
and be an 802.1q trunk.

97
00:05:47,092 --> 00:05:49,675
Apply, OK, now before I forget,

98
00:05:51,608 --> 00:05:54,191
I should write that on my diagram.

99
00:05:54,191 --> 00:05:57,858
So this is interface
1, this is interface 2,

100
00:05:59,811 --> 00:06:02,561
and this is interface 3, alright.

101
00:06:05,325 --> 00:06:06,543
Now when you do it in your own lab,

102
00:06:06,543 --> 00:06:08,798
you can use whatever
interface numbers you want,

103
00:06:08,798 --> 00:06:11,590
but it is important that
you have the dot1q trunk

104
00:06:11,590 --> 00:06:14,337
and the VLANs where
they're supposed to be.

105
00:06:14,337 --> 00:06:16,347
Alright so let's go ahead and
connect our interfaces here

106
00:06:16,347 --> 00:06:20,077
so Router 3 connect his
FastEthernet port to port 3,

107
00:06:20,077 --> 00:06:21,577
which is my trunk.

108
00:06:22,662 --> 00:06:26,829
Router 2 connect
FastEthernet0/1 to port 1,

109
00:06:29,424 --> 00:06:33,591
and connect FasteEthernet1/0 to port 2.

110
00:06:37,576 --> 00:06:41,620
Alright, and that completes
our physical connection.

111
00:06:41,620 --> 00:06:43,590
Everything is where it needs to be now

112
00:06:43,590 --> 00:06:46,673
so at this point I can minimize that.

113
00:06:47,987 --> 00:06:52,303
And I can zoom in a little
bit to see a little bit more.

114
00:06:52,303 --> 00:06:54,323
Now before I finish
this off, let's go ahead

115
00:06:54,323 --> 00:06:58,490
and click on the
Show/Hide interface labels

116
00:07:00,577 --> 00:07:04,485
so that we know which
interfaces are where.

117
00:07:04,485 --> 00:07:05,883
And of course they get a little bit sloppy

118
00:07:05,883 --> 00:07:07,242
especially when some of these interfaces

119
00:07:07,242 --> 00:07:09,492
are so close to each other.

120
00:07:14,028 --> 00:07:16,217
Okay so this is why I drew
everything on my white board

121
00:07:16,217 --> 00:07:20,301
because I know that 1 is here, 2 is here,

122
00:07:20,301 --> 00:07:22,301
that's like that, and...

123
00:07:26,588 --> 00:07:28,855
Now I don't remember which
interface on Router 2

124
00:07:28,855 --> 00:07:31,125
connected to the switch but
fortunately I can just hover

125
00:07:31,125 --> 00:07:34,047
over Router 2 and it'll tell me.

126
00:07:34,047 --> 00:07:37,547
It says that FastEthernet0/0...

127
00:07:39,405 --> 00:07:40,558
Let's see here, here we go.

128
00:07:40,558 --> 00:07:43,606
FastEthernet0/1 is
connected to port 1, okay

129
00:07:43,606 --> 00:07:47,511
so FastEthernet, let me
just hover over that again

130
00:07:47,511 --> 00:07:48,912
in case you couldn't see it.

131
00:07:48,912 --> 00:07:51,745
You can notice down on the bottom.

132
00:07:54,003 --> 00:07:56,554
Well, it got rid of that
when I entered this tool,

133
00:07:56,554 --> 00:07:59,396
but you can see it right there.

134
00:07:59,396 --> 00:08:01,229
Come on, come back up.

135
00:08:02,565 --> 00:08:05,162
There it is, FastEthernet0/1 is connected

136
00:08:05,162 --> 00:08:09,329
to switch 1 on port 1,
that's what I needed to see.

137
00:08:10,760 --> 00:08:15,456
So 0/1 goes up here, 1/0 goes down here,

138
00:08:15,456 --> 00:08:20,436
let's just move his name off
to the side a little bit.

139
00:08:20,436 --> 00:08:22,686
Okay, and if we go up here,

140
00:08:24,188 --> 00:08:28,105
we just know these numbers
match on both sides.

141
00:08:30,738 --> 00:08:33,457
Okay, and that concludes this section

142
00:08:33,457 --> 00:08:36,290
on building the physical topology.

143
00:08:37,354 --> 00:08:40,104
(intense music)

